Database Info

need advice how to patch up my physically damaged M7

Alright, I did send sms on my bicycle which resulted in I did drop the phone on the ground. Luckily I had ad NILLKIN glass screen protector, which did save most of the phone . I have ordered a new Nillkin screen protector from Aliexpress. And I hope to patch up this phone so it looks good again. How would you have done ?
As you can see at the bottom in the pictures there is physically damage, you can you see the screen bleeding thru also the huwawei logo is damaged.
My idea is UNDER the NEW Nillkin screen protector I will try to mask these "holes" so the screen is not beelding thru anymore. What material should I use to patch up these holes.. also.. how to repar the logo ? can I print it out on my computer printer ? it might look **** on paper but UNDER the glass protector it might look a lot better.
All creative ideas are appreciated, I have high hopes the phone will look good again..
And hopefully my phone will surrive until the M8 release.
Just to let you know desipite the glass look damaged like this the phone is still fully functional!!

ouch i can feel with you.
How about some black film, black paper or everything else that is black and thin

Yes some black material for sure.. Black film would be perfect in guess.. Just wonder where to get it also some black glue at the sides also..

Maybe you can find a front replacement? - http://www.ebay.com/itm/New-Front-O...-Parts-For-Huawei-Ascend-Mate-7-/201270995814
http://www.ebay.com/itm/Original-Re...s-Lens-For-Huawei-Ascend-Mate-7-/141549809429
Don't put a huawei printed logo there lol it will look bad and cheap.

alexre123 said:
Maybe you can find a front replacement? - http://www.ebay.com/itm/New-Front-O...-Parts-For-Huawei-Ascend-Mate-7-/201270995814
http://www.ebay.com/itm/Original-Re...s-Lens-For-Huawei-Ascend-Mate-7-/141549809429
Don't put a huawei printed logo there lol it will look bad and cheap.
Click to expand...
Click to collapse
Nice man might be a very good alternative! But how easy is it to change it really?
Do I need a heat gun for that?

Don't know. I don't advise to do it yourself , just go with the phone to any service, I'm sure they know how to do the operation. Or maybe you have an huawei service near you.
Or...if you have the courage go for it ) - https://www.youtube.com/watch?v=nDiaQOzCvfE & https://www.youtube.com/watch?v=lUl8dCuhBGw
Joke man, don't do it yourself if you don't have experience

alexre123 said:
Don't know. I don't advise to do it yourself , just go with the phone to any service, I'm sure they know how to do the operation. Or maybe you have an huawei service near you.
Click to expand...
Click to collapse
I have done some smartphone repair myself, I changed the USB board on my old Galaxy Note 1.
I bought a smartphone repair kit with a few tools and very small screwdrivers. To change the glass is probably not much harder, but I need to know if I need a heat gun since I do not own any yet Hopefully it is not needed..but I would assume so...

I might also add the reason I bought a screen protector was that the original glass underneeth have a small crack too that goes accross the entire screen but it s quite invisible besides from certain angels.. so to change that screen to would actually be amazing..and it would make the secondary value when I sell this when M8 is released be a lot higher..

I think you need one. Look at the second yt movie at 22:34. Have an hair dryer?
https://meta.ifixit.com/Answers/View/3523/Using+a+hairdryer+instead+of+a+heat+gun
Hair Dryer vs Heat Gun
https://www.youtube.com/watch?v=9ELHDYjpLoc
If I was me I would go with the phone to a service. Anyway good to know Nilkin tempered glass do the job, I have one also on my screen

alexre123 said:
I think you need one. Look at the second yt movie at 22:34. Have an hair dryer?
https://meta.ifixit.com/Answers/View/3523/Using+a+hairdryer+instead+of+a+heat+gun
Hair Dryer vs Heat Gun
https://www.youtube.com/watch?v=9ELHDYjpLoc
If I was me I would go with the phone to a service. Anyway good to know Nilkin tempered glass do the job, I have one also on my screen
Click to expand...
Click to collapse
Yes the Nillkin glass did its job but I think I was unlucky, that the bottom of the phone got under my bicycle tire.. it felt like it...
I recommend Nillkin, IT has very good Oleophobic coating, which makes the whole device a lot more enjoyable to use, but be careful whren you put it on non 100% straight surfaces it will slip onto the floor.
Alright it is more or less decided I will buy a new front cover with glass, I will make sure to get original parts with gorilla glass. Since the ebay link you linked to are chipped from china I guess I can just order straight from alixpress instead...
I have heard singapore post have quite fast shipping compared to china post.

