Database Info

[Rom] Jelly Bean 4.1.1 for Qmobile Noir A8 by INCPak

Good things comes to those who wait - Yes now you can have AOSP Jelly Bean 4.1.1 on your Noir A8, previously we released LeWa and TouchWiz which been the most outstanding Roms but ICS 4.0.4 OS but this time JB 4.1.1
For the Screenshots : Check out this post: http://www.incpak.com/tech/qmobile-noir-a8-jellybean-4-1-1/
Ubaid ur Rehman Khan did it since today it’s his birthday too special thanks to Ali Akber who cooperated all the way to make it possible and I would like to congrats entire INCPak Team for this. In our previous Roms you checked JB Camera and Gallery ( TouchWiz ) and in LeWa the outstanding Music Player as well as SRS effects.
INCPak IS NOT RESPONSIBLE FOR ANY KIND OF DAMAGE TO YOUR PHONE, IF YOU MADE ANY MISTAKE.
NOTE: FLASH AT YOUR OWN RISK !!!
This is a Flash-able Zip file that can be flashed only from ClockWorkMod Recovery ( CWMR ) . Make sure that your phone is ROOTED before Installing ClockWorkMod Recovery. If your phone is not ROOTED than first Root Procedure and require files are there on the post click the post below:
http://www.incpak.com/alerts/root-method-qmobile-noir-a8/
And for Installing CWMR
1) Download MobileUncle MTKTools from play store.
2) Download CMWR file from either of these links.
Link I( Recovery.img )
Link II ( RECOVERY.IMG )
3) Copy CMWR(Recovery.img) to your SD card.
4) Open MobileUncle MTKTools software, select recovery update option and then select recovery.img file that you copied in to SD.
For flashing Rom follow these steps very carefully:
1) Download the ROM. (http://www.incpak.com/tech/asop-jelly-bean-4-1-1-for-no)
2. Copy the downloaded file on your SD-CARD.
3. Power off your phone.
4. Turn your phone on in recovery mode (by pressing VOLUME UP + POWER buttons).
5. Make a backup.
Select “backup and restore”. And then select “backup”. When it is done select “Go Back”.
6. Select Wipe/Data Factory Cache.
7. Select Wipe Cache Partition.
8. Go to advanced and select wipe dalvik cache.
9. Go back to the main menu.
10. Select “Install zip from sdcard” –> “Choose zip from sdcard” –> Now select “A8_4.1.1_INCPak_Fixed” –> Select ”Yes”
11. Phone will reboot itself into Jellybean.

Battery Draining issue!
What about the battery draining issue in JB rom? there is a post in INCPak that suggests not to use JB rom!

ubaid88 said:
Good things comes to those who wait - Yes now you can have AOSP Jelly Bean 4.1.1 on your Noir A8, previously we released LeWa and TouchWiz which been the most outstanding Roms but ICS 4.0.4 OS but this time JB 4.1.1
For the Screenshots : Check out this post: http://www.incpak.com/tech/qmobile-noir-a8-jellybean-4-1-1/
Ubaid ur Rehman Khan did it since today it’s his birthday too special thanks to Ali Akber who cooperated all the way to make it possible and I would like to congrats entire INCPak Team for this. In our previous Roms you checked JB Camera and Gallery ( TouchWiz ) and in LeWa the outstanding Music Player as well as SRS effects.
INCPak IS NOT RESPONSIBLE FOR ANY KIND OF DAMAGE TO YOUR PHONE, IF YOU MADE ANY MISTAKE.
NOTE: FLASH AT YOUR OWN RISK !!!
This is a Flash-able Zip file that can be flashed only from ClockWorkMod Recovery ( CWMR ) . Make sure that your phone is ROOTED before Installing ClockWorkMod Recovery. If your phone is not ROOTED than first Root Procedure and require files are there on the post click the post below:
http://www.incpak.com/alerts/root-method-qmobile-noir-a8/
And for Installing CWMR
1) Download MobileUncle MTKTools from play store.
2) Download CMWR file from either of these links.
Link I( Recovery.img )
Link II ( RECOVERY.IMG )
3) Copy CMWR(Recovery.img) to your SD card.
4) Open MobileUncle MTKTools software, select recovery update option and then select recovery.img file that you copied in to SD.
For flashing Rom follow these steps very carefully:
1) Download the ROM. (http://www.incpak.com/tech/asop-jelly-bean-4-1-1-for-no)
2. Copy the downloaded file on your SD-CARD.
3. Power off your phone.
4. Turn your phone on in recovery mode (by pressing VOLUME UP + POWER buttons).
5. Make a backup.
Select “backup and restore”. And then select “backup”. When it is done select “Go Back”.
6. Select Wipe/Data Factory Cache.
7. Select Wipe Cache Partition.
8. Go to advanced and select wipe dalvik cache.
9. Go back to the main menu.
10. Select “Install zip from sdcard” –> “Choose zip from sdcard” –> Now select “A8_4.1.1_INCPak_Fixed” –> Select ”Yes”
11. Phone will reboot itself into Jellybean.
Click to expand...
Click to collapse
I tested it personally its very nice stable fast rom but with less memory. Pls inform me when get its update

