i535 shows up as i605 - Verizon Samsung Galaxy S III

Hello. I've tried searching for help on this but came up empty handed. I recently installed hyperdrive rls8 for my gs3 and after the install some of my apps didn't install. I looked under phone settings an noticed my model number was sch-i605 instead of i535. Anyone know how I can fix this?

blackdeath159 said:
Hello. I've tried searching for help on this but came up empty handed. I recently installed hyperdrive rls8 for my gs3 and after the install some of my apps didn't install. I looked under phone settings an noticed my model number was sch-i605 instead of i535. Anyone know how I can fix this?
Click to expand...
Click to collapse
Open up your build.prop in settings and Check what device name and provider look like.
Rls 8 doesn't sound right, are you sure you flashed the correct rom?
Sent from my SCH-I535 using Tapatalk 2

BadUsername said:
Open up your build.prop in settings and Check what device name and provider look like.
Rls 8 doesn't sound right, are you sure you flashed the correct rom?
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
My wife has the exact same rom on her s3 and her phone shows up as an i535. I'm fairly new at this. Where exactly is the build.prop?

blackdeath159 said:
My wife has the exact same rom on her s3 and her phone shows up as an i535. I'm fairly new at this. Where exactly is the build.prop?
Click to expand...
Click to collapse
It's in the system folder in your root directory, you may have flashed the wrong rom from within aroma by accident
Sent from my SCH-I535 using Tapatalk 2

BadUsername said:
It's in the system folder in your root directory, you may have flashed the wrong rom from within aroma by accident
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
I found the file build.Prop and the build shows as i535 but the model still shows up as i560. I tried a system reset but stii shows up as i560

blackdeath159 said:
I found the file build.Prop and the build shows as i535 but the model still shows up as i560. I tried a system reset but stii shows up as i560
Click to expand...
Click to collapse
If everything is acting normally you can keep it the same, otherwise you could try reflashing the rom or a different one.
Sent from my SCH-I535 using Tapatalk 2

BadUsername said:
If everything is acting normally you can keep it the same, otherwise you could try reflashing the rom or a different one.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
I guess editing the build.prop isn't an option? Ill try to unroot my phone then root with a different rom

blackdeath159 said:
I guess editing the build.prop isn't an option? Ill try to unroot my phone then root with a different rom
Click to expand...
Click to collapse
You could edit it, but if you flashed an incorrect rom build then more stuff will be different.
I would just clean flash the whole thing.
Sent from my SCH-I535 using Tapatalk 2

Related

[ROM][STOCK]Android 4.1.1 (JRO03D) ROOT, DeoDexed & Odexed

This is a stock build from Google with ROOT and a few extras for anyone to use as they wish.
Enjoy.
Features
Android OS, 4.1.1 Jellybean build JRO03D
Insecure boot.img
Rooted with the latest superuser
Busybox
Deodexed and Odexed options
Fully Zipaligned
Credits
Google - for Jelly Bean's
Chainfire - For ROOT access
Instructions
Flash via. Custom Recovery
Downloads
Nexus7-JRO03D-DeoDexed-ROOT_4.1.1.signed.zip
Nexus7-JRO03D-Odexed-ROOT_4.1.1.signed.zip
Old Downloads
Nexus7-JRN84D-DeoDexed-ROOT_signed.zip
Nexus7-JRN84D-Odexed-ROOT_signed.zip
More to come
One for the road
Thanks man keep the roms coming
Sent from my KRAKD Nexus 7 using xda app-developers app
Nice work, this will be a great base for anyone who wants to make a stock-based custom rom.
Nice work, I'm surely gonna try .Keep up.
perfect this is what i was looking for!
Hello. On your next 4.1.1 update, can you add Tablet UI?
Thanks
Sent from my SGH-T959
Any word on a 4.1.1 Update to a DeoXed version..
Gunthermic said:
Any word on a 4.1.1 Update to a DeoXed version..
Click to expand...
Click to collapse
Yea will do pretty soon just waiting to get my hands on the tablet again lol. One of the other crew has it.
Sent from my Galaxy Nexus using Tapatalk 2
Thanks! Waiting for 4.1.1 too!
Does anyone know if you flash this does it clear the entire memory or just the os partition. I have flashed many Roms before on other android devices but all those had an SD card and with the unlocking process I know the entire data was erased.
Sent from my Nexus 7 using xda premium
oraclegustavo said:
Does anyone know if you flash this does it clear the entire memory or just the os partition. I have flashed many Roms before on other android devices but all those had an SD card and with the unlocking process I know the entire data was erased.
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
It won't erase your SD card
Sent from my Galaxy Nexus using Tapatalk 2
CdTDroiD said:
It won't erase your SD card
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
ok, thanks. Now I tried downloading both versions and installing via clockwork mod and it aborts. Saying status 0. Any ideas?
oraclegustavo said:
ok, thanks. Now I tried downloading both versions and installing via clockwork mod and it aborts. Saying status 0. Any ideas?
Click to expand...
Click to collapse
Ah OK I'll have a look into it tonight for you, its probably the updater script if you want you can try use the META folder from another ROM (nexus 7 ROM) and see if it flashes until I fix it later
Sent from my Galaxy Nexus using Tapatalk 2
Yup looks like I'll be waiting because I have absolutely no idea what you just said
Sent from my Nexus 7 using xda premium
Hahaha probably best then
Sent from my Galaxy Nexus using Tapatalk 2
It appears it not just your downloads I can't seem to flash any Roms. I tried to flash other ROM and it keeps giving me same error. It almost seems like it can find the zip files on SD card to flash and then it goes to flash and can no longer find the file. Anyone have any insight into this?
first off seems D/L is not working but I dint think there were so many issues with ROM. We definetly need a solid Stock ROM with ROOT (4.1.1), Hope its works when I flash
is this completely stock? no tablet UI dpi build.prop changes? (that's what i'm after)
ace9988 said:
is this completely stock? no tablet UI dpi build.prop changes? (that's what i'm after)
Click to expand...
Click to collapse
Yes that's right
Sent from my Galaxy Nexus using Tapatalk 2

