[Q] HELP! screen stuck after flash a rom. please help me :( - Moto G Q&A, Help & Troubleshooting

hi I unlocked bootloader and then I flash TWRP 2.6.3.3 falcon Img and try to Install ehndroix rom
but I got FAILED In the recovery mode and now my screen wont turn on stuck on the white screen WARNING BOOTLOADER UNLOCKED.
how do I Install stock rom or any other rom from now on? my moto g wont start
please help
thanks In advance.

try this http://forum.xda-developers.com/showthread.php?t=2646404 u gonna lose root ,the tutorial is inside the post

ANTRIK said:
hi I unlocked bootloader and then I flash TWRP 2.6.3.3 falcon Img and try to Install ehndroix rom
but I got FAILED In the recovery mode and now my screen wont turn on stuck on the white screen WARNING BOOTLOADER UNLOCKED.
how do I Install stock rom or any other rom from now on? my moto g wont start
please help
thanks In advance.
Click to expand...
Click to collapse
What bootloader do you have? 4.3 or 4.4?
I have a MotoG BoostMobile, and TWRP 2.6.3.3 would work only on 4.3, with 4.4 it freezes.
Make sure you go back to 4.3 bootloader and install, CMW 6.0.4.7. TWRP has touch issues..
Good luck!

hey mate no how I go to 4.3?? there Is no os In the phone

ANTRIK said:
hey mate no how I go to 4.3?? there Is no os In the phone
Click to expand...
Click to collapse
Get those 3 files, and rename mfastboot.zip to mfastboot.exe
Then set the phone to Download mode and in a command prompt (same dir as the 2 files) type: mfastboot flash motoboot motoboot.img
Be sure to use only mfastboot and not fastboot. This will flash the Android 4.3 bootloader.
Then use fastboot to install CWM: fastboot flash recovery recovery-clockwork-6.0.4.7-falcon.img
Reboot into recovery, and you should be able to use adb push or adb sideload to load a ROM of your choice (Preferably the latest CM11).
Good luck!
********** UPDATE ***************
I just tested CWM 6.0.4.7 and it does work with the 4.4 Bootloader!
So I don't think you need to revert to 4.3 bootloader if you are on 4.4 already!

Related

Need Help for HTC J butterfly!!!!!

I am using HTC J buttery*japan version
i have flash the custom recovery with twrp-htc-dlxj.img and TWport and it work
but i just want to recovery back to the japan version firmware
and i flash the RUU with
fastboot flash zip RUU.zip
after i flash it,i cant boot the recovery(even if i reflash the custom recovery),it keep restart!!
and i cannot boot into system.......just keep restart!!
help pls~~
try this
naruto02514 said:
I am using HTC J buttery*japan version
i have flash the custom recovery with twrp-htc-dlxj.img and TWport and it work
but i just want to recovery back to the japan version firmware
and i flash the RUU with
fastboot flash zip RUU.zip
after i flash it,i cant boot the recovery(even if i reflash the custom recovery),it keep restart!!
and i cannot boot into system.......just keep restart!!
help pls~~
Click to expand...
Click to collapse
Try to flash your custom recovery (Fastboot flash recovery recovery.img ) From fastboot of curse and then "fastboot oem lock" on CMD of curse.
and then try to flash your RUU again.
(I'ts will delete your Root and will back you to Stock ROM).
naruto02514 said:
I am using HTC J buttery*japan version
i have flash the custom recovery with twrp-htc-dlxj.img and TWport and it work
but i just want to recovery back to the japan version firmware
and i flash the RUU with
fastboot flash zip RUU.zip
after i flash it,i cant boot the recovery(even if i reflash the custom recovery),it keep restart!!
and i cannot boot into system.......just keep restart!!
help pls~~
Click to expand...
Click to collapse
after you flash custom recovery you need erase cache
With comand line
fastboot flash recovery recovery name.img
fastboot erase cache
You flash new rom/stock rom always have to flash the boot.img
if not flash boot.img of the rom you get the stripes on the screen or logo htc freeze
help me pls
i too have the same problem how can i fix ti???
did the above solution helped???

