[Q] Micromax A74 Canvas Fun issue. Need Help ...! - Micromax A110

[Q][SOLVED] Micromax A74 Canvas Fun issue. Need Help ...!
Here's what happened.
I rooted my Micromax A74 & uninstalled some Google apps like search, maps, gmail etc. Everything worked fine.
Recently I did a hard reset. The phone booted & the setup wizard appeared. During the setup I get an error message, [Unfortunately, Setup Wizard has stopped]. I tried several times & got the same error message at some point. How can I fix this? Is there a way to skip the setup wizard?
I fear I may have uninstalled system apps. If this is the problem, how can I reinstall the stock rom? Need help ASAP.

panic guy said:
Here's what happened.
I rooted my Micromax A74 & uninstalled some Google apps like search, maps, gmail etc. Everything worked fine.
Recently I did a hard reset. The phone booted & the setup wizard appeared. During the setup I get an error message, [Unfortunately, Setup Wizard has stopped]. I tried several times & got the same error message at some point. How can I fix this? Is there a way to skip the setup wizard?
I fear I may have uninstalled system apps. If this is the problem, how can I reinstall the stock rom? Need help ASAP.
Click to expand...
Click to collapse
Download ur stock rom from here - https://docs.google.com/uc?id=0B6-h6iUVgfhJLTlUbl9YUG1vMHc
Flash it via sp flash tool

Sdk_Zone said:
Download ur stock rom from here
Flash it via sp flash tool
Click to expand...
Click to collapse
Can you please give me the step-by-step instructions? I'm new to android.
After some research online, I downloaded the stock rom for my phone & mini-sdk. Rebooted my phone into recovery mode and tried to apply update using ADB with this command
Code:
adb sideload <filename>
After the file is transferred I get an error message "Installation aborted." :crying:

Continued googling & found it. Fixed it using adb sideload. But I used a rom from a different source. The rom you mentioned gave me an error message. But anyway, thanks for the help Sdk_Zone.
:laugh:

Sure bro, download above linked file & extract it
U also need the driver installed in ur pc for ur device detection
Download sp flash tool.zip from net n extract it
Open sp flash tool
Now load the scatter file from rom folder & click on download button
Now switch of ur device & pull out battery
Connect ur device using USB cable without battery
Now it will detecting com port connection & progress will start after it
After all completion a green ring will appear
Now dis connect ur device
Put battery back & boot ur device
Enjoy
Hit thanks if I help u
Sent from my Nexus 4 using xda app-developers app

problem
yes there is a scatter file in firmware but it do not work in sptool why

Sdk_Zone said:
Sure bro, download above linked file & extract it
U also need the driver installed in ur pc for ur device detection
Download sp flash tool.zip from net n extract it
Open sp flash tool
Now load the scatter file from rom folder & click on download button
Now switch of ur device & pull out battery
Connect ur device using USB cable without battery
Now it will detecting com port connection & progress will start after it
After all completion a green ring will appear
Now dis connect ur device
Put battery back & boot ur device
Enjoy
Hit thanks if I help u
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
sir
Sp tool load Scatter file got this massage
Error : Initializing scatter file failed. Please check the name of scatter file which you load is legal.
how to flash my micromax A74 is dead
passable update.zip rom flash to dead mobile in sp flash tool ??

Related

How to put ICS on my LG device ( device not found) root

hello,
I've tried a few times to root my device but it doesn't.
i want to try this rom: [ROM][ICS][P920] First ICS 4.0.4 Full 3D ROM Ported From SU760
I also read the guide: [GUIDE] [TOOL] Rooting the "First ICS 4.0.4 Full 3D ROM Ported From SU760" but nothing work.....
I cant instal a zip from SD with rom manager because my device says your device is not rooted....
For rooting my device i used this tool: adb_restore_rooting-v1.2.zip but freezes.
It told me this:
pussing bussybox:
device not found..
i turned usb debuging on, bus nothing worked for me.
who want to help me?
ps: i am from the netherlands, sorry for the bad grammar
Thanks, Dylan
Hi
From my experience the same thing happened to me.my mistake was I did not extract the restore file I jus opened it in the zip folder.extract it to the same folder where you have your zip saved then it will pick up busy box.open rooting.bat from the extracted folder
Sent from my LG-SU760 using xda app-developers app
shaqfu786 said:
Hi
From my experience the same thing happened to me.my mistake was I did not extract the restore file I jus opened it in the zip folder.extract it to the same folder where you have your zip saved then it will pick up busy box.open rooting.bat from the extracted folder
Sent from my LG-SU760 using xda app-developers app
Click to expand...
Click to collapse
hi, i've try this, but it wont work...
it says always:
deomon is not running
deamon starting at port 5037.
deamon start succesfully
error: device not found.
i've try to connect with usb debugging,lg pcsuite en mass storge but nothing worked for me....
did you extract the whole rooting file or just the the rooting.bat.you must extract the whole folder if you did not.
LG-P920 dipped in AC!D
dylan-46 said:
hi, i've try this, but it wont work...
it says always:
deomon is not running
deamon starting at port 5037.
deamon start succesfully
error: device not found.
i've try to connect with usb debugging,lg pcsuite en mass storge but nothing worked for me....
Click to expand...
Click to collapse
when yo connect the cell do you hear a guiar sound and two icons apears one usb and a little bug??
because i have the same problem i just push the button to make a call,
now enter the number: 3845#*920# This will redirect you to the full hidden menu. Once there, you can go to the PORT SETTINGS menu and set it to AP USB thanks to member vicionastral
And if you want to upgrade with the LG software, you must set this to AP USB and make it stay. Then when you are upgrading, you must stay vigilant and press (and keep pressed) the volume up button in the moment it reboot the phone (or before it reboots, just to be sure)
This way, a white screen with red text "factory upload" will show and upgrades will have no problems.
(this mode normally only happens when you press the volume up button with the phone off, and then connect it to the usb port and there is an LG software commanding the phone via usb) thanks to member vicionastral
hope works for u
At first did you install lg drivers ?? Is your PC detect it ??
This happened to me . I used adb_restore-rooting v1.6 and it's work .
When you install ICS you install "lg drivers" as v1.1 right ??
I update the drivers to version v3.xx (from lg support tool) and it's works fine .
Sent From My P920 (ICS ported)
Hit Thanks Button If I Helped

