Hi guys =)
After I unlocked bootloader and flashed a custom Kernel, my phone started freezing and sometimes it gets stuck on a bootloop. I've flashed two custom Kernels and the stock one, but nothing seems to help My phone freezing happens frequently. And I can notice some glitches when listening to music or using Chrome. Sometimes I'm doing nothing and it freezes. After a couple of minutes frozen I can use it again.
Do you have any idea on how to fix it? It's quite annoying if I must say.
Latest firmware btw. Rooted.
igohenrique said:
Hi guys =)
After I unlocked bootloader and flashed a custom Kernel, my phone started freezing and sometimes it gets stuck on a bootloop. I've flashed two custom Kernels and the stock one, but nothing seems to help My phone freezing happens frequently. And I can notice some glitches when listening to music or using Chrome. Sometimes I'm doing nothing and it freezes. After a couple of minutes frozen I can use it again.
Do you have any idea on how to fix it? It's quite annoying if I must say.
Latest firmware btw. Rooted.
Click to expand...
Click to collapse
If you're using Phantom Kernel, may I suggest you to try version 4.5 like @faizalotai said to me on this. When I was using latest version, my phone freezes every time, but the downgrade solved the problem. You can get the v4.5 from attachments
It's exactly the lastest version I have flashed on my phone. I'll give it a shot. Thanks =D
You can try to use thunder zap kernel too.
Sent from my C2105 using xda app-developers app
srcharged said:
You can try to use thunder zap kernel too.
Sent from my C2105 using xda app-developers app
Click to expand...
Click to collapse
I've never used TZ, 'cause I read in other posts that it mess up a bit the modules and kernel files, besides phone's heat up a lot and for some users they can only change kernel after a fresh FTF flash. Is this true?
NO!!
DsvCdsSoftware said:
I've never used TZ, 'cause I read in other posts that it mess up a bit the modules and kernel files, besides phone's heat up a lot and for some users they can only change kernel after a fresh FTF flash. Is this true?
Click to expand...
Click to collapse
Most certainly no! cos i have flashed phantom and back to TZ and then again to phantom and so on loads of times..
i never had any problems. And everything is working crisply for me. No heating issues, nothing..
Im on CM11. Using TZ 4.1 r-2
I'm using. 14 firmware yet, cause I need Bluetooth in my work, but this issues I told you are in 4.2.2, but I'm thinking in giving a chance to TZ
Sent from my C2104 using XDA Premium 4 mobile app
Sure!
DsvCdsSoftware said:
I'm using. 14 firmware yet, cause I need Bluetooth in my work, but this issues I told you are in 4.2.2, but I'm thinking in giving a chance to TZ
Sent from my C2104 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Just give it a try and let me know. Use the Voltage table given by him. And soon we will have bluetooth on our devices. Its all set already!
Thanks, @DsvCdsSoftware It worked! No more phone freezing! I also flashed PurePerformances™X, it's just perfect =)
Related
Hi
I bought my device a few months ago and it was working perfectly, then one day, all of a sudden the keyboard just started lagging, alot, I couldnt type a single word properly without it getting stuck. I tried updating to Custom ROMs and also to the latest Stock Rom (2.3.6 XWLF3) but after a few hours, the keyboard goes back to lagging. I have tried formatting, factory reset, through the phone and the recovery, but it is still giving me the same problem. Please help.
And btw, I have looked through a lot of forums and websites, but I havent really got a proper answer
flash UC kernel pal. the latest version.
or you can also wipe dalvik cache. and also the most common solution is always activate autorotate screen. many experienced before in stock roms when you deactivate autorotate screen, the keyboard lags.
Okay Ill try it and let you know, thanks
Sent from my GT-I9003 using xda app-developers app
Okay Ill try this also and let you know, thank you
Sent from my GT-I9003 using xda app-developers app
marshygeek said:
flash UC kernel pal. the latest version.
Click to expand...