just one question is hard to see in the videos.. but do I really need to disassembly every component all the circuits boards just to change the front screen ? do I need to open the case at all when using the heat gun/hair dryer ?
If as in the every component and circuit board has to be disassembled it is over my competence probably... unless I am super careful..

Mutch better if you want to purchase an original front to replace it. Don,t know if you really need to take all the components of for replacing the front screen, but you can make some research on it or you can ask on other forums, maybe are others with more experience.

yes I understand..must decide tomorrow then.. because of shipping times a fast decision need to be made otherwise I will have to wait too long..

blackinfinity said:
yes I understand..must decide tomorrow then.. because of shipping times a fast decision need to be made otherwise I will have to wait too long..
Click to expand...
Click to collapse
Man I was repairing the whole Mate7 from the scratch!
If u shattered the screen ;
1.You will need new one which cost £40-£60 2.You will have to strip the WHOLE phone which is pain!
3.You will have to open the back cover,which is very hard process.You will need hard force to pop back cover from hinges.(first you need to remove small bottom cover which is plastic.)You will have to pry it underneath is adhesive which holds that small cover firmly.
4.Once you manage to remove back cover you have to disconnect all flex cables.There are 3 black screws and 4 chrome screws(smae like two at bottom) which holds motherboard.
There is small black cover which covers all connectors and it is tricky to remove it,because left side is kind of locked under chrome metalic cover plate! You need to pry it slightly to the right to flip it upwards.Be careful! One black screw holds that small black plate!
Once you remove the motherboard, another and very very hard part awaits you!
5.Removing the battery!
You will need heat gun to remove battery but even that heat gun might ot help you to remove BIG battery without damage !!
I tried to remove battery without damage but no luck.So I will advise you to buy new battery for mate7 mine cost me just £8 from china but I had to wait almost a month to deliver! Disaster shipping from china!
So if you apply lot of heat you might be lucky remove battery without damage.
But I was scared to apply too much heat on battery it could result in explosion or fire!!!
So I rather purchased one.
Once you remove battery, you can remove bottom part of phone which is usb board with speaker and plastics. It is up to you you dont need to remove it.
6.Removing the damaged screen from (middle) supporting frame!
This can be easy depends how screen is damaged. BUT
Here you have 2 options to replace screen.
A:You can buy screen without supporting frame which is harder and more work and heat gunning around the screen and prying screen from middle frame.Needs like 30-40 seconds of heating around the screen not in the middle.
B:You can buy s reen with middle frame which is very easy.Screen is already fited in frame so you dont need to mess with very slim adhesive srtips around the screen(which I done)
Then you will have to remove all parts from middle frame. Ear speaker ,loud speaker usb board and replace it to new housing.
Once you will set the new screen you can put all parts back together..
Replacing screen for this phone is PAIN!
It really needs skills and be careful because it is very easy to scratch back cover.