Spice Mi-435 ( Rooting n Other Devlopment)

Hey Spice Mi-435 owners
here is the Thread For Spice mi-435
Rooting​
First Of All Download The Drivers From Here
and Enable the Usb Debbuging
dn Follow dis Procedure
1) Download the root with restore by bin4ry.zip from the link in the given here http://forum.xda-developers.com/show....php?t=1886460
2) Extract the contents of the zip
3) Connect your phone to the computer using the usb cable
4) Double click on runme.bat
5) select the option 1
6) Now wait for a while
7) You will be prompted to restore
8) Tap on restore
9) Now mobile will reboot twice
10) In the app drawer a super user icon will appear
:good:
reserved
Can u tell me how much its battery backup in heavy usage....
Sent from my Spice Mi-425 using xda app-developers app
I want to purchase this phone...Please somebody tell me another its backup and does this phone have a direct sim video call facility .Or we need any social app to video call.
Sent from my Spice Mi-425 using xda app-developers app
tried this out ended with trouble
i did the rooting the phone is rooted but the drivers are gone
whenever i m connecting my device computer pop-ups the message the device has stopped working
after reinstalling the driver from various sources even from spice website the drivers are not working gives me error
the resource that you are try to use on network location
attached the msg also
after clicking on browse for locating the msi file i located driver in program file also and driver folder also but did not sucssed pl tell me way to install driver
have tried out the pdanet + way also but result is same

[Q] need help for root micromaxx a27

actually guys i already know method how to root my phone but i am facing some kind of problem.
like.
1.when i connect my phone to computer and i click install drivers file automaticly it always take a process n then it say drivers can not be install
2. when i try manual drivers method-control panel-device manager-other devices there are 2 type of directries and both have mark of ! .
3.when i open unlockroot click in root it said you device is not connected..but my device already detect by moborobo.
4.i ask my 1 friend for help but he is saying to me drivers are preinstall in your mobile but my phone have not.so i download it aprox 8mb pakage in rar but its not working.
now tell me what i have to do ;(
FROM_HEAVEN said:
actually guys i already know method how to root my phone but i am facing some kind of problem.
like.
1.when i connect my phone to computer and i click install drivers file automaticly it always take a process n then it say drivers can not be install
2. when i try manual drivers method-control panel-device manager-other devices there are 2 type of directries and both have mark of ! .
3.when i open unlockroot click in root it said you device is not connected..but my device already detect by moborobo.
4.i ask my 1 friend for help but he is saying to me drivers are preinstall in your mobile but my phone have not.so i download it aprox 8mb pakage in rar but its not working.
now tell me what i have to do ;(
Click to expand...
Click to collapse
download adb and installed the adb usb drivers, that should do the trick. also it looks like its has android 2.3 gingerbread, you can try this Method instead if you can get the usb working. (download the link on the second post, its a apk so install it from your phone.
sorry
Trozzul said:
download adb and installed the adb usb drivers, that should do the trick. also it looks like its has android 2.3 gingerbread, you can try this Method instead if you can get the usb working. (download the link on the second post, its a apk so install it from your phone.
Click to expand...
Click to collapse
not working
help is here.......!~!
FROM_HEAVEN said:
actually guys i already know method how to root my phone but i am facing some kind of problem.
like.
1.when i connect my phone to computer and i click install drivers file automaticly it always take a process n then it say drivers can not be install
2. when i try manual drivers method-control panel-device manager-other devices there are 2 type of directries and both have mark of ! .
3.when i open unlockroot click in root it said you device is not connected..but my device already detect by moborobo.
4.i ask my 1 friend for help but he is saying to me drivers are preinstall in your mobile but my phone have not.so i download it aprox 8mb pakage in rar but its not working.
now tell me what i have to do ;(
Click to expand...
Click to collapse
hey i knw what u shud do looks like u cant install adb drivers........what u shud do instead is install adb drivers via PDAnet......its a software which will download adb drivers for u when i was new to rooting i cudnt install adb drivers myself so i used PDAnet......download PDAnet sotware I'm bound to post outside links n i dnt hav the link on xda so u can search it on google.......I hope it helps.................. n ohh please hit the thanks button afterwards......!~!
thanks
Alithe1 said:
hey i knw what u shud do looks like u cant install adb drivers........what u shud do instead is install adb drivers via PDAnet......its a software which will download adb drivers for u when i was new to rooting i cudnt install adb drivers myself so i used PDAnet......download PDAnet sotware I'm bound to post outside links n i dnt hav the link on xda so u can search it on google.......I hope it helps.................. n ohh please hit the thanks button afterwards......!~!
Click to expand...
Click to collapse
thanks bro finally i get a answer i will try it.
thanks again
Hit thnx
FROM_HEAVEN said:
thanks bro finally i get a answer i will try it.
thanks again
Click to expand...
Click to collapse
NO problem plzz hit the thanks button.........!~!

