[Q] Rooting issue? - Motorola Atrix 2

So I'm sort of (completely) a noob, and I really know next to nothing about any of this. Just bear that in mind.
I went to root the other day. I downloaded a compressed zip file containing the necessary files to root the Atrix 2 that I found somewhere on the XDA website.
I had my Atrix 2 plugged in, as a camera (PTP), with the USB cable that came with the phone, on all the proper settings, with debugging enabled, and all that good stuff. I am 100% sure that I had it on the correct settings.
I decompressed the file to Desktop, and ran the adb.exe file inside. It looked like it worked because a little window popped up and a bunch of text scrolled through. Then I ran the ROOT.bat file. A window opened that said something along the lines of "dameon not running. starting it now" followed by "dameon started successfully", which, I'm told, is normal. The only issue is that after that, nothing happens. I've waited an hour, even though it shouldn't take nearly that long, and nothing more happens. No more text appears, my phone doesn't restart, nothing.
My friend, who knows a lot more than I do and really knows what he's doing, has sort of been helping me with this. I explained to him step-by-step what I was doing, and he couldn't find a flaw.
I looked briefly online, but I'm not good at finding stuff like this.
Any solutions?
Thanks for your time!

Your PC didn't recognize your phone as an adb device
Use this software to install adb driver
http://adbdriver.com/upload/AdbDriverInstaller.exe

+1 on what @PhoenixNghi said, plus connect your phone as a mass storage device.

Related

[Q] Root process hang?

I've been trying the root method listed here:
http://forum.xda-developers.com/showpost.php?p=19792563&postcount=1
I followed the instructions to the letter, though when in came to selecting a file it never let me choose... only gave me a choice of internal and external SD. It's been 45 minutes that I'm staring at the "Downloading... Do not turn off target!!!" screen and I'm beginning to worry.
Any advice from others who've gone this route would be helpful. Thanks.
Sounds like your in ODIN mode (not recovery.) That doesn't make much sense when it gave you a choice with internal/external, however.
At which point in the steps provided in the linked post did you start to see that "downloading..." screen? Is your device attached to your PC with the data/charging/usb cable? Was it attached when you performed step 4 of the linked thread? If it IS attached, is KIES running? If KIES is running, is it doing anything?
Gary
Thanks for the follow up, Gary. This is all a bit new to me after dumping a rooted Noot Tablet that wasn't cutting it. It sounds like I did slip into Odin mode (?) for I remember seeing some similar mention in a terminal-like text in the top left corner of the screen.
I was able to shut it off, reboot, and all came back normal (sigh of relief). Considering the number of things you mention, I will have to brave the process again, as I can't remember all that was involved.
Couple of notes... I am on a Mac, though I have both Win7 and WinXP-SP3 virtualized. I have been having terrible problems getting Kies to pick up on the tab while in either VMed Win environs. Very on and off, and the Mac ver of Kies sucks! Any advice would be helpful.
Also... will rooting gain me write access to the external SD? As of now, the only file manager that can do this is the native one that came with the tab. I much prefer some the market FMs.