azhar63 said:
I tested it personally its very nice stable fast rom but with less memory. Pls inform me when get its update
Click to expand...
Click to collapse
I'm still using this fantastic rom and want its update. So if any body finds please inform me.

malick186 said:
What about the battery draining issue in JB rom? there is a post in INCPak that suggests not to use JB rom!
Click to expand...
Click to collapse
I don't have any battery draing issue in this fixed ROM

Any method to flash jellybean via odin....

[Port][Custom Rom] 4.1.2-Suvi Rom for Micromax Canvas A92 a.k.a. Canvas Lite

I am presenting Suvi Rom ported to Micromax Canvas A92-Canvas lite
I am not a developer and I just ported this Rom for Canvas lite,so the credit goes to the original developer bsuhas of the Suvi Rom.Here's his work http://forum.xda-developers.com/showthread.php?p=46131976
I used this as my port rom http://forum.xda-developers.com/showthread.php?p=46131976
The base rom is Canvas lite stock Rom (latest)http://forum.xda-developers.com/showthread.php?t=2505171
I used this method for porting but with helps from all around Xda community,and of course with android kitchen toohttp://forum.xda-developers.com/showthread.php?t=1908008
I have tested only the basic functionality of the Rom and it is almost bugless,
I am not responsible if you brick your device while flashing,so flash at your risk
The Rom is touchwiz based and gapps not included,So you have to download the gapps/google apps for jellybean 4.1.2 for google apps like search etc
The known bugs are lack of native full hd video player(MX Player can solve it) and inability of editing home screens...
Flashing instructions
Before doing anything take a full nandroid back up of your system
Now-
Go To Recovery Mode :
Switch off the Phone Press and hold "Volume Up & Down+ Power" Buttons
Select Recovery Mode by Volume Up
CWM:
1. - wipe data factory reset --> Yes--delete all user data
2. - wipe cache partition --> Yes--Wipe Cache
3. - advanced --> Wipe Dalvik Cache --> Yes--wipe dalvik cache
4, - Mounts and Storage--> format system --> Yes -- format system only
4. - install zip from sd --> - choose zip from sdcard --> - Suvi Rom for Canvas Lite.zip
5. - reboot System now
First reboot will take some time usually 5 minutes or so don't panic
Downlaod-http://d-h.st/5bw
And finally hit thanks button if I helped

consuming lots of ram
tried...
rom is good. sound quality is awesome !!!! but
consuming lots of ram
phone getting hand and unstable.
recent application is not pretty good.
devnagari fonts missing....
fix this issue.
after that this will be a great rom.:good:

[Recovery]Carliv Touch Recovery for Gionee Elife E3 Indian Firmware.