UNBRICK Gionee Pioneer P2 using the stock rom of Walton Primo F2

Hey guys! Have you run into trouble while using your brand new Gionee Pioneer P2? Have you deleted some system files and now apps are crashing all around you? Or have you somehow bricked your phone? Problem is the stock rom of P2 isn't available on the internet yet, nor are there any custom roms to bail you from this situation at this point. But all hope is not lost.
Enter the Walton Primo F2. It has identical hardware specs as the P2, except for a different primary camera. They look the same as well. Without any doubt they are manufactured by the same Chinese company and sold in different countries with different re-branding and minimal modifications. The stock rom of Primo F2 is 100% compatible with Pioneer P2. And since the installation method is an SP Tool flash, it works on bricked devices as well. All you need is a Pioneer P2 that you want to flash, a Windows PC and a micro-usb cable. Here's how you do the deed.
NOTE : since I am not allowed to post links yet, I'm putting them here in fragments. Please copy the url to your browser and remove the spaces.
First, download the Walton Primo F2 stock rom from HERE - http: // www .mediafire. com/ download/ terzpsp1k1jw8a2/ F2_firmware . rar
Now, unrar the archive. Once you are done with that, you have to install the usb driver in your computer so that your phone gets recognized even when it’s turned off and without a battery. And you must do so manually. So first, unzip the ‘USB VCOM Driver’ package inside the ‘Drivers’ folder. Now the installation. Here’s how you go about that.
In Windows, go to Control Panel and open Device Manager.
Click any of the device groups you see here.
From ‘Action Menu’, select ‘Add Legacy Hardware’
The ‘Add Hardware Wizard’ will open up. Click Next.
Select ‘Install the hardware that I manually select from a list (Advanced)’
Click Next 2 times, then click the ‘Have Disk’ button
Click Browse and find where the downloaded, unrar-ed firmware folder is. Go to Drivers > USB VCOM Driver > select the .inf file compatible with your Windows OS (XP, Vista or Win7, 32 bit or 64 bit)
Click Open and OK. The driver will be listed. Then click Next. The driver will finish installing.
Well, now that you’re done with the driver installation, time to flash your phone using SP Tools.
Go to ‘Flash Tools’ folder, unrar the SP_Flash_Tool_exe_v3.1312.0.139 package, click 3-4 times to go deep into it where there will be a collection of files, find the little blue ‘Flash_tool’ application file, double click on it to run. The interface will open up.
Click on ‘Download Agent’, browse to the same folder where you found the ‘Flash_tool’ application, and select MTK_AllinONne_DA.
Now click on scatter loading, browse to Software > Primo-F2_0301_T5159. Then select the text document called ‘MT6572_Android_scatter’.
Now click Firmware-> Upgrade and then connect the usb cable with moble while the battery is removed.
Now insert battery. It’ll star downloading. Hold your breath and wait.
After a few minutes it will show a pop up saying ‘Firmware Upgrade’ with a nice green circle. Now, you’re done. Next time you turn on your phone it will be running a shiny new rom, and work like a newly-bought phone!
Of course, don’t forget to do a factory reset first thing when you boot up your phone!
So that’s about it. If you have any doubts of troubles, ask them here. Good luck flashing!
P.S. This guide has been compiled from the instructions given here - http: // www .waltonforum. com/index.php?topic=3101.0 and here - http: // droidchina . com/forum/ Thread-How-to-install-MTK-USB-driver-manually-on-Windows . And of course it should go without saying that I’m not responsible for any possible damages your device incurs during this procedure. Flashing an Android rom is serious business so give it a good thought before deciding if you want to go ahead with it. Your device manufacturer warranty will be null and void the moment you go down this road. So if you feel brave enough, proceed.
Great
gioneerp2 said:
Hey guys! Have you run into trouble while using your brand new Gionee Pioneer P2? Have you deleted some system files and now apps are crashing all around you? Or have you somehow bricked your phone? Problem is the stock rom of P2 isn't available on the internet yet, nor are there any custom roms to bail you from this situation at this point. But all hope is not lost.
Enter the Walton Primo F2. It has identical hardware specs as the P2, except for a different primary camera. They look the same as well. Without any doubt they are manufactured by the same Chinese company and sold in different countries with different re-branding and minimal modifications. The stock rom of Primo F2 is 100% compatible with Pioneer P2. And since the installation method is an SP Tool flash, it works on bricked devices as well. All you need is a Pioneer P2 that you want to flash, a Windows PC and a micro-usb cable. Here's how you do the deed.
NOTE : since I am not allowed to post links yet, I'm putting them here in fragments. Please copy the url to your browser and remove the spaces.
First, download the Walton Primo F2 stock rom from HERE - http: // www .mediafire. com/ download/ terzpsp1k1jw8a2/ F2_firmware . rar
Now, unrar the archive. Once you are done with that, you have to install the usb driver in your computer so that your phone gets recognized even when it’s turned off and without a battery. And you must do so manually. So first, unzip the ‘USB VCOM Driver’ package inside the ‘Drivers’ folder. Now the installation. Here’s how you go about that.
In Windows, go to Control Panel and open Device Manager.
Click any of the device groups you see here.
From ‘Action Menu’, select ‘Add Legacy Hardware’
The ‘Add Hardware Wizard’ will open up. Click Next.
Select ‘Install the hardware that I manually select from a list (Advanced)’
Click Next 2 times, then click the ‘Have Disk’ button
Click Browse and find where the downloaded, unrar-ed firmware folder is. Go to Drivers > USB VCOM Driver > select the .inf file compatible with your Windows OS (XP, Vista or Win7, 32 bit or 64 bit)
Click Open and OK. The driver will be listed. Then click Next. The driver will finish installing.
Well, now that you’re done with the driver installation, time to flash your phone using SP Tools.
Go to ‘Flash Tools’ folder, unrar the SP_Flash_Tool_exe_v3.1312.0.139 package, click 3-4 times to go deep into it where there will be a collection of files, find the little blue ‘Flash_tool’ application file, double click on it to run. The interface will open up.
Click on ‘Download Agent’, browse to the same folder where you found the ‘Flash_tool’ application, and select MTK_AllinONne_DA.
Now click on scatter loading, browse to Software > Primo-F2_0301_T5159. Then select the text document called ‘MT6572_Android_scatter’.
Now click Firmware-> Upgrade and then connect the usb cable with moble while the battery is removed.
Now insert battery. It’ll star downloading. Hold your breath and wait.
After a few minutes it will show a pop up saying ‘Firmware Upgrade’ with a nice green circle. Now, you’re done. Next time you turn on your phone it will be running a shiny new rom, and work like a newly-bought phone!
Of course, don’t forget to do a factory reset first thing when you boot up your phone!