[Q] need help with UnBrickableResurrectorR40

I need some help. I will set up the scenario first. My Cap has had the unbrickmod performed on it about 8 months ago. I had the battery fall out ib the middle of a flash. I was getting the phone /computer "you screwed up a firmware install" animation. I tried to get it cleared up with Odin and now it is black screen no matter what I try. Can't get download, or recovery, and the usb jig won't even get it into download. I am completely unschooled and self taught with pc and phones and I think I have done pretty well. Now, I have taken another big step and after reading up on what to do next, I installed successfully, Ubuntu in my laptop (xp pro)and I can dual o.s. or boot either o.s. individually and everything seems to work fine. I downloaded UnBrickResrectR40, HIBL.zip, and java jre7.0.5. Ihave no clue about Linux or command lines,but after reading a million different claims on how to install these files i was finally able to get the java installed. But, I can't get the unbrickres file to install. I always get an error saying file not found by regex. Now I have copies in downloads,desktop, home, files, and have changed permissions and types(jar,javaw.exe,zip.gz) and still nothing. No forums or help pages help. They all give directions as if you know what you are doing already. They must figure if you got this far you are a tech or a dev, not a noob electrician who can't even type. I need some seriously slow,detailed,step by step,hand holding through this one, if someone has the patience. Back to the phone. The only thing that shows any life in the phone at all is when it is plugged into my laptop. It doesn't show up anywhere but under device manager. It shows under "universal serial bus devices" as, SEC S5PC 110 Test B/D , location 0,device is working properly,driver provider-libusb.org, driver date-7-13-2009,driver version-6.7.7600.16385, not digitally signed. That is it. I need some direction. What do I do now? Hopefully someone feels adventurous.Thanks
khkaiser13 said:
I need some help. I will set up the scenario first. My Cap has had the unbrickmod performed on it about 8 months ago. I had the battery fall out ib the middle of a flash. I was getting the phone /computer "you screwed up a firmware install" animation. I tried to get it cleared up with Odin and now it is black screen no matter what I try. Can't get download, or recovery, and the usb jig won't even get it into download. I am completely unschooled and self taught with pc and phones and I think I have done pretty well. Now, I have taken another big step and after reading up on what to do next, I installed successfully, Ubuntu in my laptop (xp pro)and I can dual o.s. or boot either o.s. individually and everything seems to work fine. I downloaded UnBrickResrectR40, HIBL.zip, and java jre7.0.5. Ihave no clue about Linux or command lines,but after reading a million different claims on how to install these files i was finally able to get the java installed. But, I can't get the unbrickres file to install. I always get an error saying file not found by regex. Now I have copies in downloads,desktop, home, files, and have changed permissions and types(jar,javaw.exe,zip.gz) and still nothing. No forums or help pages help. They all give directions as if you know what you are doing already. They must figure if you got this far you are a tech or a dev, not a noob electrician who can't even type. I need some seriously slow,detailed,step by step,hand holding through this one, if someone has the patience. Back to the phone. The only thing that shows any life in the phone at all is when it is plugged into my laptop. It doesn't show up anywhere but under device manager. It shows under "universal serial bus devices" as, SEC S5PC 110 Test B/D , location 0,device is working properly,driver provider-libusb.org, driver date-7-13-2009,driver version-6.7.7600.16385, not digitally signed. That is it. I need some direction. What do I do now? Hopefully someone feels adventurous.Thanks
Click to expand...
Click to collapse
Have you tried the Windows tool Windows32DriversAndCommandLineApp.zip ?
http://forum.xda-developers.com/showthread.php?t=1242466
Thanks for the advice
Thanks Silvertag, I appreciate the fact that you even read my post. I was running late for work, but wanted to get something on the boards.
I will check out the link you suggested. Much appreciated.

