omni 4.4.2 and other roms - Xoom Q&A, Help & Troubleshooting

I'm running omni ROM, big part, 4.4.2 on my Xoom but wanted to try out other Roms. Each time I wipe and install eos, for example, all goes well but the reboot just sits at the moto logo. Any ideas why eos isn't installing properly?

You need to reapply BigPart if you flash a BigPart Rom and flash the normal TWRP if you want to flash NonBigPart Rom. Read more HERE

I reapplied TWRP bigPart - if that's what you meant - still no luck....what am I doing wrong?

terrapin69 said:
I'm running omni ROM, big part, 4.4.2 on my Xoom but wanted to try out other Roms. Each time I wipe and install eos, for example, all goes well but the reboot just sits at the moto logo. Any ideas why eos isn't installing properly?
Click to expand...
Click to collapse
EOS isn't a BigPart ROM. You need to flash either the BigPart boot file or the ElementalX BigPart kernel...or go back through the BigPart process but flash regular TWRP in the first step instead of the BigPart version.
Sent from my HTC6435LVW using xda app-developers app

Actually, there is an eos big part rom as well as a big part eos boot image
Sent from my XT1053 using Tapatalk

I flashed big part twrp and it's all good... But the rom wasn't as I imagined so I'm back to omni... Don't imagine there's much being developed for the xoom too often
Sent from my XT1053 using Tapatalk

thx
The for this topic really informative

Related

Boot loop after flashing any custom ROM

All of a sudden yesterday my phone started boot looping while I was running Invisiblek's CM10. I finally got that sorted out, and used ODIN to get me to the rooted version of the stock ROM. However, now when I flash custom ROMs, I get a boot loop and have to restore back to the rooted version of stock. I've tried Invisiblek's CM10 again, Bean's... oh, and my CWM background is missing and is just black. I've also noticed(not sure if this could be why) that when I go to the mount section under CWM, both system and data keep defaulting to unmounted. Any suggestions?
Have you been using ezrecovery to flash recoveries before flashing ROMs??
Sent from my SCH-I535 using Tapatalk 2
hopesrequiem said:
Have you been using ezrecovery to flash recoveries before flashing ROMs??
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
Hm, no. The installation instructions never made any mention of ezrecovery. Is that my problem?
Flashed CWM through ezrecovery. CWM is working again it appears. Thank you very much!!
Krog216 said:
Hm, no. The installation instructions never made any mention of ezrecovery. Is that my problem?
Click to expand...
Click to collapse
What recovery are you using?
Sent from my Synergy GS3

[Q] Help flashing custom kernels, never had one successful flash...