So that’s about it. If you have any doubts of troubles, ask them here. Good luck flashing!
P.S. This guide has been compiled from the instructions given here - http: // www .waltonforum. com/index.php?topic=3101.0 and here - http: // droidchina . com/forum/ Thread-How-to-install-MTK-USB-driver-manually-on-Windows . And of course it should go without saying that I’m not responsible for any possible damages your device incurs during this procedure. Flashing an Android rom is serious business so give it a good thought before deciding if you want to go ahead with it. Your device manufacturer warranty will be null and void the moment you go down this road. So if you feel brave enough, proceed.
Click to expand...
Click to collapse
thanks very much but Can you show me how to format the internal storage then create some new partitions and flash the rom into it ?
that would be awsome man
Thanks
gioneerp2 said:
Hey guys! Have you run into trouble while using your brand new Gionee Pioneer P2? Have you deleted some system files and now apps are crashing all around you? Or have you somehow bricked your phone? Problem is the stock rom of P2 isn't available on the internet yet, nor are there any custom roms to bail you from this situation at this point. But all hope is not lost.
Enter the Walton Primo F2. It has identical hardware specs as the P2, except for a different primary camera. They look the same as well. Without any doubt they are manufactured by the same Chinese company and sold in different countries with different re-branding and minimal modifications. The stock rom of Primo F2 is 100% compatible with Pioneer P2. And since the installation method is an SP Tool flash, it works on bricked devices as well. All you need is a Pioneer P2 that you want to flash, a Windows PC and a micro-usb cable. Here's how you do the deed.
NOTE : since I am not allowed to post links yet, I'm putting them here in fragments. Please copy the url to your browser and remove the spaces.
First, download the Walton Primo F2 stock rom from HERE - http: // www .mediafire. com/ download/ terzpsp1k1jw8a2/ F2_firmware . rar
Now, unrar the archive. Once you are done with that, you have to install the usb driver in your computer so that your phone gets recognized even when it’s turned off and without a battery. And you must do so manually. So first, unzip the ‘USB VCOM Driver’ package inside the ‘Drivers’ folder. Now the installation. Here’s how you go about that.
In Windows, go to Control Panel and open Device Manager.
Click any of the device groups you see here.
From ‘Action Menu’, select ‘Add Legacy Hardware’
The ‘Add Hardware Wizard’ will open up. Click Next.
Select ‘Install the hardware that I manually select from a list (Advanced)’
Click Next 2 times, then click the ‘Have Disk’ button
Click Browse and find where the downloaded, unrar-ed firmware folder is. Go to Drivers > USB VCOM Driver > select the .inf file compatible with your Windows OS (XP, Vista or Win7, 32 bit or 64 bit)
Click Open and OK. The driver will be listed. Then click Next. The driver will finish installing.
Well, now that you’re done with the driver installation, time to flash your phone using SP Tools.
Go to ‘Flash Tools’ folder, unrar the SP_Flash_Tool_exe_v3.1312.0.139 package, click 3-4 times to go deep into it where there will be a collection of files, find the little blue ‘Flash_tool’ application file, double click on it to run. The interface will open up.
Click on ‘Download Agent’, browse to the same folder where you found the ‘Flash_tool’ application, and select MTK_AllinONne_DA.
Now click on scatter loading, browse to Software > Primo-F2_0301_T5159. Then select the text document called ‘MT6572_Android_scatter’.
Now click Firmware-> Upgrade and then connect the usb cable with moble while the battery is removed.
Now insert battery. It’ll star downloading. Hold your breath and wait.
After a few minutes it will show a pop up saying ‘Firmware Upgrade’ with a nice green circle. Now, you’re done. Next time you turn on your phone it will be running a shiny new rom, and work like a newly-bought phone!
Of course, don’t forget to do a factory reset first thing when you boot up your phone!
So that’s about it. If you have any doubts of troubles, ask them here. Good luck flashing!
P.S. This guide has been compiled from the instructions given here - http: // www .waltonforum. com/index.php?topic=3101.0 and here - http: // droidchina . com/forum/ Thread-How-to-install-MTK-USB-driver-manually-on-Windows . And of course it should go without saying that I’m not responsible for any possible damages your device incurs during this procedure. Flashing an Android rom is serious business so give it a good thought before deciding if you want to go ahead with it. Your device manufacturer warranty will be null and void the moment you go down this road. So if you feel brave enough, proceed.
Click to expand...
Click to collapse
I hope this will solve the problem of NO SIM CARD DETECTED in my own GIONEE P2? but thanks. this looks helpful even though I have not tried it yet.
GREAT
helpful :good:
Did not fix no sim detected issues
gioneerp2 said:
Hey guys! Have you run into trouble while using your brand new Gionee Pioneer P2? Have you deleted some system files and now apps are crashing all around you? Or have you somehow bricked your phone? Problem is the stock rom of P2 isn't available on the internet yet, nor are there any custom roms to bail you from this situation at this point. But all hope is not lost.
Enter the Walton Primo F2. It has identical hardware specs as the P2, except for a different primary camera. They look the same as well. Without any doubt they are manufactured by the same Chinese company and sold in different countries with different re-branding and minimal modifications. The stock rom of Primo F2 is 100% compatible with Pioneer P2. And since the installation method is an SP Tool flash, it works on bricked devices as well. All you need is a Pioneer P2 that you want to flash, a Windows PC and a micro-usb cable. Here's how you do the deed.
NOTE : since I am not allowed to post links yet, I'm putting them here in fragments. Please copy the url to your browser and remove the spaces.
First, download the Walton Primo F2 stock rom from HERE - http: // www .mediafire. com/ download/ terzpsp1k1jw8a2/ F2_firmware . rar
Now, unrar the archive. Once you are done with that, you have to install the usb driver in your computer so that your phone gets recognized even when it’s turned off and without a battery. And you must do so manually. So first, unzip the ‘USB VCOM Driver’ package inside the ‘Drivers’ folder. Now the installation. Here’s how you go about that.
In Windows, go to Control Panel and open Device Manager.
Click any of the device groups you see here.
From ‘Action Menu’, select ‘Add Legacy Hardware’
The ‘Add Hardware Wizard’ will open up. Click Next.
Select ‘Install the hardware that I manually select from a list (Advanced)’
Click Next 2 times, then click the ‘Have Disk’ button
Click Browse and find where the downloaded, unrar-ed firmware folder is. Go to Drivers > USB VCOM Driver > select the .inf file compatible with your Windows OS (XP, Vista or Win7, 32 bit or 64 bit)
