Hi!
I have a S2 (I9100G) since 2 years.
Before switching on CyanogenMod (2013 september), I don't had any problem to connect aWiimote to play some games (via Bluetooth).
Since 2013 september, I use a I9100g with CM (10.1.3 during january. Before I was in 10.1.3RC-1 and RC2 and before in 10.1.2).
Since, impossible to use Wiimote and WiimoteController, I have a error message.
So, I bought a Wamo Pro gamepad. It work on friends S2, S4 or android tablet. But impossible to connect the Gamepad (bluetooth paring) to my phone.
The phone see the bluetooth device, I select the device, it appears that connect, but no.
It seems there is bluetooth problem on cyanogenmod without solution (driver problem).
I try almost each nightlies, without succes.
Do you have any idea?
I don't want uninstall CyanogenMod...
Unfortunately, I can't post in the CM11 dev's topic, I don't have 10 posts at this time on this forum.
thanks for your help.
Any idea?
Related
Hi,
When I decided to buy my TF300T one of the most import point was I could use internet over bluetooth since this version doesn't have 3G.
When I was on ICS I used to connect without any kind of problem .. just pair and use, simple like that.
But since I upgrade to Jelly Bean everytime I try to pair my Tablet to my cell phone the tablet abruptly reboot.
I tried everything I could think of to solve the issue:
- I did the new update to V10.4.2.13 of JB
- I removed the profile and added a new one
- I tried with another cellphone (mine is a Nokia Symbian, tried and galaxy II, same error)
- Wipe system/data
- Disabled wifi .. development mode .. usb debugging ..
- Formated my cellphone
My cellphone does allow internet over bluetooth as I was used to connect thru it everyday. I still tested on my friend's tablet (still in ICS) and it worked fine. The problem started when I upgraded from ICS to JB on my TF300T.
Does anyone have any idea what to do to get it solved?
Thank you in advance.
Leo
Hi all, I'm afraid I may be a bit out of the loop on this one, so I apologize if I'm asking about a known issue. Basically, I'm running CM10, the nightlies, and I'm currently running the April 14 build based on 4.2.2. It's been a while since I updated (frankly, it's been a while since I used the tablet) and since I did, I am unable to utilize my Nyko Playpad after pairing it to the tablet as I once did. Even if I unpair/re-pair, disable/enable BT, and reboot the tablet, it pairs, but never "connects". It works over BT just fine on my laptop, so I know it's not the controller. I haven't tried a PS3 controller yet, but that may be my next experiment. I understand that there's been problems with BT in some of the latest JB builds. Am I just encountering that, or is there something else going on? Thank you for shedding any light on the problem.
similar issue here. since the 4.1.2 update i can pair and connect ONCE. after disconnecting and attempting to reconnect it will never connect. factory reset just starts the process over again, connects once and then never again.
anyone else founda fix for this?
Hi guys,
maybe im just being stupid, but i cant seem to get the dinovo mini to work well with my MK808B plus running cyanogen mod 12 (couldnt get it to work with the original os either for that matter). I was hoping to be able to get a cursor if i put it on "mouse mode" but i cannot. It works fine in "keyboard mode" but its quite a hassle to try to get around with that.
I am using it with the dongle in the usb extension. I wanted to try to pair it directly by Bluetooth but since its the only mode of controller im using i cant really disconnect the donge and connect the BT.
so please help me guys, am i barking up the wrong tree entirely or is there hope?
Solved
It seems like i needed a good nights sleep to solve this. I just realised when i woke up that i could use a regular usb mouse to control the android stick to pair with the dinovo. After the pairing everthing worked perfectly
Hi,
Having trouble with connecting Bluetooth with a Generic Android Tab KitKat 4.4.2
I used the app 'GoNext Update' and it says the tablet cannot update further than the 4.4.2 !
Okay just spoke PayPal Here Support and they said that if it connects and works with 1 device then the prob is not with the Reader.
It works with Samsung Note 5 os 7.1 but not with the Galaxy S4 (Android 5.0.1) which says I can't update.
She did say as far as she knows it should work with the Android KitKat 4.4.2 ( an Android Tab I have) and the Samsung Galaxy S4 which I also have.
The PayPal Here software app works but it is I cannot connect Bluetooth to the PPH Reader or have it stay paired..
Maybe the PPH reader can only be paired with 1 device at a time? Whilst not not connected in the PPH software app, it still shows as paired in all devices.
I am not sure what the Generic Tablet is as it is does not have a name.
These are its specs.
Model # ba 1078
Processor Quadcore-A33
Android 4.4.2
Firmware V2 (no updates available)
Kernel 3..4.39 [email protected]#44
Fri Oct 16 14:20:42 CST 2015
Build astar_ba1078-eng 4.4.2 KVT49L 20151016
Any help please?
Thanks
oz
Looks like I have found the problem.
No thinking it was a problem. I left the PPH reader 'paired' in all devices as I tried them all.
I unpaired them all then paired just the one I need (Generic Tablet) and it worked.
Problem is it drops off after a few minutes. Maybe when one or both 'sleep'.
Can one alter this 'sleep' time or turn it off totally?
oz
Hi !
A good method to avoid any device to go to deep sleep and interrupt some processes , though the bluetooth sholdn`t do that , is to keep the screen on until it finishes the job , always on preferable
Try it out
Many thanks..
A few months ago (I forgot exactly when), I updated to the latest available herolte LineageOS build for my (rooted) S7.
As I use a Samsung Gear S2 Classic smartwatch, I went about updating build.prop to make the Galaxy Wear app work on my phone (the app works out of the box on everything except flashed Samsung phones, which is circumvented by replacing 'samsung' with 'htc' in build.prop). However, my watch would not connect anymore, despite resetting my watch, reinstalling the app, etc etc. It simply did not show up on the menu. Then I noticed that I was also unable to connect to my bluetooth speaker as well, despite it being on and working perfectly fine as before with my laptop. Scanning for bluetooth devices simply shows nothing. The smartwatch would show up for very short periods of time and then disappear again, the bluetooth speaker is still listed as 'paired' but attempting to connect to it does nothing.
So, my Bluetooth is broken after this update and I have no idea how to begin fixing this. I have not attempted reflashing my phone yet. Does anyone have any solutions or suggestions for troubleshooting?