[Q] failing to root

I'm trying to root my tf700, and although I have Unknown Sources checked, and the USB debugging checked, I still get the error that it needs to be turned on. And then I get the daemon is not running message. Is there another way to root my Infinity?
Also, my Build is 9.4.5.21, so I'm thinking of nvflash. The problem is that although I've unlocked the bootloader, I still see I have a firmware update pending. I'm afraid to install the upgrade, lest it moves me to the later build, and thus prevents me from using nvflash.
Can anyone offer some help on my inability to root? And advice on the firmware/nvflash situation? Thanks...
Which root process are you trying to use?
1click root or debugfs?
Coming from the ground up
Thanks for the reply. I'm using the dbugfs.
Reggie777 said:
Thanks for the reply. I'm using the dbugfs.
Click to expand...
Click to collapse
Sometimes switching usb plugs on the PC works.
I know a lot of folks in the forum have said that trying on a different PC also works.
Are you working with Win7 or XP or something different?
It says Daemon isn't running. And then next screen it says Rooting failed. System partition was not found
I'm using Windows 7.
Please excuse the stupid question.. but should the tablet be on a certain screen while this is going on? Or should it be off?
Reggie777 said:
It says Daemon isn't running. And then next screen it says Rooting failed. System partition was not found
I'm using Windows 7.
Please excuse the stupid question.. but should the tablet be on a certain screen while this is going on? Or should it be off?
Click to expand...
Click to collapse
I suggest you re install android SDK. Download from here. Only install packages with android in it (should be 2)
http://developer.android.com/sdk/index.html
Reggie777 said:
It says Daemon isn't running. And then next screen it says Rooting failed. System partition was not found
I'm using Windows 7.
Please excuse the stupid question.. but should the tablet be on a certain screen while this is going on? Or should it be off?
Click to expand...
Click to collapse
Hmmm,
The tab should be on and connected as MTP I believe.
Is the tablet seen when clicking on the computer icon or in explorer?
Also check device manager to see if the tab shows up in there.
If the tab is plugged into a front USB (if using a Desktop PC) try a port on the back if available.
Oops edit!
Did you try downloading and installing the PCSuite from the Asus website?
Thats OK said:
Hmmm,
The tab should be on and connected as MTP I believe.
Is the tablet seen when clicking on the computer icon or in explorer?
Also check device manager to see if the tab shows up in there.
If the tab is plugged into a front USB (if using a Desktop PC) try a port on the back if available.
Oops edit!
Did you try downloading and installing the PCSuite from the Asus website?
Click to expand...
Click to collapse
I did the SDK install.... no difference. It is showing up on the PC. But I have not downloaded the PCSuite from Asus, since I've been afraid of going there, and getting tied up with the Sync issue. I had read that if I had the sync on, they can track the tablet along with reading the info, and even doing some extreme things if they felt I deserved it. I didn't know if I was supposed to register it before I unlocked it. or what. The odd thing is that I have unlocked it successfully.
i've also moved the usb connector to different ports but with the same result. I do notice, that now, it says after saying daemon is not running, that daemon started successfully. But then, it says Rooting Failed.... System Partition could not be found.
Is it possible to install nvFlash on an unlocked device, but one that is not rooted?
Lemme see here...
Ur right clicking the .bat file then running as admin then?
http://androidroot.mobi/t3_nvflash/
...on the mobi blog it just says to be unlocked and have nerves of steel.
I had a nightmare getting the Win 7 drivers to install.
I eventually gave up and used Linux...
Nerves of steel is right. I'm about to try the procedure on another computer. Hmmmm. Is the sync app from Asus relatively safe to use? someone said it worked for them after they installed it.
If I'm sweatin' it now,... can you imagine how I'm a tremblin' with the nvFlash install ahead of me?
My ol' gTablet never gave me this much stress. :highfive:
Reggie777 said:
Nerves of steel is right. I'm about to try the procedure on another computer. Hmmmm. Is the sync app from Asus relatively safe to use? someone said it worked for them after they installed it.
If I'm sweatin' it now,... can you imagine how I'm a tremblin' with the nvFlash install ahead of me?
