Related
This question has been asked before but no one can answer it odd.
Nexus 7 charger is two amps. Stock s3 charger is one amp.
Can I charge my s3 without damaging it using the other charger. People say it charges faster. Some people say it doesn't matter because the kernel will limit it.
Whats the real deal?
Sent from my SCH-I535 using Tapatalk 2
I am pretty sure it will use only what it needs. Atleast thats what i been taught at radioshack
Sent from my SCH-I535 using xda premium
There are a lot of variables as to what the maximum charge current will be. I've never seen it go over .8 amp. So if you use a 1 amp, or a 20 amp charger, it will be .8 amp. MAX. Usually less.
Use whatever you have handy that is 5 volts.
I actually use an old 5 volt .6 amp charger for overnight charging. A bit slow, but I don't care.
I have a home grown charger on my motorcycle that can go well over 1 amp, but the phone only has ever gone to about .8 amp. For a long time I had that charger set to 5.5 volts, and the current was up a bit closer to 1 amp. But the heat worried me and I bumped it back down to 5 volts.
Have been charging my s3 on the new iPad charger, and 2amp chargers bought from amazon without any issues.
Sent from a SYNERGIZED GalaxySIII
I'm using a RCA dual usb charger one usb plug is 1 amp and the other is 2.1amp both charge fine but I don't notice the 2.1amp charging any faster. I so kinda point less to use in my eyes
Sent from my SCH-I535 using Tapatalk 2
epagib said:
Have been charging my s3 on the new iPad charger, and 2amp chargers bought from amazon without any issues.
Sent from a SYNERGIZED GalaxySIII
Click to expand...
Click to collapse
You realize you're using a 10v charger on a 5v device right? That can toast your battery over time, a short time too depending on if you leave it plugged into it over night, etc..
Hi All,
Is anyone having issues with their non-nexus 4 chargers charging on and off? When I plug my phone into my car usb charger (5V/1A), the charging icon flashes on and off; I didn't want to ruin the phone so I unplugged it. I googled it and saw this thead; someone mentioned that the N4 required a 2A charger so I wanted to see the experience here.
Link: http://productforums.google.com/forum/#!topic/mobile/xQhUljmWY5E
The charger I'm using: http://www.amazon.com/Belkin-Micro-Auto-Charger-5VOLT/dp/B002F0200Q
Stock charger is 1200 ma.
My HTC car charger gives 1000 ma and works fine for my nexus 4.
Sent from my Nexus 4 using Tapatalk 2
I haven't had an issue with the charging going on and off, but I have been having an issue when I'm charging and using the phone with a non-LG charger. If I use the one that came with the phone, all is well... But if I use any other charger like my old one from HTC, the phone heats up real bad and I get horrible thermal throttling. I've tested it a few times, always doing the same thing (looking at XDA) and the LG charger is the only one that plays well with the phone while charging/using.
Sent from my Nexus 4 using xda premium
I just checked with another USB wall charger that I had which puts out only 500mA; that one works fine... so I guess my car charger is broken.
I've been using the charger that came with my nexus one and had no problems. The last couple days I've been charging off my PC because apparently slow charging is better for the battery.
I need an extra USB cable for charging my N4 in my car because I use a Scosche dual USB charger 2.1 amp. Will any USB cable be fine like the one in the link below or should I be looking for anything specific? I don't want something to mess up my N4 battery.
http://www.amazon.com/gp/aw/d/B00AHEQ6FC/ref=aw_cr_item_title?qid=1360505932&sr=8-19
Is there anywhere that sells the original LG travel charger?
Sent from my Nexus 4 using xda app-developers app
I was wondering the same thing. I'd like to get a couple extra USB wall chargers and micro USB cables to go with them. I'd like it to be as efficient and safe as possible for my Nexus 4 as well as friends that may need a charger. (N4 taking priority here)
Sent from my Nexus 4 using xda app-developers app
Well as long as the power supplied is 5V (the usb standard) and under 1.2 amp (the output of the factory wall adaptor) you should be safe not burning out your phone. If you are just asking about a usb to micro usb cable then it shouldn't matter since the cable should supply the right voltage anyways.
Sent from my Nexus 4 using xda app-developers app
Panzer500 said:
Well as long as the power supplied is 5V (the usb standard) and under 1.2 amp (the output of the factory wall adaptor) you should be safe not burning out your phone. If you are just asking about a usb to micro usb cable then it shouldn't matter since the cable should supply the right voltage anyways.
