Twrp Rom Install Help - Xoom Q&A, Help & Troubleshooting

Hello, I currently am having trouble flashing a Rom with Twrp. I have the Rom and Gapps on an Microsdhc card, but when I flash the Rom it says failed. It also says something about it not being partitioned right, but as of this post I can not remember the whole error. I would appreciate any help I can get.

AlphaColdFusion said:
Hello, I currently am having trouble flashing a Rom with Twrp. I have the Rom and Gapps on an Microsdhc card, but when I flash the Rom it says failed. It also says something about it not being partitioned right, but as of this post I can not remember the whole error. I would appreciate any help I can get.
Click to expand...
Click to collapse
What rom is it? Did you do big partition?

Related

recovery mode help

hi, ive been putting the nightly roms on and ive updated a few times, now when i go into recovery mode and try to apply zip file from sd it takes me to internal memory instead of external sd, can someone help me please
what recovery you have on?
i have clockworkmod recovery, cheers
mingmong24 said:
i have clockworkmod recovery, cheers
Click to expand...
Click to collapse
He's asking what version. You should have v3.2.0.0 which was specially developed for Xoom to access Micro sdcard. If you use Rom Manager to boot into recovery, it may have tricked you into updating to a newer version of CWM recovery which only uses internal storage and isn't completely compatible.
thats whats happened :/ what a douch i am, i have v4.0.0.4, anyway i can downgrade? thanks
mingmong24 said:
thats whats happened :/ what a douch i am, i have v4.0.0.4, anyway i can downgrade? thanks
Click to expand...
Click to collapse
Just reflash the image file through fastboot or the zip file from your internal "sdcard" if possible. Remember not to flash a zip file through fastboot.

PLEASE HELP MY Fit is not switching ON on any Rom's ?

Don't know what happened when i installed new cyanogen 7.2 and clokword it to 844 keeong the set on boot checked the cell restart and has not come up . Tried with different Rom's but no luck also check with removing sim card and most of the resolution posted in the forum.
Please help me.
Regards
Omkar
omkar3409 said:
Don't know what happened when i installed new cyanogen 7.2 and clokword it to 844 keeong the set on boot checked the cell restart and has not come up . Tried with different Rom's but no luck also check with removing sim card and most of the resolution posted in the forum.
Please help me.
Regards
Omkar
Click to expand...
Click to collapse
u shouldn't have checked the set on boot option.....try flashing other rom.........
Flash a stock rom. Then try
Sent from my GT-S5670 using xda premium
Feras.Rehman said:
Flash a stock rom. Then try
Sent from my GT-S5670 using xda premium
Click to expand...
Click to collapse
Any suggestion for te stock ROM as i already tried with the DDKT one i had, would appreciate if you shared a url.
Thanks
omkar3409 said:
Any suggestion for te stock ROM as i already tried with the DDKT one i had, would appreciate if you shared a url.
Thanks
Click to expand...
Click to collapse
Guys tried to flash through this Rom http://forum.xda-developers.com/showthread.php?t=1583430
but after the phone reboots from download mode it starts installation and throws errors like E: not accessible something similar
Can anyone please help me.
So now my phone starts normally after booting till samsung logo it restarts and this continues any ideas please :'(
omkar3409 said:
Guys tried to flash through this Rom http://forum.xda-developers.com/showthread.php?t=1583430
but after the phone reboots from download mode it starts installation and throws errors like E: not accessible something similar
Can anyone please help me.
So now my phone starts normally after booting till samsung logo it restarts and this continues any ideas please :'(
Click to expand...
Click to collapse
have you flashed the stock rom? i think you have to flash it first and then if you want to use custom rom flash CWM again then flash the custom..
NO problem. It happens to me a lot of times. All you gotta do is flash a four package file like XXKPI (2.3.4). And then flash any custom rom of your choice. Simple as that. Cheers :laugh:
Just be carefully in the future, dont overclock ur fit at 844mhz. i think ~800 its fine.
initial_D. said:
have you flashed the stock rom? i think you have to flash it first and then if you want to use custom rom flash CWM again then flash the custom..
Click to expand...
Click to collapse
Yup flashed it still didnt worked anyways i got it fixed from Samsung care centre but when i try to re flash cwm it completes but i get same issue then i again tried installing stock rom and i had some errors similar to below
E : cant mount system
install cwm using odin and do not overclock ur phone to more than 801 Mhz or else it will crash randomly
omkar3409 said:
Yup flashed it still didnt worked anyways i got it fixed from Samsung care centre but when i try to re flash cwm it completes but i get same issue then i again tried installing stock rom and i had some errors similar to below
E : cant mount system
Click to expand...
Click to collapse
you have to format your sd card bro, format all (also sd ext if you have and merge partition)..but you have to back up before bro..
just format with your phone.
if it doesn't work, try to change your sd card..
based on my experience...
hahaha
initial_D. said:
you have to format your sd card bro, format all (also sd ext if you have and merge partition)..but you have to back up before bro..
just format with your phone.
if it doesn't work, try to change your sd card..
based on my experience...
hahaha
Click to expand...
Click to collapse
The thing i can currently tell you is im not trying for any custom rom right now, but will first check on with any other stock rom, as when i start flashing with stock Rom too it throws error for the E: cant mount.....etc and m damn fed up with that error. So one thing is sure ill try your given tips and vl reply asap. thanks anyways
Try to install a rom without a sim card in the phone...and after installing wipe the data and the cache...i was also having the same problem...
Agnibha said:
Try to install a rom without a sim card in the phone...and after installing wipe the data and the cache...i was also having the same problem...
Click to expand...
Click to collapse
Yup i had my sim in other mobile and was flashing my phone but its same.