No matter what ROM I'm on, or the compatible custom kernel I try to flash with whatever ROM I'm using at that time, I am still yet to have a successful flash of a kernel without rebooting the device only to have to pull my battery because it boots the first screen and then goes black and flashes the red LED, forcing me to restore to a backup I made prior.
I am running the most updated version of Liquidsmooth, and the most updated versions of CWM/TWRP. Any suggestions or possible causes? I always wipe cache/dalvik and fix permissions like I previously read was required in other threads.Thanks in advance!
StayingSober said:
No matter what ROM I'm on, or the compatible custom kernel I try to flash with whatever ROM I'm using at that time, I am still yet to have a successful flash of a kernel without rebooting the device only to have to pull my battery because it boots the first screen and then goes black and flashes the red LED, forcing me to restore to a backup I made prior.
I am running the most updated version of Liquidsmooth, and the most updated versions of CWM/TWRP. Any suggestions or possible causes? I always wipe cache/dalvik and fix permissions like I previously read was required in other threads.Thanks in advance!
Click to expand...
Click to collapse
What kernels did you flashed? And with what ROM?
If you are on liquid 2.2 I believe it need a aosp 3.4 kernel. I know the latest BMS kernel works. But the latest KT747 will not work unless you are using a new nightly of liquid 2.3. Be sure to wipe cache and dalvik cache after flashing but before rebooting.
Sent from my SCH-I535 using xda app-developers app
jmxc23 said:
What kernels did you flashed? And with what ROM?
Click to expand...
Click to collapse
Basically tried flashing any compatible kernel with the ROM I was running at the time. For example yesterday I tried flashing the KT747 kernel for Jellybean with the current ROM I'm running, which is the most recent Liquidsmooth 4.2.2 ROM. Still no success
Here is the latest liquid...
Nightly Builds 04/29/13 for d2att, d2spr, d2tmo, and d2vzw available on GooInsideMe
http://goo.im/devs/liquidsmooth/nightly/042913 These Builds Are Very STABLE!
View changes & bug fixes made to our source code here http://github.com/LiquidSmooth
This is quoted from liquid0624 in the liquid smooth thread.
Sent from my SCH-I535 using xda app-developers app
redKrome said:
If you are on liquid 2.2 I believe it need a aosp 3.4 kernel. I know the latest BMS kernel works. But the latest KT747 will not work unless you are using a new nightly of liquid 2.3. Be sure to wipe cache and dalvik cache after flashing but before rebooting.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Sorry for taking forever to reply, I originally posted this on my lunch break and am finally out of work to reply freely. Anyways, I tried what you said, and downloaded the BMS 3.4 kernel that states is compatible with the version of Liquidsmooth 4.2.2 I am running. Let's just say I yet again had to restore twice once because it did exactly what I stated above, where it gives me the splash screen saying it's running the custom kernel and doesn't boot any further after the Galaxy S3 screen. The first time, I flashed it and then wiped cache/dalvik and fixed permissions before booting up like everyone says you need to do after flashing a kernel, no success.
Then, I read in the kernel's thread that there is no need to do that for this most up to date release, it says you just have to flash the kernel and reboot like with any other zip file. Well that didn't work either, and was forced to restore a backup a second time! What could the problem be?! I'm using the most updated version of TWRP, I'm on the most updated nightly of the Liquidsmooth ROM, I'm using a highly confirmed working and compatible kernel, and following the directions to the T! When it comes to flashing a different ROM, modem, rpm, backup, etc. I have no problem whatsoever. But trying to flash a kernel has never been successful for me so far
Any help from anyone else? It's frustrating that I've never been able to flash any kernels to any ROM I've ever run
Sent from my Samsung SCH-I535 running Liquidsmooth 4.2.2
Im no expert on any of this but this is what i would do. Odin back to stock ROM and reroot and unlock bootloader. Id do this cause i would want a clean slate so i know there is no previous kernel/rom files that may be effecting something. Make a new nandroid backup then reflash the rom ya want to use. Once booted up and everything is running, restart the phone and boot into recovery. Wipe the dalvik and cache like normal then flash the kernel. Hopefully that would take care of the problem.
Only other thing i can think of is to maybe wipe data/factory reset like 2 or 3 times and wipe the caches again and reinstall your current rom. Then flash the kernel. Other than that im out of ideas. Hopefully someone can get your problem solved!
Sent from my SCH-I535 using xda premium

[Q] Viper XL to CM10 ROM

Hey guys,
I decided to make the transition over to CM, however I'm having boot loop issues with CM10. Here's the steps that I've taken in order to flash the ROM (what I though was properly):
Download CM10 Stable for HTC One XL
Wipe Cache and Davlik Cache
Factory Reset
Install CM10 .zip from TWRP 2.3.3
Flash boot img using TN WIN Boot Installer
However, as I've previously stated, I'm stuck on the CM boot logo. Any suggestions, I'm at a loss?
Thanks.
Solved the problem. I had to flash the boot img BEFORE flashing the ROM. Mistake on my part.
Mods -- feel free to delete this thread.
Thanks.
It should make no difference if you flash before or after.
Sent from my Sony Tablet S using xda app-developers app