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
The phone will only take the amps that it needs. I would get a 2A+ charger to be on the safe side.
dinosaur1 said:
I need an extra USB cable for charging my N4 in my car because I use a Scosche dual USB charger 2.1 amp. Will any USB cable be fine like the one in the link below or should I be looking for anything specific? I don't want something to mess up my N4 battery.
http://www.amazon.com/gp/aw/d/B00AHEQ6FC/ref=aw_cr_item_title?qid=1360505932&sr=8-19
Is there anywhere that sells the original LG travel charger?
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
Call me crazy/oc/weird but I bought this: http://www.buychina.com/items/lg-f1...p880-original-line-charge-charger-qrwrvpsqjhm
I'm perfectly aware I can use other chargers and cables but I like to have an oem extra if I need it. 10usd and 2 weeks wait isn't so bad
Sent from my Nexus 4 using Tapatalk 2
I use this with my nexus 4
http://www.amazon.com/PowerGen-Dual...71&sr=8-1&keywords=powergen+dual+port+charger
Actually used it for my Nexus 7 and when I got my Nexus 4 I always used it for that. Never even bothered opening up my stock charger or cable. Dual port is nice if you want to charge 2 devices at 1 amp each without having a bunch of chargers plugged in.
thephantom said:
Call me crazy/oc/weird but I bought this: http://www.buychina.com/items/lg-f1...p880-original-line-charge-charger-qrwrvpsqjhm
I'm perfectly aware I can use other chargers and cables but I like to have an oem extra if I need it. 10usd and 2 weeks wait isn't so bad
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
Woah! Thanks man! I've been looking everywhere for this! Haha
I love the OEM USB Cable, especially cause it fits with all of my cases.
I would love to get the OEM charger, but after my current one acting up (usb wire for some reason keeps making it say usb charging despite being plugged into wall outlet), I'm cautious.
facetubespam said:
I would love to get the OEM charger, but after my current one acting up (usb wire for some reason keeps making it say usb charging despite being plugged into wall outlet), I'm cautious.
Click to expand...
Click to collapse
This is one of the reasons I bought the oem charger. Had the ac/usb issue. Changed wires and still does that. Used my gnex charger and it didn't give me problems. So I said it must be the charger itself. Bought the new one and now I'm confident when plugging my phone in. No more issues on the ac/usb charging thing
Sent from my Nexus 4 using Tapatalk 2
thephantom said:
This is one of the reasons I bought the oem charger. Had the ac/usb issue. Changed wires and still does that. Used my gnex charger and it didn't give me problems. So I said it must be the charger itself. Bought the new one and now I'm confident when plugging my phone in. No more issues on the ac/usb charging thing
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
Hmm... for me, I changed the wires and it works. I think I would rather just save the $10 and put it towards the "wheneveritisreleased" Wireless Charging Orb.....or the TYLT VU when it comes out in April.
Hi guys, I have a few micro USB chargers lying around. Just wondering if using these would harm my N4:
12 V, 500mA
5 V, 2.1 A
5 V, 1.9 A
5 V, 1 A
The 12 V 500mA charger makes my phone's screen go haywire (applications opening and closing by themselves) but it does charge the phone.
facetubespam said:
Hmm... for me, I changed the wires and it works. I think I would rather just save the $10 and put it towards the "wheneveritisreleased" Wireless Charging Orb.....or the TYLT VU when it comes out in April.
Click to expand...
Click to collapse
at least you narrowed it down fast to the wire. in my case after swapping just the wires it was still the same. then when i used the original n4 charger on my gnex, my gnex suddenly had the ac/usb charging issue. my problem with not getting another charger was i sometimes charge both phones at the same time so i needed one more. good thing a couple of searches led me to the buychina site and now all works well.
I am very interested in this topic as I believe I'm going to need a new USB > MicroUSB cable. My cat accidentally knocked off my N4 while it was charging using the original cable/charger. While it seems the charger itself is okay, the cable is what I am worried about. The end seems slightly bent and, while it will plug into the N4 (which will report charging) it doesn't go as "easily". From visual inspection I think the problem is with the cable's microUSB end; I really hope that the N4's socket itself is not bent/damaged in anyway, but I cannot see any visual signs thereof.
I was really hoping to pick up another OEM charging kit, but it appears that (assuming they are legit ) that one can only find them on Taobao/ChinaBuy as linked above? I was hoping Amazon would have them. With this in mind, will there be anything specific to look for finding another "USB to MicroUSB cable" from Amazon to use with the existing, undamaged OEM charger? Thanks.