Click to collapse
Uhmm...can you give me the link for UC Kernel for XWLF3, cause i couldnt find it for this version
Thank You
try this. http://icxperia.com/napstar/sgsl/UC-KERNEL-v15-XXKPQ-GT-I9003_PDA .tar
i dont know why but my cell frezze and restart frecuently, especially when using ics or jb (frecuently most in ANY JB to date) ...actually im using jb liquid smooth and is very nice but i touch a lot my phone and going to a app to another one and suddenly...the bootloader logo..or...the samsung logo what can i do, i know what im doing when it is about to flash a phone...but kernels or modem...not much, i aprecciate the help
Rockman EXE said:
i dont know why but my cell frezze and restart frecuently, especially when using ics or jb (frecuently most in ANY JB to date) ...actually im using jb liquid smooth and is very nice but i touch a lot my phone and going to a app to another one and suddenly...the bootloader logo..or...the samsung logo what can i do, i know what im doing when it is about to flash a phone...but kernels or modem...not much, i aprecciate the help
Click to expand...
Click to collapse
Are you restoring app and data with titanium backup , the more details you can give the more help you will receive
Sent from my Galaxy Nexus using Xparent SkyBlue Tapatalk 2
yes and no, i try for a long time download all apps again one by one and i get the same results...so when i use TB is from jb to jb data, another detail is that my cell gets hotter when usin wifi i dont know it is normal...and the ram is always 100~200mb free space...and sometimes close apps like facebook or opera by itselfs
Rockman EXE said:
i dont know why but my cell frezze and restart frecuently, especially when using ics or jb (frecuently most in ANY JB to date) ...actually im using jb liquid smooth and is very nice but i touch a lot my phone and going to a app to another one and suddenly...the bootloader logo..or...the samsung logo what can i do, i know what im doing when it is about to flash a phone...but kernels or modem...not much, i aprecciate the help
Click to expand...
Click to collapse
I'm also on liquid smooth and was experiencing the force closes ,come to find out I was using the wrong gapps , did you edit the build.prop tweaks at all I noticed when I changed the vnheapsize my phone would not sleep and when I hit the power button it would reboot , you may want to do a complete wipe and start over and then run unmodified for a while to see if the problem persists
Sent from my Galaxy Nexus using Xparent SkyBlue Tapatalk 2
SIGMAxB said:
I'm also on liquid smooth and was experiencing the force closes ,come to find out I was using the wrong gapps , did you edit the build.prop tweaks at all I noticed when I changed the vnheapsize my phone would not sleep and when I hit the power button it would reboot , you may want to do a complete wipe and start over and then run unmodified for a while to see if the problem persists
Sent from my Galaxy Nexus using Xparent SkyBlue Tapatalk 2
Click to expand...
Click to collapse
i got yustun bean BTW...i got force closing in facebook and opera mobil and gmail sometimes...anyway...i didnt kno about edit build prop tweaks and i starting to using right now and se what happens...i found no much codes to paste in build prop, if you have some of them, you can paste here, so, when you say unmodified you mean like stock? ok there was a time that i use stock in girgenbread and works fine but is ginger, i really like ics and jb, in girgenbread often got black display and then lost my signal...but no restart no frezze...but ill give a try again to be unmodified but if u got some other tips i ill aprecciatee thanks
Rockman EXE said:
i got yustun bean BTW...i got force closing in facebook and opera mobil and gmail sometimes...anyway...i didnt kno about edit build prop tweaks and i starting to using right now and se what happens...i found no much codes to paste in build prop, if you have some of them, you can paste here, so, when you say unmodified you mean like stock? ok there was a time that i use stock in girgenbread and works fine but is ginger, i really like ics and jb, in girgenbread often got black display and then lost my signal...but no restart no frezze...but ill give a try again to be unmodified but if u got some other tips i ill aprecciatee thanks
Click to expand...
Click to collapse
I believed that's your problem the Justin bean gapps try the link provided for gapps the dev provides specific instructions for a reason.hope that helps
Sent from my SGH-I997 using Xparent SkyBlue Tapatalk 2
Hey there, I have a similar issue, also running liquid smooth, where the infuse restarts and boot loops until I press the power button, then it starts up normally.
First I thought it was Pandora because it restarted when pressed on it but it also happens when I just text. It seems random. I have almost no apps installed and performed cache, davlik, data wipes before flashing the Rom.
I have around two reboots a day, and the battery drain it's pretty high, sometime when it restarts from the boot loop I have lost 3 or 4 percent of the battery just by rebooting... any ideas?!
Sent from my SGH-T999 using xda premium
ami2510 said:
Hey there, I have a similar issue, also running liquid smooth, where the infuse restarts and boot loops until I press the power button, then it starts up normally.