XDADEVX said:
Man I was repairing the whole Mate7 from the scratch!
If u shattered the screen ;
1.You will need new one which cost £40-£60 2.You will have to strip the WHOLE phone which is pain!
3.You will have to open the back cover,which is very hard process.You will need hard force to pop back cover from hinges.(first you need to remove small bottom cover which is plastic.)You will have to pry it underneath is adhesive which holds that small cover firmly.
4.Once you manage to remove back cover you have to disconnect all flex cables.There are 3 black screws and 4 chrome screws(smae like two at bottom) which holds motherboard.
There is small black cover which covers all connectors and it is tricky to remove it,because left side is kind of locked under chrome metalic cover plate! You need to pry it slightly to the right to flip it upwards.Be careful! One black screw holds that small black plate!
Once you remove the motherboard, another and very very hard part awaits you!
5.Removing the battery!
You will need heat gun to remove battery but even that heat gun might ot help you to remove BIG battery without damage !!
I tried to remove battery without damage but no luck.So I will advise you to buy new battery for mate7 mine cost me just £8 from china but I had to wait almost a month to deliver! Disaster shipping from china!
So if you apply lot of heat you might be lucky remove battery without damage.
But I was scared to apply too much heat on battery it could result in explosion or fire!!!
So I rather purchased one.
Once you remove battery, you can remove bottom part of phone which is usb board with speaker and plastics. It is up to you you dont need to remove it.
6.Removing the damaged screen from (middle) supporting frame!
This can be easy depends how screen is damaged. BUT
Here you have 2 options to replace screen.
A:You can buy screen without supporting frame which is harder and more work and heat gunning around the screen and prying screen from middle frame.Needs like 30-40 seconds of heating around the screen not in the middle.
B:You can buy s reen with middle frame which is very easy.Screen is already fited in frame so you dont need to mess with very slim adhesive srtips around the screen(which I done)
Then you will have to remove all parts from middle frame. Ear speaker ,loud speaker usb board and replace it to new housing.
Once you will set the new screen you can put all parts back together..
Replacing screen for this phone is PAIN!
It really needs skills and be careful because it is very easy to scratch back cover.
Click to expand...
Click to collapse
ehhm... good luck OP

XDADEVX said:
Man I was repairing the whole Mate7 from the scratch!
If u shattered the screen ;
1.You will need new one which cost £40-£60 2.You will have to strip the WHOLE phone which is pain!
3.You will have to open the back cover,which is very hard process.You will need hard force to pop back cover from hinges.(first you need to remove small bottom cover which is plastic.)You will have to pry it underneath is adhesive which holds that small cover firmly.
4.Once you manage to remove back cover you have to disconnect all flex cables.There are 3 black screws and 4 chrome screws(smae like two at bottom) which holds motherboard.
There is small black cover which covers all connectors and it is tricky to remove it,because left side is kind of locked under chrome metalic cover plate! You need to pry it slightly to the right to flip it upwards.Be careful! One black screw holds that small black plate!
Once you remove the motherboard, another and very very hard part awaits you!
5.Removing the battery!
You will need heat gun to remove battery but even that heat gun might ot help you to remove BIG battery without damage !!
I tried to remove battery without damage but no luck.So I will advise you to buy new battery for mate7 mine cost me just £8 from china but I had to wait almost a month to deliver! Disaster shipping from china!
So if you apply lot of heat you might be lucky remove battery without damage.
But I was scared to apply too much heat on battery it could result in explosion or fire!!!
So I rather purchased one.
Once you remove battery, you can remove bottom part of phone which is usb board with speaker and plastics. It is up to you you dont need to remove it.
6.Removing the damaged screen from (middle) supporting frame!
This can be easy depends how screen is damaged. BUT
Here you have 2 options to replace screen.
A:You can buy screen without supporting frame which is harder and more work and heat gunning around the screen and prying screen from middle frame.Needs like 30-40 seconds of heating around the screen not in the middle.
B:You can buy s reen with middle frame which is very easy.Screen is already fited in frame so you dont need to mess with very slim adhesive srtips around the screen(which I done)
Then you will have to remove all parts from middle frame. Ear speaker ,loud speaker usb board and replace it to new housing.
Once you will set the new screen you can put all parts back together..
Replacing screen for this phone is PAIN!
It really needs skills and be careful because it is very easy to scratch back cover.
Click to expand...
Click to collapse
Hello and thanks, I appreciate your detailed instructions.
But I need to say one really IMPORTANT THING
IT IS NOT THE SCREEN THAT I NEED TO CHANGE THE ACTUAL SCREEN AND LCD IS WORKING PERFECTLEY WHAT I NEED TO CHANGE IS THE Front Screen Outer Glass Lens. i HAVE HIGH HOPES THAT IF I ONLY CHANGE THIS I DO NOT NEED TO DO ALL THE INSTRUCTIONS YOU DO SINCE I AM ONLY CHANGING THE GLASS NOT THE ACTUAL SCREEN, IT IS A VERY IMPORTANT DIFFERENCE BETWEEN SCREEN AND OUTER GLASS AND FRONT. I HOPE YOU WILL READ MY POST AND GIVE ME AN UPDATE BEFORE I PUSH THE BUY BUTTON THANKS!
This is the part I was going to order it is just the glass no lcd screen.

blackinfinity said:
Hello and thanks, I appreciate your detailed instructions.
But I need to say one really IMPORTANT THING
IT IS NOT THE SCREEN THAT I NEED TO CHANGE THE ACTUAL SCREEN AND LCD IS WORKING PERFECTLEY WHAT I NEED TO CHANGE IS THE Front Screen Outer Glass Lens. i HAVE HIGH HOPES THAT IF I ONLY CHANGE THIS I DO NOT NEED TO DO ALL THE INSTRUCTIONS YOU DO SINCE I AM ONLY CHANGING THE GLASS NOT THE ACTUAL SCREEN, IT IS A VERY IMPORTANT DIFFERENCE BETWEEN SCREEN AND OUTER GLASS AND FRONT. I HOPE YOU WILL READ MY POST AND GIVE ME AN UPDATE BEFORE I PUSH THE BUY BUTTON THANKS!
This is the part I was going to order it is just the glass no lcd screen.
Click to expand...
Click to collapse
Sorry but you are like 10 year old child..
So u wanna change your ''front Screen Outer Glass Lens'' ??? (that is damn long name for glass )
You have so much hopes ? OK .. go on .. I leave you to it ..
I wish you very best of luck ..
''''IT IS A VERY IMPORTANT DIFFERENCE BETWEEN SCREEN AND OUTER GLASS AND FRONT''
DDDDDD this was so funny :laugh: :good:
Fingers :fingers-crossed:

You was talking about changing the lcd not only the front Glass. I just wanted to make sure you need to do all the instructions to change only front glass. The lcd is working..

blackinfinity said:
You was talking about changing the lcd not only the front Glass. I just wanted to make sure you need to do all the instructions to change only front glass. The lcd is working..
Click to expand...
Click to collapse
And I will give you one last advice ; that my detailed post above I explained you how difficult it is .. YOU want to change glass only ??
And what you think, you can just do it without stripping phone apart ?? Are you magician ? You would have to open phone anyway !
And replacing glass on your screen, do you have any idea how you gonna do it? Removing glass from LCD is x10 TIMES hard that my instructions above man !
So you basically adding even more, harder work to hard work ..!
Do you even have
1.LCD separator heat machine ??
2.Cutting line wire ??
3.Cleaning alcohol chemicals ??
4.Optical clear adhesive glue ??
5.Ultraviolet curing lamp ??
Come oon man ...
I told you I wish you very best of luck..

This guy want to do the exact same thing - https://www.youtube.com/watch?v=O8HNBtl9MwI
You have the all process here - https://www.youtube.com/watch?v=nDiaQOzCvfE & https://www.youtube.com/watch?v=lUl8dCuhBGw
Take a look and decide if you want do it yourself and risk to mess things up or go with the phone and the replacing part to a service and let someone who did this before.

Display replacement

Unfortunately I crashed display on moto x play...so if anybody now trusted site to buy new one....tnx

Anyone found a display replacement that includes the front cover? Without it, it should be nearly impossible, am I right?
Gesendet von meinem XT1562 mit Tapatalk

I haven't seen any.
I tried combining the components and failed. Broke the circuitry in the LCD when trying to mount the frame...

I asked Motorola what i should do when i dropped my phone and the glas got broken. They told i should send it to their repair service, it was datrepair in Germany maybe its another in other countries. They Arranged everything for me and i paid 120€ for the replacement, just the glass maybe touch but idk, screen was ok when i was sending it in. They even took care of shipping without any cost for me.
Normaly i repair devices by myselfe but in fact the phone was only 1 Month old i refused to it.

If you have a heat gun (or hair dryer) and a set of torx screwdrivers, you should be able to fix it at home. If something is tight, never force it. Use plastic tools to pry open the case, usually comes together with the screwdriver set if you buy them online

pijes said:
If you have a heat gun (or hair dryer) and a set of torx screwdrivers, you should be able to fix it at home. If something is tight, never force it. Use plastic tools to pry open the case, usually comes together with the screwdriver set if you buy them online
Click to expand...
Click to collapse
For that, you would need the lcd including the frame which is nicht available yet...
So atm nearly impossible.

I managed to get some tiny cracks on the edge near the front camera (it fell onto metal from my jacket, i was bending over). Thankfully it's not the touch area, but i now somehow understand why so many people have cracked phones. It happens so quickly. And i was treating it like a raw eggshell, too.

I dropped mine as I was getting out of the car.It cost me R1500 (R is for South African Rand) to replace the screen.The guys who repaired it had to crack the plastic frame to get the screen out .They used glue to keep the new screen in place.I dont think they knew what they were doing,but it was the only repair center that was in the same province as me.

http://www.ebay.com/itm/LCD-Screen-...Assembly-For-Moto-X-Play-XT1562-/351672097858
Finally a full assembly, actually think I am going to try AGAIN. maybe I will make a video on it

There is also a full assembly available on aliexpress. http://www.aliexpress.com/item/5-5-...-1&btsid=5347749e-d1d5-4871-a4c2-dafc85fd700d
I should have checked ebay prior as that one ships from the states and would have got here way quicker.

Jeklund said:
There is also a full assembly available on aliexpress. http://www.aliexpress.com/item/5-5-...-1&btsid=5347749e-d1d5-4871-a4c2-dafc85fd700d
I should have checked ebay prior as that one ships from the states and would have got here way quicker.
Click to expand...
Click to collapse
NewAndreas said:
http://www.ebay.com/itm/LCD-Screen-...Assembly-For-Moto-X-Play-XT1562-/351672097858
Finally a full assembly, actually think I am going to try AGAIN. maybe I will make a video on it
Click to expand...
Click to collapse
Yeah, please make a video it'll help many.

https://www.youtube.com/watch?v=5_yzMPWCQOM This video shows the whole process with a complete display assembly. Its incredibly more difficult if you get the screen without the frame as the screen is affixed to the frame with some sort of adhesive foam.

I also broke my screen and ordered a replacement. Unfortunately I broke the frame in the process of removing the old screen.
Luckily I got my hands on a replacement frame and some 3M 2 milimeters adhesive strips. Praying for everything to work out put together..

Crizzl said:
I also broke my screen and ordered a replacement. Unfortunately I broke the frame in the process of removing the old screen.
Luckily I got my hands on a replacement frame and some 3M 2 milimeters adhesive strips. Praying for everything to work out put together..
Click to expand...
Click to collapse
Best of luck, if you can document the process as there isn't much info out on screen replacements where you affix a new frame to a screen. My frame broke when I dropped my phone which is why I just got the whole unit. Cost me about $62 CAD shipped for the whole unit.

Has anyone here tried a replacement? Any tips?

So is it possible to change just the glass without the whole display unit?
I'm talking bout this part: Outer Screen Glass Replacement

apokolok said:
So is it possible to change just the glass without the whole display unit?
I'm talking bout this part: Outer Screen Glass Replacement
Click to expand...
Click to collapse
So, I tried for myself with my old display after I got a replacement new display including a new frame.
It is absolutely impossible to separate the front glass from the digitizer and display without destroying all three.
I think even a professional wouldn't be able to do it. Display and digitizer are very flexible while the screen is glued really really good to them
I heated it up to no avail. Maybe some glue remover would have helped, but I don't think it would get between the glass and the digitizer.
These phones are just not build to be repared, they are build to be thrown away.
Exchanging the new frame including display was no easy job too, but it can be done.
Be sure to have a high quality Torx T3 screwdriver or bit, the cheap china ones will do nothing but destroy the tiny screws.

Screen replacement

Has anyone already buy a screen replacement foe your moto x play? I broke my screen a few days ago.. i've ordered the replacement on ebay and the seller says the design it's like the original.

Yeah I did and replaced it. What I noticed is that the glue on the very thin black frame that attaches to the screen does not go back on after you have taken it off with a heat gun. Also, be very careful while performing the step of separating the frame from the screen the frame breaks all too easy. Most repair guides don't show you that step as they show the part that has the frame attached to it. Another tip is make sure that you take your time removing the components while using the heat gun... Patience really does pay off. Good luck.

joeanca said:
Yeah I did and replaced it. What I noticed is that the glue on the very thin black frame that attaches to the screen does not go back on after you have taken it off with a heat gun. Also, be very careful while performing the step of separating the frame from the screen the frame breaks all too easy. Most repair guides don't show you that step as they show the part that has the frame attached to it. Another tip is make sure that you take your time removing the components while using the heat gun... Patience really does pay off. Good luck.
Click to expand...
Click to collapse
Oohh i think you only replaced the screen.
I ordered the screen + lcd + frame do i still need a heat gun? And does the screen looks and feels the same? Thanks for the answer!

Yup thats what I did. It does feel the same and looks the same.
Sent from my XT1562 using Tapatalk

Neperpika said:
Oohh i think you only replaced the screen.
I ordered the screen + lcd + frame do i still need a heat gun? And does the screen looks and feels the same? Thanks for the answer!
Click to expand...
Click to collapse
I also ordered the full kit including the frame.
The display is on par with the original one. Only problem with mine is that the screen glass isn't glued perfectly to the frame/display on both sides on top. You can see the lcd backlight shining through a bit if you view the device from the side.
Fixed it with a back cover ^^
The replacement process isn't that easy, you should have time and good light. A heat gun (or hair dryer) will help as you need to get the battery and the logic board unglued.
Another essential tool will be a high quality Torx T3 screwdriver. The little screws are quite sensible and the cheap china tools will do nothing but destroy them.
With a steady hand and a bit of luck it can be done. :good:
Edit: This video was quite helpful. It's in german but most of the video content speaks for itself.

can anyone suggest me which adhesive should i use for screen replacement[ouer glass only]. beter if anyone can provide me indian site links but any name suggestion will also work.

my front glass has scattered,display and touch are fine.I have ordered front glass only in amazon.
https://www.amazon.in/Front-Replace...92209&sr=8-5&keywords=moto+x+play+front+glass
can we replace it without damaging display or touch. Thanx in advance

ViShNu ViZz said:
my front glass has scattered,display and touch are fine.I have ordered front glass only in amazon.
https://www.amazon.in/Front-Replace...92209&sr=8-5&keywords=moto+x+play+front+glass
can we replace it without damaging display or touch. Thanx in advance
Click to expand...
Click to collapse
Bro let me tell u one thing, before buying this glass contact a repair shop and make sure that he will be able to replace it,
Replacing the glass is very tough job to do, it requires a lot of experience, you can even check videos on YouTube about changing the glass.
If the mechanic agrees and is sure he will be able to change glass then only try to buy it.
And don't try to change it by yourself at home cuzz it needs special equipment to replace it.
Good luck
Hit thanks if I helped you

[email protected] said:
Bro let me tell u one thing, before buying this glass contact a repair shop and make sure that he will be able to replace it,
Replacing the glass is very tough job to do, it requires a lot of experience, you can even check videos on YouTube about changing the glass.
If the mechanic agrees and is sure he will be able to change glass then only try to buy it.
And don't try to change it by yourself at home cuzz it needs special equipment to replace it.
Good luck
Hit thanks if I helped you
Click to expand...
Click to collapse
i watched couple of youtube videos but its about completely changing display(touch,display,front glass)