I'm no expert but I believe there shouldn't be any issue of you get a different cable. I've used an HTC, Samsung and Asus calls with the LG charger and there aren't any issues. If it's just the cable you need, go with Amazon. It'll be faster
Sent from my Nexus 4 using Tapatalk 2
thephantom said:
I'm no expert but I believe there shouldn't be any issue of you get a different cable. I've used an HTC, Samsung and Asus calls with the LG charger and there aren't any issues. If it's just the cable you need, go with Amazon. It'll be faster
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
Great, thanks. It seems logical that all "USB A > MicroUSB B" cables should be capable of the same thing, but I just wanted to be sure I wasn't missing something that would say, impair my ability to use this cable for not only charging with the OEM wall charger, but charging from my PC's USB ports, connecting to said PC via USB Debugging for rooting/flashing etc...
thephantom said:
Call me crazy/oc/weird but I bought this: http://www.buychina.com/items/lg-f1...p880-original-line-charge-charger-qrwrvpsqjhm
I'm perfectly aware I can use other chargers and cables but I like to have an oem extra if I need it. 10usd and 2 weeks wait isn't so bad
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
Thanks! How did you find this site?
Sent from my Nexus 4 using xda app-developers app
dinosaur1 said:
Thanks! How did you find this site?
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
Oh just by looking at different cases and then someone from xda mentioned that site. Did some searching and I saw it had the chargers too. Couldn't find it on eBay or Amazon before. Haven't checked lately though
Flowed and Tapped from my Nexus
I am currently using a Trent car charger with a LG OEM micro usb cable, charging at 5V at 1A. http://www.amazon.com/dp/B009HD44US/ref=pe_175190_21431760_M3T1_ST1_dp_1
For travel and and backup, I use a genuine LG Travel Charger with a LG OEM micro USB Cable, which also charges at 5V at 1A. http://www.theaccessoryking.com/lg-accessories/travel-chargers/ssad0033801/travel-charger-wusb-charging-cable-micro-usb-platform.html
innumerabilis said:
Hi guys, I have a few micro USB chargers lying around. Just wondering if using these would harm my N4:
12 V, 500mA
5 V, 2.1 A
5 V, 1.9 A
5 V, 1 A
The 12 V 500mA charger makes my phone's screen go haywire (applications opening and closing by themselves) but it does charge the phone.
Click to expand...
Click to collapse
DUDE!!!! The 12V charger can KILL your phone.. The phone is designed for 5volts..
As long as the charger supplies 5 volts it is okay... even a 10 amp charger will work fine (if availiable ).. The current is controlled by the device (nexus 4 in this case).. It will draw how much current it requires.. Voltage on the other hand is decided by the charger.... 12volts will fry the device...
Techguy18 said:
DUDE!!!! The 12V charger can KILL your phone.. The phone is designed for 5volts..
As long as the charger supplies 5 volts it is okay... even a 10 amp charger will work fine (if availiable ).. The current is controlled by the device (nexus 4 in this case).. It will draw how much current it requires.. Voltage on the other hand is decided by the charger.... 12volts will fry the device...
Click to expand...
Click to collapse
Oops, thanks for this heads up! I've used the 12V charger for weeks without any noticeable damage (though the screen goes haywire when it is plugged in). I'll switch to the original N4 charger now.
I have a Charger adapter that I got with my GalaxyS years ago. It is the type that you just plug in your standard USB cable into it then plug into a cigarette lighter in your car. My question is does the S4 have the same voltage and amp requirements as older Galaxys so I can use this adapter now for my S4?
Thanks
RonH54 said:
I have a Charger adapter that I got with my GalaxyS years ago. It is the type that you just plug in your standard USB cable into it then plug into a cigarette lighter in your car. My question is does the S4 have the same voltage and amp requirements as older Galaxys so I can use this adapter now for my S4?
Thanks
Click to expand...
Click to collapse
It seems from what I have read after Goggling that is "might" work but most people seem to recommend a 2amp model that has the cord built in not the plug in USB type.
U can use 2.6amp or lower. Older chargers are probably 1amp or lower so that's fine. But it'll charge slow compared to a 2amp ones which is what I use. U can buy a pny brand car cigarette usb adapter 2amp output for $7 on amazon and oem usb cable for $3.