*****Hello Gionee Elife E3 Users*****
I have successfully Ported Carliv Touch Recovery to our Gionee Elife E3 device.
I liked the touch recovery very much even it has extra feature like Aroma file manager in recovery and back up of nvram.
All credits goes to Carliv and Master yuweng for the simple and easy instruction to build it.
Instructions:
* Download Carliv Touch Recovery.img and save it to the Root of your SDcard.
* Rename it to recovery.img
* Download and install mobileuncle Tools from play store
* Open mobileuncle Tools
* Select Recovery Update
* Select the first recovery.img (Recovery file in SDcard) showing in the list and flash it.
* Follow the instruction and reboot.....
Carliv Touch Recovery 2.4: http://d-h.st/FL6
Carliv Touch Recovery 2.5 : http://d-h.st/NBK
How to Use :
* Touch the Tab u want to do
* Swipe from right to left on the screen to go back.
* Swipe from left to right on the screen to page up.

Can i use it on the recently released e3 kitkat firmware?? And will it create battery drop problem?? Means you restart phone phone shows sudden drop in battery from 50% to 8-9%??

milav said:
Can i use it on the recently released e3 kitkat firmware?? And will it create battery drop problem?? Means you restart phone phone shows sudden drop in battery from 50% to 8-9%??
Click to expand...
Click to collapse
Yes you can use this recovery for KitKat firmware. You have to flash it with spflashtools.
I don't think the battery drop issue is because of recovery.

My experience says otherwise as whenever i have tried normal custom cwm recovery i have had these battery drop problem but with carliv and original or cwm made by rua1 roottools i never faced that problem anyways i will flash this. Though no longer using this mobile but will keep as backup

How to Install MIUI ROM v5 (4.9.26) on Galaxy Note 3 N900/N9000Q

Official MIUI ROM v5 (4.9.26) KitKat 4.4.2 Fast & Battery Friendly [OpenBeta] for Galaxy Note 3 N900/N9000Q Exynos Model is now available to download. Sawgent is the Beta Team Leader for Note 3 N900/N9000Q Exynos Model and at MIUI Device Team. Official MIUI N900 MIUI Rom has been released on 11th July 2014, 10:39 PM for everyone. This rom is official MIUI Team Rom but not a port or other developers work. It is completely Team work of Xiaomi and MIUI .
MIUI ROM v5 (4.9.26) KitKat 4.4.2
It is not Final Release yet. It's Open Beta for everyone but suitable for daily usage with all functions. Still, there are some little problem. If you face this little problem, you can report it from this topic or official MIUI bug report system.
About MIUI Roms
It is AOSP based Deodexed custom rom for many Android Phones. It includes additional functionality not found in stock Android, including a fully theme-able user interface, new music, gallery, and camera apps, and an alarm clock that rings even if the device is turned off. For more info: http://en.wikipedia.org/wiki/MIUI
Bug Report Section MIUI
http://en.miui.com/forum.php?mod=bugfeedback&fid=5
What Works:
Everything
Download Links
Rom Zip - MIUI ROM v5 Download
GApps - MIUI_OTA_Safe_Gapps_4.4_GP5.0_by Sawgent
(This gapps package does not effect OTA update and solves paid app bug with latest Google Play 5.0 app.)
Only Google Play APK - http://turbobit.net/ku1w5axp8vnx.html
Alternative GApps link - http://turbobit.net/qwt3lsq5b0nz.html
Like this MIUI ROM based on the latest Android 4.4.2? We love it too and we know you are looking forward to install it on your phone now. Now please read below for important tips on how to make sure your installation goes smooth and you do not end up with any problems.
Backup and some important tips
Done with USB Driver? Good. Now here we go for some work that you must do before installing this firmware. Please follow the important points that you need to take care of, as we don’t want anyone losing their personal data or apps:
Backup your all important data and apps because during any installation of a new custom ROM or Official Firmware , your device will be wiped and cleaned with new operating system. Make a backup for just in case, you never know when anything might go wrong.
Samsung user can also backup data by using Official Sumsang Kies. If you backup data manually, you will get more options for what to choose from. You can also move your data to other Android devices from different manufacturers, i.e moving Samsung Galaxy S5 backup data to Google Nexus 10. If you already have a custom recovery (ClockworkMod, TWRP etc.) installed on your phone, we strongly recommend a backup using that as it creates a complete image of your existing phone set up.
Few more important things that you must remember before installing any custom ROMs or Official Firmwares:
You might face some problems in connecting your Android device to the computer. How to fix? You need to enable USB debugging mode. See here: How to Enable USB Debugging — for Gingerbread, Ice Cream Sandwich and KitKat.
Make sure your Android device is charged up to 80-85% battery level. This might help you: How to Check Battery Percentage. Why? Because, if your phone goes off suddenly while installing a custom ROM, flashing an official firmware update or installing mods etc. — your phone might get bricked or go dead permanently. No one wants that, right?
Most of the tutorials and how-to guides on iDroid Horizon are for factory unlocked Android devices. We recommend NOT to try our guides if your device is locked to a carrier, unless we have specified the device model or carrier name.
All set and ready? Good. Now, let’s proceed with the tutorial below and update Galaxy Note 3 N900/N9000Q to MIUI ROM v5 (4.9.26) KitKat 4.4.2 custom firmware.
Entire Step-By-Step procedure:
Step 1 - Download MIUI ROM v5 (4.9.26) KitKat 4.4.2 and Google Apps for Galaxy Note 3 N900/N9000Q to your computer.
Step 2 - Connect and mount your Galaxy Note 3 USB memory on your computer using the USB cable.
Step 3 - Now copy/paste the downloaded MIUI ROM v5 zip file to your SD card. Make sure the file is in the SD card root (not in any folder).
Step 4 - Then turn OFF your phone and disconnect from the USB cable.
Step 5 - Now to get in the Recovery Mode. Switch ON the phone while pressing and holding Volume Up + Home + Power buttons together. You will get an exclamation mark now. Again, hold your Volume Up + Power buttons. You should now be in your Recovery Mode.
Step 6 - Once you are in ClockworkMod Recovery, select perform a full data wipe by selecting “wipe data/factory reset” Use the Power button to select everything while in the Recovery Mode.
Step 7 - Then, perform a cache wipe by selecting “wipe cache partition”
Step 8 - Now this is optional, but it is recommended to perform a wipe of your dalvik cache as well. You will not get into boot loops or any other errors. From CWM recovery, go to ‘advanced’ and then select “wipe dalvik cache”.
Step 9 - Then go back to the main recovery screen and select “install zip from SD card”.
Step 10 - Now select “choose zip from sdcard”. Using your volume keys, navigate to the MIUI ROM v5 file that you copied to your SD card and select it using the Power button. Confirm the installation on the next screen and the installation procedure should start now.
Step 11 - After the installation completes, go to “+++++Go Back+++++” and reboot the phone by selecting “reboot system now”
Note: Repeat the same step of installation as in step 10 with Google Apps after installing MIUI ROM v5.
Your Galaxy Note 3 will boot now and it might take about 5 minutes to boot on your first time. So, please wait.
That’s it! Your Galaxy Note 3 should now have MIUI ROM v5 Custom Rom installed on your phone! Go to Settings > About phone to verify.

