Database Info

[D2403] Easy ROOTing and Safety unlocking bootloader

My method is completely safe and tested repeatedly. Thanks to my friend and kernel developers Freack_v from XDA, I can provide you with a working kernel unRIC for D2403 with CWM recovery. Original thread on 4pda.ru/forum
What you need:
Download stock JB 4.3 for D2303 (don't worry).
Download stock 4.4.4 for D4303
Download Towelroot
Flashtool latest version.
BackupTA 9.11 tool
UpdateSuperSU.zip for CWM install
Download kernel unRIC for D2403 with CWM recovery
----- And so everything is ready------
Run FLASHTOOL and flash the 4.3 to phone. You have now just M2.
Run towelroot and makeitrain. Now you have ROOT.
Plug again to Flashtool and backup rawTA partition (need enabled usb debugging). In the folder .../flashtool/custom/ appears folder with the name of the serial number of your M2 AQUA.
For redundancy, you can make a backup through utility BackupTA. You now have a backup TA partition with DRM keys. Now you can always bring them back and bring the phone to the factory state.
The next step is to unlock the bootloader (in the forum thread has instructions)
The Next step is to flash the latest stock firmware 4.4.4, you can immediately connect in fastboot mode (for economy time to booting) and flash the kernel unRIC for D2403 with CWM or ALL M2 wit TWRP recovery from attached files.
Acces to RECOVERY - When it booting hold down the volume down button as soon as the lights pink LED, releasing this button when orange LED.
flash updateSuperSu.zip in CWM and reboot.
ALL done - you have full ROOT + CWM + backup TA (DRM keys)
IF you can't enter in to recovery try attached kernel ****SHIFT GPIO*** or download http://forum.xda-developers.com/showpost.php?p=60379837&postcount=22
CWM Kernel by Freack_v good work with new Firmware *.1.13
Sorry for my English

Where can I find the kernel?
inside!out said:
My method is completely safe and tested repeatedly. Thanks to my friend and kernel developers Freack_v from XDA, I can provide you with a working kernel unRIC for D2403 with CWM recovery. Original thread on 4pda.ru/forum
What you need:
Download stock JB 4.3 for D2303 (don't worry).
Download stock 4.4.4 for D4303
Download Towelroot
Flashtool latest version.
BackupTA 9.11 tool
UpdateSuperSU.zip for CWM install
Download kernel unRIC for D2403 with CWM recovery
----- And so everything is ready------
Run FLASHTOOL and flash the 4.3 to phone. You have now just M2.
Run towelroot and makeitrain. Now you have ROOT.
Plug again to Flashtool and backup rawTA partition (need enabled usb debugging). In the folder .../flashtool/custom/ appears folder with the name of the serial number of your M2 AQUA.
For redundancy, you can make a backup through utility BackupTA. You now have a backup TA partition with DRM keys. Now you can always bring them back and bring the phone to the factory state.
The next step is to unlock the bootloader (in the forum thread has instructions)
The Next step is to flash the latest stock firmware 4.4.4, you can immediately connect in fastboot mode and flash the kernel unRIC for D2403 with CWM recovery.
When booting hold down the volume down as soon as the lights pink LED, releasing the button when orange LED.
flash updateSuperSu.zip and reboot.
ALL done - you have full ROOT + CWM + backup TA (DRM keys)
Sorry for my English
Click to expand...
Click to collapse
where to download the kernel 4.4.4 unRIC for D2403 with CWM from?

fast1968 said:
where to download the kernel 4.4.4 unRIC for D2403 with CWM from?
Click to expand...
Click to collapse
It's the last file attached, boot_D2403_4.4.4_here.zip. Just extract the archive.
I'm testing this method atm, will post my results later.
EDIT: Finally finished rooting my device... I did everything as it says, rooted and made a backup of TA, then spent some time with fastboot drivers (had to restart my w8.1 x64 to disable "driver signature enforcement" to allow installing driver), flashed 4.4.4, flashed boot, made into recovery (first question was with root permissions, I answered yes), then again into recovery, installed SuperSU, when exiting asked again about root, again yes, got stuck into bootloop... Back to recovery again, wiped everything (cache, dalvik cache and even data), phone boots up, SuperSU shows up in menu. Tried with Root Explorer, System mounts r/w nicely. Spent almost 2 hours rooting, but at least I feel safe now. As I'm a noob when it comes to Sony devices (I've only rooted a few Samsung devices), this was a very good practise!