Click Open and OK. The driver will be listed. Then click Next. The driver will finish installing.
Well, now that you’re done with the driver installation, time to flash your phone using SP Tools.
Go to ‘Flash Tools’ folder, unrar the SP_Flash_Tool_exe_v3.1312.0.139 package, click 3-4 times to go deep into it where there will be a collection of files, find the little blue ‘Flash_tool’ application file, double click on it to run. The interface will open up.
Click on ‘Download Agent’, browse to the same folder where you found the ‘Flash_tool’ application, and select MTK_AllinONne_DA.
Now click on scatter loading, browse to Software > Primo-F2_0301_T5159. Then select the text document called ‘MT6572_Android_scatter’.
Now click Firmware-> Upgrade and then connect the usb cable with moble while the battery is removed.
Now insert battery. It’ll star downloading. Hold your breath and wait.
After a few minutes it will show a pop up saying ‘Firmware Upgrade’ with a nice green circle. Now, you’re done. Next time you turn on your phone it will be running a shiny new rom, and work like a newly-bought phone!
Of course, don’t forget to do a factory reset first thing when you boot up your phone!
So that’s about it. If you have any doubts of troubles, ask them here. Good luck flashing!
P.S. This guide has been compiled from the instructions given here - http: // www .waltonforum. com/index.php?topic=3101.0 and here - http: // droidchina . com/forum/ Thread-How-to-install-MTK-USB-driver-manually-on-Windows . And of course it should go without saying that I’m not responsible for any possible damages your device incurs during this procedure. Flashing an Android rom is serious business so give it a good thought before deciding if you want to go ahead with it. Your device manufacturer warranty will be null and void the moment you go down this road. So if you feel brave enough, proceed.
Click to expand...
Click to collapse
Thanks for this wonderful post. I did everything accordingly and it was successful but it did not fix the issue I am having with the phone which is NO SIM CARD DETECTED in both SIM 1 and 2. Please, any further help will be appreciated. Thanks
daves3ng said:
Thanks for this wonderful post. I did everything accordingly and it was successful but it did not fix the issue I am having with the phone which is NO SIM CARD DETECTED in both SIM 1 and 2. Please, any further help will be appreciated. Thanks
Click to expand...
Click to collapse
You sound like you had the problem before you flashed your phone with this rom, and the situation remained the same even after you ported this firmware to your phone. That, I'm afraid, is a clear indication of a hardware problem. Take your phone to an engineer as soon as you can. Your manufacturer warranty, unfortunately, is no longer valid, unless you have a way to restore your phone to the original stock rom.
Sim not detected still
gioneerp2 said:
You sound like you had the problem before you flashed your phone with this rom, and the situation remained the same even after you ported this firmware to your phone. That, I'm afraid, is a clear indication of a hardware problem. Take your phone to an engineer as soon as you can. Your manufacturer warranty, unfortunately, is no longer valid, unless you have a way to restore your phone to the original stock rom.
Click to expand...
Click to collapse
Yes, I did have the same problem before porting in this ROM but I thought this would help solve the issue but it did not. Even in the process, the internal partition of my phone was greatly changed which I am afraid may not allow me to gain warranty again even I tried to restore the default Gionee OS.
I noticed something in the files of the WALTON PRIMO which seems to be similar to that of the GIONEE which I backed up using MTK Droid tool. i am now wondering if it's possible for me to simply copy and replace some of the files especially the "boot.img" and the "recovery.img" so I can have GIONEE back and then I can return for warranty.
Also, is there any way for me to flash the radio ROM cos it seems as if the porting did not in any way touch the radio part of the phone at all which I suppose is why the SIM issue persisted; likewise the USB debugging automatically turn on anytime it is connected to a laptop, could this also have an effect and how can it be FULLY RESTORED to factory default setting?
Thanks in advance
daves3ng said:
Yes, I did have the same problem before porting in this ROM but I thought this would help solve the issue but it did not. Even in the process, the internal partition of my phone was greatly changed which I am afraid may not allow me to gain warranty again even I tried to restore the default Gionee OS.
I noticed something in the files of the WALTON PRIMO which seems to be similar to that of the GIONEE which I backed up using MTK Droid tool. i am now wondering if it's possible for me to simply copy and replace some of the files especially the "boot.img" and the "recovery.img" so I can have GIONEE back and then I can return for warranty.
Also, is there any way for me to flash the radio ROM cos it seems as if the porting did not in any way touch the radio part of the phone at all which I suppose is why the SIM issue persisted; likewise the USB debugging automatically turn on anytime it is connected to a laptop, could this also have an effect and how can it be FULLY RESTORED to factory default setting?
Thanks in advance
Click to expand...
Click to collapse
Copying and pasting parts of the OS is not advisable. It may leave the ROM fragmented and you don't want to add a shaky software on top of a potential hardware issue. If you have a full back up of the original Gionee P2 rom, fully restore it, flash it back to how it was, unroot it and you will have your warranty back. Otherwise you can still look for reputed experts who work independently in different shops or centres and they can fix the network hardware for an affordable fee. Good luck.
How do I flash it back from MTK droid backup?
gioneerp2 said:
Copying and pasting parts of the OS is not advisable. It may leave the ROM fragmented and you don't want to add a shaky software on top of a potential hardware issue. If you have a full back up of the original Gionee P2 rom, fully restore it, flash it back to how it was, unroot it and you will have your warranty back. Otherwise you can still look for reputed experts who work independently in different shops or centres and they can fix the network hardware for an affordable fee. Good luck.
Click to expand...
Click to collapse
Please can you give directions as to how I can flash back my ROM backup from MTK droid tool? I did a full backup of over 2Gig of the phone before the NO SIM issue started. Please any help will be greatly appreciated. Thanks
Plz give me gionee p2 stock theme apk.
Sent from my P2 using XDA Premium 4 mobile app
I can't extract
sumantafun said:
Plz give me gionee p2 stock theme apk.
Sent from my P2 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Hi, I have all files of the P2 but I have tried all zip applications I can lay my hands on like WinZip, WinRAR, 7zip and none of them is able to extract the system.img file for me to get anything out of it. Do you have any ideas how I can go about it?
Thanks
Thanks bro!
gioneerp2 said:
Hey guys! Have you run into trouble while using your brand new Gionee Pioneer P2? Have you deleted some system files and now apps are crashing all around you? Or have you somehow bricked your phone? Problem is the stock rom of P2 isn't available on the internet yet, nor are there any custom roms to bail you from this situation at this point. But all hope is not lost.
Enter the Walton Primo F2. It has identical hardware specs as the P2, except for a different primary camera. They look the same as well. Without any doubt they are manufactured by the same Chinese company and sold in different countries with different re-branding and minimal modifications. The stock rom of Primo F2 is 100% compatible with Pioneer P2. And since the installation method is an SP Tool flash, it works on bricked devices as well. All you need is a Pioneer P2 that you want to flash, a Windows PC and a micro-usb cable. Here's how you do the deed.
NOTE : since I am not allowed to post links yet, I'm putting them here in fragments. Please copy the url to your browser and remove the spaces.
First, download the Walton Primo F2 stock rom from HERE - http: // www .mediafire. com/ download/ terzpsp1k1jw8a2/ F2_firmware . rar
Now, unrar the archive. Once you are done with that, you have to install the usb driver in your computer so that your phone gets recognized even when it’s turned off and without a battery. And you must do so manually. So first, unzip the ‘USB VCOM Driver’ package inside the ‘Drivers’ folder. Now the installation. Here’s how you go about that.
In Windows, go to Control Panel and open Device Manager.
Click any of the device groups you see here.
From ‘Action Menu’, select ‘Add Legacy Hardware’
The ‘Add Hardware Wizard’ will open up. Click Next.
Select ‘Install the hardware that I manually select from a list (Advanced)’
Click Next 2 times, then click the ‘Have Disk’ button
Click Browse and find where the downloaded, unrar-ed firmware folder is. Go to Drivers > USB VCOM Driver > select the .inf file compatible with your Windows OS (XP, Vista or Win7, 32 bit or 64 bit)
Click Open and OK. The driver will be listed. Then click Next. The driver will finish installing.
Well, now that you’re done with the driver installation, time to flash your phone using SP Tools.
Go to ‘Flash Tools’ folder, unrar the SP_Flash_Tool_exe_v3.1312.0.139 package, click 3-4 times to go deep into it where there will be a collection of files, find the little blue ‘Flash_tool’ application file, double click on it to run. The interface will open up.
Click on ‘Download Agent’, browse to the same folder where you found the ‘Flash_tool’ application, and select MTK_AllinONne_DA.
Now click on scatter loading, browse to Software > Primo-F2_0301_T5159. Then select the text document called ‘MT6572_Android_scatter’.
Now click Firmware-> Upgrade and then connect the usb cable with moble while the battery is removed.
Now insert battery. It’ll star downloading. Hold your breath and wait.
After a few minutes it will show a pop up saying ‘Firmware Upgrade’ with a nice green circle. Now, you’re done. Next time you turn on your phone it will be running a shiny new rom, and work like a newly-bought phone!
Of course, don’t forget to do a factory reset first thing when you boot up your phone!
So that’s about it. If you have any doubts of troubles, ask them here. Good luck flashing!
P.S. This guide has been compiled from the instructions given here - http: // www .waltonforum. com/index.php?topic=3101.0 and here - http: // droidchina . com/forum/ Thread-How-to-install-MTK-USB-driver-manually-on-Windows . And of course it should go without saying that I’m not responsible for any possible damages your device incurs during this procedure. Flashing an Android rom is serious business so give it a good thought before deciding if you want to go ahead with it. Your device manufacturer warranty will be null and void the moment you go down this road. So if you feel brave enough, proceed.
Click to expand...
Click to collapse
Thanks for the guide man! Helped me a lot! Now my phone's unbricked, and works fine.
m stuck
gioneerp2 said:
Hey guys! Have you run into trouble while using your brand new Gionee Pioneer P2? Have you deleted some system files and now apps are crashing all around you? Or have you somehow bricked your phone? Problem is the stock rom of P2 isn't available on the internet yet, nor are there any custom roms to bail you from this situation at this point. But all hope is not lost.
Enter the Walton Primo F2. It has identical hardware specs as the P2, except for a different primary camera. They look the same as well. Without any doubt they are manufactured by the same Chinese company and sold in different countries with different re-branding and minimal modifications. The stock rom of Primo F2 is 100% compatible with Pioneer P2. And since the installation method is an SP Tool flash, it works on bricked devices as well. All you need is a Pioneer P2 that you want to flash, a Windows PC and a micro-usb cable. Here's how you do the deed.
NOTE : since I am not allowed to post links yet, I'm putting them here in fragments. Please copy the url to your browser and remove the spaces.
First, download the Walton Primo F2 stock rom from HERE - http: // www .mediafire. com/ download/ terzpsp1k1jw8a2/ F2_firmware . rar
Now, unrar the archive. Once you are done with that, you have to install the usb driver in your computer so that your phone gets recognized even when it’s turned off and without a battery. And you must do so manually. So first, unzip the ‘USB VCOM Driver’ package inside the ‘Drivers’ folder. Now the installation. Here’s how you go about that.
In Windows, go to Control Panel and open Device Manager.
Click any of the device groups you see here.
From ‘Action Menu’, select ‘Add Legacy Hardware’
The ‘Add Hardware Wizard’ will open up. Click Next.
Select ‘Install the hardware that I manually select from a list (Advanced)’
Click Next 2 times, then click the ‘Have Disk’ button
Click Browse and find where the downloaded, unrar-ed firmware folder is. Go to Drivers > USB VCOM Driver > select the .inf file compatible with your Windows OS (XP, Vista or Win7, 32 bit or 64 bit)
Click Open and OK. The driver will be listed. Then click Next. The driver will finish installing.
Well, now that you’re done with the driver installation, time to flash your phone using SP Tools.
Go to ‘Flash Tools’ folder, unrar the SP_Flash_Tool_exe_v3.1312.0.139 package, click 3-4 times to go deep into it where there will be a collection of files, find the little blue ‘Flash_tool’ application file, double click on it to run. The interface will open up.
Click on ‘Download Agent’, browse to the same folder where you found the ‘Flash_tool’ application, and select MTK_AllinONne_DA.
Now click on scatter loading, browse to Software > Primo-F2_0301_T5159. Then select the text document called ‘MT6572_Android_scatter’.
Now click Firmware-> Upgrade and then connect the usb cable with moble while the battery is removed.
Now insert battery. It’ll star downloading. Hold your breath and wait.
After a few minutes it will show a pop up saying ‘Firmware Upgrade’ with a nice green circle. Now, you’re done. Next time you turn on your phone it will be running a shiny new rom, and work like a newly-bought phone!
Of course, don’t forget to do a factory reset first thing when you boot up your phone!