[SOLVED] Hardware Brick flashing BootAnimation

Hello guys,
I´m using BlissPop with Metallized Kernel and after flash logo and move bootanimation and rbootanimation, my phone doesn´t boot. I can´t enter recovery or fasboot mode!!!! What can I do???, please help me.
I use bootanimation and logo from this post: http://forum.xda-developers.com/showthread.php?t=2768755&page=3#post60766600
Thanks in advance.
Hello again guys,
After read and use this gide http://forum.xda-developers.com/oneplus-one/general/guide-unbrick-oneplus-one-t3013732 I finish with CM 11 (4.4.4) with TWRP 2.8.6.0.
I want to install CM 12S or BlissPop, preferably BlissPop but I can´t install any zip from TWRP, the flashing process always fail. Can anyone give me some advice? Or point me to a certain toolkit? I´m totally confussed right now... :S
Thanks in advance guys!!!
You need to provide more information. Exactly what error message are you getting when the zip install fails?
XDA Moderator
Transmitted via Bacon
Heisenberg said:
You need to provide more information. Exactly what error message are you getting when the zip install fails?
XDA Moderator
Transmitted via Bacon
Click to expand...
Click to collapse
Hello and thanks for your answer.
The error message that I get is "E: Error executing updater binary in zip....." the next to this message is the path where I have the Zip for the rom in my SD card. I´m totally disoriented and I don´t know how to proceed, I appreciate any more help. Thanks in advance!!!
Istvan_86 said:
Hello and thanks for your answer.
The error message that I get is "E: Error executing updater binary in zip....." the next to this message is the path where I have the Zip for the rom in my SD card. I´m totally disoriented and I don´t know how to proceed, I appreciate any more help. Thanks in advance!!!
Click to expand...
Click to collapse
Ok. Are you checking the md5 after downloading the zip to ensure that it isn't corrupt? Are you wiping properly (system, data, cache, dalvik cache) before attempting the install? Since unbricking the phone have you flashed any firmware at all or is this your first attempt?
Heisenberg said:
Ok. Are you checking the md5 after downloading the zip to ensure that it isn't corrupt? Are you wiping properly (system, data, cache, dalvik cache) before attempting the install? Since unbricking the phone have you flashed any firmware at all or is this your first attempt?
Click to expand...
Click to collapse
Hi again,
md5 checked, full wipe done and after unbrick phone I just flash CM12 nightly.
Also note that I flash BlissPop and Metallized Kernel and everything was ok until I decide to change the bootanmation, rbootanimation and logo. I try to flash the ROM with the zip that I use the first time and also try with a new downloaded zip.
Thanks and regards.
Istvan_86 said:
Hi again,
md5 checked, full wipe done and after unbrick phone I just flash CM12 nightly.
Also note that I flash BlissPop and Metallized Kernel and everything was ok until I decide to change the bootanmation, rbootanimation and logo. I try to flash the ROM with the zip that I use the first time and also try with a new downloaded zip.
Thanks and regards.
Click to expand...
Click to collapse
Ok, that information probably would have been useful in your initial post. You're messing with things that can (and obviously do) cause major problems. Flash the stock images with fastboot, see section 8 of my guide here:
http://forum.xda-developers.com/showthread.php?t=2839471
After that you should be able to flash and boot a ROM again, just don't go screwing with the boot logo.
Heisenberg said:
Ok, that information probably would have been useful in your initial post. You're messing with things that can (and obviously do) cause major problems. Flash the stock images with fastboot, see section 8 of my guide here:
http://forum.xda-developers.com/showthread.php?t=2839471
After that you should be able to flash and boot a ROM again, just don't go screwing with the boot logo.
Click to expand...
Click to collapse
Really thanks again, I´ll check carefully your post and post the results here. Thanks.
P.S.: I never touch any bootlogo or logo again.
Hello again Heisenberg,
I follow all the steps of section 8 of your guide and I´m on CM OS 5.0.2 and an update of 598,4 MB is downloading right now, the name is Cyanogen OS YNG1TAS17L, can I install it and then flash again my BlissPop?
Really thanks for all your help.
P.S.: Are you watching Better Call Saul? xD
Hello again,
All works like a charm and I´m on BlissPop again.
Really really thanks Heisenberg, cheers.
Istvan_86 said:
Hello again,
All works like a charm and I´m on BlissPop again.
Really really thanks Heisenberg, cheers.
Click to expand...
Click to collapse
Excellent, glad to see you're up and running again.