My ol' gTablet never gave me this much stress. :highfive:
Click to expand...
Click to collapse
Man I know...I was always afraid to do anything at first.
I was pretty afraid of a 500 dollar lesson gone wrong...then one day I said "what the hell man up"
So here I am today a satisfied customer!
I have PC Suite installed, I had registered and unlocked so Big brother Asus had my number from the beginning.
Seems like PC Suite is the only way in certain cases.
Coming from the ground up
Well, it did not work on the second computer... And now, what I get is, daemon does start, and the cursor moves to a new line, and just blinks back at me ... ouch. Didn't I just feel silly waiting for 30 minutes, and nothing happened? Reminded me of the cat that just sits and watches the curtains move. Ah well. So, I am unlocked, but also unrooted. Does anyone happen to know if the one click app works with our Infinity? I getting desperate enough to pay. :crying:
HTTP://forum.xda-developers.com/showthread.php?t=1824713
Was wondering if you had seen this thread...
I was reading thru the debugfs thread and there it was.
Forgot all about it...there's got 2 be an answer.
We need to get you fixed up!
Coming from the ground up
I'm Rooted!
Whew!... Thanks to all who responded and pointed me in the right direction. It was not pretty. I encountered a number of errors. I'll list them below, in case anyone else is having the same problem/s I had.
1. After you choose "1" from the debugfs menu, it ends up saying "Rooting failed. System partition was not found." Check to see if the device is being seen. How you do this is go to the same directory you unzipped the files you downloaded, and start a command line from this directory. The question was how? Press the Shift key, while right clicking on the directory where adb.exe is, and you will get a window with a prompt. This is a very useful window. type "adb devices", and you should see some datafline" and then a code number followed by "device". Naturally, mine was not there. If this is not there, type " adb kill-server" Then "adb device", and hopefully, if the stars align correctly. You will see your device there with it's code. If not, then you have to check the device manager, and check the drivers. To do this... Go to the start box in lower left of window bar, and type "device manager". The file will be listed, click on it. and you should see your device listed. I found it twice.. once by itself using, and again under Portable Devices. I clicked on these, and updated the drivers to the ones in the same directory with the files you unzipped. Hopefully that will work. If it doesn't you might have to uninstall them, and reinstall them.
2. After all that, you still might not get past option 1 in the menu. Possible error, "more than one device found". So, you have to check if anything else is interfering. [I'm not sure if this was the culprit but as soon as I removed my Zunes, I was good to go].
3. And then option 1 gets a little further along and goes off to never never land. So... I moved to option 2, Manual entry of the partition. It warns you to not go into this section if you are not sure. Naturally, I shook off my cold sweat and plunged ahead. The address I used, from another post was "/dev/block/mmcblk0p1", and that seemed to work.
4. Then.... the app got stuck trying to reboot the device. You can check if it is seeing the tablet by the "adb devices" check. If is not, you have to fiddle with the drivers again.
5. Finally, after a number of tries, and a lot of colorful venting... it went through... and I was rooted.
Whew! It was ugly... But finally. :fingers-crossed:
I relate my story to encourage anyone who might be discouraged by the roadblocks. Hang in there, and as they say... "Never Give Up. Never Surrender!"
Now to tackle installing nvFlash. I have my blankie all ready.
AWESOME!
Way to go slugger!
So was another media device "Zunes" plugged up in another port?
You have done well!
It's pretty fulfilling to wind thru all this and come out with a desired result.
Thanx for the low down.
It will mean a lot to others having trouble.
Thumbs raised kiddo!
nvFlash adventures...
Again, thanks to the wonderful support from the wonderful folks here.:highfive:
Just to end on an even higher note, I wanted to add that I was able to install nvFlash, and generate my "Resurrection Files". I don't know if this is allowed on this forum to include a link, but I followed this video
http://www.youtube.com/watch?v=J3ypzUaKxvo&feature=colike
which seemed to anticipate some of the very same roadblocks I encountered. So, now, I can look about that "firmware update" notification that keeps flashing in my bar.
My Infinity adventure continues...

