Hey guys,
I decided to make the transition over to CM, however I'm having boot loop issues with CM10. Here's the steps that I've taken in order to flash the ROM (what I though was properly):
Download CM10 Stable for HTC One XL
Wipe Cache and Davlik Cache
Factory Reset
Install CM10 .zip from TWRP 2.3.3
Flash boot img using TN WIN Boot Installer
However, as I've previously stated, I'm stuck on the CM boot logo. Any suggestions, I'm at a loss?
Thanks.
Solved the problem. I had to flash the boot img BEFORE flashing the ROM. Mistake on my part.
Mods -- feel free to delete this thread.
Thanks.
It should make no difference if you flash before or after.
Sent from my Sony Tablet S using xda app-developers app
Related
Hi there all. Trying to get CM9 alpha 12 to run on my HTC Ville EU.
Currently im running trickdroid 4.4 without any problems.
Wanted to try this room as this is CM9. but with only bootloop.
Tested AOKP this works with no bootloop. Flash process i did is as folloing.
Reboot recovery.
Backup
Wipe Data
Wipe Cache
Wipe Dalvik
Flash room (Tested in CMW and TWRP)
Flashed Gapps (and gapps fixed for Hybrid rom)
Flashed Boot.img when using CMW
Bootloop
Rebooted in recovery
Wiped Cache
Dalvik
Rebooted now bootlooped for 15 min
Hope anyone can help me.
Don't think you can flash boot.img in CWM, must flash separately using fastboot. This is a limitation in CWM for now if your phone is S-on. Not sure why AOKP worked for you, should have been same result unless it worked with your old trickdroid kernel, or your phone was fastboot booted into CWM.
Try using Twrp (recovery) it flashes boot.IMG without problems.
Sent from my HTC VLE_U using xda app-developers app
frdd said:
Don't think you can flash boot.img in CWM, must flash separately using fastboot. This is a limitation in CWM for now if your phone is S-on. Not sure why AOKP worked for you, should have been same result unless it worked with your old trickdroid kernel, or your phone was fastboot booted into CWM.
Click to expand...
Click to collapse
frdd is completely right- you must use fastboot for boot.img flashing.
This is the first time have i downloaded a rom and so i got cm10 and now it's just stuck at the boot animation. PLEASE HELP!!!
Maybe you had downloaded a wrong version of ROM that incompatible with your device. Try flash other ROM may helps.
Sent from my Nexus S using xda premium
Droidnet101 said:
This is the first time have i downloaded a rom and so i got cm10 and now it's just stuck at the boot animation. PLEASE HELP!!!
Click to expand...
Click to collapse
go to recovery then make sure you have done ALL of these:
-Wipe Cache/Dalvik Cache
-Wipe System
-Factory Reset
-Reflash ROM
-flash gapps
I read on flip board that cm 10.1 is official for our phone and I I want to flash it and I did but the after I flash it and flash the boot.IMG it get stuck on the HTC logo and I see that the soft key button turn on and have vibration when I touch them can anyone help .
Sent from my HTC One S using xda premium
Do you have an S4 or S3 phone
Did you check md5 for good/bad download
Did you wipe all including System 2x in recovery
Which recovery are you using
I have s4 and I didn't check the md5 cause all 4.2 ROMs have the same problem for me,i have twrp
Sent from my HTC One S using xda premium
which version twrp. some of the later 2.3's had issues
otherwise if you are wiping all and fastbooting boot, not sure
fastboot boot after rom and fastboot erase cache before booting onto rom
rugmankc said:
which version twrp. some of the later 2.3's had issues
otherwise if you are wiping all and fastbooting boot, not sure
fastboot boot after rom and fastboot erase cache before booting onto rom
Click to expand...
Click to collapse
I have v 2.3.3.0 for twrp I'll update it and try what you said and report back here if it works
Sent from my HTC One S using xda premium
i had 2.3.3.0 and it was not one of the bad ones
Still doesn't work and I tried force md5 sum check on twrp and it failed could that be the problem
Sent from my HTC One S using xda premium
brandontamas said:
Still doesn't work and I tried force md5 sum check on twrp and it failed could that be the problem
Sent from my HTC One S using xda premium
Click to expand...
Click to collapse
I'd reccomend clockworkmod over twrp, had more bootloops with twrp in the past.
Also, good alternative rom is dark jelly cm10.1 with android 4.2.1 stable and reliable, using it a pretty long time.
Easy install via an automatic installer program called aroma installer, no need to flash boot.img here
http://forum.xda-developers.com/showthread.php?t=2051865
Sent from my One S using xda app-developers app
yes, ck your md5's. i use es explorer and it is easy
as john said you can try another rom, but still ck md5 and wipe system as part of your wipes
if you flash a rom with aroma, don't wipe in recovery and aroma. only one. i prefer recovery
as for cwm or twrp. everyone has their favorite. it is my understanding though cwm hasn't kept pace on updates with later version roms afaik
hope you get it--
Hi,
I have AT&T Motorola Atrix 2 MB-865 , i was on official ICS after root unlock I flushed pa_edison-3.69-20130729-nokex.zip rom to my atrix 2, using http://forum.xda-developers.com/showthread.php?t=2050705
i did factory reset, data format system, format cache and etc before flushing that ROM after successful flush , I rebooted , after reboot it keep stuck (does't not hang just stuck) on paranoid boot screen, i tried to flush again but same result in addition i want to say i flushed only rom , no gapps, , now i am again on ics_edison using RDS Lite ,Please any one tell me where i am wrong
Thanks in advance.
cheeta123 said:
Hi,
I have AT&T Motorola Atrix 2 MB-865 , i was on official ICS after root unlock I flushed pa_edison-3.69-20130729-nokex.zip rom to my atrix 2, using http://forum.xda-developers.com/showthread.php?t=2050705
i did factory reset, data format system, format cache and etc before flushing that ROM after successful flush , I rebooted , after reboot it keep stuck (does't not hang just stuck) on paranoid boot screen, i tried to flush again but same result in addition i want to say i flushed only rom , no gapps, , now i am again on ics_edison using RDS Lite ,Please any one tell me where i am wrong
Thanks in advance.
