Hi all. My son's stock Galaxy S3 turns on, but the screen stays black. It vibrates when receiving calls, and when on, the menu and back lights turn on when the power button is pressed. The blue light in the upper-left corner blinks every 10 seconds or so, so the phone is on.
Ideas? I've tried holding the home and power up buttons when turning on, the home and power down buttons when turning on, pulling the battery, SD, and SIM card for multiple minutes, etc.
natescape said:
Hi all. My son's stock Galaxy S3 turns on, but the screen stays black. It vibrates when receiving calls, and when on, the menu and back lights turn on when the power button is pressed. The blue light in the upper-left corner blinks every 10 seconds or so, so the phone is on.
Ideas? I've tried holding the home and power up buttons when turning on, the home and power down buttons when turning on, pulling the battery, SD, and SIM card for multiple minutes, etc.
Click to expand...
Click to collapse
Sounds hardware related.
I'd get it looked at, you might be able to tear it down yourself and see if the ribbon cable for the display is connected correctly. There are good tutorials online.
It could be a pretty expensive fix, so it may be worth it to upgrade to a new device or use insurance to replace it. It definitely sounds like the phone is on.
Sent from my SCH-I535 using Tapatalk 2
Thanks! The phone is from June, so Verizon agreed to send a new one. Yay!
BadUsername said:
Sounds hardware related.
I'd get it looked at, you might be able to tear it down yourself and see if the ribbon cable for the display is connected correctly. There are good tutorials online.
It could be a pretty expensive fix, so it may be worth it to upgrade to a new device or use insurance to replace it. It definitely sounds like the phone is on.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
Related
My Transformer was working fine, battery fell below 9% so I put it to sleep and plugged it in...
Now the device will not turn on, back of unit is getting warm?
Well, the warmth will be the battery charging. No issue there.
See one of the half dozen threads about not turning back on.
It came back to life, after holding the power button still seemed dead, then i plugged in a HDMI cable and it turned on.
My power button is finicky... every thing else seems perfect...
SonicTab said:
My Transformer was working fine, battery fell below 9% so I put it to sleep and plugged it in...
Now the device will not turn on, back of unit is getting warm?
Click to expand...
Click to collapse
Mine does this. You have to power off completely. To do that, you must hold the power button for more than 10 seconds to turn it off. Wait a bit, then power it back on by holding the power for 5 seconds.
I've searched around and people say it's the lock screen that causes the screen to blank. But I don't think that was it, I disabled it and it still does it.
Next someone says it has something to do with WiFi, I don't think this is right also because it has happened at times when I had the wifi OFF.
nxp3 said:
Mine does this. You have to power off completely. To do that, you must hold the power button for more than 10 seconds to turn it off. Wait a bit, then power it back on by holding the power for 5 seconds.
I've searched around and people say it's the lock screen that causes the screen to blank. But I don't think that was it, I disabled it and it still does it.
Next someone says it has something to do with WiFi, I don't think this is right also because it has happened at times when I had the wifi OFF.
Click to expand...
Click to collapse
Are you saying before charging you power it off completely or always?
SonicTab said:
Are you saying before charging you power it off completely or always?
Click to expand...
Click to collapse
No I'm saying to do that when your screen is blank and can't turn on
There isn't much in the way of details for what just happened to my phone but I'll try my best to be as detailed as possible.
I picked it up and turned the screen on then I hear a "pop" sound. (i don't know if it was a hardware pop or something that came from the speaker)
The screen grayed out a little bit, the system buttons on the bottom of the screen disappeared and horizontal lines appeared on the bottom quarter of the screen. The screen was also completely unresponsive.
I held down the power button to restart the phone, when I did it vibrated and the screen turned off. However, the phone won't turn back on now. Plugging the phone into the wall doesn't make the charging icon appear so I'm assuming that my phone just died.
The phone was bootloader unlocked, rooted, and had Franco kernal r14 on it. No overclocking, under-clocking, or under-volting.
Anyone have any suggestions as to what I could try to either bring it back to life or confirm that it is indeed dead?
Hold both volume buttons and the power button and see if it will go into the bootloader.
Sent from my Nexus 5 using Tapatalk
0dBu said:
Hold both volume buttons and the power button and see if it will go into the bootloader.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Power button doesn't work. Volume Up + Power button doesn't work. VolUp/ VolDown + Power button doesn't work.
CaucasianAsian said:
There isn't much in the way of details for what just happened to my phone but I'll try my best to be as detailed as possible.