Stock TF700 boot loop, can't turn off device.

Back in June, I turned on my TF700 with the dock attached, it started as usual.. I turned on my wifi, opened up my browser to look up plane tickets, then it restarted. I didn't think much of it, and when it loaded up again, I tried to look up tickets again, and it did the same thing. I gave up, closed it and zipped it up in my sleeve. It was a few hours before I got home, and when I took it out of the sleeve, it was quite warm! It was constantly rebooting and there was no way to turn if off. I left it out of the sleeve and let the battery die. I didn't use my tablet for a few days, and when I went to turn it on again, the same thing happened, and has been happening ever since. I have tried to start the tablet while connected to the dock, the wall charger, without the dock, with wifi on, with wifi off, etc. The tablet gets to the lock screen, I unlock it, and I only have about 10 seconds before it freezes and restarts. I am unable to turn off the device, because when I choose "shut down" from the menu, it shows that it's in the process of slowing down, but then the spinning wheel freezes and it vibrates and restarts before it can fully shut itself off. Since I can boot into android, I thought it was something that the tablet is trying to run upon startup that was causing problems. I was able to quickly get to settings and apps, to uninstall several apps, but nothing has helped. I used to have a task manager widget on the home screen, and uninstalled that too.
After doing research into the problem, I found that most people who have boot loop issues or constant restarting, are rooted and are experiencing difficulties with a new ROM. I am 100% stock. I have held down power and volume down. It gives me RCK, Android and Wipe. I have tried cold booting into android, but the same restart loop after 10 seconds occurs. I thought it might have been a bad firmware update that went through unbeknownst to me. So I downloaded the firmware file from ASUS, renamed and flashed it sucessfully. However, no change in the reboot problem. I am running the following version: US-epad-10.6.1.14.8-20130514. I know there's a new version out, but wasn't sure if I should try to flash that yet.
I am willing to try absolutely anything to fix the problem, with the EXCEPTION of wiping data. I know that would be the easy way to go, but I have photos and videos from my best friend's engagement and they are the only copies. If I am able to get my tablet to be stable enough to copy those off, I would then be willing to wipe and have a fresh start. I have tried connecting my tablet to my computer, and it is recognized. After it boots up and I unlock it, then the tablet begins to mount (I'm on windows 8). However, I still only have 10 seconds or so before the tablet restarts, and that's not enough time to even view the folders from the tablet.
It's been 3 months since this started, and I have done lots of research and tried lots of things, but nothing has helped yet. Since I haven't delved too deeply into the dev side of android (I've only rooted my S3) there is lots of android speak that I don't understand fully, or have experience with, like ADB. If someone is willing to offer suggestions on what to try, I am very good at following directions! Thank you for any help or leads you can offer.
Wow - you're in a difficult situation...
You being on stock I can only imagine the bootloop is caused by something you installed.
So if you can access settings and are able to uninstall apps, just keep doing it until you are back to the original stock setup.
Are you sure the files you are trying to save are still on the SD card? Don't know how you flashed 10.6.1.14.8, but flashing a complete firmware package ususally erases /data - although your persisiting bootloop indicates it didn't...... if the bootloop is caused by an app. And I can't imagine what else would cause it.
You could try to do a factory reset in Backup&Restore but you will loose the contents of your /data partition...
You can flash the 10.6.1.14.10 firmware file, but most likely you will also loose your data.
The only way I can think of to replace your bootloader and firmware without data loss is if you try to find a copy of the 10.6.1.14.10 dlpkgfile. That is the OTA update file Asus pushes out to users. It's a patch file, meaning it only replaces/updates new files and leaves everything else alone.
If you find the dlpkgfile on some forum you would have to place it into your /cache directory and reboot - and I don't know if you can copy it to your tablet before it bootloops again.
Unfortunately the reason for your bootloop is probably an app on the same partiton with the data you don't want to loose. Unless you manage to uninstall the culprit I don't see much hope....
Good luck!
Sent from my ASUS Transformer Pad TF700T using Tapatalk 4
Try getting adb access, this should allow us to diagnose the problem you are experiencing.
Tablet side: go to settings, developer options (if it is not visible, tap the build number 7 times), enable USB debugging
Computer side: no idea, they say Windows 8 is a bit tricky to get the drivers installed correctly.
When you have adb running, do "adb pull /proc/last_kmsg" and post the downloaded file - it should contain valuable info about your reboots.
_that6042401 said:
Try getting adb access, this should allow us to diagnose the problem you are experiencing.
Tablet side: go to settings, developer options (if it is not visible, tap the build number 7 times), enable USB debugging
Computer side: no idea, they say Windows 8 is a bit tricky to get the drivers installed correctly.
When you have adb running, do "adb pull /proc/last_kmsg" and post the downloaded file - it should contain valuable info about your reboots.
Click to expand...
Click to collapse
He's bootlooping..... How does he go into settings and turn on USB debugging?
I think the best option maybe to flash a stock Asus ROM from their site but that will wipe all data including those photos......
zanadoo22 said:
Back in June, I turned on my TF700 with the dock attached, it started as usual.. I turned on my wifi, opened up my browser to look up plane tickets, then it restarted. I didn't think much of it, and when it loaded up again, I tried to look up tickets again, and it did the same thing. I gave up, closed it and zipped it up in my sleeve. It was a few hours before I got home, and when I took it out of the sleeve, it was quite warm! It was constantly rebooting and there was no way to turn if off. I left it out of the sleeve and let the battery die. I didn't use my tablet for a few days, and when I went to turn it on again, the same thing happened, and has been happening ever since. I have tried to start the tablet while connected to the dock, the wall charger, without the dock, with wifi on, with wifi off, etc. The tablet gets to the lock screen, I unlock it, and I only have about 10 seconds before it freezes and restarts. I am unable to turn off the device, because when I choose "shut down" from the menu, it shows that it's in the process of slowing down, but then the spinning wheel freezes and it vibrates and restarts before it can fully shut itself off. Since I can boot into android, I thought it was something that the tablet is trying to run upon startup that was causing problems. I was able to quickly get to settings and apps, to uninstall several apps, but nothing has helped. I used to have a task manager widget on the home screen, and uninstalled that too.
After doing research into the problem, I found that most people who have boot loop issues or constant restarting, are rooted and are experiencing difficulties with a new ROM. I am 100% stock. I have held down power and volume down. It gives me RCK, Android and Wipe. I have tried cold booting into android, but the same restart loop after 10 seconds occurs. I thought it might have been a bad firmware update that went through unbeknownst to me. So I downloaded the firmware file from ASUS, renamed and flashed it sucessfully. However, no change in the reboot problem. I am running the following version: US-epad-10.6.1.14.8-20130514. I know there's a new version out, but wasn't sure if I should try to flash that yet.
I am willing to try absolutely anything to fix the problem, with the EXCEPTION of wiping data. I know that would be the easy way to go, but I have photos and videos from my best friend's engagement and they are the only copies. If I am able to get my tablet to be stable enough to copy those off, I would then be willing to wipe and have a fresh start. I have tried connecting my tablet to my computer, and it is recognized. After it boots up and I unlock it, then the tablet begins to mount (I'm on windows 8). However, I still only have 10 seconds or so before the tablet restarts, and that's not enough time to even view the folders from the tablet.
It's been 3 months since this started, and I have done lots of research and tried lots of things, but nothing has helped yet. Since I haven't delved too deeply into the dev side of android (I've only rooted my S3) there is lots of android speak that I don't understand fully, or have experience with, like ADB. If someone is willing to offer suggestions on what to try, I am very good at following directions! Thank you for any help or leads you can offer.
Click to expand...
Click to collapse
I have not use this method but you could try.
You need a boot OS tool on your external sd and run it from your external sd so you can access to your internal sd to copy files from there. You can search on the internet and you should find more information on how to use them depending on what boot os you are using.. Good luck.
zanadoo22 said:
and I only have about 10 seconds before it freezes and restarts.
Click to expand...
Click to collapse
sbdags said:
He's bootlooping..... How does he go into settings and turn on USB debugging?
Click to expand...
Click to collapse
Preferably FAST.
---------- Post added at 07:51 PM ---------- Previous post was at 07:51 PM ----------
LetMeKnow said:
You need a boot OS tool on your external sd
Click to expand...
Click to collapse
What is a boot OS tool?
_that said:
Try getting adb access, this should allow us to diagnose the problem you are experiencing.
Tablet side: go to settings, developer options (if it is not visible, tap the build number 7 times), enable USB debugging
Computer side: no idea, they say Windows 8 is a bit tricky to get the drivers installed correctly.
When you have adb running, do "adb pull /proc/last_kmsg" and post the downloaded file - it should contain valuable info about your reboots.
Click to expand...
Click to collapse
I was actually able to get usb debugging turned on. It took me quite a few tries, but I did it!
I've never used adb, but here's what I've done so far.. I downloaded the Android SDK and ASUS Pad PC Suite (which contains Asus Sync).
I was able to use the command prompt to navigate to the platform-tools folder and open adb, however when I type in adb devices, it doesn't recognize my device. What steps to do I take from here to be able to use adb to see my device, so I can pull the file to diagnose what's going on? How do I know if I have the right drivers installed so my computer can see my tablet? All I did was install the asus suite. Do I need to do anything further on that end?
zanadoo22 said:
I was actually able to get usb debugging turned on. It took me quite a few tries, but I did it!
I've never used adb, but here's what I've done so far.. I downloaded the Android SDK and ASUS Pad PC Suite (which contains Asus Sync).
I was able to use the command prompt to navigate to the platform-tools folder and open adb, however when I type in adb devices, it doesn't recognize my device. What steps to do I take from here to be able to use adb to see my device, so I can pull the file to diagnose what's going on? How do I know if I have the right drivers installed so my computer can see my tablet? All I did was install the asus suite. Do I need to do anything further on that end?
Click to expand...
Click to collapse
What Windows version do you have on your PC?
You can check your drivers in Device Manager. Open it, look for your tablet under Portable Devices and check if the driver has a yellow exclamation mark next to it. You should be able to update/install/uninstall the driver from here.
Try to find out if there is a setting in your Windows version to only allow Microsoft signed drivers and disable it.
Sent from my DROID4 using Tapatalk 2