Click to expand...
Click to collapse
Firstly its FLASH not FLUSH.!! On which system did you flash the ROM.. If you have flashed on 2nd system you should not wipe data... It will wipe out your other partitions... And did you flash via bmm or cwm??
Sent from my MB865 using XDA Premium HD app
nikhJ said:
Firstly its FLASH not FLUSH.!! On which system did you flash the ROM.. If you have flashed on 2nd system you should not wipe data... It will wipe out your other partitions... And did you flash via bmm or cwm??
Sent from my MB865 using XDA Premium HD app
Click to expand...
Click to collapse
he's is in a habit of writing 'flush' in place of 'flash' (see his other posts)
sent from my A2 running ÑÜMÅ3.0
$ÇÏÊÑÇÈ is the only TRUTH
Re
nikhJ said:
Firstly its FLASH not FLUSH.!! On which system did you flash the ROM.. If you have flashed on 2nd system you should not wipe data... It will wipe out your other partitions... And did you flash via bmm or cwm??
Sent from my MB865 using XDA Premium HD app
Click to expand...
Click to collapse
I used Atrix2BootStrap.apk which seem like CWM based, there was no option 1st system or second system, it was like standard flashing(means normally we flash using Clock world recovery so no 1s or seccond system option appeared).
cheeta123 said:
I used Atrix2BootStrap.apk which seem like CWM based, there was no option 1st system or second system, it was like standard flashing(means normally we flash using Clock world recovery so no 1s or seccond system option appeared).
Click to expand...
Click to collapse
i think this rom can be install via BMM only... my friend has do like what you do before..... the only you can do is FXZ to stock,root,and then go to play store, install BMM 0.3..... dont install bootstrap.apk again after installing BMM and you will be fine...
I seem to have a similar issue.
First of all although this is my first post on XDA I'm not new to flashing and using Custom Roms infact I have been using CM 10.1 versions switching back and forth between 4.1.2 when I run into trouble.
I decided to give PA a shot and seem to have run into a wall. I flashed PA nokex on system 3 (which previously had CM10.1 - JBX 0.8.1(kernel)).
Before flashing PA on it I destroyed and recreated system, data and cache partitions so I didn't see the need to do wipes on them again. Nevertheless I did dod wipes. Flashed PA nokex, Gapps, wiped dlavik cache and rebooted. (Using BMM ofcourse)
I am stuck at a black screen with the red LED. I would really like to sample PA so any help would be really appreciated.
blazebud350 said:
I seem to have a similar issue.
First of all although this is my first post on XDA I'm not new to flashing and using Custom Roms infact I have been using CM 10.1 versions switching back and forth between 4.1.2 when I run into trouble.
I decided to give PA a shot and seem to have run into a wall. I flashed PA nokex on system 3 (which previously had CM10.1 - JBX 0.8.1(kernel)).
Before flashing PA on it I destroyed and recreated system, data and cache partitions so I didn't see the need to do wipes on them again. Nevertheless I did dod wipes. Flashed PA nokex, Gapps, wiped dlavik cache and rebooted. (Using BMM ofcourse)
I am stuck at a black screen with the red LED. I would really like to sample PA so any help would be really appreciated.
Click to expand...
Click to collapse
i think PA non kexec is for ICS base only!
¢@®bøÑ///JBX
Super_Commando said:
i think PA non kexec is for ICS base only!
¢@®bøÑ///JBX
Click to expand...
Click to collapse
Yeah. I flashed the kexec version and it booted up fine... Thank you.
Hi there,
I am currently installing Cyanogenmod 10.1 for my HTC Sensation. I'm stuck in the blue circle loading screen. (image below)
I don't know what should I do.
Help will be highly appriciated.
Sent from my HTC One using xda app-developers app
idomohr25 said:
Hi there,
I am currently installing Cyanogenmod 10.1 for my HTC Sensation. I'm stuck in the blue circle loading screen. (image below)
I don't know what should I do.
Help will be highly appriciated.
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
probably you are on S-ON am i right?
if yes use 4ext recovery
enable smatflash from it
flash the rom
done
otherwise flash the boot.img of the rom via fastboot command
My device is S-OFF.
I am trying to flash firmware again, and clear cache and dalvik.
idomohr25 said:
My device is S-OFF.
I am trying to flash firmware again, and clear cache and dalvik.
Click to expand...
Click to collapse
Most of the time there is no need to re-flash firmware. Did you wipe data beforehand? maybe you can try another build (the from an earlier/later date). This might help.
Sometimes a complete wipe is needed...
Hi,
Sometimes when moving from one ROM to another a complete wipe and format of all partitions (except sdcard) is needed in order for it to work. Have you wiped and formatted all your partitions before flashing the ROM? I use Titanium pro to backup my apps before doing this.
You should be able to do this with any of the recovery programs. 4EXT is really good and easy to use for this. Also, if you don't already know this, you should flash the correct GAPPS for your ROM after you install the update. That way you will have everything you need on your first boot after your flash.
Good luck!
when i updated my firmware from 3.32 to 3.33 i got stuck at the same screen. Just booted to recovery and used 4EXT Recovery touch to wipe cache and dalvik, after that everything was fine