Database Info

[Q] sony xperia u wont turn on

i installed a recovery mode using an application from the play store called acer recovery installer. then i went to the Rom manager and i choose reboot into recovery mode. the phone shuted down and it wont turn on again. laptop don't detect it anymore, and the light in the corner don't work and ymore when i put the phone on charge and i can not flash any rom anymore.
please i need help

any help ?

Don't install cwm using Rom manager
I've read issues of people having hard bricked phone due to wrong installation of cwm due to the Rom manager
Try to flash stock Rom through flashtool
That should work!
Sent from my MT11i using xda premium

actualy flashtool dont detect the phone. it wont boot in any mode

fadijabroun said:
actualy flashtool dont detect the phone. it wont boot in any mode
Click to expand...
Click to collapse
Tried re installing drivers of flashtool??
And also did you try on some other pc with the help of flashtool?
Sent from my MT11i using xda premium

yes i tried everything. the problem is that the phone dont even light or anything. its like dead. is that possible that i have a hardware problem after flashing a wrong recovery mode ?

Try to repair by downloading and using SEUS!
If that doesn't do it,I guess you better get it checked at a nearest service center!
Sent from my MT11i using xda premium

[Q] xperia st23i DEAD

Install instructions:
first time
- power off the phone:
- hold vol+ and plug usb to boot into fastboot (blu led)
- fastboot flash boot boot.img (from cm10 zip)
- fastboot reboot
- enter recovery, on boot led will be violet for 3'', during this period press vol+
- flash rom zip
- flash gapps zip
- wipe
- reboot
----------------------------------------------------------
after fast reboot i disconect device to go to recovery in cwm, but i shouldnt do that and i should waited for violet led and continue that,so my xperia miro st23i is now dead, is there any help with flashtool or similar things to revoke my phone, or i should rma it ? thank you very much ((((

Try repair using Pc Companion.
If dont work use flashtool,
Download and flash a firmware .ftf for Xperia st23.
This is a french tutorial:
http://www.phonandroid.com/forum/xperia-miro-installer-un-firmware-kernel-officiel-t30288.html
Sent from my ST25i using xda app-developers app

in device manager it says semc flash device, seus update says hone has modified software and cannot be updated, flashtool 0.9.8 see device and it says device connected in flash mode, but when i click on flash it says error preparing files, and i did download ST23i_4_0_4_xperia.ftf, that its official firmware,. help

keewee23 said:
in device manager it says semc flash device, seus update says hone has modified software and cannot be updated, flashtool 0.9.8 see device and it says device connected in flash mode, but when i click on flash it says error preparing files, and i did download ST23i_4_0_4_xperia.ftf, that its official firmware,. help
Click to expand...
Click to collapse
Download again the ftf. Follow this tutorial
http://translate.google.be/translat...aller-un-firmware-kernel-officiel-t30288.html

vol up gives adb mode, vol down gives flash mode, tryed flashboot boot boot.img, then flash reboot, nothing, tryed flashtool 0.9.9m stuck on reading device information, flashtool 0.6.8.0, says unpluged the device press and hold back button, it's xperia miro, back button is on touchscreen, help

SUCCESSFULLY FLASHED with flashtool by tutorial from that french forum, thank you, BUT, when i turn on phone it wont start green led blink once and nothing, i dont have locked bootloader maybe is that a problem?

PHONE REVIVED FROM THE DEAD :laugh:, THANK YOU, METHOD 2 from that french forum SAVED MY PHONE , THANK YOU

Sent from my ST25i using xda app-developers app

keewee23 said:
PHONE REVIVED FROM THE DEAD :laugh:, THANK YOU, METHOD 2 from that french forum SAVED MY PHONE , THANK YOU
Click to expand...
Click to collapse
did you use flashtool for reviving your phone???is it your phone is miro????please help me...my phone is dead now and i cant resurrect it...please help me...
---------- Post added at 03:48 AM ---------- Previous post was at 03:15 AM ----------
keewee23 said:
PHONE REVIVED FROM THE DEAD :laugh:, THANK YOU, METHOD 2 from that french forum SAVED MY PHONE , THANK YOU
Click to expand...
Click to collapse
i performed the method 2 from flasher official kernel.....you did perform that to revive your miro right???the problem is...i'm stucked in "reading device information" thing....did you also experienced it???should i be worrying about it??or is it normal.......any help please????please......i'm begging you and i'm stuck in this problem for a couple of days....any help and reply will be a great thing to me......