[Q] CM Stuck on logo animation while booting

Hi – I have a stubborn issue with my Blaze 4G not working on CM roms, I would appreciate any help you guys can provide. Below are the details:
I recently bought a T-Mobile Samsung Galaxy S Blaze 4G, and did the following:
- Rooted it using the following guide (it now has ICS)
- SIM Unlocked it using the following guide (now it works on other networks)
- Updated to CWM 6.0.3.8, since JB roms needs it
- Flashed the T769-UVLH5 modem, since CM support it
And now when I flash CM 10 stable or 10.2 nightly it gets stuck in booting and displaying the CM logo animation screen, after few minutes it reboots and does it all over again.
I remember when I upgraded to CM JB on my SGS3 I needed to flash a JB stock rom on it to get the new boot loaders for JB, but I saw no mention of this on this forum. What else am I missing?
Thanks.
TINGEA said:
Hi – I have a stubborn issue with my Blaze 4G not working on CM roms, I would appreciate any help you guys can provide. Below are the details:
I recently bought a T-Mobile Samsung Galaxy S Blaze 4G, and did the following:
-Rooted it using the following guide (it now has ICS)
-SIM Unlocked it using the following guide (now it works on other networks)
-Updated to CWM 6.0.3.8, since JB roms needs it
-Flashed the T769-UVLH5 modem, since CM support it
And now when I flash CM 10 stable or 10.2 nightly it gets stuck in booting and displaying the CM logo animation screen, after few minutes it reboots and does it all over again.
I remember when I upgraded to CM JB on my SGS3 I needed to flash a JB stock rom on it to get the new boot loaders for JB, but I saw no mention of this on this forum. What else am I missing?
Thanks.
Click to expand...
Click to collapse
You wiped data/cache/system? Reinstall it. Anyways use the new 6.0.4.4 recovery.
Sent from my SAMSUNG-SGH-T769 using Tapatalk
Somcom3X said:
You wiped data/cache/system? Reinstall it. Anyways use the new 6.0.4.4 recovery.
Sent from my SAMSUNG-SGH-T769 using Tapatalk
Click to expand...
Click to collapse
Thanks Somcom. I have to admit that I forgot to do the wipes. but even after doing the wipes (data/system/ factory rest/ cach/devalk) and reinstalling the CM nightly, I still have the same issue.
as for recovery, I updated to the latest version using the rom manager, and according to the official site clockworkmod[dot]com[slash]rommanager (can't post links) I have the latest version for Blaze. how do you get the 6.0.4.4 on blaze?
I still feel it's a ICS vs JB bootloaders issue, but not sure how to proceed next.
Thanks!
TINGEA said:
Thanks Somcom. I have to admit that I forgot to do the wipes. but even after doing the wipes (data/system/ factory rest/ cach/devalk) and reinstalling the CM nightly, I still have the same issue.
as for recovery, I updated to the latest version using the rom manager, and according to the official site clockworkmod[dot]com[slash]rommanager (can't post links) I have the latest version for Blaze. how do you get the 6.0.4.4 on blaze?
I still feel it's a ICS vs JB bootloaders issue, but not sure how to proceed next.
Thanks!
Click to expand...
Click to collapse
No boot loaders man. This is before Samsung's complications.
Recovery is here.
http://d-h.st/AFu
Sent from my SAMSUNG-SGH-T769 using Tapatalk
Thanks Somcom3X, but still didn't work. When installing the CM room in recovery 6.0.4.4 I get a bunch of getprop assert failures. This used to work on the previous version (6.0.3.8). Now the Rom won't install.
Also, I'm curious what did you mean by this is before Samsung's complications?
Thanks
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
TINGEA said:
Thanks Somcom3X, but still didn't work. When installing the CM room in recovery 6.0.4.4 I get a bunch of getprop assert failures. This used to work on the previous version (6.0.3.8). Now the Rom won't install.
Also, I'm curious what did you mean by this is before Samsung's complications?
Thanks
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
After 2011 samsung began installing software and counters to try and prevent people from rooting and installing custom firmwares.
knox is an example of this.
These devices don't have any of that complicated security.
You handy with odin? Your recovery is not right. Just to be clear, what is your model number?
If it is T 7 6 9, your good to go to odin. I'd recommend going back to stock, and then install a recovery and you should be good to go.
Somcom3X said:
After 2011 samsung began installing software and counters to try and prevent people from rooting and installing custom firmwares.