So that’s about it. If you have any doubts of troubles, ask them here. Good luck flashing!
P.S. This guide has been compiled from the instructions given here - http: // www .waltonforum. com/index.php?topic=3101.0 and here - http: // droidchina . com/forum/ Thread-How-to-install-MTK-USB-driver-manually-on-Windows . And of course it should go without saying that I’m not responsible for any possible damages your device incurs during this procedure. Flashing an Android rom is serious business so give it a good thought before deciding if you want to go ahead with it. Your device manufacturer warranty will be null and void the moment you go down this road. So if you feel brave enough, proceed.
Click to expand...
Click to collapse
pls bro i beg you in the name of god,how do i flash this rom using cwm recovery? my phone got bricked accidentally when using iphont and now it stuck at the boot logo. and i also did a factory reset when trying to install gionee p2 stock rom that i got from the net which happen to make use of sp flash tool,pls bro what do i do from here?...
:crying:
akandroid said:
Thanks for the guide man! Helped me a lot! Now my phone's unbricked, and works fine.
Click to expand...
Click to collapse
pls,how did you install mtk drivers on your pc,i tried that mine keep showing error this device cannot start (code 10)
using a custom rom of walton primo f2 on gionee p2
plz help me.. I have successfully unbrick my gionee p2 with the walton primo f2.. I have installed a custom rom of walton primo F2.. but it is not working.. my phone is not booting.. it shows walton's logo.. but after that phone doesn't start.. plz help me..
naman.dubey said:
plz help me.. I have successfully unbrick my gionee p2 with the walton primo f2.. I have installed a custom rom of walton primo F2.. but it is not working.. my phone is not booting.. it shows walton's logo.. but after that phone doesn't start.. plz help me..
Click to expand...
Click to collapse
Hey man, since you already unbricked your phone, you must be having the drivers installed. So, based on that assumption, all you gotta do is:
Open sp flash tools and repeat the process of selecting the 'Download Agent' and the 'Scatter loading File'.
Keep your phone's battery removed.
Now select 'Firmware Upgrade' option in the SP flash tools.
Connect your phone to your computer (with the battery removed).
SP Flash tools will start the updating/flashing process on your phone.
Insert the battery and wait a few minutes.
You should see a green circle appear in a window.
Then remove the battery, re-insert it and switch on your phone.
You're back to the Stock Wlalton-Primo OS
(Refer my guide on akandroiddevs.blogspot.com if you wanna root your phone)
Hope this helps.
---------- Post added at 09:45 AM ---------- Previous post was at 09:24 AM ----------
Mckandre said:
pls,how did you install mtk drivers on your pc,i tried that mine keep showing error this device cannot start (code 10)
Click to expand...
Click to collapse
Hey man, The ''Code 10 Error'' is caused mainly because your drivers are either not installed properly or they're corrupted. So wht you gotta do is:
1.Uninstall the drivers of your previous phone
2.Uninstall previously installed drivers of your Gionee P2
3.Restart Your Computer.
Then as for installing the MTK Drivers follow the given on the main post itself, i.e.
http://forum.xda-developers.com/showthread.php?t=2512804
Hope this helps.
i need guide to unbrick tecno p5
please can any person help me with procedure to unbrick my tecno p5, i install a chainfire 3d then the phone brick it always shows blank it cant even boot into recovery mode so as to do restore and i tries the walton f2 firmware to flash via sp flash tools but thesame problems persist please i need ur help developers
Will SP Flash Tool Return My Device To Stock Recovery?
akandroid said:
Hey man, since you already unbricked your phone, you must be having the drivers installed. So, based on that assumption, all you gotta do is:
Open sp flash tools and repeat the process of selecting the 'Download Agent' and the 'Scatter loading File'.
Keep your phone's battery removed.
Now select 'Firmware Upgrade' option in the SP flash tools.
Connect your phone to your computer (with the battery removed).
SP Flash tools will start the updating/flashing process on your phone.
Insert the battery and wait a few minutes.
You should see a green circle appear in a window.
Then remove the battery, re-insert it and switch on your phone.
You're back to the Stock Wlalton-Primo OS
(Refer my guide on akandroiddevs.blogspot.com if you wanna root your phone)
Hope this helps.
---------- Post added at 09:45 AM ---------- Previous post was at 09:24 AM ----------
Hey man, The ''Code 10 Error'' is caused mainly because your drivers are either not installed properly or they're corrupted. So wht you gotta do is:
1.Uninstall the drivers of your previous phone
2.Uninstall previously installed drivers of your Gionee P2
3.Restart Your Computer.
Then as for installing the MTK Drivers follow the given on the main post itself, i.e.
http://forum.xda-developers.com/showthread.php?t=2512804
Hope this helps.
Click to expand...
Click to collapse
Just wanted to ask that does this tool flash the recovery as well? Or just the stock rom? In case i would want to return to stock recovery from CWM, will SP Flash Tool help?
"NO SIM DETECTED" resolved
Thanks all. I tried everything on my Gionee P2 but still showing no sim detected. The issue was resolved after taking it back to Gionee workshop where it was reloaded or whatever was done and all issues resolved. The phone is now back to normal and that done within a space of an hour or so.
---------- Post added at 08:28 AM ---------- Previous post was at 08:25 AM ----------
bidsar.k said:
Just wanted to ask that does this tool flash the recovery as well? Or just the stock rom? In case i would want to return to stock recovery from CWM, will SP Flash Tool help?
Click to expand...
Click to collapse
yes I guess so. SP flash should flash the recovery rom with little modifications made. I am not a pro yet but I believe it can.
daves3ng said:
Thanks all. I tried everything on my Gionee P2 but still showing no sim detected. The issue was resolved after taking it back to Gionee workshop where it was reloaded or whatever was done and all issues resolved. The phone is now back to normal and that done within a space of an hour or so.
---------- Post added at 08:28 AM ---------- Previous post was at 08:25 AM ----------
yes I guess so. SP flash should flash the recovery rom with little modifications made. I am not a pro yet but I believe it can.
Click to expand...
Click to collapse
Hey daves3ng, thanks for the reply.
Are you talking about the recovery ROM or the stock RECOVERY? You are talking about flashing the recovery rom whereas i am asking about the stock recovery.
I am still confused about whether SP Flash could bring back the stock recovery on flashing or not. I own the P2 and i just want to flash a custom recovery (CWM, COT or CTR) followed by some nice roms which are available here.
The only thing i am worried about is that in case an issue arises and i have to flash the stock rom using SP Flash Tools, will i get the stock recovery back as well, or not.