M2 Aqua
Hello Can You Add Video Tutorial? PLS
---------- Post added at 10:42 AM ---------- Previous post was at 10:34 AM ----------
I Rooted My Xperia With Other Method. Everything Gone Fine, Root Checker Said That My Phone Is Rooted But When I Install Root Explorer And Backup Titanium To Delete Stock Apps It Says "Read Only System Files". In Your Method Can I Delete Stock Apps? Do You Test It? Sorry For Bad English. PLS Help!!!!

inside!out said:
M
[*]The Next step is to flash the latest stock firmware 4.4.4, you can immediately connect in fastboot mode and flash the kernel unRIC for D2403 with CWM recovery.
[*]When booting hold down the volume down as soon as the lights pink LED, releasing the button when orange LED.
Click to expand...
Click to collapse
can someone PLEASE explain this better? it is a little confusing

yurividal said:
can someone PLEASE explain this better? it is a little confusing
Click to expand...
Click to collapse
1 flash the latest stock firmware 4.4.4, no power on your device.
2 connect in fastboot mode and flash the kernel unRIC for D2403 with CWM recovery from attached files
3 When booting hold the volume down button as the LED lights pink, releasing the button when LED change to orange.

GioKupreishvili said:
Hello Can You Add Video Tutorial? PLS!
Click to expand...
Click to collapse
Sorry no, it's difficult for me.

Where i can download kernel unRIC for D2403 with CWM?

izsroxxx said:
Where i can download kernel unRIC for D2403 with CWM?
Click to expand...
Click to collapse
Lol. In my post. See attached files

Can you update the kernel version? Sometimes update notices annoy me.
Sent from my D2403 using XDA Free mobile app

mantazzo said:
Can you update the kernel version? Sometimes update notices annoy me.
Sent from my D2403 using XDA Free mobile app
Click to expand...
Click to collapse
Yes I can, we have new kernel on 4pda but this kernel with TWRP recovery. No problem?
CWM Kernel by Freack_v good work with new Firmware *.1.13

inside!out said:
Yes I can, we have new kernel on 4pda but this kernel with TWRP recovery. No problem?
CWM Kernel by Freack_v good work with new Firmware *.1.13
Click to expand...
Click to collapse
Well, I guess the kernel could be an option - you can flash the kernel with cwm, or flash the kernel with twrp.

@mantazzo
No, this kernel packed in img. And will be flashed through Flashtool or Fasboot application in Fastboot mode. This kernel universal. It works on all models m2 on last firmware. Hit thanks @freack_v

inside!out said:
@mantazzo
No, this kernel packed in img. And will be flashed through Flashtool or Fasboot application in Fastboot mode. This kernel universal. It works on all models m2 on last firmware. Hit thanks @freack_v
Click to expand...
Click to collapse
In my aqua d2403 doesn't works the recoverys, Appears the pink led but when i'm pressing vol- doesn't enters into recovery?

iFlashed said:
In my aqua d2403 doesn't works the recoverys, Appears the pink led but when i'm pressing vol- doesn't enters into recovery?
Click to expand...
Click to collapse
you have shifted gpio keys. try press up or insert haedphones
gpio on **06 models different from **03 models
Or try attached kernel img (flash in fastboot mode)

inside!out said:
you have shifted gpio keys. try press up or insert haedphones
gpio on **06 models different from **03 models
Or try attached kernel img (flash in fastboot mode)
Click to expand...
Click to collapse
so event4 shall work, instead of event6?
Will try.
EDIT: Noooope, it didn't work.