XT1039 bootloop after flashing CM13

Hi,
XT1039: bootloader unlocked, rooted, stock rom 4.4.4
TO: nightly
Flashed 4118 bootloader, as detailed in http://forum.xda-developers.com/moto...tions-t2996087
It was successful.
Followed https://wiki.cyanogenmod.org/w/Install_CM_for_peregrine
unlocked bootloader
installed cm-recovery from here: https://download.cyanogenmod.org/?type=nightly&device=peregrine
tried to flash cm, got a bootloader error,
followed this guide: http://forum.xda-developers.com/showpost.php?p=59520890&postcount=233
Now using bootloader 411A
flashed cm-13.0-20160121-NIGHTLY-peregrine.zip
from here: https://download.cyanogenmod.org/?type=nightly&device=peregrine
now the phone is stuck at the boot screen.
So I flashed twrp recovery, successful and reflashed cm-13.0-20160121-NIGHTLY-peregrine.zip
I tried several different guides that included all sorts of cache deletion and format orders but the result is still the same
(I am not using an sdcard but only the internal storage.)
After rebooting, the phone is stuck on the Cyanogenmod boot icon (blinking cat face) since past half hour.
Please guide how to debug/recover.
fastboot and recovery are working
Thanks,
[edit:]
The cm-13.0-20160121-NIGHTLY-peregrine.zip was transferred by mounting the internal storage on the PC and copying it manually. Just in case this matters
Hi,
Try to flash stock rom from here : http://forum.xda-developers.com/moto-g/4g-development/rom-stock-motorola-4g-lollipop-rom-t3142816
satanas17 said:
Hi,
Try to flash stock rom from here : http://forum.xda-developers.com/moto-g/4g-development/rom-stock-motorola-4g-lollipop-rom-t3142816
Click to expand...
Click to collapse
Thanks for the reply, but the goal is to get cyanogenmod on my phone. How does the stock rom help me with that??
Just for testing, I have installed the stock rom to see if it works and it does. I now have a Motorola Android 5.1 on my phone. But thats not what I wanted.
Anyone having any idea how to make cyanogenmod work?
karstenme said:
Thanks for the reply, but the goal is to get cyanogenmod on my phone. How does the stock rom help me with that??
Click to expand...
Click to collapse
Just to restoring a kernel on it...after restoring one, go to TWRP, make your wipes and flash again your CM
satanas17 said:
Just to restoring a kernel on it...after restoring one, go to TWRP, make your wipes and flash again your CM
Click to expand...
Click to collapse
WOW Thank you very much, its working
Maybe you can also explain to my why installing the custom rom mattered, since I wiped everything before installing cm again, I would assume there is nothing of the stock rom left on the device.
karstenme said:
WOW Thank you very much, its working
Click to expand...
Click to collapse
U're welcome
karstenme said:
Maybe you can also explain to my why installing the custom rom mattered, since I wiped everything before installing cm again, I would assume there is nothing of the stock rom left on the device.
Click to expand...
Click to collapse
Not really able to explain...sometimes sh*t happens...
But this procedure works almost every time.
Surely due to your bootloader error after your first flash with CM recovery...something was broken...
Most important, now, it's working...Enjoy
I install cm but google play is not working and sallular data also not working.. Plz any one help me please..

Help!My OPO cannot flash ROM with recovery.