[Q] V967S baseband Unkown , no imei

Hi ,
After backing up my ZTE V967S imei with mobile uncle i flashed lewa os unfortunately i have lost my imei and baseband and i cant restore the backup , im assuming this is because the efs folder was overwritten and may need to be reformatted, replacing the rom with the stock rom didn't resolve this issue . To compound issue i cant connect to pc at all, i installed all drivers and nothing . So what i think i need is a rom that will repartition the efs from the sd card or some zip file that could rewrite the baseband , any ideas would be helpful.
Kind regards
Jim
jimennis said:
Hi ,
After backing up my ZTE V967S imei with mobile uncle i flashed lewa os unfortunately i have lost my imei and baseband and i cant restore the backup , im assuming this is because the efs folder was overwritten and may need to be reformatted, replacing the rom with the stock rom didn't resolve this issue . To compound issue i cant connect to pc at all, i installed all drivers and nothing . So what i think i need is a rom that will repartition the efs from the sd card or some zip file that could rewrite the baseband , any ideas would be helpful.
Kind regards
Jim
Click to expand...
Click to collapse
I have managed to locate a spfalshtool backup of another V967S but as i said the phone will not connect to PC here is the list of files in the backup ,boot.img,EBR1,EB2,expdb,logo.bin,mbr,misc,mt6589 android scatter emmc.txt,pmt,pro info,protect f,protect s,recovery.img,rom ver2.txt,seccfg,secro.img,system.img,uboot.bin . can the be flased to phone without pc ?
Hope you can help
Hi All , i have manged to resove the issue and will post a tutorial shortly
jimennis said:
I have managed to locate a spfalshtool backup of another V967S but as i said the phone will not connect to PC here is the list of files in the backup ,boot.img,EBR1,EB2,expdb,logo.bin,mbr,misc,mt6589 android scatter emmc.txt,pmt,pro info,protect f,protect s,recovery.img,rom ver2.txt,seccfg,secro.img,system.img,uboot.bin . can the be flased to phone without pc ?
Hope you can help
Hi All , i have manged to resove the issue and will post a tutorial shortly
Click to expand...
Click to collapse
OK , files needed are spflash_tool.exe , full backup and MTK usb Vcom driver .
Take out phone battery and attach to pc , i used win 7 , hold the volume down and power button and phone should appear in device manager as unknown device install the driver manually and phone will show up as MTK Port in device manager , it may disconnect and reconnect but do not worry , unplug the phone ,open spflash_tool and load the scatter file(contact me for full backup files) select all files including the preloader and choose auto format now reconnect the phone with battery in and hold down volume and power button as soon as you hear it connect hit download and it will format and flash the stock rom to the file when done just restart your phone and your imei will be back

Categories

Resources