Is the UCLI3 update known to soft-brick phones w/ CWM?

I just got an update notification for build UCLI3. Is it safe to upgrade to on a phone with Clockworkmod Recovery installed? Some people are saying it boots into recovery, but then says "update failed" once rebooted.
TL;DR: Has anyone seamlessly updated to UCLI3 on a phone with CWM installed?
almost any update to a phone that doesn't have the stock recovery wont update due the fact that the update thats being sent out is processed differently with stock vs cwm and twrp
an no its not good to update with non stock recovery
hmmwhatsthisdo said:
I just got an update notification for build UCLI3. Is it safe to upgrade to on a phone with Clockworkmod Recovery installed? Some people are saying it boots into recovery, but then says "update failed" once rebooted.
TL;DR: Has anyone seamlessly updated to UCLI3 on a phone with CWM installed?
Click to expand...
Click to collapse
Read the other 4 threads created about this and you'll find out the answer is no, it will not work.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Anyone extracted the radio from this yet?
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Jnewell05 said:
Anyone extracted the radio from this yet?
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
Yes, cdsheperd did
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
xcrazydx said:
Read the other 4 threads created about this and you'll find out the answer is no, it will not work.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
I did. I didn't know whether or not the "update failed" message kept the phone from booting normally. I don't exactly have an hour or so to check.
hmmwhatsthisdo said:
I did. I didn't know whether or not the "update failed" message kept the phone from booting normally. I don't exactly have an hour or so to check.
Click to expand...
Click to collapse
You're welcome
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
So, would returning to just the stock recovery, then doing the OTA and re-installing CWM work, or do I need to do a factory reset as well beforehand?
hmmwhatsthisdo said:
So, would returning to just the stock recovery, then doing the OTA and re-installing CWM work, or do I need to do a factory reset as well beforehand?
Click to expand...
Click to collapse
Should work with no reset
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
hmmwhatsthisdo said:
I just got an update notification for build UCLI3. Is it safe to upgrade to on a phone with Clockworkmod Recovery installed? Some people are saying it boots into recovery, but then says "update failed" once rebooted.
TL;DR: Has anyone seamlessly updated to UCLI3 on a phone with CWM installed?
Click to expand...
Click to collapse
I got the update notification as well. It downloaded and rebooted to CWM recovery without installing. Rebooted to system with no problems.I did an ODIN revert to stock and checked for updates, it downloaded and installed properly. Then reinstalled CWM via ODIN.Then rooted with flashable SU zip. all seems fine so far.
xcrazydx said:
Yes, cdsheperd did
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
Link?
copene said:
Link?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=33344009
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
xcrazydx said:
http://forum.xda-developers.com/showthread.php?p=33344009
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
Thanks man, just flashed.
copene said:
Thanks man, just flashed.
Click to expand...
Click to collapse
Yup! How's it working for you? It slowed down my data to about 2/3 of what it used to be on lf6. So it's no good for me.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
xcrazydx said:
Yup! How's it working for you? It slowed down my data to about 2/3 of what it used to be on lf6. So it's no good for me.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
Yeah I also noticed a significant drop in LTE speeds. Maybe more around 5-10mbps slower.