ViShNu ViZz said:
i watched couple of youtube videos but its about completely changing display(touch,display,front glass)
Click to expand...
Click to collapse
I think this is what u r looking for
https://youtu.be/zEI6tYIVtl4

ViShNu ViZz said:
i watched couple of youtube videos but its about completely changing display(touch,display,front glass)
Click to expand...
Click to collapse
and did u made it?
the linked vid above is for a moto x, no play, but guess its the same. anyone knows what kind of glue he is putting between the screen and digitizer?

yes bro the xplay will be same like that and don't do that yourself because the process should be done by a professional mechanic... i asked some mobile repairing shop and he said it will charge 1500 to change the glass so i decided to change it what about you?

I've replaced mine successfully.
Although it's "OEM", I have noticed quality issues.
The screen is very sensitive to pressure (Distorts when touching screen) and white spots towards the top of the display are noticeable under white pixels.
I believe something is pressing into thee back of my screen but I ain't touching it until I recieve my replacement earpiece.
Pretty modular phone, 3.5 jack, battery, NFC, earpiece and buttons are easily replaceable.
Just be very cautious when putting your phone back together, don't do what I did and just squeeze it all back together in a rush.

Mix lcd replacement without frame

Hello everyone,
I recently dropped my mix and I wish to get an lcd and replace it by myself.
I just wanted to ask if you guys know if the screen is glued to the frame or just attached with some screws.
I looked in YouTube and it seems it is not glued together but the lady in the shop said they sell the screen with frame that is already glued.
And if I get the screen separated can I glue it by myself? Or I better get glued one?
Also if anyone finds a good quality replacement video I'll be happy to watch it.
Thank you in advance
Roy.

Better to get glued one, will save lot of time.
The plastic frame is glued into the side of LCD outer glass.
I'm not sure what type of glue that can be use.

kevin168 said:
Better to get glued one, will save lot of time.
The plastic frame is glued into the side of LCD outer glass.
I'm not sure what type of glue that can be use.
Click to expand...
Click to collapse
So the screen is supposed to be glued to the frame? I saw some mix teardown and lcd replacement videos where the screen is not glued. You sure about that?

Yes i'm sure about it.
Just replaced the screen last week

Hello,
Thanks for enlightening us, can you share a screenshot and where you bought it from? Is it easy to replace without damaging internal parts and does it function as it was before? Is there a case than can protect it aganist drop cause mine broke in less than a feet.

kevin168 said:
Yes i'm sure about it.
Just replaced the screen last week
Click to expand...
Click to collapse
Where did you get the screen from?

XIAOMI MI MIX 6.4inch LCD Display TP Tools Digitizer Frame Touch Screen Pannel full assembly
http://s.aliexpress.com/I7JzMZRF
Housing Frame Bezel Chassic for xiaomi mi mix Free Shipping
http://s.aliexpress.com/7J7NJbum
for XIAOMI MI MIX Back Cover Glass Back Battery Cover Free Shipping
http://s.aliexpress.com/Nj6buMfu

always better to get the screen with frame. Saves time and it's very hard to find good adhesive that will work like the one factory used.

Can you just replace the outer glass and not the whole lcd? just dropped my phone and now there's a huge scratch on the screen. The lcd and frame are good but there's a huge scratch on the screen which is annoying to me.

Glass Replacement

Over the weekend I dropped my mix 2s and have cracked the bottom of my screen glass.
I was wondering if anyone else has had this problem and fixed this. I have purchased a new glass on eBay: https://www.ebay.com.au/itm/263620735738?ViewItem=&item=263620735738
I am planning to take it to a professional repair shop.
Is it likely that they will be able to separate the glass from the LCD and glue on this replacement? Is there any risk of this going wrong and my screen from acting weird afterwards?

No, it is in fact very unlikely they'll be able to separate them.
It will be more expensive but you'll have to get an lcd display and glass assembly all together.