Sent from my SGH-M919 using Tapatalk 4 Beta
I was using older chargers with my S4 also but it was taking way too long. I got a 2amp one for home and one for the car and now it charges properly.
you might find that the gps will eat the batter faster than it can charge using an old 1amp charger, recomended to get a 2A one for sure
Would I be risking any damage by using my Motorola car charger?
It will be fine I used to use my BlackBerry charger for mine
U can use Motorola or blackberry chargers. Motorola actually makes good chargers.
Sent from my SGH-M919 using Tapatalk 4 Beta
Thanks for all the info guys.
Will this charger be safe?
http://www.amazon.com/Motorola-Vehi...568947&sr=8-15&keywords=motorola+wall+charger
I've read that chargers can damage the phone, but it seems to be debateable. I also have a motorola wall charger that has an output listed as 5V=850mA
Is that one safe to use as well? I've used these two charges with my old phones, but I want to make sure its safe to use with the S4.
I bought these
http://www.amazon.com/dp/B0085ZK098/ref=pe_385040_30332190_pe_175190_21431760_3p_M3T1_ST1_dp_1
2.1 amp cigarette adapter
http://www.amazon.com/dp/B007QRX54S/ref=pe_385040_30332190_pe_175190_21431760_3p_M3T1_ST1_dp_1
Spend the extra few dollars and get a faster charger.
Sent from my SGH-M919 using Tapatalk 4 Beta
Hey Guys well i think that 12 AMP professional balance charger is the best and avalible on low price.Its best for that solutin.Thanks!!
Yet another review for a charger. I was provided this charger at a heavy discount (not free) for an unbiased review.
UPDATE: Use code 6SLDGOIQ to get $6 off the charger from amazon, below. I don't know how many times this code will work, but it was provided by the Choetech rep that provided the charger to me. Comment here whether or not the code works for you please.
Get it here: http://www.amazon.com/gp/product/B0...etech usb c&qid=1452477270&ref_=sr_1_4&sr=8-4
Pros:
- rapidly charges Nexus 6P without issue (peak current of 2920mA according to Ampere) while using Choetech USB C cable
- packaging is mostly recyclable (except the polymer pouch)
- supports QC 2.0 tech (which I couldn't test because I don't have any devices to utilize this function)
Cons:
- charger heats up to 141*F whole charging the 6p, whole the Google brick only heats up to 94*F under the same conditions
Other thoughts:
- size is SLIGHTLY larger than the included Nexus 6P charging brick (see pics)
Would I buy it again: absolutely
Like the review? Click the button. Questions, comments, concerns? Post em here!
Check OP for $6 off code. I can't verify if it works, but it was provided by the Choetech rep. If it doesn't work, let me know and I'll remove it. Hope you guys can take advantage of it. Good charger [emoji106]
Sent from my Nexus 6P using Tapatalk
How hot does it get when charging? I just got mine and have noticed it gets really hot when charging. Much hotter than the OEM charger. Also, with the 2m c to c cable they make I have only seen a max of about 1850ma when the OEM charger was pulling 2950ma when I switched to it to see. Is it possible I got a bad unit?
Sent from my Nexus 6P
dgwood12 said:
How hot does it get when charging? I just got mine and have noticed it gets really hot when charging. Much hotter than the OEM charger. Also, with the 2m c to c cable they make I have only seen a max of about 1850ma when the OEM charger was pulling 2950ma when I switched to it to see. Is it possible I got a bad unit?
Sent from my Nexus 6P
Click to expand...
Click to collapse
I definitely had closer to 3A charge rate with their 2m cable. I never noticed if it overheats or not. I'll charge my phone later tonight for half an hour and see if it heats up and report back
Sent from my Nexus 6P using Tapatalk
rice923 said:
I definitely had closer to 3A charge rate with their included cable. I never noticed if it overheats or not. I'll charge my phone later tonight for half an hour and see if it heats up and report back
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
OK. I'm thinking maybe something is up with the one I got? I have their 2 meter cable and got no where near 3A. Did yours come with a cable? Mine had only a charger in the box. Thanks!
Sent from my Nexus 6P
dgwood12 said:
OK. I'm thinking maybe something is up with the one I got? I have their 2 meter cable and got no where near 3A. Did yours come with a cable? Mine had only a charger in the box. Thanks!
Sent from my Nexus 6P
Click to expand...
Click to collapse
Charger and cable were separate items. I also use the 2m cable
Edit: charged the phone with Choetech charger and Choetech 2m cable from 6% up to 33%. Charging brick had a temperature of 141*F according to a handheld IR thermometer.
Edit 2: Charging with Google brick and Choetech 2m cable from 33%to 67%. Charging brick had a temperature of 94*F according to a handheld IR thermometer.
Sent from my Nexus 6P using Tapatalk
OP edited to reflect heating comparison.
My 6p was able to charge at the proper 3A current using the Choetech charger.
Sent from my Nexus 6P using Tapatalk
rice923 said:
Charger and cable were separate items. I also use the 2m cable
Edit: charged the phone with Choetech charger and Choetech 2m cable from 6% up to 33%. Charging brick had a temperature of 141*F according to a handheld IR thermometer.
Edit 2: Charging with Google brick and Choetech 2m cable from 33%to 67%. Charging brick had a temperature of 94*F according to a handheld IR thermometer.
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
That is quite a bit hotter than the OEM charger. Thanks for checking this!
Sent from my Nexus 6P
dgwood12 said:
That is quite a bit hotter than the OEM charger. Thanks for checking this!
Sent from my Nexus 6P
Click to expand...
Click to collapse
Indeed it's a significant difference in temperature. I didn't put it under cons since the temperature wasn't scathingly hot, but worth noting. However, I've decided that the Choetech will be my back up charger, and the Google brick will remain the one used more often.
And thank you for actually bringing this to my attention. Appreciate it
Sent from my Nexus 6P using Tapatalk
I also received this charger along with both types of cables.
They work great! No temp issues at all, and this charger doesn't slow my phone to a crawl while charging like the OEM one does.
Honestly this is a great deal and a much nicer price point then the stock charger, and I prefer using it. Nice to see that inexpensive doesn't always mean cheap.
The actual female Type C plug feels cheap. You can hear something flexing when inserting it. It works though, will be a spare travel charger.
I reached out to the rep about the heating issue. I was basically told it's nothing more than a defective unit, as I was told that there is built in overheat protection.
Will update OP again when new unit arrives, again with temperature readings.
Sent from my Nexus 6P using Tapatalk
Kinda worries me it lists Qualcomm QC 2.0 on the charger itself since we know the phones don't support it.
MoNsTeReNeRgY22 said:
Kinda worries me it lists Qualcomm QC 2.0 on the charger itself since we know the phones don't support it.
Click to expand...
Click to collapse
That's also been on the back of my mind. But my rational for still using it is that the phone is the one that requests a charge from the brick, instead of the brick sending whatever charge it wants. My background for how these chargers work is extremely rudimentary compared to what's floating around in the USB C thread, but I'd think any device that inappropriately received 9v (QC 2.0) would have fried by now.
Sent from my Nexus 6P using Tapatalk
I got this charger to test and it performs identically to the stock charger for me. I got it with some CHOETECH cables as well and the performance was on par with what I got from stock cable and charger. I got a 6 foot type c cable so I could get a little more reach and while I was successful on that front, the cable matters 6 foot cable in question did charge slower than shorter cables. This has been my experience with most 6 foot and longer cables, not just with type c but usb in general. I usually charge over night so it's not much of a hassle. On the days I may need a quicker top up however, I just use the CHOETECH charger and cable or stock charger and cable, whichever I'm closest to!
Choetech USB C review
Let me preface this review with the statement that the adapter and usb c cable were given to me for free for the purposes of the review. That being said, I’m not going to say this thing is great, if it isn’t and waste your money.
Now. On to the review
Choetech sent me a usb type c cable, and a fast charge adapter. The adapter model number is TC0001. I don’t recall the model number of the cable itself, and I left the packaging at home (I’m a truck driver). But it’s a standard 6 ft usb c to usb c cable. If you want to see a visual of it, you can watch the initial review video I did here
https://goo.gl/photos/PoHcFtpvmTKZbNsi7
The short version of this review is that it works exactly as advertised. I didn’t get a chance to try it with an auxiliary input cord, since I didn’t have a chance to hit a Walmart or best buy. But, I’ve tried both in every other combination.