knox is an example of this.
These devices don't have any of that complicated security.
You handy with odin? Your recovery is not right. Just to be clear, what is your model number?
If it is T 7 6 9, your good to go to odin. I'd recommend going back to stock, and then install a recovery and you should be good to go.
Click to expand...
Click to collapse
Thanks again, I use the guide here to convert the image into a tar.md5 to flash using odin, but after flashing successfully I still have the same issue when installing the CM zip file in recovery, and yes it is the T-mobile Samsung Galaxy S Blaze 4G T769.
any other possible causes?
BTW - when I was flashing via Odin my upload phone screen was showing that I have a custom rom and the counter was 1.... do I need to fix that?
TINGEA said:
Thanks again, I use the guide here to convert the image into a tar.md5 to flash using odin, but after flashing successfully I still have the same issue when installing the CM zip file in recovery, and yes it is the T-mobile Samsung Galaxy S Blaze 4G T769.
any other possible causes?
Click to expand...
Click to collapse
SOLUTION:
The reason your stock recovery system keeps getting overwritten at Android startup is because of a script that is being run.* All you need to do is either rename this script or simply delete it.
Please keep in mind that if you restore your stock ROM, this script will be restored with it so you will have to rename or delete it again.* Do the following:*
1.
Make sure your device is powered on and running normally,
2.
Make sure you have rooted your device and that you have all of the necessary permissions in order to manipulate system files.*
3.
In the root file system go to \system\etc
4.
Find the file named install-recovery.sh and either rename it or, as I did, delete it.*
That’s all there is to it.*
Please keep in mind that you will need to flash your custom system recovery one more time after modifying the script file.* After that, reboot away and you will always be able to get back into your new system recovery.
Good Luck and Happy Tweaking.
Click to expand...
Click to collapse
Try that.
Found it here http://mark.candleshoreblog.com/201...-factory-stock-roms-at-android-system-reboot/
Sent from my SAMSUNG-SGH-T769 using Tapatalk
Somcom3X said:
Try that.
Found it here http://mark.candleshoreblog.com/201...-factory-stock-roms-at-android-system-reboot/
Sent from my SAMSUNG-SGH-T769 using Tapatalk
Click to expand...
Click to collapse
Thanks Somcom3X - but I'm not sure this is needed for my case. I read the original blog post and my recovery does not get overwritten. I actually rebooted multiple times into CWM recovery and each time it is the same 6.0.4.4.
I also went into the /system/etc folder and there is no install_recovery.sh file.
to clarify, here is where I'm stuck now:
- when I use CWM 6.0.3.8 CM install completes successfully, but then CM will not boot, and will keep on cycling on the boot logo screen.
- when I use CWM 6.0.4.4 I can't start to install CM as it complained that my phone is not t769.
in all cases I'm using CM 10.2 nightly for T769.
Thanks for the help.
You should delete assert lines at the top of the zip's updater-script and it will let you flash it.
Sent from my SAMSUNG-SGH-T769 using Tapatalk
I removed the assert lines from the updater script, and it was able to complete the install process afterwards, however when I booted the new CM 10.0 system it got stuck on the cyanogenmod boot logo. I made sure I do a system/data rest, cleared cash, and cleared devalk.
I do not think it's an issue with my recovery as I'm getting the same result as I did with the official 6.0.3.8.
Something else is going on.
Any ideas?
Thanks.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
TINGEA said:
I removed the assert lines from the updater script, and it was able to complete the install process afterwards, however when I booted the new CM 10.0 system it got stuck on the cyanogenmod boot logo. I made sure I do a system/data rest, cleared cash, and cleared devalk.
I do not think it's an issue with my recovery as I'm getting the same result as I did with the official 6.0.3.8.
Something else is going on.
Any ideas?
Thanks.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Tar back to stock GB. Upgrade to ICS. Then root and install cwm. Flash away
Sent from my SAMSUNG-SGH-T769 using Tapatalk
Somcom3X said:
You should delete assert lines at the top of the zip's updater-script and it will let you flash it.
Sent from my SAMSUNG-SGH-T769 using Tapatalk
Click to expand...
Click to collapse