How to Fix Dead Miro
I was Flash Rom my Miro and i got dead i downloaded flash 0.8.0 and 0.8.6 but when i connect my phone it show green light but its doesn't show in flash tool show some error and closed plz help which version of flash you used . i really need help :crying:

MY TIPO STUCK AT SONY BOOT LOGO HELp

Plzz helppppppppppp

Why you posting like a noob? This is general section, post in q&a troubleshooting section.
And more details about your problem 'plzz '
Have you tried flashing stock ftf with flashtool?
Sent from my ST27i

Buddddy tried it it disconnects when is start flashing hence i posted urgent plz help
and sorry for wrong section

Flashtool Log? How dod it brick?
Sent from my ST27i

If nothing happens how i prvide log and for brick problem i realtt don't know

PLZ help

Power + vol down for flashmode,
Vol up for fastboot. What combo are you trying?
Sent from my ST27i

Power plus vol down shows green led after the flash starts it dissconects and yup I changed header file too it's a perfect ftf file

Boot loader is unlocked

PLS help

TechnoGuy1998 said:
Power plus vol down shows green led after the flash starts it dissconects and yup I changed header file too it's a perfect ftf file
Click to expand...
Click to collapse
Hmm then go into fastboot and flash fxp kernel and rom. You can come back to stock later. Bootloader must be unlocked.
Sent from my ST27i

did as u said now what

TechnoGuy1998 said:
did as u said now what
Click to expand...
Click to collapse
Fastboot worked? Fxp Rom is working?
Sent from my ST27i

Xperia Tipo won't boot

I have a Rooted Xperia Tipo running on Stock ICS I restarted it to enter fastboot mode by holding volume+ button and power button.
When I try to open it It won't open and flashes 3 Red Lights[/B]
Please help

Is your problem solve????
Pm me
Sent from my ST21i2 using xda premium

fonetalker101 said:
I have a Rooted Xperia Tipo running on Stock ICS I restarted it to enter fastboot mode by holding volume+ button and power button.
When I try to open it It won't open and flashes 3 Red Lights[/B]
Please help
Click to expand...
Click to collapse
By "entering fastboot" U mean that u wanted to access cwm?

Xperia L revert to Stock !! Help !! >

I found the bug in my XL camera flash and tried to get rid of it by flashing phantom kernel ....... the kernel comes with twrp recovery .... that didnt work out as planned ... Now i want to change to stock firm ware with stock kernel ..... but i cant as i dont have or have any flashable stock rom in .zip format which twrp / cwm recovery uses....
!! PLEASE HELP !! :crying:
I tried to convert the ftf file to .zip format but that also didnt work out as i was getting error for page file while extracting the system.sin // even after trying 2048 , 8192 , 4096 page space........
Getting stuck is really annoying !!
thanks in advance !!!
regards
ranjan

First you have to download flashtool. Then download stock ftf. Then connect phone in flashmode to computer. And flash.
Sent from my C2105 using XDA Premium 4 mobile app

adil089 said:
First you have to download flashtool. Then download stock ftf. Then connect phone in flashmode to computer. And flash.
Sent from my C2105 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
its not going to flash mode...... because of twrp (custom recovery) ............

ranjankaul said:
its not going to flash mode...... because of twrp (custom recovery) ............
Click to expand...
Click to collapse
Turn the phone off, wait a couple of seconds, press and hold Volume down(-) button insert USB cable in your phone, congrats, u've entered Flash mode

dante. said:
Turn the phone off, wait a couple of seconds, press and hold Volume down(-) button insert USB cable in your phone, congrats, u've entered Flash mode
Click to expand...
Click to collapse
flash mode is replaced by twrp !!! ............ :cyclops:

ranjankaul said:
flash mode is replaced by twrp !!! ............ :cyclops:
Click to expand...
Click to collapse
Fastboot thunderzap kernal using flashtool. Then try to enter flashmode
Sent from my C2105 using XDA Premium 4 mobile app

ranjankaul said:
flash mode is replaced by twrp !!! ............ :cyclops:
Click to expand...
Click to collapse
Hmmm, i think it cant be replaced by TWRP cuz TWRP is recovery and Flash mode is similar to fastboot state.
U tried without touching power button ofc?

I can't use the flashtool
dante. said:
Hmmm, i think it cant be replaced by TWRP cuz TWRP is recovery and Flash mode is similar to fastboot state.
U tried without touching power button ofc?
Click to expand...
Click to collapse
Hail!
For me is the same stuff... I was using the PacRom 4.4.3 version. When it get the update for 4.4.4 I think make the update of my device in a clean installation, but I can't use the flashtool... Appears a message, and the flash of ftf file is interrupted...

gbrv75666 said:
Hail!
For me is the same stuff... I was using the PacRom 4.4.3 version. When it get the update for 4.4.4 I think make the update of my device in a clean installation, but I can't use the flashtool... Appears a message, and the flash of ftf file is interrupted...
Click to expand...
Click to collapse
To make clean instal simply format system, data and both caches in ur recovery, after that instal desired ROM and kernel of ur choice

Revert to Stock Solved !! !!
Hey Guys !!
i found the way to enter the flash mode state ! :-
Step Wise :-
1. Connect your XL to PC , start the Sus .
2. It will prompt you that a new firmware is available , download the new firmware version .
3. ready your phone for the software update.
4. when the sus downloads the update , connect your phone . When you connect your phone to the sus will prompt and send your phone to flash mode state.
5. Now start flash tool and prepare the file stock rom FTF file for flashing.
6. As soon as the files are ready , it will flash the stock rom to XL
DONE !!

Download the latest firmware and flash via flashtool. :fingers-crossed: