Related
Update:
Stock update.zip needed!!
or, does those mod update.zip helps too ?
I've had trouble connecting this SGS4G to my PC.
I got it used, the previous owner fomated the SD card.
Is there any files comes with the stock SD card that affects the connection?
I tried hard and soft reset, still the PC said can't recognize it.
I even hand pick the USB driver in update driver option.
It says "Device cannot start (code 10)" something like that
Any advise will be appreicated!
Look for drivers only maybe different bit than your pc
Try just the sd.card in your.computer
Usb.debuging
Sent from my SGH-T959V using XDA Premium App
patpat09 said:
I've had trouble connecting this SGS4G to my PC.
I got it used, the previous owner fomated the SD card.
Is there any files comes with the stock SD card that affects the connection?
I tried hard and soft reset, still the PC said can't recognize it.
I even hand pick the USB driver in update driver option.
It says "Device cannot start (code 10)" something like that
Any advise will be appreicated!
Click to expand...
Click to collapse
Did you install the drivers found on the "how to root galaxy s4g and deleting fota files" thread in the development forum?
Sent from my SGH-T959V using Tapatalk
One thing you might try, if you haven't yet is a different (original) usb cable. I had this problem and realized I was using a moto usb cable. Just a thought.
golmar88 said:
One thing you might try, if you haven't yet is a different (original) usb cable. I had this problem and realized I was using a moto usb cable. Just a thought.
Click to expand...
Click to collapse
This happened to me also, with a kodak cable.
Sent from my SGH-T959V using Tapatalk
golmar88 said:
One thing you might try, if you haven't yet is a different (original) usb cable. I had this problem and realized I was using a moto usb cable. Just a thought.
Click to expand...
Click to collapse
+2 I had this issue before.
Thankyou for all the answers, I've used 3 different drivers, 1 from Kies, 1 from that Noob root guide, and one from somewhere i forgot.
I also used 3 different micro usb cable, HTC, MOTO, and samsung.
I went to Tmobile, plug in one of their sgs4g in my laptop, works perfectly, so not my laptop and not my cable.
Then i tested, my phone is not rooted yet with root checker, when I install superuser, it gave me an error msg saying that su binary file has a problem, It disappear before i write it down. and it said it copied that su binary on my sd card and tell me to reboot into recovery mode and install it.
I dont know how, and i guess that means a hard reset? I used that vol up+down and power buttom.Then I clicked reinstall packages, big discovery!
I found out that "E;/fail to open.mnt/internal_d/update.zip(No such file or direstory)
Man.... somehow that update.zip isn't there!!!
Anyone could point me to a place to download it? or simple upload me or send one to me email [email protected]
Again thank you for all the comments!
patpat09 said:
Update:
Stock update.zip needed!!
or, does those mod update.zip helps too ?
I've had trouble connecting this SGS4G to my PC.
I got it used, the previous owner fomated the SD card.
Is there any files comes with the stock SD card that affects the connection?
I tried hard and soft reset, still the PC said can't recognize it.
I even hand pick the USB driver in update driver option.
It says "Device cannot start (code 10)" something like that
Any advise will be appreicated!
Click to expand...
Click to collapse
Have you installed the driver's from Samsung yet?
Additionally, when you plug the USB cord in, what happens on your phone? Do icon's show up, up top? Nothing happens?
Have you tried to go into Settings>Applications>Development and made sure USB Debugging is on?
Now if you have tried a standard SGS4G from the TMO Store on your laptop and it worked, you might have gotten a bad deal buying that one used. Something might be jacked up on it.
Additionally, if it's unmodified which it sounds like it is,
Just go to Settings>Privacy>Factory Data Reset.
That will put you back to the original state.
joedeveloper said:
Have you installed the driver's from Samsung yet?
Additionally, when you plug the USB cord in, what happens on your phone? Do icon's show up, up top? Nothing happens?
Have you tried to go into Settings>Applications>Development and made sure USB Debugging is on?
Now if you have tried a standard SGS4G from the TMO Store on your laptop and it worked, you might have gotten a bad deal buying that one used. Something might be jacked up on it.
Additionally, if it's unmodified which it sounds like it is,
Just go to Settings>Privacy>Factory Data Reset.
That will put you back to the original state.
Click to expand...
Click to collapse
No icon show up.
Something is missing from the phone, i did the factory reset both soft and reinstall package in Recovery/ delete all user data, still no help.
When i use root checker, it tells me there is no su binary in system/bin
Superuser created one for me to the SD card, but es file explorer wont copy it into system/bin for me, and in recovery mode, it just say no update.zip exist in internal SD
patpat09 said:
No icon show up.
Something is missing from the phone, i did the factory reset both soft and reinstall package in Recovery/ delete all user data, still no help.