micromax a106 ultimate-stock-kk rom

Rom Features :-
ROM Version Android 4.4.2 (stock rom)
Fastest and Most Stable ROM Ever
Specially for Gamers
More free RAM
Otg bug fixed permanently
Over Heating issue solved
Batterr multitasking
Camera works perfectly 8mp at fulscreen preview with any camera app
Battery Drain overnight minimised to 0%
UNITE2 stock animation
ROM is prerloded with gapps
Pure kitkat apps icon
Most Stable Bugless ROM Ever
Heavily Tweaked
Amazing Battery Life
fully stock rom..
Note :- Before flashing this ROM please make sure that your are on Stock Kitkat.
Step 1 :- Firstly make sure that you have successfully rooted and installed CWM Recovery in your device, After that proceed further.
Step 2 :- Now Go to Recovery Mode by pressing Vol+ and Vol – and Power Button simultaneously and do complete backup of your current rom.
Step 3 :- Now download and Place ROM zip to the root of your SD card.
Step 4 :- Again go to Recovery mode by pressing Vol+ and Vol – and Power Button simultaneously.
Step 5 :- Do a complete Wipe Data, Cache and Delvik Cache.
Step 6 :- Now Choose Install Zip from SD card & Click Yes.
Step 7 :- Wait for a while till it finishes.
Step 8 - After completion Reboot your device.
Step 9 -Enjoy your stock-ultimate rom
download link-