[Q] Cannot flash any custom recovery on Moto G XT1033

Yesterday I unlocked my bootloader on Moto G XT1033.After that I tried to flash CWM using mfastboot but after booting to recovery I get black screen with white/multi-colored lines and its gets stuck there.
However,I can still boot to my stock rom (Android 4.4.4) successfully.
I also tried flashing TWRP and Philz but i get the same problem everytime.Please help..
modifan14 said:
Yesterday I unlocked my bootloader on Moto G XT1033.After that I tried to flash CWM using mfastboot but after booting to recovery I get black screen with white/multi-colored lines and its gets stuck there.
However,I can still boot to my stock rom (Android 4.4.4) successfully.
I also tried flashing TWRP and Philz but i get the same problem everytime.Please help..
Click to expand...
Click to collapse
try using regular fastboot from the android sdk platform tools
and the latest TWRP build
and use this command
Code:
fastboot flash recovery openrecovery-twrp-2.8.1.0-xt1032.img
or
Code:
fastboot boot openrecovery-twrp-2.8.1.0-xt1032.img
make sure to the recovery img file in the same folder where fastboot and adb files are
AgentChaos said:
try using regular fastboot from the android sdk platform tools
Code:
fastboot boot openrecovery-twrp-2.8.1.0-xt1032.img
make sure to the recovery img file in the same folder where fastboot and adb files are
Click to expand...
Click to collapse
Thanks. The above command worked perfectly.

recovery access problem after unlock bootloader

hi
i updated official official ROM for HUAWEI G6-U10
then unlocked bootloader now when want go to recovery (or custom recovery ) it stops at FASTBOOT screen
PLEASE HELP ME
Amirhiden said:
hi
i updated official official ROM for HUAWEI G6-U10
then unlocked bootloader now when want go to recovery (or custom recovery ) it stops at FASTBOOT screen
PLEASE HELP ME
Click to expand...
Click to collapse
You should flash a recovery image via fastboot
fastboot flash recovery recovery.img
You can download the recovery here:
Original recovery G6-U10: https ://yadi.sk/d/JuFEUFrzeKzUE
TWRP G6-U10: https ://yadi.sk/d/N1iJk-vveL38n
CWM G6-U10: https ://yadi.sk/d/ZYoOe0z0eL2yr

Fastboot boot twrp

HTC One e8 eu mec_ul emea Android 5.0.2 my question work fastboot boot twrp.img ?
Not flash
snoopyhaeckers said:
HTC One e8 eu mec_ul emea Android 5.0.2 my question work fastboot boot twrp.img ?
Not flash
Click to expand...
Click to collapse
i think it should be fastboot boot recovery twrp.img
check it....
greg
fastboot flash recovery twrp.img
I want it not flash but only boot into TWRP to create a clean backup
snoopyhaeckers said:
I want it not flash but only boot into TWRP to create a clean backup
Click to expand...
Click to collapse
adb reboot recovery
mobione said:
adb reboot recovery
Click to expand...
Click to collapse
no ,,, he is talking about rebooting TEMPORARILY into TWRP recovery, although stock recovery is installed...
You can do that,,, i forgot the command but i think it is what i wrote...
@op -- DId you try both the commands that we gave you ??? Try mine first...
EDIT :: I'm correct -- check this link http://forum.xda-developers.com/showthread.php?t=2415668
But after Android 4.4 it should only be fastboot boot twrp.img
Check the link, its mentioned in the fastboot section
Cheers
Thanks i will test it
i'm stuck
i'd twrp custom recovery but i changed to stock recovery for ota update & it did worked but now after ota update install its now not booting up now i m stuck on powering up page & nothing is happening what should i do.