inside!out said:
you have shifted gpio keys. try press up or insert haedphones
gpio on **06 models different from **03 models
Or try attached kernel img (flash in fastboot mode)
Click to expand...
Click to collapse
I have the same problem as Philz Touch recovery, the led appears, but doesn't boots into recovery

linuxct said:
so event4 shall work, instead of event6?
Will try.
EDIT: Noooope, it didn't work.
Click to expand...
Click to collapse
then gpio keys not allowed. Check your gpio keys.
in terminal or ADB
1. ls -l /dev/input
2. then: getevent -lp /dev/input/event1 for each events
3. send me GPIO your buttons

inside!out said:
then gpio keys not allowed. Check your gpio keys.
Click to expand...
Click to collapse
Gonna try with getevent after dinner. I'll edit
---------- Post added at 09:42 PM ---------- Previous post was at 09:14 PM ----------
inside!out said:
in terminal or ADB
1. ls -l /dev/input
2. then: getevent -lp /dev/input/event1 for each events
3. send me GPIO your buttons
Click to expand...
Click to collapse
My gpio-keys is event7. I replaced it in e2fsck of Philz and working FINE!
Thanks for your help BTW

linuxct said:
Gonna try with getevent after dinner. I'll edit
---------- Post added at 09:42 PM ---------- Previous post was at 09:14 PM ----------
My gpio-keys is event7. I replaced it in e2fsck of Philz and working FINE!
Thanks for your help BTW
Click to expand...
Click to collapse
Yep!! Working fine!

TeamWin Recovery Project 3.0.0 Falcon[STABLE][MultiRom Bootable][DUAL SIM FUNCTIONAL]

Hey guys as you might know TWRP released their new 3.0.0 Recovery a day or two ago,I am sharing the TWRP 3.0.0 STABLE Image with working Multi ROM.
The Installation Instructions are :-
(1) Install TWRP 2.8.7 from the link in text document attached in Post via PC (you may use Flashify but I'm not quiet sure if they flash the images well as I had tried in another recovery earlier it didn't recognized 2nd sim even though the recovery supported 2 sims and then after one reboot Recovery vanished away ).
(2) Flash Optimus M-R 53 KEXEC patched Kernel from the link in text document .( Use another version according to your ROM this one is for Marshmallow only and may malfunction on other Versions ).
(3) Download & Install MutiRom Zip for installation of MultiRom from links in text document.
(4) Add any ROM's you want to as after 3.0.0 you can only boot Multiple Roms not Install any.
(5) Go to TWRP 2.8.7 Recovery and then Install TWRP 3.0.0 IMG you have the option on the screen.
(6) Reboot TWRP (Important) as otherwise the new recovery will be dissolved.
(7) Explore new TWRP/Reboot System and try MultiRom.
Optional:-
If you can't flash Kernel via TWRP directly Google Philz Recovery and use it.(Philz now uploaded on my MEGA as well ).
If you don't want MultiRom you can flash TWRP 3.0.0 directly via fast boot command:-
1- "fastboot devices"
2- "fastboot flash revovery (name).img.
3- reboot to recovery directly via Bootloader otherwise recovery will be dissolved.
Credits -Sorry I can't remember your names people .
If you like it hit the Thanks button below.
Moderator Edit: Link removed - see last post...

And the themed version??
Thanks :3
Enviado desde mi Moto G mediante Tapatalk

what if simply flash 3.0.0 directly using fastboot

Chofito said:
And the themed version??
Thanks :3
Enviado desde mi Moto G mediante Tapatalk
Click to expand...
Click to collapse
TWRP 3.0.0 is already themed.

adi1998.2010 said:
what if simply flash 3.0.0 directly using fastboot
Click to expand...
Click to collapse
Sorry,not tried if you try let me know.

Captain Price said:
Sorry,not tried if you try let me know.
Click to expand...
Click to collapse
Already flash via fastboot without any problem.
Sent from my XT1033 using Tapatalk

khairulez said:
Already flash via fastboot without any problem.
Sent from my XT1033 using Tapatalk
Click to expand...
Click to collapse
But like that You can't have MultiRom.

Will you publish the source code or even better add this as an official device to TWRP?

Captain Price said:
TWRP 3.0.0 is already themed.
Click to expand...
Click to collapse
but there is no stock multirom/twrp theme for now.
and how can you call it stable, did you follow the commits, it was biggest change in twrp and mr twrp,

sub77 said:
but there is no stock multirom/twrp theme for now.
and how can you call it stable, did you follow the commits, it was biggest change in twrp and mr twrp,
Click to expand...
Click to collapse
It is mentioned MultiRom Bootable not MultiRom recovery .It can only boot MultiRom not Install them that's why add Roms option in above the option of Flashing TWRP 3.0.0.
If you think this isn't stable try it out and let me know any trouble everything is working pretty good.