[Q] revert back to stock- USB port damaged?

Hi guys,
my rooted 4.2.2 rom'd gs3 has a finicky usb port and will not charge. I need to return the phone for a warranty exchange, but is there a way I can do that when the usb port is damaged and is not recognized by the pc? thanks for the help, it is greatly appreciated!
Have you tried mobile odin app.
Sent from my GT-P5113 using xda premium
amotamatapia said:
Hi guys,
my rooted 4.2.2 rom'd gs3 has a finicky usb port and will not charge. I need to return the phone for a warranty exchange, but is there a way I can do that when the usb port is damaged and is not recognized by the pc? thanks for the help, it is greatly appreciated!
Click to expand...
Click to collapse
1. Mobile odin, however I've personally never used it. There are probably guides out there somewhere how to return the phone to stock.
2. You may still be under samsung's warranty period, they don't care if your phone is rooted and will fix hardware problems. They will flash the most recent stock rom and firmware they have to your phone so you'd have to re root it.
Sent from my SCH-I535 using Tapatalk 2
I have not tried the mobile odin app (did not know it existed). I will try that and post back results in a little while. Thanks everyone
Its pretty straight forward. It does cost you a few bucks but its always nice to have and support a great developer.
Sent from my GT-P5113 using xda premium
I downloaded the 1.2gb file which was supposed to flash the stock ROM and lock the boot loader, but all it did was wipe my current ROM? Can anyone help me understand what I did wrong? Thanks again! I used the mobile Odin app and it all seemed OK ...md5 sum was good too
bbqsfire said:
Its pretty straight forward. It does cost you a few bucks but its always nice to have and support a great developer.
Sent from my GT-P5113 using xda premium
Click to expand...
Click to collapse
Posted above this the issues I'm having. Thanks for your help
What exactly do you mean wiped your current rom. Does it boot, you get anything to happen or just blank.
Sent from my SCH-I535 using xda premium
amotamatapia said:
I downloaded the 1.2gb file which was supposed to flash the stock ROM and lock the boot loader, but all it did was wipe my current ROM? Can anyone help me understand what I did wrong? Thanks again! I used the mobile Odin app and it all seemed OK ...md5 sum was good too
Click to expand...
Click to collapse
What guide did you follow? You could've done a number of things wrong, try to boot into recovery or download mode to see if you're hardbricked.
Sent from my SCH-I535 using Tapatalk 2
BadUsername said:
What guide did you follow? You could've done a number of things wrong, try to boot into recovery to see if you're hardbricked.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
Looks like I cannot boot into recovery. Download mode is fine. .the phone just boots into the 4.2.2 ROM I had. I was using this guide to revert back to stock
http://forum.xda-developers.com/showthread.php?t=1762709
bbqsfire said:
What exactly do you mean wiped your current rom. Does it boot, you get anything to happen or just blank.
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
It did a data wipe of the ROM I currently had
amotamatapia said:
It did a data wipe of the ROM I currently had
Click to expand...
Click to collapse
Ok I read your post from earlier. What file did you try to flash. Was the old 4.1.1 or one of the newer 4.1.2 img files
Sent from my SCH-I535 using xda premium
bbqsfire said:
Ok I read your post from earlier. What file did you try to flash. Was the old 4.1.1 or one of the newer 4.1.2 img files
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
it was this one: COMBINATION_I535VRBLK3_I535VZWBLK3_381038_REV09_u ser_low_ship_NOWIPE_FIXED.tar.md5
which is 4.1.1 i believe
amotamatapia said:
it was this one: COMBINATION_I535VRBLK3_I535VZWBLK3_381038_REV09_u ser_low_ship_NOWIPE_FIXED.tar.md5
which is 4.1.1 i believe
Click to expand...
Click to collapse
Correct it is the 4.1.1 img. I am away from my home computer but I think that might have been the wrong file since you want to go back to stock. I will try to search the thread for the file I used during my training
Sent from my SCH-I535 using xda premium
---------- Post added at 09:52 AM ---------- Previous post was at 09:43 AM ----------
amotamatapia said:
it was this one: COMBINATION_I535VRBLK3_I535VZWBLK3_381038_REV09_u ser_low_ship_NOWIPE_FIXED.tar.md5
which is 4.1.1 i believe
Click to expand...
Click to collapse
The link below should take you to the mb1 file. This will wipe everything and should take you back to stock 4.1.2. I have not done this method in a while so if something borks im sorry for mentioning it.
http://forum.xda-developers.com/showthread.php?t=
Sent from my SCH-I535 using xda premium
bbqsfire said:
Correct it is the 4.1.1 img. I am away from my home computer but I think that might have been the wrong file since you want to go back to stock. I will try to search the thread for the file I used during my training
Sent from my SCH-I535 using xda premium
---------- Post added at 09:52 AM ---------- Previous post was at 09:43 AM ----------
The link below should take you to the mb1 file. This will wipe everything and should take you back to stock 4.1.2. I have not done this method in a while so if something borks im sorry for mentioning it.
http://forum.xda-developers.com/showthread.php?t=
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
Thanks for your help I was able to get a usb connection enough and I used Odin on my laptop. The only problem I have now is that the custom unblock symbol appears when I boot up the phone. Any idea how to remove that now that root is gone? Ignore the following words...my phone won't let me edit them out. Thanks again.
Edit: it looks like the file I used was a 4.0.4 image. For return purposes is it fine if it's the older version? There should be no signs of root now. I'll keep checking for updates though
amotamatapia said:
Thanks for your help I was able to get a usb connection enough and I used Odin on my laptop. The only problem I have now is that the custom unblock symbol appears when I boot up the phone. Any idea how to remove that now that root is gone? Ignore the following words...my phone won't let me edit them out. Thanks again.
Edit: it looks like the file I used was a 4.0.4 image. For return purposes is it fine if it's the older version? There should be no signs of root now. I'll keep checking for updates though
Click to expand...
Click to collapse
You should be able to go into settings and factory reset your phone and then try taking the ota.
Sent from my SCH-I535 using xda premium
bbqsfire said:
You should be able to go into settings and factory reset your phone and then try taking the ota.
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
Thanks for your help throughout this process. I definitely was pretty frazzled at the whole thing !
bbqsfire said:
You should be able to go into settings and factory reset your phone and then try taking the ota.
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
Phone isn't wanting to update the android version...should I be worried for warranty exchange periodpurposes?
amotamatapia said:
Phone isn't wanting to update the android version...should I be worried for warranty exchange periodpurposes?
Click to expand...
Click to collapse
I would, if you have an ics rom they will be able to tell something is off. It should accept an OTA update. If you can odin again, use the vrblk3 image and accept the ota to vrbmb1. It may not be updating due to to the jump from ics to the most recent base. That will make sure you're completely back to stock, with a locked bootloader, and a stock recovery.
Sent from my SCH-I535 using Tapatalk 2
BadUsername said:
I would, if you have an ics rom they will be able to tell something is off. It should accept an OTA update. If you can odin again, use the vrblk3 image and accept the ota to vrbmb1. It may not be updating due to to the jump from ics to the most recent base. That will make sure you're completely back to stock, with a locked bootloader, and a stock recovery.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
I can only find 4.1.1 files...and the link posted earlier in the thread doesn't work. Any idea where to find a 4.1.2 version?