Portable ADB ALL [ANDROID] devices

Have you ever needed to use ADB at a work PC or a location you could not "install" applications?
Unzip the attached file and click the RunMe.bat
I have tested this pulling logs, pushing/pulling files, flashing recovery, roms, and anything else I could think of.
I tested it on the M8 stock rom 5.0.2 but this is a generic file so it should be fine on most if not all android devices.
The idea came when I was at work and looking for a solution for a problem I had. I could not install anything on my work PC, so this came in handy, the only problem is that it was outdated, or seemed outdated for my needs.
find the zip file here https://www.androidfilehost.com/?fid=24052804347791558
This topic has been covered but is very outdated. I only found information from 2011 and 2013. The included information has since been updated by Google. I found it and included it, re-zipped it and now it is here for you to enjoy.
Thanks
to @Kickface, (where I first found this solution) wherever you went and any others who have created a truly portable (not minimal) solution to using ADB without installing anything.
dopy25 said:
Have you ever needed to use ADB at a work PC or a location you could not "install" applications?
Unzip the attached file and click the RunMe.bat
I have tested this pulling logs, pushing/pulling files, flashing recovery, roms, and anything else I could think of.
I tested it on the M8 stock rom 5.0.2 but this is a generic file so it should be fine on most if not all android devices.
The idea came when I was at work and looking for a solution for a problem I had. I could not install anything on my work PC, so this came in handy, the only problem is that it was outdated, or seemed outdated for my needs.
find the zip file here https://www.androidfilehost.com/?fid=24052804347791558
This topic has been covered but is very outdated. I only found information from 2011 and 2013. The included information has since been updated by Google. I found it and included it, re-zipped it and now it is here for you to enjoy.
Thanks
to @Kickface, (where I first found this solution) wherever you went and any others who have created a truly portable (not minimal) solution to using ADB without installing anything.
Click to expand...
Click to collapse
OMGGGGG this just may solve all my problems I had my personal PC but couldn't get HTC sync manager to connect...The only other PC's I have access to are either desktop @ office or my work "administrator password protected" laptop... TY, TY, TY in advance if this works!!!!
MAJOR PROBLEM!!!! Plz tell me someone can help??
M-FayeHTC said:
OMGGGGG this just may solve all my problems I had my personal PC but couldn't get HTC sync manager to connect...The only other PC's I have access to are either desktop @ office or my work "administrator password protected" laptop... TY, TY, TY in advance if this works!!!!
Click to expand...
Click to collapse
I know this is totally off topic, I'll report myself for it later....
So, I installed the zip file onto my work PC, a DELL Inspiron laptop running Windows 7 professional (I really cannot get too much more info about it now) sorry. My nooby butt just went and downloaded the file not checking the MD5 :crying: Totally a dumb thing a NOOBY would do. It started to get late & I had to get ready to go to work. I know I had the command prompt screen (Black box) running and I then left the computer. 8 hr's later I come home from work and the computer is locked as normal, I to proceed entering Ctrl+Alt+Delete combination as usual & NOTHING (panic setting in)!! I was concerned since it was frozen from something I done, also I didn't want to loose all the work I gathered that night prior (is the very least of my worries now)... I took out the battery to reset the computer, again like a dummy, I started Windows normally ignoring the other "safe mode, etc" options. I click on windows Chrome, NOTHING! Not even an option to open the program/app. Okay, I'm really panicking now WTH did I do??? I knew I did something wrong, so I reset the computer by battery again, put it in "Safe Mode" which did absolutely nothing as I couldn't "open desktop gadgets in safe mode". Now, I restarted the computer from the start menu... Started up completely fine, I have access to everything EXCEPT Chrome, Internet Explorer, etc. anything that is browser related has the administrator shield on the icon. However, I still cannot even click on the icon to run as an administrator even if I had the password!?!?
Is there any possible hope to uninstall that file and just maybe it'll go back to normal??? I cannot re-install Chrome or Internet Explorer due to the darn administrator rights!!!
I've searched to the ends of the earth since last night trying to find a solution, this is my last ditch effort resort for any possible suggestions to point me in the right direction. Luckily my friend was kind enough to lend me his laptop and my phone is in proper working order:angel: If I tell my IT guy what happened, I'll be in huge trouble, going on the 2nd laptop destroyed, 1st time really wasn't my fault, just saying so u don't think I'm continuously reckless.
Any help as always is greatly appreciated! Hoping someone has had this happen maybe:fingers-crossed: and just a slight point in the right direction (link, website, specific thread on forum) would b awesome?? Again, apologies on the "off-topic" content, I don't know what else to do & I feel as though XDA is THE ABSOLUTE BEST forum site for any Android help, apps, devs research, roms, etc. Thx in Advance!!
M-FayeHTC said:
I know this is totally off topic, I'll report myself for it later....
So, I installed the zip file onto my work PC, a DELL Inspiron laptop running Windows 7 professional (I really cannot get too much more info about it now) sorry. My nooby butt just went and downloaded the file not checking the MD5 :crying: Totally a dumb thing a NOOBY would do. It started to get late & I had to get ready to go to work. I know I had the command prompt screen (Black box) running and I then left the computer. 8 hr's later I come home from work and the computer is locked as normal, I to proceed entering Ctrl+Alt+Delete combination as usual & NOTHING (panic setting in)!! I was concerned since it was frozen from something I done, also I didn't want to loose all the work I gathered that night prior (is the very least of my worries now)... I took out the battery to reset the computer, again like a dummy, I started Windows normally ignoring the other "safe mode, etc" options. I click on windows Chrome, NOTHING! Not even an option to open the program/app. Okay, I'm really panicking now WTH did I do??? I knew I did something wrong, so I reset the computer by battery again, put it in "Safe Mode" which did absolutely nothing as I couldn't "open desktop gadgets in safe mode". Now, I restarted the computer from the start menu... Started up completely fine, I have access to everything EXCEPT Chrome, Internet Explorer, etc. anything that is browser related has the administrator shield on the icon. However, I still cannot even click on the icon to run as an administrator even if I had the password!?!?