I picked it up and turned the screen on then I hear a "pop" sound. (i don't know if it was a hardware pop or something that came from the speaker)
The screen grayed out a little bit, the system buttons on the bottom of the screen disappeared and horizontal lines appeared on the bottom quarter of the screen. The screen was also completely unresponsive.
I held down the power button to restart the phone, when I did it vibrated and the screen turned off. However, the phone won't turn back on now. Plugging the phone into the wall doesn't make the charging icon appear so I'm assuming that my phone just died.
The phone was bootloader unlocked, rooted, and had Franco kernal r14 on it. No overclocking, under-clocking, or under-volting.
Anyone have any suggestions as to what I could try to either bring it back to life or confirm that it is indeed dead?
Click to expand...
Click to collapse
Try leaving it plugged In for awhile even though it doesn't appear to be charging. You could try to hold town the power button for thirty seconds.
It seems like it COULD be bricked. If it is, I would contract Google for a RMA. Their not going to spend there time fixing it just to see if you were rooted or unlocked.
Good luck.
Sent from my Nexus 5 using Tapatalk
supitsronnie said:
Try leaving it plugged In for awhile even though it doesn't appear to be charging. You could try to hold town the power button for thirty seconds.
It seems like it COULD be bricked. If it is, I would contract Google for a RMA. Their not going to spend there time fixing it just to see if you were rooted or unlocked.
Good luck.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
I kinda figured since it's bricked they wouldn't be able to tell. I'll try leaving it on the charger overnight and see what happens. Thanks for your input.
It's doa. Rma it.
Hey,
A few months ago I unfortunately dropped my phone so the screen was up to no good.
I left it for some time until I found a new screen on the ebay for decent money.
I changed the screen (LCD + glass) by the guides on the youtube.
Unfortunately there is no screen activity or any other interaction after that.
I can get the blinking orange led when connected to a charger or PC and after a night of charging the led turned green.
When I try to turn it on theres no ordinary bottom row buttons flashing or anything else.
I tried booting it into bootloader via PC but still no luck. Computer can't connect to the phone.
The motherboard gets warm and the led blinks so it shouldn't be dead.
Does anybody have experience with that type of situation? Would hate to lose my phone.:crying:
So at the moment if I turn it on it just randomly vibrates after every 30 seconds lol.
Somehow if I fiddle around with the power button for long enough I can get the bottom row white leds to flash but thats all.
If I hold the power button hold long enough, the flashing stops and the charging lite turns from green to off or orange.
Can it be that the S4 screen doesn't fit on S3 or something like that? By visual comparing they look the same.
jaank said:
So at the moment if I turn it on it just randomly vibrates after every 30 seconds lol.
Somehow if I fiddle around with the power button for long enough I can get the bottom row white leds to flash but thats all.
If I hold the power button hold long enough, the flashing stops and the charging lite turns from green to off or orange.
Can it be that the S4 screen doesn't fit on S3 or something like that? By visual comparing they look the same.
Click to expand...
Click to collapse
It maybe because you have a s4 screen on a s3 phone or vice versa I believe that the s4 screen draws in more power so the s3 might not be able to give it enough don't quote me on this I just think this may be the answer
Sent from my SPH-L710 using Tapatalk
Flashalot said:
It maybe because you have a s4 screen on a s3 phone or vice versa I believe that the s4 screen draws in more power so the s3 might not be able to give it enough don't quote me on this I just think this may be the answer
Sent from my SPH-L710 using Tapatalk
Click to expand...
Click to collapse
Not so sure on this. On the visual inspection there are no difference and I can't really get the phone as far to even show anything.
Any ideas?
Hi Everyone,
I'm have a problem with my One XL. It's an Australian Telstra item. I got soaked in the rain and the phone got wet. I put it in rice for a few days to soak up the moisture, then charged it up. After this the screen backlight would intermittently fail, and i noticed if I squeezed the LHS of the phone it would sometimes make the screen go on or off. The problem got worse over the space of about an hour and eventually the screen would not come on. I opened up the case, and noticed there was a split in the ribbon cable that is part of the screen at the point that it is folded over 90deg (I'm not sure why this was never a problem before the phone got wet?)
So I stupidly got straight stuck into taking it apart to replace the screen before backing up all my stuff. I ordered a new screen of ebay and replaced the old one. Now I am having the following behaviour:
1-Press and hold power button - Phone vibrates once, then does nothing. Screen doesn't come on.
2-Plug into PC - LED flashes red for a while then goes solid red. Screen doesn't come on. Nothing pops up in "My computer"
3-Press and hold (~10sec) power after 2 - Red light goes off. Phone vibrates once every ~30 seconds. Screen doesn't come on.
4-Press and hold power after 3 - Home/Back/Apps LEDs flash 20 times, no other change.