Chol said:
Will you publish the source code or even better add this as an official device to TWRP?
Click to expand...
Click to collapse
Our device is an Officially supported TWRP device but there are no official maintainer of Falcon therefore this is an Unofficial version. ,The source code isn't actually shared,Sorry.

Captain Price said:
Our device is an Officially supported TWRP device but there are no official maintainer of Falcon therefore this is an Unofficial version. ,The source code isn't actually shared,Sorry.
Click to expand...
Click to collapse
this is open source, you need to share your source...

hurtsky said:
this is open source, you need to share your source...
Click to expand...
Click to collapse
Why ?,Is there a rule or something?

Captain Price said:
Why ?,Is there a rule or something?
Click to expand...
Click to collapse
Yes - the GPL Here and the base TWRP source Here
You MUST also have permission to use AND provide credits - "Can't remember" is no use.
Thread closed until compliant.

[TESTING][ROM][7.1.2] CM14.1 for janice [TESTERS NEEDED]

02/22 Update: Project temporarily on hold until March due to school.
03/19 Update: I'm back.
03/27 Update: It booted
Hi S Advance Community! I don't own this device but I compiled CM14.1 and I need testers who know how to logcat, use odin to reflash boot image, etc.
THIS BUILD IS TOTALLY UNTESTED (i don't have an s advance)!!! AS A RESULT, RECOVERY MODE MIGHT NOT WORK AFTER FLASHING THIS ROM AND YOU'LL NEED TO FLASH STOCK ROM USING ODIN IF THAT HAPPENS!
I just need info if it boots or not, and logcat/last_kmsg if it doesn't.
Link of rom (for advanced users only)
YOU AGREE TO NOT KILL ME FOR ANYTHING THAT HAPENS TO YOUR PHONE!
https://www.androidfilehost.com/?fid=745425885120695238 (again, FLASH AT YOUR OWN RISK)
Kernel Source (for GPL Compliance)
EDIT: Use this guide on how to make a logcat/last_kmsg dump when the ROM doesn't boot if you don't know how to (no need to flash the zip on that thread as this rom is an eng build already).
EDIT #2: ROM doesn't boot so I need the /proc/last_kmsg file obtainable from recovery after a failed boot.

Thanks! Downloading it ?

I'm waiting for feedback from the already downloaded it. If successful, please share some screenshots. Thanks in advance guys.

No-Lags said:
I'm waiting for feedback from the already downloaded it. If successful, please share some screenshots. Thanks in advance guys.
Click to expand...
Click to collapse
Sure

Hello the installation was a success, but when he went to the screen from Samsung he stayed frozen in it.

GabrielR52 said:
Hello the installation was a success, but when he went to the screen from Samsung he stayed frozen in it.
Click to expand...
Click to collapse
Thanks for testing! While the phone is stuck on the samsung logo, can you press the 3 button combo for recovery for 10+ seconds (without pulling the battery before) until the phone boots to recovery and copy /proc/last_kmsg to sdcard using recovery then upload it here? I need to see the kernel logs if it's an init related issue or a library related one.

Yea ! The installation was a success but it didn't boot...Stuck On the splash screen...I will flash it again and will let you know the kernal logs and stuff.....Thanks For your support for Janice

I will send tomorrow because today i haven't had the time, so that the last time I installed this android even holding the 3 keys to enter the recovery mode the cell phone was stopped on the logo of samsung, would have some other way of copying the /proc/last_kmsg ? But tomorrow i will install again and I'll see if i go into recovery, sorry my english if it is bad is that i am from Brazil

On Codina must be enabled SELINUX with boot parameter - 1 and cmdline=selinux.bootmode=permissive to boot up Nougat. For MM this wasn't needed.

Can someone try flashing this boot.img to see if the rom will boot?
https://drive.google.com/open?id=0Bw4AfK_vJ7JycWV4TmlOeldzWkE

3liteking148 said:
Can someone try flashing this boot.img to see if the rom will boot?
https://drive.google.com/open?id=0Bw4AfK_vJ7JycWV4TmlOeldzWkE
Click to expand...
Click to collapse
After flashing the rom do i have to flash it with recovery?

Tech x 125 said:
After flashing the rom do i have to flash it with recovery?
Click to expand...
Click to collapse
Flash it with TWRP (because twrp can flash images since 3.0)

Rom isn't boot. I'm using Phiz-touch
After flash not work recovery

psycrow17 said:
Rom isn't boot. I'm using Phiz-touch
After flash not work recovery
Click to expand...
Click to collapse
Thanks for reporting! No wonder why no one's giving me logs so I'm gonna make an odin flashable boot.img later with working recovery from some rom.

Hi guys! This is the just the odin-flashable tar of the boot image of PolishVodka's CM14.1 as recovery was said to work there.
https://drive.google.com/open?id=0Bw4AfK_vJ7JycVBST3pwS18tdms

Can I expect the recovery has been immersed in a new build? Maybe I'll try for it.

3liteking148 said:
Hi guys! This is the just the odin-flashable tar of the boot image of PolishVodka's CM14.1 as recovery was said to work there.
https://drive.google.com/open?id=0Bw4AfK_vJ7JycVBST3pwS18tdms
Click to expand...
Click to collapse
You know we have kernel + ramdisk + recovery on the same partition (initramfs)?
And here you'll see how this working:
https://github.com/Epirex/Samsung_STE_Kernel/blob/marshmallow/usr/u8500_initramfs.list

PolishVodka said:
You know we have kernel + ramdisk + recovery on the same partition (initramfs)?
And here you'll see how this working:
https://github.com/Epirex/Samsung_STE_Kernel/blob/marshmallow/usr/u8500_initramfs.list
Click to expand...
Click to collapse
Yeah I know about that partitioning layout but how should i name the initramfs for flashing in odin?
Edit: nvm about that i got what you're saying that there's something wrong about my initramfs. Thanks for the info

I could not install this new boot.img by Odin and cannot seem to get the log by logcat by that of a mistake "/sbin/sh: exec: line 1: logcat: not found"

????

[RECOVERY][OFFICIAL][treble] TWRP v3.2.x for Redmi 6 pro(sakura)

Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
CHANGELOG for 3.2.3-0:
Fixed automatic installing of OTA zips on encrypted devices
Remove SuperSU from TWRP
Support both md5 and md5sum file extensions when doing MD5 checking for zip files
Flashing:
Note: this device has anti roll back
Code:
fastboot boot twrp-sakura.img
it'll boot to TWRP... now flash the recovery again with TWRP
Internal showing 0 mb ?
format data... including Internal storage to remove encryption
Downloads: for Redmi 6 pro
Credits:
~ TeamWin
~ CM/Lineage/Omni android
~ Tingyi Chen, sarthak malla
~ @CrazyBirdie1 our pro tester ;-;
Device tree: here
Kernel: prebuilt, from stock miui rom
XDA:DevDB Information
official twrp, Tool/Utility for the Xiaomi Redmi 6 Pro
Contributors
aragon12
Source Code: http://github.com/teamwin
Version Information
Status: Stable
Stable Release Date: 2018-10-09
Created 2018-10-09
Last Updated 2018-10-08

reserved

Thanks for this. I was beginning to regret buying sakura since there was no development other than those GSI's. This was a breath of fresh air. Is the full device tree up?

Sir very happy to see you here. I have seen your work for land, hope to see similar kind of development here. I hope more peoples will come here soon.

Procedures after booting into TWRP?
Hi Sir,
Thanks for the update with TWRP for Redmi6 Pro first, i am just confused about what do you mean by "flashing twrp after booting into TWRP.img", i know i can do that by install disk image in twrp, but it asks for file decryption password, otherwise twrp shows 0MB for every partition.
So there is nothing to flash.
What should i do about that? If you can provide some suggestions that would be great!

Anyone tried on mia2 lite?
Edit: Boots, but partition-scheme kills the fun... Data can be formatted, but all other partitions can´t be mounted. Flashing back stock recovery and wiping data with stock brings everything to normal...

You can always use memory card.
madhead2333 said:
Hi Sir,
Thanks for the update with TWRP for Redmi6 Pro first, i am just confused about what do you mean by "flashing twrp after booting into TWRP.img", i know i can do that by install disk image in twrp, but it asks for file decryption password, otherwise twrp shows 0MB for every partition.
So there is nothing to flash.
What should i do about that? If you can provide some suggestions that would be great!
Click to expand...
Click to collapse

Anyone here tried rooting via Magisk? Also, flashing the TWRP image after after booting into it will make it persistent, right?

coolek33 said:
You can always use memory card.
Click to expand...
Click to collapse
Sure, i will try it.
ty

DJBhardwaj said:
Anyone here tried rooting via Magisk? Also, flashing the TWRP image after after booting into it will make it persistent, right?
Click to expand...
Click to collapse
Magisk works well no problem..however i cant seem to boot into twrp, it always boots into mi recovery..only way i booted to twrp is by using pc.

loseyourself said:
Magisk works well no problem..however i cant seem to boot into twrp, it always boots into mi recovery..only way i booted to twrp is by using pc.
Click to expand...
Click to collapse
Not even after flashing the recovery image in TWRP itself?

DJBhardwaj said:
Anyone here tried rooting via Magisk? Also, flashing the TWRP image after after booting into it will make it persistent, right?
Click to expand...
Click to collapse
DJBhardwaj said:
Not even after flashing the recovery image in TWRP itself?
Click to expand...
Click to collapse
It didnt work for me..flashed the recovery partition with twrp from booted twrp many times.. no luck..vol up + pwr button same mi recovery 3
I've read somewhere that because i've been using miui it always boots up in mi recovery..
I cant seem to remember if i had working twrp with miui before in previous mi phones..

loseyourself said:
It didnt work for me..flashed the recovery partition with twrp from booted twrp many times.. no luck..vol up + pwr button same mi recovery 3
I've read somewhere that because i've been using miui it always boots up in mi recovery..
I cant seem to remember if i had working twrp with miui before in previous mi phones..
Click to expand...
Click to collapse
Try both vol up+down+power together

loseyourself said:
it always boots into mi recovery.
Click to expand...
Click to collapse
If mi recovery is present then it means you didn't flash twrp img after booting into it. Follow the instructions carefully.

So all of you folks have already unlocked the bootloader of your Redmi Note 6 Pro and are using TWRP?
I tried unlocking mine on the 10th and was given a 30-day waiting lockout before I could unlock my bootloader

IceBreakr said:
If mi recovery is present then it means you didn't flash twrp img after booting into it. Follow the instructions carefully.
Click to expand...
Click to collapse
Are you able to access twrp using keys? Because i flashed many times using booted twrp..i must be doing something wrong..
---------- Post added at 12:02 AM ---------- Previous post was at 12:01 AM ----------
NaYaB786 said:
Try both vol up+down+power together
Click to expand...
Click to collapse
No luck man it just reboots

It's redmi 6 pro thread.
Enddo said:
So all of you folks have already unlocked the bootloader of your Redmi Note 6 Pro and are using TWRP?
I tried unlocking mine on the 10th and was given a 30-day waiting lockout before I could unlock my bootloader
Click to expand...
Click to collapse

i hope someone make a android 9 rom.

Hi i can this recovery in MiA2 lite?

secoes90 said:
Hi i can this recovery in MiA2 lite?
Click to expand...
Click to collapse
Nope you have different thread for that.
https://forum.xda-developers.com/mi-a2-lite/development/official-twrp-daisy-t3855396

[recovery] [official] pitchblack recovery project [x01bd]

PITCH BLACK RECOVERY PROJECT
Asus Zenfone Max Pro M2 [X01BD]
[OFFICIAL]
Disclaimer
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed
If you point the finger at me for messing up your device, I will laugh at you. Hard. A lot
Instructions :
- Flash PBRP through TWRP
- Reboot and enjoy
OR
- Flash the recovery.img under TWRP folder in the PBRP zip by the fastboot command :
Code:
fastboot flash recovery recovery.img
Know more about PBRP : pbrp.ml
Credits :
@Reza_adi @Mohd_Faraz @firewolfxda @Manjot Sidhu
@Dees_Troy @Rk585
Downloads :
PBRP
updates will be pushed to sourceforge periodically, keep checking the download link:fingers-crossed:
​
XDA:DevDB Information
PBRP, Tool/Utility for the Asus Zenfone Max Pro M2
Contributors
#ArtFuL, legacy07
Source Code: https://github.com/legacy08/android_device_asus_X01BD-pbrp
Version Information
Status: Stable
Current Stable Version: PBRP 2.9.0
Stable Release Date: 2019-01-13
Created 2019-01-13
Last Updated 2020-03-28

This pbrp can backup?

does "official" tag make it automatic update when the new version of pbrp comes out?