Thanks Somcom3X - but this is more trouble than what I wanted to put in - I'll stick with the rooted stock ROM I have. I was hoping the process was a little more straight forward, similar to my SGS3.
thanks for all your help thus far!
Somcom3X said:
Tar back to stock GB. Upgrade to ICS. Then root and install cwm. Flash away
Sent from my SAMSUNG-SGH-T769 using Tapatalk
Click to expand...
Click to collapse
Ok, my rooted ICS stock is acting up (random shutdowns and such), so I need to give this another try and get this phone to CM.
I tared back to stock GB, skipped the upgrade to ICS (was not able to upgrade via the ROM software update option), flashed CWMR (5.0.4.x) via Odin, upgraded to CWMR 6.0.4.5, installed CM 11 nightly, and then wiped data/factory rest and Dalvik .... and ....
it is still stuck on the boot screen....
I seriously would appreciate a silver bullet right now!
TINGEA said:
Ok, my rooted ICS stock is acting up (random shutdowns and such), so I need to give this another try and get this phone to CM.
I tared back to stock GB, skipped the upgrade to ICS (was not able to upgrade via the ROM software update option), flashed CWMR (5.0.4.x) via Odin, upgraded to CWMR 6.0.4.5, installed CM 11 nightly, and then wiped data/factory rest and Dalvik .... and ....
it is still stuck on the boot screen....
I seriously would appreciate a silver bullet right now!
Click to expand...
Click to collapse
Hmm. Go back to stock ics, flash a 10.2 recovery, then flash whatever you desire.
Sent from my SAMSUNG-SGH-T769 using Tapatalk
What is a10.2 recovery? Is it a certain version of CWMR? And do I need to flash it via Odin? Thanks
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
TINGEA said:
What is a10.2 recovery? Is it a certain version of CWMR? And do I need to flash it via Odin? Thanks
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
It would be cwm 6.0.2.7
You can flash the img through a zip or by terminal on the phone.
Odin needs a tar'd recovery img
Sorry been very busy.
Have you tried this?
http://forum.xda-developers.com/showthread.php?t=2577265
Sent from my SAMSUNG-SGH-T769 using Tapatalk
Thanks Somcom3X - I looked all over this forum and the internet, and could not find a link for a 6.0.2.7 CWM for Blaze - I found it for other phones but not Blaze. can you please point me to a link if you happen to know of one. the official site does not have an archived list of previous versions.
as for the provided link, I did follow it through, and downloaded the recovery Tar (it was CWM 5.5.04) but that yielded the same results after installing CM 10 and 10.2 - stuck at boot screen logo. I'm reasonably confident now that it is not a recovery issue, as I flashed half a dozen different versions and none worked with CM 10, 10.2, or 11.... it has to be something else!
Thanks.
TINGEA said:
Thanks Somcom3X - I looked all over this forum and the internet, and could not find a link for a 6.0.2.7 CWM for Blaze - I found it for other phones but not Blaze. can you please point me to a link if you happen to know of one. the official site does not have an archived list of previous versions.
as for the provided link, I did follow it through, and downloaded the recovery Tar (it was CWM 5.5.04) but that yielded the same results after installing CM 10 and 10.2 - stuck at boot screen logo. I'm reasonably confident now that it is not a recovery issue, as I flashed half a dozen different versions and none worked with CM 10, 10.2, or 11.... it has to be something else!
Thanks.
Click to expand...
Click to collapse
I'm very sorry for the delay. Been very very busy.
https://www.dropbox.com/s/awp1zy4u3x34a2v/CWM-cm-10.2-Recovery-t769.zip
That is my personal 10.2 recovery. Works fine for me.
The author is me, but I was too lazy to change the lines.
Sent from my SAMSUNG-SGH-T769 using Tapatalk

Am I destined for eternal stock Android?

The only thing I can seem to successfully flash is faux123's kernel; not a single ROM has worked. I've tried flashing and wiping cache/data in every imaginable order, reinstalling stock 4.4.2 + stock kernel and flashing from there, installing from CWM 6.0.4.6 and TWRP (haven't tried 6.0.4.7 because I know it won't work), everything. All I ever get are boot logos.
What the hell am I doing wrong?
Sent from my XT1034 using XDA Premium 4 mobile app
Try going back to jelly bean, install CWM for 4.3 bootloader and install CM11 on it without going to kk.
Sent from my XT1032 using Tapatalk
Not sure this is your issue
I've seen a section in here for a corrupted boot loader here maybe that will help.
http://forum.xda-developers.com/showthread.php?t=2623587

Categories

Resources