The problem with the performance - Xoom Q&A, Help & Troubleshooting

People need help or advice. Came to see me this tablet, but constantly overloaded. Flashing not help. Can anyone help what? Model the way mz600
UPD.
Here is such a damn thing work. Tablet flashed version 4.0.4. Sew normally without problems. But as soon as I start to work on it (the menu or just flipping pages), it hangs and reboots. But even in standby mode can be hung for the entire day. This is a problem with the loader or HW? P.S. in CWM, Fastboot and worked about 10-15 minutes, reboots discovered.

Related

[Q] Thunderbolt stuck on bootloader screen.

I rooted my TB the other day and everything went well. I've been using it with no problems until now. I wake up this morning and it's stuck on the bootloader or fastboot screen and no option that I choose allows my phone to boot up normally. Any help with this matter would be greatly appreciated. Thanks.
Similar Issue
I've had the same thing happen with mine, except after multiple boot loader reboots I can eventually get the phone to boot. Eventually it will display the message "Shutting Down" The longest it's worked before rebooting is 30 minutes, but I've not allowed the VZ update to go through. Any suggestions? Thinking of trying to flash a rom.

[Q] S3 stuck at FIrmware upgrade encountered an issue

So I have had my S3 rooted for a long while. But the past few weeks it's been running a bit slower. This week it started randomly turning off. I thought it was my battery at first. But then when I tried to turn it back on it got stuck at the Galaxy s3 screen and would not get into the OS.
I tried to get into recovery, it froze on the splash screen. I made sure both were actually frozen by leaving it sitting there for 30 min to an hour.
Tried to flash using this thread: http://forum.xda-developers.com/showthread.php?t=1974114
It kept just sitting at writing NAND.
Now my phone says "Firmare Upgrade encountered an issue, please select recovery mode in kies and try again"
Kies will not connect my device. It sees it but will not complete the connection. I tried using the model and IMEI number to upgrade firmware but it still would not connect to do that.
More searching lead me to this: http://forum.xda-developers.com/showthread.php?t=2581166&page=11
But I can't get into OS or recovery so I don't think this would work.
Any suggestions on what I can do from here? I only really need the phone to work for a few more months. My old Droid incredible just doesn't cut it at this point.
Sorry to bump, but nobody has anything for this? I haven't really found any other options.
Your bootloader is fine so that thread won't help you. What was the last version of touch wiz that was on your phone before you ran into problems?

[Q] How-to restore a TF300T with the newest firmware that is not starting up

Dear guys and girls,
I have a problem. Since 2 days my tf300t is for some reason not starting up anymore. The start screen does not go away. Before it worked like a charm. I have tried almost everything, I can think of. As far as I know the latest firmware is installed. The problem is also that the tablet isn't in developer mode. So my options are limited afaik to fastboot. I have installed the naked drivers version 0.73. But windows is saying that the device is not started. Only fastboot is started as device. I have tried to reinstall the firmware by usb, but to no avail. It sends but doesn't write... I have drained the battery to zero level. Can anyone help me with this? What am I missing?
<>< A Dieu
Jaco Oversluizen
I'm also having this same issue. Tablet was working fine and then froze up. After rebooting we are now stuck on the Asus screen with the circular logo going. Waited over an hour with no change. Tried to boot into recovery and recovery crashes and gives me Error! This is a stock tablet that hasn't been unlocked or anything.
Update: Did a Data Wipe and the device rebooted and came up. Doing all the updates again. Hopefully it wont mess up again.
So you have an unlocked bootloader ?

Need help after failed rom install

I've had some previous experience with custom roms on my old Nexus 6P and thought I would try the same for my mate 9. Unfortunately I've discovered the Mate 9 is not as easy to install custom roms as I thought.
I've tried several things throughout the day and I feel I've accidently overwritten things I shouldn't have but can't remember everything I've done.
It is an Optus branded phone so I believe at the start of the day I had some version of L09C34. I currently have an unlocked boot loader and TWRP installed and would like to flash back to the stock firmware, but seem to be unable to do so. The boot loader is unlocked and when I try flashing extracted parts from fastboot, the phone will reboot, reboot again and sit at erecovery. Unfortunately while I can connect to wifi, no packages are found for recovery.
Additionally I now get this lovely colourful screen in lieu of the logo on initial boot.
Any help would be appreciated.
Okay, so I've managed to unbrick it and install a version of L09C432 and get it working again - thank you to various threads on XDA. I think what I noticed was that someone else had tried the C432 firmware on a C33 model and it worked. Without being able to get hold of the C34 firmware, I tried to flash nougat originally and it worked.
This morning, I've noticed I still have an issue where the touchscreen won't work when the phone is cold (i.e I can't click anything and can't turn alarms off). If I reboot the phone to recovery it's fine, so it leads me to believe its an OS thing. Also, if I give it a few minutes in my pocket, or holding my palm on the screen it then responds. This is the issue I tried to resolve by resetting and trying a different rom but seems I haven't been successful.
Finally, when I first turn the phone on and the screen lights up I see a green background with one blue and one red box. Any ideas what I have messed up there and how to fix it? I'm not too concerned, but it would be a nicety.
Just providing updates in case anyone comes a long with similar issues.
I have now fixed the strange coloured screen on initial power on. I've found the oeminfo for the C432 firmware on another XDA thread and took a backup of what was currently there, restored the C432 version and rebooted. I was presented with the eRecovery and no TWRP. Quick check in fastboot mode showed the phone relocked. I unlocked it again and it booted no issues, however was unsure if the custom rom was still installed as I was presented with the option of an OTA update. Initially my sim card was not recognised, so I had to remove and reinstall it but so far so good.
I've just reflashed my custom rom and will see how I go.
The only potential issue I have outstanding is my touchscreen not working either first thing in the morning, or when the phone is cold - i.e I've gone to the gym and left it sitting in the locker for 2 hours and I can't use the touchscreen when I come back. I can unlock it fine with the finger print reader and the phsyical buttons respond but touches on the screen won't. If the phone is left alone for a few minutes the screen shuts off and turns back on approx every 5 seconds until it becomes responsive. Has anyone seen anything like this before? My googling hasn't lead me to anything helpful.