CWM no command

Hey there guys. I have recently flashed CWM-touch-6.0.4.7-falcon.img im able to go into recovery when i flash it, on reboot i selected yes for the fix install stock recovery, when back to recovery and it has an android with an exclamation mark coming out of it with it saying 'no command' at the bottom. How do i fix this? Moto G 3G 1st gen
You can try:
Code:
fastboot erase recovery
And then:
Code:
fastboot flash recovery recoveryname.img
After you flash the custom recovery boot into it right away and see if that works.
.:Dark:. said:
You can try:
Code:
fastboot erase recovery
And then:
Code:
fastboot flash recovery recoveryname.img
After you flash the custom recovery boot into it right away and see if that works.
Click to expand...
Click to collapse
I did that and it was all success but same thing happened
Also i tried flashing stock recovery but still no luck
An Android with an exclamation with 'no command' means you are on the stock recovery. Did you try the latest TWRP?
legolas06 said:
An Android with an exclamation with 'no command' means you are on the stock recovery. Did you try the latest TWRP?
Click to expand...
Click to collapse
Oh right ok. No i haven't used TWRP, i don't really like it. I tried CWM touch but i haven't tried normal CWM yet
You can also try philz recovery. Not sure why it won't stick after you flash but be sure go into recovery right after you finish flashing otherwise it will overwrite back to stock I believe.
.:Dark:. said:
You can also try philz recovery. Not sure why it won't stick after you flash but be sure go into recovery right after you finish flashing otherwise it will overwrite back to stock I believe.
Click to expand...
Click to collapse
I always go straight into recovery after i flash it but when i reboot it goes back to stock recovery :/
What message do you get after flashing the recovery? Previously I got 'partition size mismatch' indicating I flashed a recovery different from stock. Philz & TWRP worked fine for me.
legolas06 said:
What message do you get after flashing the recovery? Previously I got 'partition size mismatch' indicating I flashed a recovery different from stock. Philz & TWRP worked fine for me.
Click to expand...
Click to collapse
I forget, ill check it tomorrow as today i am a bit busy
I get a mismatch partition size (recovery) when i flash. I boot straight away to recovery, then say yes to disable flash stock recovery, reboot into recovery and stock recovery. I flashed the non touch CWM this time
bublz654 said:
I get a mismatch partition size (recovery) when i flash. I boot straight away to recovery, then say yes to disable flash stock recovery, reboot into recovery and stock recovery. I flashed the non touch CWM this time
Click to expand...
Click to collapse
Then sorry I'm not sure about the reason. May be you downloaded a wrong recovery or that recovery doesn't work with your bootloader. Just search the thread you downloaded this from to find any solution. Or if you don't like the TWRP try Philz touch as it is CWM based.
http://forum.xda-developers.com/showthread.php?t=2639583 .
Currently the only supported recovery for moto g is TWRP by h2o64.
legolas06 said:
Then sorry I'm not sure about the reason. May be you downloaded a wrong recovery or that recovery doesn't work with your bootloader. Just search the thread you downloaded this from to find any solution. Or if you don't like the TWRP try Philz touch as it is CWM based.
http://forum.xda-developers.com/showthread.php?t=2639583 .
Currently the only supported recovery for moto g is TWRP by h2o64.
Click to expand...
Click to collapse
I have flashed CWM-touch and normal CWM before until flashify came along and made my recovery screwed up
I suggest you try using mfastboot included here: https://www.androidfilehost.com/?fid=23578570567719065
NOTE: mfastboot erase recovery is not required. Simply use: mfastboot flash recovery recovery.img
lost101 said:
I suggest you try using mfastboot included here: https://www.androidfilehost.com/?fid=23578570567719065
NOTE: mfastboot erase recovery is not required. Simply use: mfastboot flash recovery recovery.img
Click to expand...
Click to collapse
I just tried that and still the same issue occurs
bublz654 said:
I just tried that and still the same issue occurs
Click to expand...
Click to collapse
Could you try the latest TWRP just to rule out a bad recovery.img: http://forum.xda-developers.com/moto-g/development/recovery-twrp-2-8-2-0-touch-recovery-t2980621
lost101 said:
Could you try the latest TWRP just to rule out a bad recovery.img: http://forum.xda-developers.com/moto-g/development/recovery-twrp-2-8-2-0-touch-recovery-t2980621
Click to expand...
Click to collapse
I'll try the philz recovery first as Im not a real big fan of twrp lol
lost101 said:
Could you try the latest TWRP just to rule out a bad recovery.img: http://forum.xda-developers.com/moto-g/development/recovery-twrp-2-8-2-0-touch-recovery-t2980621
Click to expand...
Click to collapse
I flashed philz recovery. Rebooted again and went into recovery and it worked, the recovery was still there
But one more thing on reboot of recovery it didn't ask if i wanted to fix root. Am i rooted already or not? :/
Are you on stock or a custom rom? Certain custom roms may have built in root access for everything else you will have to flash SuperSU.
Glad to see you got the recovery issue sorted. I'm with you I don't particularly like TWRP so I pretty much use Philz exclusively.

Categories

Resources