When i use root checker, it tells me there is no su binary in system/bin
Superuser created one for me to the SD card, but es file explorer wont copy it into system/bin for me, and in recovery mode, it just say no update.zip exist in internal SD
Click to expand...
Click to collapse
I'm not sure what would have been deleted off the phone to prevent the USB from working on your computer. Either way, you're kinda out of luck if it won't even connect to the computer.
Only other solution would be to download the stock ROM in the form of update.zip from your phones web browser, save to SD, then reboot into recovery and choose the second option.
The reason why update.zip is missing is because you haven't put it on your SD card. You typically download any zipped ROM, rename it to update.zip and then put it in the root of your SD.
Since you can't connect to the computer you'd have to download from a browser.
joedeveloper said:
I'm not sure what would have been deleted off the phone to prevent the USB from working on your computer. Either way, you're kinda out of luck if it won't even connect to the computer.
Only other solution would be to download the stock ROM in the form of update.zip from your phones web browser, save to SD, then reboot into recovery and choose the second option.
The reason why update.zip is missing is because you haven't put it on your SD card. You typically download any zipped ROM, rename it to update.zip and then put it in the root of your SD.
Since you can't connect to the computer you'd have to download from a browser.
Click to expand...
Click to collapse
Very usefull Info!!
I'm downloading that Stock DEODEXED KC1 now. But it's in Mc5
So, i just zip it right?
Luckily I could still take the sd card out and use a card reader to load stuff on it.
Mainly i want the connection to the pc for rooting.
Moreover, the Root checker says i already have Busybox installed, does it mean, the previous owner might have tried to or did rooted, but unroot it ?
That one doesnt work, so I tried another one which it states its completely stock (T959VUVKC1-REV00-ALL-low-CL933594.tar)
But still both turns out "E: signature verification failed"
any idea?
Hi.
I have just flashed Zeus 6 today all the way from stock. Everything was going great.
After this, I decided to enable lagfix by going to CWM and enabling it from there. After it booted, though, ALL MY SDCARD APPS ARE MISSING. Applications such as Superuser and Android Market. So I then disabled lagfix and it still wasn't working. I can't even use Root Explorer as I don't have Superuser.
I can see the blank icons of the applications that are missing in my apparently drawer, but when I click them, it says "Application is not installed on your phone."
SOMEONE HELP PLEASE!
Sounds like you need to edit your vold.fstab file. Have you checked to see if the sdcard is actually mounted?
Search vold.fstab, you'll find the answer.
Where can I get the vold.fstab file from?
And what do I need to do with it? I can't seem to find anything?
Also, it was working fine when I reflashed Zeus 6. After a while, though, I rebooted my phone after installing all the apps I needed to install. After that, it went back to the problem again.
I am really getting pissed right now with my phone.
[Update] I found a vold.fstab but what do I do with it? And is it 100% sure that this problem came from the unsuccessful mounting of internal SD card? I'm really really ticked off at the moment. I'm sorry.
If you do a search for vold.fstab you'll find what needs to be edited.
I just copied the vold.fstab to the /etc folder and the problem still persists.
Is there any other cause that would've ****ed my phone up?
Also, from my understanding, the vold/fstab fixes external SD card problems and not internal. I don't know, though.
I am really desperate at the moment.
[Edit] ****. After doing the vold.fstab replacement, my external SD card won't even get detected anymore.
The issue that you describe isn't related to the vold.fstab fix. You're correct that making the mmc1 edit is only necessary if you can't see your external sd after making a kernel swap.
When you go to settings / sd card and phone storage, what do you see? Is your 13.03 partition visible? What else is visible?
Edit: And yeah, if you changed the vold.fstab like the others suggested, you need to change the mmc1 in the last line back to mmc2.
Sent from my SAMSUNG-SGH-I997 using Tapatalk 2
Yes. When I look at my USB storage, it says 13.03 total space. I realized that whenever I clear the data and/or reflash, I lose the problem.
But as soon as I start installing stuff, that's when it gets ****ed. I reboot and *boom* all my SD card apps are all just blank icons that when clicked, gives you the error "Application is not installed on your phone"
PS Can someone give me the very default vold.fstab file? This new one ****ed my memory card up and I don't know how to change the mmc1 to mmc2 as I literally just copied and pasted the file into the /etc directory.
Crinkypops said:
Can someone give me the very default vold.fstab file? This new one f**** my memory card up and I don't know how to change the mmc1 to mmc2 as I literally just copied and pasted the file into the /etc directory.
Click to expand...
Click to collapse
You can edit the vold.fstab file by using a program like ES File Explorer or Root Explorer. Using the program, mount the /system/etc directory as read/write. Then, use the built in text editor to change the last line. In this case, for your setup, the last line is supposed to end with mmc2.
To fix your initial problem.: Go ahead and first fix your newly created vold.fstab problem. Then, in Settings / SD card and phone storage, choose format usb storage for the 13.03 gb partition. Let it format, and then go to Settings / Privacy / Factory data reset. Choose "Reset phone".
You'll have to reinstall your apps. Let us know if things are back to normal after doing this. If this doesn't get it, I have another step for you to try.
I have fixed the external SD Card issue. Thanks so much!
I just did the Data reset and currently reinstalling apps and report what happens.
I will keep you posted
Okay so I just reinstalled everything and rebooted and it was all perfect.
This happened to me a while ago while I rebooted like twice and then the problem came back.
I will post here ASAP if it comes back again, but so far it's looking good.
In any case, I am just really curious (if your method actually worked). What would have been wrong before that caused the problems? Also, I did wipes in CWM before and the problem was gone as well, but when I installed apps and rebooted, the problem went back again. So what is the difference between restoring from Settings>Privacy as opposed to the Data wipe on CWM?
I love you, man. *no homo*
Crinkypops said:
In any case, I am just really curious (if your method actually worked).
Click to expand...
Click to collapse
Now, hold the bus. If you see and can use your apps, then it worked. What do you mean, "if your method actually worked"?
Also, I hope that after you reboot, that you are giving your phone time to scan the sd cards. Within the first few minutes after the phone boots, apps on the sd card won't be available.
Crinkypops said:
What would have been wrong before that caused the problems?
Click to expand...
Click to collapse
There is no telling, man. No telling at all. Something was screwed up, though, most likely by something you did on your phone.
Crinkypops said:
Also, I did wipes in CWM before and the problem was gone as well, but when I installed apps and rebooted, the problem went back again. So what is the difference between restoring from Settings>Privacy as opposed to the Data wipe on CWM?
Click to expand...
Click to collapse
Factory reset just wipes user data / installed programs and puts you back to default. Did you also format the 13.03 gb partition like I recommended?
Try to steer clear of any mods for a few days, until you're sure that it's fixed. And stay away from those porn sites.
I have done everything you have said on the dot. It's working fine at the moment and I've been trying to reboot every once in a while to see if it is set.
Also, the problem started when I tried to enable Voodoo lagfix and that was when it started acting up. Next time I restored, it was when I tried using Voltage Control. I really don't know what the problem was. It is a ***** for sure, though.
I also made /mnt/sdcard/Applications and /mnt/sdcard/Android/Applications. I don't know if these would've made an effect, but it's working fine at the moment.
Lastly, I knew Jizzhut was ****ed
Sent from my SAMSUNG-SGH-I997 using xda premium
I have a problem with a goophone i5. First I had problems with it not having a signal but that got solved. Now a second problem came up. I plugged the phone in the laptop, clicked on 'turn on usb', after a while I clicked the 'turn off usb' on the phone. It was off, I unplugged and then it gave a warning "not safely removed, sd damaged", while it was safely removed! Now I can't do anything with it like download apps to it etc. It keeps giving that memory is full. So I assume the 8GB is damaged. I have no idea how to fix it, since I searched already, but it's not like I can take the 8GB out, since it's not removable. Do you know a solution or can you help me? Thank you in advance. When I plug the phone the card is just unrecognisable, therefore I can't format it in anyway :crying:
-Loren
Goophone I5 Lite
pardolorev said:
I have a problem with a goophone i5. First I had problems with it not having a signal but that got solved. Now a second problem came up. I plugged the phone in the laptop, clicked on 'turn on usb', after a while I clicked the 'turn off usb' on the phone. It was off, I unplugged and then it gave a warning "not safely removed, sd damaged", while it was safely removed! Now I can't do anything with it like download apps to it etc. It keeps giving that memory is full. So I assume the 8GB is damaged. I have no idea how to fix it, since I searched already, but it's not like I can take the 8GB out, since it's not removable. Do you know a solution or can you help me? Thank you in advance. When I plug the phone the card is just unrecognisable, therefore I can't format it in anyway :crying:
-Loren
Click to expand...
Click to collapse
Hi mate!
You have there a problem! First of all goophone do not come with 8GB sd card storage. There are 2 different options: the 16GB and 32 GB so, first of all, try to see if you have a real goophone i5.
Then, there is a way to format the SD card. For that you must buy a Screw Driver to open it. After that take out the screws, pull up the display and you will see the sd card inside. Just unplug it, put it on a SD card Adapter and format it on your desktop.
It can give you SD card Damage for a few times, but ignore it and keep formating it until the warning disapears.
For the screw driver you just need to search on ebay. They are very cheap. So all you have to do is to buy one.
Hope this information helped you out.
Regards
Loren can I ask how you got a signal? I just have no service at top of screen. Driving me nuts,
Changed SDCARD
Hi everybody,
Please help me i have a problems with my phone.
I want change my sdcard because now the phone do not recognize my sdcard.
Do you have any instruction for how to open and change the sdcard?
Thanks you .
lychat said:
Hi everybody,
Please help me i have a problems with my phone.
I want change my sdcard because now the phone do not recognize my sdcard.
Do you have any instruction for how to open and change the sdcard?
Thanks you .
Click to expand...
Click to collapse
I`ve got the same problem as you but I don't know how open it...
If you find something, tell me please.
you can first try to re-flash the phone to the original ROM using SP Flash Tool...
Is there a trick to getting the glass to pull up? I've taken out the screws, and put the suction cup down near the home button, but when I pull the glass wants to separate from the bracket that holds it to the phone. There is a tearing sound, like adhesive giving away, and it's fighting me. I don't want to pull any harder for fear that I'm going to damage it.
The reason I'm doing this, is that my SD card has also died, and is no longer recognized by the phone, and I'm wanting to replace it.
AllanBjorklund said:
Is there a trick to getting the glass to pull up? I've taken out the screws, and put the suction cup down near the home button, but when I pull the glass wants to separate from the bracket that holds it to the phone. There is a tearing sound, like adhesive giving away, and it's fighting me. I don't want to pull any harder for fear that I'm going to damage it.
The reason I'm doing this, is that my SD card has also died, and is no longer recognized by the phone, and I'm wanting to replace it.
Click to expand...
Click to collapse
Can't this help? :got this from android website: ((((( I have been fighting this issue for 6 months, off and on. Used to think it was the SD Cards, but have concluded its got to be software. I used different methods to fix it, but over trial and error I think I found the easiest way.
Reboot into Recovery, go to advanced options. Select to mount via USB, then connect to a pc. May take a few times plugging in and out, till you get the sd card drive to appear on your pc. Once you get it, back out of usb mount. Disconnect the cord, and verify your sd card is mounted. I just go into the install a zip from sd card option, if I see files/folders I know its mounted. back up and select the restart device.
This method I stumbled on, in my efforts to just try and get my phone back. After I made the mistake of formating everything includeing the boot, and other internal components. Was pure luck, but it works. I know now it wasn't the format of the SD Card nor the sd card itself, cause I have tried several. Also used to think it was the file system, cause I used to get the cards working again by formating and then pasteing saved files/folders from an earlier back up. Also have factoy reset many times, that doesn't fix it, and reflashing a ROM sometimes does appear to work, but I think its because of restucture of the file system during that process. Anyway let me know if this helped you.))))
I have same problem with SD card, but I think it is not really broke but rather software problem.
I want to fix problem without removing screen or anything, can anyone help?
I have the Chinese recovery installed.
DaltonMaltese said:
Can't this help? :got this from android website: ((((( I have been fighting this issue for 6 months, off and on. Used to think it was the SD Cards, but have concluded its got to be software. I used different methods to fix it, but over trial and error I think I found the easiest way.
Reboot into Recovery, go to advanced options. Select to mount via USB, then connect to a pc. May take a few times plugging in and out, till you get the sd card drive to appear on your pc. Once you get it, back out of usb mount. Disconnect the cord, and verify your sd card is mounted. I just go into the install a zip from sd card option, if I see files/folders I know its mounted. back up and select the restart device.
This method I stumbled on, in my efforts to just try and get my phone back. After I made the mistake of formating everything includeing the boot, and other internal components. Was pure luck, but it works. I know now it wasn't the format of the SD Card nor the sd card itself, cause I have tried several. Also used to think it was the file system, cause I used to get the cards working again by formating and then pasteing saved files/folders from an earlier back up. Also have factoy reset many times, that doesn't fix it, and reflashing a ROM sometimes does appear to work, but I think its because of restucture of the file system during that process. Anyway let me know if this helped you.))))
Click to expand...
Click to collapse
Thanks for the suggestion. Unfortunately, it didn't help.
Got exactly the same problem.. and this is what I have found out so far
If you go to mnt folder using programs like root explorer or rom tool box you will notice 2 folder.. 1st called sdcard which is your internal card and sdcard2 which is the external card
under scard card there are some letters which indicate the permission level it has but under sdcard2 it only shows -----, I manually changed the permission for sdcard 2 (normally long click on the folder name and select permission from the menu) once I done that the external sdcard started to work fine, however when I reboot the phone the sdcard2 lose the permission again
Also, I contacted the guy who I bought the phone from (efit) who told me to open the phone and take the sdcard out and then put it in again and that should make it work, I managed to remove the screen off (not really sure but I think the 2 screws beside the lightning connector is for decoration only).. as you can see from the phone there is no way to access the sd card (unless I did something wrong here)
I contacted efit asking him for some instructions on how to open the phone but I couldn't find the sd card and now he is telling because I opened the phone myself I lost the warranty... what a scum bag !!!
tried the mount to usb thing but that didn't work..
hopefully will find a solution soon
Thanks for this, I almost opened my phone for nothing.
I went to a store to get it open but one of the screws would not come lose, so they didn't try further.
Stupid problem with SD, hope someone will find solution soon.
But you managed to get it working until reboot?
With my phone in mnt folder: sdcard has no permissions and sdcard2 has ---rwxr-x as permission.
What should I change there?
Thanks
ciao
alduleimi said:
Got exactly the same problem.. and this is what I have found out so far
If you go to mnt folder using programs like root explorer or rom tool box you will notice 2 folder.. 1st called sdcard which is your internal card and sdcard2 which is the external card
under scard card there are some letters which indicate the permission level it has but under sdcard2 it only shows -----, I manually changed the permission for sdcard 2 (normally long click on the folder name and select permission from the menu) once I done that the external sdcard started to work fine, however when I reboot the phone the sdcard2 lose the permission again
Also, I contacted the guy who I bought the phone from (efit) who told me to open the phone and take the sdcard out and then put it in again and that should make it work, I managed to remove the screen off (not really sure but I think the 2 screws beside the lightning connector is for decoration only).. as you can see from the phone there is no way to access the sd card (unless I did something wrong here)
I contacted efit asking him for some instructions on how to open the phone but I couldn't find the sd card and now he is telling because I opened the phone myself I lost the warranty... what a scum bag !!!
tried the mount to usb thing but that didn't work..
hopefully will find a solution soon
Click to expand...
Click to collapse
DaltonMaltese said:
Thanks for this, I almost opened my phone for nothing.
I went to a store to get it open but one of the screws would not come lose, so they didn't try further.
Stupid problem with SD, hope someone will find solution soon.
But you managed to get it working until reboot?
With my phone in mnt folder: sdcard has no permissions and sdcard2 has ---rwxr-x as permission.
What should I change there?
Thanks
ciao
Click to expand...
Click to collapse
Do you have manuxo rom or pure ICS installed on the phone because I've noticed that with manuxo rom sdcard2 have no permission but with pure ICS sdcard is the one with no permission.. which I thought it's a bit strange
I have asked before in this forum if anyone with working sdcard to share what permission they have but no one answered !
alduleimi said:
Do you have manuxo rom or pure ICS installed on the phone because I've noticed that with manuxo rom sdcard2 have no permission but with pure ICS sdcard is the one with no permission.. which I thought it's a bit strange
I have asked before in this forum if anyone with working sdcard to share what permission they have but no one answered !
Click to expand...
Click to collapse
I Installed the Manuxo rom v1.28, sd card problem happened week later.
I installed like viber, skype, whatsapp, facebook, soundcloud, simpsons tapped out, angry birds and all that stuff on phone, transferred to sd.
And just all of a sudden, when phone was lying there, it gave error, I rebooted and I lost everything..
But I can still see the fotos on sd card2 through file explorer. Weird stuff.
OK, let's wait for answers of other users I guess.
I also mailed to androidsale what to do, he said try to pull it out and try it a few times, maybe not good connected with sd slot pin, but I can't believe that because phone still finds SD in ROM TOOL lite.
Thanks for your time and effort in this problem!!
vnman said:
you can first try to re-flash the phone to the original ROM using SP Flash Tool...
Click to expand...
Click to collapse
Can you tell me how to do this?
Getting desperate...
Thanks
Hello, I have the same problem with my goophone i5 v88 I can't mount the sd card (16GB)
I have try to remove my screen but I have the same problem I can't found the sd card (just my sim card...)
Adb shell
you can connect the phone to pc and use adb available with mtk droid tools to force format the sdcard.
Adb shell
Fdisk (search google for how to use fdisk)
If the phone is rooted and has cwm you can format sdcard via cwm.
vnman said:
you can connect the phone to pc and use adb available with mtk droid tools to force format the sdcard.
Adb shell
Fdisk (search google for how to use fdisk)
If the phone is rooted and has cwm you can format sdcard via cwm.
Click to expand...
Click to collapse
Thank you very much for the response!!
But I am a noob and don''t know how to do it all, first adb is installed and made available.
Then I installed mtk droid tools. It gives this in info :Free space: system- 251M; data- 153M; sdcard2- 1G; C:\ 75544M
But I don't know how to format now.
Do I have to enter a command in the adb terminal?
Do I have to combine Fdisk and adb shell?
I's not rooted cwm with me, its the chinese recovery from Mayiaandjay from youtube.
Many thanx for the help, almost was going to use it as a picture frame
I do not have access to my PC right now but...
On the right of MTK Droid Tools there are 3 buttons "Root" "ADB Terminal" "Reboot"
Root the phone by pressing "Root", and follow instructions...
Pres "ADB Terminal" to enter Windows command shell, type "adb shell" (without the quotes) to enter the phone shell. Next type fdisk then "enter" and see what comes up...
type "mount" also to find out where your sdcard mounted...
Then search with Google for how to format sdcard...
vnman said:
I do not have access to my PC right now but...
On the right of MTK Droid Tools there are 3 buttons "Root" "ADB Terminal" "Reboot"
Root the phone by pressing "Root", and follow instructions...
Pres "ADB Terminal" to enter Windows command shell, type "adb shell" (without the quotes) to enter the phone shell. Next type fdisk then "enter" and see what comes up...
type "mount" also to find out where your sdcard mounted...
Then search with Google for how to format sdcard...
Click to expand...
Click to collapse
Ok, great, but I can't find the root Button on MTK :/ .
Guess it's alreay rooted..
I'm now in adb shell but where do I check mount usb.
Also my sdcard is not recognised by windows so how can I format?
Thanks and sorry for my noobness
DaltonMaltese said:
Ok, great, but I can't find the root Button on MTK :/ .
Guess it's alreay rooted..
I'm now in adb shell but where do I check mount usb.
Also my sdcard is not recognised by windows so how can I format?
Thanks and sorry for my noobness
Click to expand...
Click to collapse
This is where I got.:
How can I mount or unmount the SD Card using ADB?
The sdcard can be umounted by using the umount command.
unmount /mtn/sdcard/.android_secure
how can it be remounted again :
mount /mnt/sdcard/.android_secure
.
Type mount sdcard next to the "#" sign & press enter...
You will need to know the mount point also if you intend to mount the external card.
As an example:
su mount -o bind /mnt/emmc /sdcard/external_sd
.....................
Like this? And I need to write sdcard2 instead of sdcard I guess?
or this:
First, on your phone, go into Home -> Settings -> SD card & phone storage, then click on "Unmount SD card"
Then, in your shell, do the following.
Code:
adb shell
mkfs.vfat /dev/block//vold/179:1
Then go back to the phone and mount the SD card again. Of course, it would probably be easier to just click "Format SD card," rather than going through adb.
.....
Difficult, don't want to brick my phone..
Many thanks
Please help I am new to this stuff and yesterday I got my phone to cm 10.1 but I realized the .zip from the thread was wrong and now i have 4.2.1 running on my phone but 4.3 gapps and because of that my phones keyboard wont work. Also I cant flash new gapps because it doesn't let me install from my external sd and i haven't found a way to connect my phone to my computer.
Can someone please help me?
Tell me ways I can connect to my pc?
charminster said:
Please help I am new to this stuff and yesterday I got my phone to cm 10.1 but I realized the .zip from the thread was wrong and now i have 4.2.1 running on my phone but 4.3 gapps and because of that my phones keyboard wont work. Also I cant flash new gapps because it doesn't let me install from my external sd and i haven't found a way to connect my phone to my computer.
Can someone please help me?
Tell me ways I can connect to my pc?
Click to expand...
Click to collapse
You can't just... Plug it in to your PC? Don't you have a USB cable?
Connor Baker
No it doesn't connect to my computer. Even tried with other computers and wires
charminster said:
No it doesn't connect to my computer. Even tried with other computers and wires
Click to expand...
Click to collapse
If you cannot turn developer mode on and use ADB push, then, you should be able to in CWM.
Failing that, does Google Play work?
If so, install (from your PC via Google Play page) WiFi File Transfer Pro, fire up an FTP session and push the needed GApps over.
And if all else fails...
ODIN back to stock.
I really don't get it
Can you explain this in detail?
charminster said:
I really don't get it
Can you explain this in detail?
Click to expand...
Click to collapse
Sure thing.
ADB is the debug program for Android. You can use it specifically to push files to the device. But it is not turned on on the device by default. You will need to go into developer options under settings and turn USB debugging on (if Developer Options is not there, go into About Phone and tap Build Number 7 or 8 times tom unlock the feature).
For this to work, you will need a linux PC with an ADB binary (if using Debian/Ubuntu, can "apt-get install adb", then run adb as superuser or sudo) or a windows computer with adbsetup installed. The latter will install the program to C:\adb. So open a command prompt and (with the device plugged in and developer options turned on) type:
Code:
c:
cd \adb
adb devices
You should get a listing of your device, raring to go. If so, great! Copy the the appropriate Gapps package to C:\ADB and type:
Code:
adb push gapps-4.2.zip gapps-4.2.zip
...or whatever the filename is called (there twice as it needs the local and remote file name).
So if that works, can reboot into recovery (CWM) via the three finger salute (turn device off fully, wait a few seconds, hold down both volume buttons while pressing the power button), wipe dalvik cache, and flash the right GApps.
Another option is if you can add Google Play apps to your device. Don't imagine, but if it is possible, fire up your computer and log into your Google Play account. Search for "WiFi File Transfer Pro" and install. With a Wifi connection on the device, it should download and install. If it doesn't, try the scorched earth option below. If it does install, open Wifi File Transfer Pro, turn on FTP server, and keep note of the IP address and Port (Will be noted as IPort). Open or install an FTP client like FileZilla on your PC, and open a connection using that IP address and Port. Transfer the Gapps package over to the device, in the root folder. Then like above, reboot into recovery and wipe dalvik, flash gapps.
The last option, the scorched earth method, is to bring everything back to stock, mind you with root and CWM. Pick option D from the above link (previous post). Download and install adbsetup for the drivers. Option D download will come with a program called ODIN, and that link will have detailed instructions (download and extract the files, open ODIN, put the phone into download mode by turning the device off, hold down both volume buttons while inserting the MicroUSB cable, place the extracted files inthe right sections of ODIN, and flash away).
Hope this helps.
Ok one of my main problems is that I can't use keyboard...which means no internet because I can't type any passwords
And the other big thing is that none of my computers connect toy phone even with USB debugging on from setting and even in recovery
I was wondering if I get a connection with no password will I be update from the phone because there is an option to do so.
charminster said:
Ok one of my main problems is that I can't use keyboard...which means no internet because I can't type any passwords
And the other big thing is that none of my computers connect toy phone even with USB debugging on from setting and even in recovery
I was wondering if I get a connection with no password will I be update from the phone because there is an option to do so.
Click to expand...
Click to collapse
Because Google Play is part of Gapps, there is no guarantee that will work either to update. If you can find an unsecured network (or temporarily turn off WPA on your router), you can test this, but at this point, I would be doing the scorched earth method. You would only be going back to Gingerbread, and however you play your cards (whether you disable lagfix or flash ICS as an intermediary), you would only be one or two flashes away from a functional Jellybean.
Ok my phone doesnt connect with usb ive tried several different times.
I did the adb method everything was fine except i didnt get the device list ,it was empty.
So if it cant connect how will i connect it to my computer to use odin?
Ps. I did download the drivers
charminster said:
Ok my phone doesnt connect with usb ive tried several different times.
I did the adb method everything was fine except i didnt get the device list ,it was empty.
So if it cant connect how will i connect it to my computer to use odin?
Ps. I did download the drivers
Click to expand...
Click to collapse
True enough. Lets try this (as I just thought about it via some other weird, more convoluted way). CM 10.1 comes with a file manager right? Download the 4.2 Gapps onto your mcroSD card, insert it into your device. Fire up the file manager. Copy the Gapps file from the external SD card to the internal card, root folder (where the offending Gapps lies). Reboot into ClockworkMod and wipe Dalvik and install the appropriate zip.
If this does not work, my more convoluted way wouldn't either (search and download "wifi file transfer pro apk" to SD, open with file manager, install, follow the rest of above option 2), and would be out of options except getting your hardware fixed (as it sounds like your device not connecting via USB is a hardware issue).
Ive tried with micro sd before and it hasnt worked
The thing is that All of this stopped working after the update and the thing that i disliked the most was that when i was getting the update it said jb 4.2 gapps but proved wrong
:crying:
charminster said:
Ive tried with micro sd before and it hasnt worked
Click to expand...
Click to collapse
You tried mounting the microSD with the proper Gapps, and copying it with CM's File Manager (to the internal disk to be picked up by CWM later)? Just being clear, and making sure you are not talking about trying to install a zip directly from the MicroSD with CWM (as mentioned, and ruled out before). Because these are two completely different things. Is the MicroSD readable at all on your device? Is it formatted properly (FAT32, or even Ext2/3/4, but not NTFS)?
Can you explain the formatting stuff?
charminster said:
Can you explain the formatting stuff?
Click to expand...
Click to collapse
Sure. Insert the microSD into your computer, and open up Windows Explorer. There will be a new drive that appears. Right click on that removable drive, and select Properties. Confirm the File System. If it is FAT32, you are okay. If it is NTFS, or exFAT, you will need to format (as the Infuse will not recognize these formats). Press Cancel.
Before beginning, make a backup of the MicroSD card, as we are going to wipe and start from scratch. Then, right click on the removable drive again (and only this drive, or you will cause damage to your computer) and select Format. Change the file system to FAT32. If this is not an option, find and download a disk utility that will (I'm not familiar with them, but google "removable storage format fat32 download" for one). Press start, and wait a few minutes. When done, you can reload your files on the drive (restore your backup), and try inserting it in your Infuse again.
Hope this helps.
I followed all your steps bit the phone still doesnt read it i opened setting..storage..mount external sd
But it wasnt letting me and the same thing trying through recoveryCWM
charminster said:
I followed all your steps bit the phone still doesnt read it i opened setting..storage..mount external sd
But it wasnt letting me and the same thing trying through recoveryCWM
Click to expand...
Click to collapse
Probably not, IIRC external SD did not work in CWM for the Infuse. But re-read post #10, what I'm suggesting is getting CWM to read the proper Gapps from the internal card, but placing it there with CyanogenMod's file manager.
CM 10.1 comes with a file manager right? Download the 4.2 Gapps onto your mcroSD card, insert it into your device. Fire up the file manager. Copy the Gapps file from the external SD card to the internal card, root folder (where the offending Gapps lies). Reboot into ClockworkMod and wipe Dalvik and install the appropriate zip.
Click to expand...
Click to collapse
I cant get it there because i cant do anything with the sd card it doesnt show in file manager either
charminster said:
I cant get it there because i cant do anything with the sd card it doesnt show in file manager either
Click to expand...
Click to collapse
Sorry, I misread your previous post. Thanks for the clarification. What are the details on the microSD card? Make, model, speed, capacity? If it is a 64+ GB card, it would spell problems as the Infuse was never rated for a capacity that large.
It's a sandisk 16 gb
Sd card
Fat32
No reason why the microSD won't work in the Infuse.
If you have a Bluetooth keyboard you can borrow - or try buying (not sure if it will connect) - but if you can get your hands on one, you could use that (never had to use one so I don't know how they connect) to download the right GApps package to your phone (via the built-in browser).
I'm curious as well, if the speech-to-text works. You could use google now search to find the gapps package ("okay google, xda developers") and browse to the right page. Of course you will need a unsecured network to attempt.
Other than that, unfortunately I'm out of ideas.
So its a long story guys.
I am Iman. And i have a samsung galaxy star pro ( i know its old, but i just need the solution, not advices to buy a new phone)
Yesterday i rooted my samsung galaxy star pro, with pc kingoroot pc software. And it was sucessfully rooted. Today I installed, link2sd, RoesoftRamExpander and FOLDERMOUNT in my phone.
Ok so when i was using folder mount when i opened the app it gave an error type of thing that a faculty error has came and it will have to do something to the sdcard (internal storage sd card) and it also said that i will create a backup as well.
I just clicked ok, and then using folder mount, i didnt found it effective because all the data was in KB's so i uninstalled folder mount. Now when i opened gallery it said that data is low than 100 mb delete some files. I rushed to settings>storage and saw the Phone memory was 4 Gb/4GB full. (my phone even doesnt supports apps2sd so i cant change default storage to ext sd card)
ok so now i opened es file explorer and the sd card was empty. I opened up /device and searched a file called sdcard.backup and it was there, which means that i have the backup. Now how can i restore it please??????????????? I really need to restore it. if theres an app to do it than tell me , i have also gone in foldermount settings but found nothing there. I can install apps, because the apps go to device/system>data
XDA Visitor said:
So its a long story guys.
I am Iman. And i have a samsung galaxy star pro ( i know its old, but i just need the solution, not advices to buy a new phone)
Yesterday i rooted my samsung galaxy star pro, with pc kingoroot pc software. And it was sucessfully rooted. Today I installed, link2sd, RoesoftRamExpander and FOLDERMOUNT in my phone.
Ok so when i was using folder mount when i opened the app it gave an error type of thing that a faculty error has came and it will have to do something to the sdcard (internal storage sd card) and it also said that i will create a backup as well.
I just clicked ok, and then using folder mount, i didnt found it effective because all the data was in KB's so i uninstalled folder mount. Now when i opened gallery it said that data is low than 100 mb delete some files. I rushed to settings>storage and saw the Phone memory was 4 Gb/4GB full. (my phone even doesnt supports apps2sd so i cant change default storage to ext sd card)
ok so now i opened es file explorer and the sd card was empty. I opened up /device and searched a file called sdcard.backup and it was there, which means that i have the backup. Now how can i restore it please??????????????? I really need to restore it. if theres an app to do it than tell me , i have also gone in foldermount settings but found nothing there. I can install apps, because the apps go to device/system>data
Click to expand...
Click to collapse
Hi,
Please post your query here Ask any Question NewbieFriendly with all relevant details, the experts there maybe able to assist you.
Also you may register for XDA account to post and reply in the forum.
-Vatsal