[Q] camera not working on synergy rom r484 verizon galaxy s3

Well ive flashed over and over again. i have a completely unlocked bootloader and recovery. synergy rom just doesnt to want to work completely on my phone. i thought maybe my download was bad so i downloaded again from my phone and that didnt work. either. once i select all my options from the installer from synergy it fails on ziggy kernel. is says values not updated and but still gives me kernel install ok. tried it with the stock kernel too and that installs just fine but camera still fails. thats pretty much the only problem im having and i cant seam to find an answer anywhere so thats why i posted. i know most people arent worried about the camera but i got a baby girl and i take a lot of pics lol please any help
I'm having similar problems. If you find a fix please let me know. Will do the same.
vitokes said:
Well ive flashed over and over again. i have a completely unlocked bootloader and recovery. synergy rom just doesnt to want to work completely on my phone. i thought maybe my download was bad so i downloaded again from my phone and that didnt work. either. once i select all my options from the installer from synergy it fails on ziggy kernel. is says values not updated and but still gives me kernel install ok. tried it with the stock kernel too and that installs just fine but camera still fails. thats pretty much the only problem im having and i cant seam to find an answer anywhere so thats why i posted. i know most people arent worried about the camera but i got a baby girl and i take a lot of pics lol please any help
Click to expand...
Click to collapse
Baseband version?
Sent from my SCH-I535 using Tapatalk 4 Beta
Addiso said:
Baseband version?
Sent from my SCH-I535 using Tapatalk 4 Beta
Click to expand...
Click to collapse
of what my stock rom or the synergy rom?
cause my stock rom is baseband I535VRBMF1
Need to flash a different kernel. I use KT747
Sent from my SCH-I535 using xda app-developers app
sjpritch25 said:
Need to flash a different kernel. I use KT747
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
ive tried searching for this kernel. do you by any chance have a link?
or any other kernels available
vitokes said:
ive tried searching for this kernel. do you by any chance have a link?
or any other kernels available
Click to expand...
Click to collapse
nevermind i found it i will post results
deputyvanhalen said:
I'm having similar problems. If you find a fix please let me know. Will do the same.
Click to expand...
Click to collapse
hey kt747 kernel worked. it fixed the camera and now its running perfectly good. try that way
can you link me to the kernel you downloaded? I've found one but it says it's for AT&T and I'm on big red (verizon)
vitokes said:
hey kt747 kernel worked. it fixed the camera and now its running perfectly good. try that way
Click to expand...
Click to collapse
deputyvanhalen said:
can you link me to the kernel you downloaded? I've found one but it says it's for AT&T and I'm on big red (verizon)
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=41733434
that should be it if not just copy paste it. its a little down the line and it has all 4 carriers.
big red is in green and make sure you get the touchwiz JB 4.1.1 and 4.1.2 download
install:
1) flash your rom and get it started
2) Back to recovery and flash KT747
3) After it install stay in recovery and wipe dalvik and cache
4) Fix Permissions
all of this at the same time you flash kt747
hope it works
Flash any kernel that has been updated to md3 source and up, just so you aren't just left with Ktoonsez as your only option, Lean kernel also works.
Sent from my SCH-I535 using Tapatalk 4 Beta
Thanks, i'm running cm 7/16 nightly. Flashed the ktoonsez aosp kernel and still camera can't connect. Idk why this won't work on my phone.
Addiso said:
Flash any kernel that has been updated to md3 source and up, just so you aren't just left with Ktoonsez as your only option, Lean kernel also works.
Sent from my SCH-I535 using Tapatalk 4 Beta
Click to expand...
Click to collapse

back to 4.0.4 ?

dont ask was but personal preff, id like to be back on 4.0.4. but everytime i try and flash stock ship tar and bootloader it just get stuck at samsung galaxy s3 screen, and i try to go to recovery and it goes to the android and it falls over and dies and has buch of fail text in red.. is there no way to go back? im on 4.1.2
Hmmm. I odined back just see and it works for me. How are you flashing it?
Also this should be moved to q&a section.
Sent from my SCH-I535 using Tapatalk
FeelLikeThis said:
Hmmm. I odined back just see and it works for me. How are you flashing it?
Also this should be moved to q&a section.
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
can you post me or point me to the odin files? i got the 4.0.4 from the sammobile website unziped the zip and flashed the .tar file. after that is done flashing it says (myphone) "samsung galaxy s3" then the blue recovery booting, then it still shows the unlock icon..i understand id have to wipe in recovery but it just fails after.. if you really did odin, could you post the files you used and give me a step by step.. it should be much app.!
I'll put it on my drop box later when I get home again.
Sent from my SCH-I535 using Tapatalk
FeelLikeThis said:
I'll put it on my drop box later when I get home again.
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
thank you much.. can you tell me what to do? dont you have to flash the bootchains or whatever? im just lost.. im on stock rooted 4.1.2 right now.
If you look for the thread with root66 it should tell you exactly what to do, but I can post it up when I get you the files.
Sent from my SCH-I535 using Tapatalk
I've look through too many with no luck and if you tried it and it worked I feel good about you posting them and telling me your steps.
Sent from my SCH-I535 using XDA Premium 4 mobile app
FeelLikeThis said:
If you look for the thread with root66 it should tell you exactly what to do, but I can post it up when I get you the files.
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
hate being a nag, but im a student so i cant be up all night flashing shizz to my phone.... again lol. do you have any estimate of when you'd be able to help me out? and i tried that thread you referred to, and it just had me stumped again.. :silly:
did you ever get around too it?

Categories

Resources