Cord with stock charger, cord with choetech charger, choetech charger with stock cord. All of this was on a Nexus 5x (my only usb c device), and they all worked almost identically. The combo of the choetech cord and charger took about 15 minutes longer to charge from 4% than the stock setup from 4%. But, I was also driving, and listening to a podcast, whereas I was still and sleeping on the stock setup. So, I’m pretty sure in a apples to apples setup they would’ve been perfectly matched
Fit and finish
I am HARD on electronics. There’s no way around it. Between crap falling off my bunk, or table because I forget to secure it, or just the vibrations of the truck, or whatever. My stuff gets beat up. I can’t give you a longterm review on this thing. But, after 3 weeks of usage, every day, I’ll say that the charger looks exactly the same as when it came out of the box. The cable doesn’t show any frays or nicks or crimps, and the whole assembly still works just as well as before. I’ll say that the connection for the port seems to be a touch looser. But, that’s not to say it’s loose at all. More like the newness has worn off so that it’s not so tight. I still get that satisfying ‘click’, and I can still dangle my phone by the cord, if I really want to. No. I don’t recommend that test.
The phone itself is just fine, while charging. No overheating, no performance lag (outside of the normal stuff you get with the 5x… please google, fix it?). it shows the ‘charging rapidly’ message on the lockscreen, if you need that to get your warm and fuzzy, as well.
All in all, thus far, I’ve not used my stock charger in 2 weeks. And, if you gave me a blind test based solely on charging performance, I’m not sure I could tell you the difference.
A note of caution. I don’t have a usb c – usb a adapter, so I haven’t had a chance to use this thing in a data transfer or adb/fastboot command situation. Since you should always be using the stock cord for the latter, anyway, I’m not too worried about that. But I did want to let you know about the unknowns regarding transferring files.
My only concern (and this is why I wanted to test the insulation with an aux input cord) is the fact that you can feel the wires under the external sheathing. It’s not ridiculously obvious, and it doesn’t make me worry anything is going to get exposed just by rubbing the cord across a corner. But you can feel it, which means that people who charge and listen to music in their car might have issues. I simply don’t know.
That’s it. Hope this helps anyone looking.
Choetech
After doing a few weeks of testing with the latest Choetech Type-C to C *9.9ft(3M) cable and the Type-C 2.0 rapid travel charger, I think it's time I say a few words about them.
From my first impressions I was like wow this cable is super long. *Which could be a good or bad thing. I've been using stock cables for all my devices for a long time, and they have all been 3 to 4ft long. Which in today's world not long enough and not really logical if you need to have it behind a desk or while using it.
But anyways the cable is very nice and it actually snaps into my Nexus 6p. You can literally hang your *device from the cable without it falling to the ground. I tested the cable with CheckR app and it is approved and never had a issue charging my precious Nexus.
*Now for the charger not much I can say about it except that it just works. Charges my device from 5% to 100 in just over a hour. My Nexus says its charging rapidly on the lock screen. I have noticed sometimes when the charger is working really hard it makes a slight buzzing sound. But once the device gets to a certain percentage it stops. Now this isn't all the time just every so often. But it never effected charging. I highly recommend you all purchase these two products. You won't be dissatisfied.
Links:
CHOETECH Hi-speed USB-C to USB-C Cable 10ft(3m) for USB Type-C https://www.amazon.com/dp/B017W2RWAO/ref=cm_sw_r_other_awd_5qXNwb614QDTE
USB Type C Charger, CHOE 5V/3A 15W Rapid Wall Charger with the Latest Charging Tech *https://www.amazon.com/dp/B017I7EX46/ref=cm_sw_r_other_awd_CNXNwbRDTYX41
Sent from my Nexus 6P using Tapatalk
RANDYRKELLY said:
But anyways the cable is very nice and it actually snaps into my Nexus 6p. You can literally hang your *device from the cable without it falling to the ground. I tested the cable with CheckR app and it is approved and never had a issue charging my precious Nexus.
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
How did you use CheckR with a USB C cable? Far as I know, CheckR is strictly to test if a USB A-C cable has the correct resistors in place.
Sent from my Nexus 6P using Tapatalk
rice923 said:
How did you use CheckR with a USB C cable? Far as I know, CheckR is strictly to test if a USB A-C cable has the correct resistors in place.
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
By plugging it up to a USB type c PC port
Sent from my Nexus 6P using Tapatalk
RANDYRKELLY said:
By plugging it up to a USB type c PC port
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
When you open the CheckR app, there is an "i" symbol next to the donation symbols at the top. Clicking on that reveals a pop up that states the app is strictly for use with USB A-C cables. I'm aware you can still plug the cable into a USB C pc port, but my point is that it's a redundant test since the app isn't made for a USB C-C cable
Sent from my Nexus 6P using Tapatalk