This is seriously one of the best recovery I have ever come across... Better than TWRP. Thanks for maintaining this for our device...

nonovivix said:
This pbrp can backup?
Click to expand...
Click to collapse
who has ever tried a backup from PBRP. is it successful?

nonovivix said:
who has ever tried a backup from PBRP. is it successful?
Click to expand...
Click to collapse
I've tried it for data backup only not including the firmware..its working

how to flash it without twrp?

mrmcphisto77 said:
how to flash it without twrp?
Click to expand...
Click to collapse
Extract the recovery.img inside twrp folder of PBRP official zip
Use fastboot mode
Run "fastboot flash recovery recovery.img" in command line

sanpolac said:
does "official" tag make it automatic update when the new version of pbrp comes out?
Click to expand...
Click to collapse
No. New updates will be pushed to pbrp sourceforge. You have to download it from there

Hi.. I see new update i.e. 30 jan
Kindly provide changelog..

sachinm said:
Hi.. I see new update i.e. 30 jan
Kindly provide changelog..
Click to expand...
Click to collapse
Update Log :
- Migrated to new device tree
- dt2w Fixed
- mtp Fixed
- OTG support
- Minor bug fixes

#ArtFuL said:
Update Log :
- Migrated to new device tree
- dt2w Fixed
- mtp Fixed
- OTG support
- Minor bug fixes
Click to expand...
Click to collapse
Nice work

Shrp - perp - recovery for x01bd
Here are the links of other recoveries ported to X01BD.
These are experimental. Do at yourown risk!!!
- SHRP >> link
- PERP >> link

#ArtFuL said:
Here are the links of other recoveries ported to X01BD.
These are experimental. Do at your own risk!!!
- SHRP >> link
- PERP >> link
Click to expand...
Click to collapse
SHRP looks cool

X10MINISTER said:
Extract the recovery.img inside twrp folder of PBRP official zip
Use fastboot mode
Run "fastboot flash recovery recovery.img" in command line
Click to expand...
Click to collapse
sir it means that i will flash the img file from the PBRP zip in fastboot? am I right?
---------- Post added at 07:16 PM ---------- Previous post was at 07:06 PM ----------
can i use "boot" command instead of "flash" ? like this:
fastboot boot recovery recovery.img

kayamokid said:
sir it means that i will flash the img file from the PBRP zip in fastboot? am I right?
Click to expand...
Click to collapse
Yeah.the command are to flashing the recovery..
kayamokid said:
can i use "boot" command instead of "flash" ? like this:
fastboot boot recovery recovery.img
Click to expand...
Click to collapse
I think its doesn't work at all cause the command are to boot the device to recovery mode by using the recovery that absence on the devices
So, need to flash it first

X10MINISTER said:
Yeah.the command are to flashing the recovery..
I think its doesn't work at all cause the command are to boot the device to recovery mode by using the recovery that absence on the devices
So, need to flash it first
Click to expand...
Click to collapse
ok, so I need to flash this. but before I flash this, it is required to unlock my bootloader?

kayamokid said:
ok, so I need to flash this. but before I flash this, it is required to unlock my bootloader?
Click to expand...
Click to collapse
Ya..its need u to unlock bootloader first or the recovery flashing will failed

ok sir, thank you very much.
one last question sir, how to revert to stock recovery anf stock rom? just in case sir?

kayamokid said:
ok sir, thank you very much.
one last question sir, how to revert to stock recovery anf stock rom? just in case sir?
Click to expand...
Click to collapse
OK.no problem.
U can use this https://firmwarex.net/asus-zenfone-max-pro-m2-x01bd-zb630kl-zb631kl-official-firmware/
Extract the file first
Flash this by using fastboot mode
This will revert ur devices to stock ROM but its an old version..so u need to update to get the latest version