The Screenshot is below. I got stuck in the H2OS 2.0 so I flash the cos12 to save it from bricking. Then I flash the TWRP. When I wanted to flash a CM13,the problem in the screenshot occurred. Need some Help here.
Help,PLZ
I don't have another phone.I gotta fix this as soon as possible in case I don't miss any important phone calls. plz. Somebody gives me a hand.
The problem is that you're not installing the TWRP flashable rom.
See that the zip file of the CM13 build you tried to install is called cm13......bacon-signed-fastboot......zip. So you're trying to install a fastboot rom with a custom recovery, instead of trying to install a custom rom for a custom recovery. That's why TWRP doesn't found any meta-inf folder.
When downloading the rom in the official web be sure to download the one compatible with custom recoveries.
mustang_ssc said:
The problem is that you're not installing the TWRP flashable rom.
See that the zip file of the CM13 build you tried to install is called cm13......bacon-signed-fastboot......zip. So you're trying to install a fastboot rom with a custom recovery, instead of trying to install a custom rom for a custom recovery. That's why TWRP doesn't found any meta-inf folder.
When downloading the rom in the official web be sure to download the one compatible with custom recoveries.
Click to expand...
Click to collapse
Okay,Thanks. But when I tried another ROM (NucleaRom-V2.1.4-BETA[7.0]-bacon-20161011-0245.zip) ,I failed again. It occurred error 7. The TWRP is universal in many ROMs,right?I used to installed many with it successfully.However, I failed again and again this time.
SimonYJB said:
Okay,Thanks. But when I tried another ROM (NucleaRom-V2.1.4-BETA[7.0]-bacon-20161011-0245.zip) ,I failed again. It occurred error 7. The TWRP is universal in many ROMs,right?I used to installed many with it successfully.However, I failed again and again this time.
Click to expand...
Click to collapse
The 7 error use to happen when you get a bad download and there is missing data. You can compare the md5 of the rom to check if there are missing data or simply download it again, or try another rom.
Also i suggest you to use the latest TugaPower TWRP.
mustang_ssc said:
The 7 error use to happen when you get a bad download and there is missing data. You can compare the md5 of the rom to check if there are missing data or simply download it again, or try another rom.
Also i suggest you to use the latest TugaPower TWRP.
Click to expand...
Click to collapse
Actually,I'm using the latest TeamWin - TWRP. Here is the screenshot. I downloaded the cm13 official but it didn't work too. Could you give a guide to get a Tugapower TWRP? Maybe it will work with the TugaPower TWRP.
SimonYJB said:
Actually,I'm using the latest TeamWin - TWRP. Here is the screenshot. I downloaded the cm13 official but it didn't work too. Could you give a guide to get a Tugapower TWRP? Maybe it will work with the TugaPower TWRP.
Click to expand...
Click to collapse
Did you do wipes (system, data, cache and dalvik cache) before flashing the roms?
mustang_ssc said:
Did you do wipes (system, data, cache and dalvik cache) before flashing the roms?
Click to expand...
Click to collapse
yea,of course. This problem began at my last ROM(H2OS V2.0.1). Is it the main reason? Before that ROM ,everything goes well.
SimonYJB said:
yea,of course. This problem began at my last ROM(H2OS V2.0.1). Is it the main reason? Before that ROM ,everything goes well.
Click to expand...
Click to collapse
Well, honestly i don't know.
I would suggest you to check if the files you have downloaded are not corrupted in case the computer where you're downloading the roms is corrupt them, i experienced that case. So you can check md5 following this guide: http://forums.androidcentral.com/optimus-v-rooting-roms-hacks/113984-what-md5-how-use-verify-your-download.html
And the TWRP i suggested you is here: http://forum.xda-developers.com/oneplus-one/development/unofficial-twrp-3-0-x-tugapower-t3398366. You can install it though fastboot or try with the current recovery you have.
mustang_ssc said:
Well, honestly i don't know.
I would suggest you to check if the files you have downloaded are not corrupted in case the computer where you're downloading the roms is corrupt them, i experienced that case. So you can check md5 following this guide: http://forums.androidcentral.com/optimus-v-rooting-roms-hacks/113984-what-md5-how-use-verify-your-download.html
And the TWRP i suggested you is here: http://forum.xda-developers.com/oneplus-one/development/unofficial-twrp-3-0-x-tugapower-t3398366. You can install it though fastboot or try with the current recovery you have.
Click to expand...
Click to collapse
Thank you very much. I really appreciate it. I'll try as you say.Hope the issues can be solved.:good:

Categories

Resources