Is there any possible hope to uninstall that file and just maybe it'll go back to normal??? I cannot re-install Chrome or Internet Explorer due to the darn administrator rights!!!
I've searched to the ends of the earth since last night trying to find a solution, this is my last ditch effort resort for any possible suggestions to point me in the right direction. Luckily my friend was kind enough to lend me his laptop and my phone is in proper working order:angel: If I tell my IT guy what happened, I'll be in huge trouble, going on the 2nd laptop destroyed, 1st time really wasn't my fault, just saying so u don't think I'm continuously reckless.
Any help as always is greatly appreciated! Hoping someone has had this happen maybe:fingers-crossed: and just a slight point in the right direction (link, website, specific thread on forum) would b awesome?? Again, apologies on the "off-topic" content, I don't know what else to do & I feel as though XDA is THE ABSOLUTE BEST forum site for any Android help, apps, devs research, roms, etc. Thx in Advance!!
Click to expand...
Click to collapse
I can tell you that it's not related to the files because I use them on my work PC all the time. I am working 10 hours days, 6 days a week. So the only time I can do anything out of the ordinary on my phone, it has to be at work.
That being said, have you tried system restore? I'm not sure if that requires admin rights, it might. On another note, tell the IT guy your internet explorer just stopped working, they love that. Because seriously, it's unrelated. The most he will do is uninstall and reinstall IE/Chrome. If that doesn't fix it, a system restore should. If that still does not, there is something off with the settings for internet access (I've seen that before). But if you are saying there is a shield/lock over an icon, that's new to me.
Also, I can install chrome at my work. It usually does not require admin rights, that and Firefox. There are also many portable browsers you can download from another PC and copy the zip file to the laptop, and run the app. Just search portable browser. At least this will help determine if the browsers installed got locked or if there is a network setting being blocked.
Let me know how it goes. This IS a bit off topic, but let's figure out what's wrong publicly so the mods can see there is nothing wrong with the zip I posted and then we can have our posts removed.
dopy25 said:
[/HIDE]
I can tell you that it's not related to the files because I use them on my work PC all the time. I am working 10 hours days, 6 days a week. So the only time I can do anything out of the ordinary on my phone, it has to be at work.
That being said, have you tried system restore? I'm not sure if that requires admin rights, it might. On another note, tell the IT guy your internet explorer just stopped working, they love that. Because seriously, it's unrelated. The most he will do is uninstall and reinstall IE/Chrome. If that doesn't fix it, a system restore should. If that still does not, there is something off with the settings for internet access (I've seen that before). But if you are saying there is a shield/lock over an icon, that's new to me.
Also, I can install chrome at my work. It usually does not require admin rights, that and Firefox. There are also many portable browsers you can download from another PC and copy the zip file to the laptop, and run the app. Just search portable browser. At least this will help determine if the browsers installed got locked or if there is a network setting being blocked.
Let me know how it goes. This IS a bit off topic, but let's figure out what's wrong publicly so the mods can see there is nothing wrong with the zip I posted and then we can have our posts removed.
Click to expand...
Click to collapse
Thanks for getting back to me, I appreciate it.
I'm glad to hear that it's not the file bc I cannot uninstall that regardless. We do have crazy blocks on all the computers at my work. I'm pretty sure it has to do with the sensitive information we have (a drug tx center so everyone's personal info is in our database). We can't even update the time on our computers, I have no clue why. I asked him once, he said something about giving that permission would open up another way to bypass security (I can't remember exactly).
This is my laptop, I never even bother bringing into work because I work so much from home. For example my login at the office has updated twice when at home it's still my old login password. The computer is physically in bad shape (it's been used & abused for sure) I'd prefer not to the bring it in for him to see so I plan on waiting to Friday night (IF ALL ELSE FAILS) and txtg him saying I absolutely need to work & see if he will do troubleshoot remote access! I hope that doesn't sound too horrible :-/
As I was typing this I just received an email to restart all workstations due to updates/ changes to the server done this weekend... Hmmmm it could totally be bc of this!!!!! Fingers crossed. I may just have to bring it in let it connect to the local server reset it, and bam good to go If not due to this I can almost guarantee it's the internet settings that I don't have access to!! But the portable browser should work...
I will still try all of your suggestions once I get home this afternoon and report back to you ASAP!!
Luckily I have my friends laptop to borrow & Dell had some good deals on laptops last night so I ordered a really nice one since I really need a personal computer again. Which I will also get an expense check for (bonus)!! But, won't arrive until 3/16. Until then I do have access to extra pc's here I could always swap it out, but I don't want to be scrutinized or punished for being sneaky, it's really not my character...
Again, I appreciate your input. Also, totally agreed on the "off-topic resolution" first and then delete our posts...
Thanks Again!
Yeah, I cannot get through the security on it.
When I look at the properties or try to repair Chrome or IE, it has an incorrect path, totally crazy looking.
\\localhost\C$\os(c\Users\mludford.....
I'm currently downloading a zip for a standalone browser. Hopefully that'll work...
This thread in general is totally crazy too, it looks like I replied like 3 or 4 times, I DID NOT :/ I tried twice & it told me that I didn't have access to the post, with a grey button over my original post you replied to, saying "Spoiler"!?! Very strange....
M-FayeHTC said:
When I look at the properties or try to repair Chrome or IE, it has an incorrect path, totally crazy looking.
\\localhost\C$\os(c\Users\mludford.....
I'm currently downloading a zip for a standalone browser. Hopefully that'll work...
This thread in general is totally crazy too, it looks like I replied like 3 or 4 times, I DID NOT :/ I tried twice & it told me that I didn't have access to the post, with a grey button over my original post you replied to, saying "Spoiler"!?! Very strange....
Click to expand...
Click to collapse
Needless to say it's not the settings or anything with the computer as I took it into work for it to "register" & update to the network settings... Nothing! So, I'm trying the above to see if I can't get around it. Thanks Again

Categories

Resources