SolarisSixth said:
No, it is in fact very unlikely they'll be able to separate them.
It will be more expensive but you'll have to get an lcd display and glass assembly all together.
Click to expand...
Click to collapse
According to this: Ali Express
LCD Only: If the image under the glass is broken and the touch panel is NOT then you only need an LCD.
Touch Panel aka Digitizer: If the top touch panel or aka glass top is cracked or broken but the image under it is fine then you only need the Touch Panel.
Complete Screen with Touch Panel and LCD: If the top touch panel is broken and the LCD image is either black liquid or cracked you need a complete screen.
Click to expand...
Click to collapse
According to that; If the glass is cracked, I only need the Digitizer replaced.
I am happy to get the whole thing, its just I have already ordered a Digitizer and thought this was all I needed. I could be wrong.

Any recommendation on the type of screen I should purchase for best results?
Ali Express Search

andyphone said:
Over the weekend I dropped my mix 2s and have cracked the bottom of my screen glass.
I was wondering if anyone else has had this problem and fixed this. I have purchased a new glass on eBay: https://www.ebay.com.au/itm/263620735738?ViewItem=&item=263620735738
I am planning to take it to a professional repair shop.
Is it likely that they will be able to separate the glass from the LCD and glue on this replacement? Is there any risk of this going wrong and my screen from acting weird afterwards?
Click to expand...
Click to collapse
Hi there
I got the same Problem. Screen and Touch and everything is OK. Did you manage to replace the broken glas? Was the Ebay thing okei or did u buy something different?
Cheers

andyphone said:
Over the weekend I dropped my mix 2s and have cracked the bottom of my screen glass.
I was wondering if anyone else has had this problem and fixed this. I have purchased a new glass on eBay: https://www.ebay.com.au/itm/263620735738?ViewItem=&item=263620735738
I am planning to take it to a professional repair shop.
Is it likely that they will be able to separate the glass from the LCD and glue on this replacement? Is there any risk of this going wrong and my screen from acting weird afterwards?
Click to expand...
Click to collapse
Hi i managed to change my whole lce by myself. Its quite hard only for heating the glue and opening everything. There is no guide on internet so i just follow mi mix 2 guide. I bought from aliexpress, 60 euro, claimed to be original, checked its JDI from cti app, and very good quality, color also very good, nothing weird, glass also oleophobic.

Any update on this? I'm in the same situation, front glass is cracked but phone otherwise fine. Replacement is only $10, but can just the glass even be replaced?

I just bought the whole LCD/Digitizer for $60, not even going to attempt to separate just the glass

emanuel.caesar said:
Hi i managed to change my whole lce by myself. Its quite hard only for heating the glue and opening everything. There is no guide on internet so i just follow mi mix 2 guide. I bought from aliexpress, 60 euro, claimed to be original, checked its JDI from cti app, and very good quality, color also very good, nothing weird, glass also oleophobic.
Click to expand...
Click to collapse
Hey emanuel.caesar,
thanks for your helpful post. A few further questions from my side:
which lcd did you choose exactly? Are you still satisfied with the quality? And the last question Does the video guide for the Mi Mix 2 work for the Mi Mix 2s as well or are many things different? Thank you in advance for a short reply.

Hello,
Is not a good idea to try to just replace de LCD screen. I did this operation many times in the past and I can confirm that's a long operation (~1h30), there's a lot of risks that you break the digitizer and for a good result, you need LCD glue and a UV machine.
So, I think it's a better idea to replace all the screen: LCD + Digitizer.

Any suggested YouTube videos to replace the glass + LCD + digitizer?
Looking at a used phone with broken glass. It's like $10 for glass or $32 for the whole set and if I recall last time I had glass swapped it was like $60 labor and no guarantee the LCD wouldn't break. I'm pretty technical have repaired plenty of phones Android and iPhone. Anyone have a good link for removing the LCD / digitizer / glass unit? Is this like the Samsung where you need to use a blow dryer to heat the adhesive to get it off? Or like an iPhone where you just take screws out and pry the panel out? Much appreciated