First I thought it was Pandora because it restarted when pressed on it but it also happens when I just text. It seems random. I have almost no apps installed and performed cache, davlik, data wipes before flashing the Rom.
I have around two reboots a day, and the battery drain it's pretty high, sometime when it restarts from the boot loop I have lost 3 or 4 percent of the battery just by rebooting... any ideas?!
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
yes...that is what it happen to my phone..but i edit build.crop tewaks and no restart from yesterdey.with liquid rom very nice rom...but a solution i dont have yet
Can you please explain what you did to get rid of the restarts? Sorry I'm a noob when it comes to the infuse 4g... thanks man!
Sent from my SGH-T999 using xda premium
ami2510 said:
Can you please explain what you did to get rid of the restarts? Sorry I'm a noob when it comes to the infuse 4g... thanks man!
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Well the problem is not solved at all, but if has decreased markedly the reboots and the battery drainig problem, edit the file build.crop and place a few tweaks...check the super everything tread, in the mods part, you must search and find some mods tweaks and tutorials to work with
Hey man, I took a risk and sent my phone in to get the power button repaired and voila, after the repair I have not had a single reboot. My phone is around 15 months old and was rebooting more and more frequently. I hope this helps you as well!
Sent from my SGH-T999 using xda premium
I've tried flashing v4 probably 4 or 5 times now. I've even tried v3 a couple times. Neither stuck... Ove contemplated just factory reset then going through the whole process again..
What am I doing wrong/not doing?
All caches get wiped before flash.
EDIT: I was just able to flash over the ElementalX kernel just fine. I'm still confused on why Beastmode isn't flashing. When I go to install from TWRP, the .zip install time is no less than 2-3 seconds long and then it says finished.
Sent from my HTC One XL using xda app-developers app
Really... 151 views and not one person has a suggestion?
Sent from my HTC One XL using xda app-developers app
The kernel didn't stick or the CPU settings?
I went into setcpu and it said min 384 max 384 after flashing the kernel.. so I sent min to 384 and max to 1809 and applied set on boot. That worked for.me, but I notice a few bugs. Like the lockscreen won't unlock so I have to hard reboot
Sent from my HTC One XL using xda app-developers app
The kernel...
Sent from my HTC One XL using xda app-developers app
Myrder said:
I've tried flashing v4 probably 4 or 5 times now. I've even tried v3 a couple times. Neither stuck... Ove contemplated just factory reset then going through the whole process again..
What am I doing wrong/not doing?
All caches get wiped before flash.
Sent from my HTC One XL using xda app-developers app
Click to expand...
Click to collapse
Don't post threads unless you've tried full wipe. No one knows what's wrong if you're doing a dirty flash.
Myrder said:
The kernel...
Sent from my HTC One XL using xda app-developers app
Click to expand...
Click to collapse
Works for me and I use SetCPU..
Might just do a factory reset and see if that won't solve my problem.
Sent from my HTC One XL using xda app-developers app
work yet? I have the same problem and i am on stock .....wiped dalvik,cache, before i flashed it....it just says sucessfully installed...it flashes very quickly for some reason when I know it should not...did a recovery before i flashed, recovered....still nothing..
Literally just did the factory reset and didn't do a thing. So I just rebooted my backup and am now going on about my business. I'm almost to the point of giving up unless something else pops in my head besides running my RUU and then trying to flash again... too dang lazy for that right now. been trying to think all day and now I have quite a few beers in me, it wouldn't be safe.
Myrder said:
Literally just did the factory reset and didn't do a thing. So I just rebooted my backup and am now going on about my business. I'm almost to the point of giving up unless something else pops in my head besides running my RUU and then trying to flash again... too dang lazy for that right now. been trying to think all day and now I have quite a few beers in me, it wouldn't be safe.
Click to expand...
Click to collapse
Don't do it! IceColdJelly isn't worth it!
absolutelygrim said:
Don't do it! IceColdJelly isn't worth it!
Click to expand...
Click to collapse
Lol, I should say that it would only be a test.. There is no way I am getting rid of ViperXL 2.1.2. Love this ROM.
You think I may have done something with my phone to where it wouldn't install v4 when I tried to flash over the ViperX ROM do you? I keep thinking about that, I don't know if that would have any effect on anything considering I was able to RUU back to stock and flash my current ROM.
Myrder said:
Lol, I should say that it would only be a test.. There is no way I am getting rid of ViperXL 2.1.2. Love this ROM.