TF300T rebooting... Help!

Hi everyone.
I have a ASUS TF300T for over 10 years now. It is an awesome tablet and the last 4 years it has been my daughter's playing buddy. Around 6 years ago, as the performance of the tablet was horrible, I started to inform my self of what I could do to have a usable tablet again and that was when I found out about custom roms. So I did my research, unlocked the bootloader, installed TWRP bootloader and flash Timduru's ROM to it. It worked like a charm. Great performance and usability for the almost dead (thanks to ASUS) TF300T. Around the time Timduru's last ROM for this tablet was released, was also the last time I upgraded the TWRP to the latest version which I don't remember its version. Now to my problem... Last week my wife told me she couldn't get the tablet to work. As I looked at it, what I saw was the ASUS logo (with the device is unlocked at the top left corner) and then the Timduru's logo comes up and hangs, after a while it reboots to the ASUS logo again and just does everything the same over and over again non stop, can't even shutdown the device. If I hooked the usb cable to a PC it does the same but after 6 reboots the device shuts down. Then I tried to enter recovery so, volume down and power it on, the menu comes up as normal but now I tried to enter TWRP. Splash screen appears and reboots to the ASUS logo again. Then Linux pinguins show up at the top left corner and enters again to the TWRP splash screen and reboots. Now that's where I'm stuck at. Can't do anything. Volume down and power up don't do anything either, it always goes straight to TWRP recovery and reboots again. In the PC the Android device shows up until the tablet restarts again. Also tried adb but it always stalls or gives some strange info until the tablet restarts again. So my question is... I anyone able to help me restore this back to funcionality? My daughter would really appreciate your help guys! Thanks!
Tuzy said:
Hi everyone.
I have a ASUS TF300T for over 10 years now. It is an awesome tablet and the last 4 years it has been my daughter's playing buddy. Around 6 years ago, as the performance of the tablet was horrible, I started to inform my self of what I could do to have a usable tablet again and that was when I found out about custom roms. So I did my research, unlocked the bootloader, installed TWRP bootloader and flash Timduru's ROM to it. It worked like a charm. Great performance and usability for the almost dead (thanks to ASUS) TF300T. Around the time Timduru's last ROM for this tablet was released, was also the last time I upgraded the TWRP to the latest version which I don't remember its version. Now to my problem... Last week my wife told me she couldn't get the tablet to work. As I looked at it, what I saw was the ASUS logo (with the device is unlocked at the top left corner) and then the Timduru's logo comes up and hangs, after a while it reboots to the ASUS logo again and just does everything the same over and over again non stop, can't even shutdown the device. If I hooked the usb cable to a PC it does the same but after 6 reboots the device shuts down. Then I tried to enter recovery so, volume down and power it on, the menu comes up as normal but now I tried to enter TWRP. Splash screen appears and reboots to the ASUS logo again. Then Linux pinguins show up at the top left corner and enters again to the TWRP splash screen and reboots. Now that's where I'm stuck at. Can't do anything. Volume down and power up don't do anything either, it always goes straight to TWRP recovery and reboots again. In the PC the Android device shows up until the tablet restarts again. Also tried adb but it always stalls or gives some strange info until the tablet restarts again. So my question is... I anyone able to help me restore this back to funcionality? My daughter would really appreciate your help guys! Thanks!
Click to expand...
Click to collapse
Hi there, I'm sorry for my late replay, because I'm not often been looking up here. Here is my advice:
The only way to get out of the loop you should do a "Buster99" to get back on Stock Rom Jelly Been 4.2.2. After that you'll be able to install the CR again. Therefore you should look up all my posts within this thread over the years. There you'll also find the right links leading to Buster99. Don't forget you need "Minimal ADB and Fastboot" to do a Buster99.
All the best and good luck, ebonit
PS: Here is the link to the Buster99 solution: https://forum.xda-developers.com/showpost.php?p=44244313&postcount=12

Categories

Resources