You think I may have done something with my phone to where it wouldn't install v4 when I tried to flash over the ViperX ROM do you? I keep thinking about that, I don't know if that would have any effect on anything considering I was able to RUU back to stock and flash my current ROM.
Click to expand...
Click to collapse
That brings up a good point.. but since your RUU'ed it should have gotten rid of any corruption applied by the international ROM..
edit: btw, IceColdJelly is an international ROM that will brick your phone,, currently there is no fix (for 2.20).. don't even try it buddy
absolutelygrim said:
That brings up a good point.. but since your RUU'ed it should have gotten rid of any corruption applied by the international ROM..
edit: btw, IceColdJelly is an international ROM that will brick your phone,, currently there is no fix (for 2.20).. don't even try it buddy
Click to expand...
Click to collapse
This I know, I saw that when I found ViperX 2.6 in the international thread... Going to try the stabilizer from the v4 thread and see if that will work. read a post about page 14 +/- a page said to try the stabilzer and see if that would work.
Edit: Speaking of no fix for bricked 2.20, how's that coming? Jtag looking like the only method so far? Haven't read your WIP thread in awhile.
Edit2: Stabilizer didn't do a thing. I really want to be able to flash this kernel... :crying: Seems like it does a really nice job for everyone that has it working... Might end up with going back to RUU again, when I feel I am competent in flashing everything correctly, in the next day or so.
So I've tried another option..
Trying to pull the boot.img from the kernel using "adb pull /tmp/abootimg". Since that looks like where it makes the boot.img in Aroma. Didn't work.
Just flashed ElementalX v1.14 and that works just fine.
I have installed [ROM][15-Feb][STABLE+SMOOTH+FAST] NightlyFourE ICS 5.3.1 REMAKE . on my P500, but I have problems with the touchscreen.
About 2 minutes it's working fine, and then it's not working at all about a half a minute.
I've tried to install this kernel http://forum.xda-developers.com/showthread.php?t=929941 which it said to be resolving this, but after restart it got stucked on android logo and I had to flash my phone once again.
Can you point me to an update or something to fix this bug and work with this rom??
crissoo7 said:
I have installed [ROM][15-Feb][STABLE+SMOOTH+FAST] NightlyFourE ICS 5.3.1 REMAKE . on my P500, but I have problems with the touchscreen.
About 2 minutes it's working fine, and then it's not working at all about a half a minute.
I've tried to install this kernel http://forum.xda-developers.com/showthread.php?t=929941 which it said to be resolving this, but after restart it got stucked on android logo and I had to flash my phone once again.
Can you point me to an update or something to fix this bug and work with this rom??
Click to expand...
Click to collapse
Well you have flashed the wrong kernel. That kernel is for froyo/gingerbread. You are using ICS which shoulsld use this: http://forum.xda-developers.com/showthread.php?t=2140930
Sent from my LG-P500 using xda premium
allenwalker1998 said:
Well you have flashed the wrong kernel. That kernel is for froyo/gingerbread. You are using ICS which shoulsld use this: http://forum.xda-developers.com/showthread.php?t=2140930
Sent from my LG-P500 using xda premium
Click to expand...
Click to collapse
Thanks a lot.. I'll try it and see if there is an improvement of touchscreen.
crissoo7 said:
Thanks a lot.. I'll try it and see if there is an improvement of touchscreen.
Click to expand...
Click to collapse
I installed the kernel for ICS. I don't know what to say.. it might be a hardware problem. The problem is still there. The touchscreen is working fine and smooth for a short period of time, and then suddenly it stops working. To make it work again I have to lock and unlock the phone... I'm waiting other suggestion... maybe someone who had that problem... or anything about this problem.
Thanks anyway.
Ok change rom problem fixed
Sent from my LG-P500 using xda app-developers app
So, something weird has been happening of late with my phone. During normal use, it suddenly hangs for a few seconds and then crashes, BSoD! I thought that was only exclusive to Windows. It has happened over 4-5 times now(in time span of a week) and I'm getting concerned. It certainly isn't ROM/Kernel issue as I've changed from Omni to Slim to CM, with stock kernel or others. The only thing I haven't tried is reverting back to Sony's stock ROM (because installing drivers on Windows 8 is absolute pain in the ass).
Here are a couple of images. http://i.imgur.com/9VtrxHl.jpg; http://i.imgur.com/E24EC2f.jpg (Please ignore the smudge )
Does any of you have any suggestions or any idea what the problem could be about? H/w?
With which rom you is this happening? To me it happened to me while using carbon 4.4
Enviado desde mi C2105 usando XDA Premium HD app
It used to happen to me on CM11 every once in a while, but I've been on Omni for the past 3 weeks and I've never encountered any BSOD's here
Oh and I think you meant 'stock' rom not stoke lol
Stronger1101 said:
With which rom you is this happening? To me it happened to me while using carbon 4.4
Enviado desde mi C2105 usando XDA Premium HD app
Click to expand...
Click to collapse
Currently, CyanogenMod. Happened on Omni ROM too.
Joel16 said:
It used to happen to me on CM11 every once in a while, but I've been on Omni for the past 3 weeks and I've never encountered any BSOD's here
Oh and I think you meant 'stock' rom not stoke lol
Click to expand...
Click to collapse
I originally faced it on Omni, then switched to CM. Still facing it I'll do a full wipe and try. I haven't tried reverting back to Sony's stock ROM yet. And yeah, thanks for pointing out the typo.
Sent from a toaster using Tapatalk
AayushDhuria said:
Currently, CyanogenMod. Happened on Omni ROM too.
I originally faced it on Omni, then switched to CM. Still facing it I'll do a full wipe and try. I haven't tried reverting back to Sony's stock ROM yet. And yeah, thanks for pointing out the typo.
Sent from a toaster using Tapatalk
Click to expand...
Click to collapse
You can try flashing the stock firmware(I'd recommend the latest), then doing a clean install I believe that would fix it. Also you might wanna delete those bsod error dumps. They might eat up your storage, idk where they're located though :L
Sent from my Xperia L using XDA Free mobile app
Joel16 said:
You can try flashing the stock firmware(I'd recommend the latest), then doing a clean install I believe that would fix it. Also you might wanna delete those bsod error dumps. They might eat up your storage, idk where they're located though :L
Sent from my Xperia L using XDA Free mobile app
Click to expand...
Click to collapse
Tried finding them, they sure don't consume large memory or I'd have noticed. Yeah just downloading the stock ftf and figuring out xperia drivers on Windows 8.
Edit: Just saw that the crush dumb was indeed of considerable size. 1.05GB.
Its a common problem in kitkat based rom. can't avoid unless you move to stock
TakuyaZ said:
Its a common problem in kitkat based rom. can't avoid unless you move to stock
Click to expand...
Click to collapse
Thanks for telling me that! I actually hadn't faced it before and in last week I kept facing it again and again so thought it might be something to do with H/w, my friend who also has XL isn't facing it. I'll move to stock if it keeps happening.
AayushDhuria said:
Thanks for telling me that! I actually hadn't faced it before and in last week I kept facing it again and again so thought it might be something to do with H/w, my friend who also has XL isn't facing it. I'll move to stock if it keeps happening.
Click to expand...
Click to collapse
Its randomly appearing, according to my use, it seems that it bsod if its too laggy/ram too low/overload
TakuyaZ said:
Its randomly appearing, according to my use, it seems that it bsod if its too laggy/ram too low/overload
Click to expand...
Click to collapse
Yep, phone hangs or lags heavily before BSoD.
Sent from a toaster using Tapatalk
AayushDhuria said:
Currently, CyanogenMod. Happened on Omni ROM too.
I originally faced it on Omni, then switched to CM. Still facing it I'll do a full wipe and try. I haven't tried reverting back to Sony's stock ROM yet. And yeah, thanks for pointing out the typo.
Sent from a toaster using Tapatalk
Click to expand...
Click to collapse
Try liquidsmoth is a good rom
Joel16 said:
You can try flashing the stock firmware(I'd recommend the latest), then doing a clean install I believe that would fix it. Also you might wanna delete those bsod error dumps. They might eat up your storage, idk where they're located though :L
Sent from my Xperia L using XDA Free mobile app
Click to expand...
Click to collapse
In the External SD CARD, this BSoD problem happened to me as well at that time i was on CM11. I thought my phone got bricked but i was wrong, i pulled the battery out and then everything worked just fine and there were no issues Regarding BSoD after that, PS-I am still using CM11 Nightly Release!
I faced it when using CM Nightly, Never faced it again on Candy Kat give it a try.