I also tried a number of combos of power + vol -/+ with no success.
Also, I was being lazy and doing this without putting the case back on, and my power button has fallen apart. It looks like that ribbon cable is only ~$5 on ebay, so no big deal, but means I cant really do anymore troubleshooting at the moment.
So I guess the big question is, can the phone still be salvaged? I'm thinking maybe it's stuck in a boot loop with the screen also not working?
Any help is greatly appreciated.
Cheers,
Chris
The first question I have would be did you make sure you got the right screen? There are three different types of screens that came on this phone and you need to make sure you match it correctly. You can identify the type of screen by the colour of the flex cable attached.
Secondly, you should never use the power + volume up button combination, I'm not sure where you saw that information but it puts the phone into Qualcomm download mode which you definitely don't want. The only button combination that should ever be used is power + volume down.
Sent from my Evita
Hi Timmaaa,
Both screens had the same orange/brown flex cables. I did read that there were different screens, but had thought there were only two and that the other had a green flex, so I definitely didn't get that one. Are the other 2 colours close?
I'm not sure where I read the power + volume up thing as I have read a heap of different threads. What would the expected behaviour be if I had put it into that mode?
Thanks for your help.
Cheers,
Chris
The three different screens have very different colour coding on the flex cable, so matching should be a piece of cake, which I believe you've done correctly. Putting the phone into Qualcomm download mode is kinda like a bricked state, if you're getting the red charging led and the cap button lights flashing I think you're ok.
Another thing to note is that you usually need to sync your new screen when you install it. From memory I believe you need to power the phone on, remove the old screen while the phone is on, and install the new screen while the phone is on. If you didn't follow this process that might be why your display isn't working. Other than that your phone might have just suffered some fatal hardware damage due to the liquid ingress, which isn't going to be fixable.
Sent from my Evita
Thanks again Timmaaa,
I had a closer look at my old screen and it does have the small green section on the flex cable which I didn't notice the first time around. Bugger.
So i disassembled it again and swapped back to the old screen. The display still doesn't turn on, but the phone itself now stays on and the computer recognises it! I'm transferring all my photos across to my computer now, then I'll try to sync it properly and see if that helps.
Cheers,
Chris
Ok so I swapped the screens back and forth with the power on, and now it's working! Thanks Timmaaa, I would never have guessed I needed to have the phone turned on in order to swap parts, seems pretty weird. Now just got to get a new power button.
Cheers,
Chris
Awesome. Glad to be able to help.
Sent from my Evita
Got a perculiar problem with the S6. The screen suddenly went black with just the blue LED blinking in the upper left hand corner of the sreen. I am assuming the phone went off completely as I cannot access it via the PC also. I have tried all possible button combinations for reset but no luck so far.
Anyone else experience this? Did you find a fix?
Sent from my SM-G920V using XDA Free mobile app
Well the phone is not off if the blue led light is blinking, I've never had it happen to me where the phone didn't come back though. I was using an app one day (YouTube I think) and the app crashed and bugged the phone out to where the screen went black but the led was blinking. I left the phone alone after several attempts of hitting home and power to get the screen to come back on and finally I think I plugged it into the charger and it kind of just fixed it self and has not happened again. This is the scary parts of not having a removable battery.
Sent From My Rooted Galaxy S6
I've got the 128GB and yes I have experienced this as well, twice! I hold down both volume buttons the home button and the power button at the same time, this will put you in maintenance mode. It'll take a couple of seconds holding those buttons but just keep them pressed. Be careful because when it does come on it comes on fast and factory reset is the second selection in that mode. The first time I did it I wiped my phone, the second time it happened I lifted my fingers fast enough not to make a selection. Give that a try and see what happens.
frostysax said:
I've got the 128GB and yes I have experienced this as well, twice! I hold down both volume buttons the home button and the power button at the same time, this will put you in maintenance mode. It'll take a couple of seconds holding those buttons but just keep them pressed. Be careful because when it does come on it comes on fast and factory reset is the second selection in that mode. The first time I did it I wiped my phone, the second time it happened I lifted my fingers fast enough not to make a selection. Give that a try and see what happens.
Click to expand...
Click to collapse
Thanks very much.
Hey guys, i really need someones help. Everything in my life runs on my phone. The phone is Samsung Galaxy Note 5. Its screen is black and there is a blue blinking light. I have tried to hold the volume down and power buttons but it didnt do anything. It doesn't respond even after plugging in.
chaudharysafi said:
Hey guys, i really need someones help. Everything in my life runs on my phone. The phone is Samsung Galaxy Note 5. Its screen is black and there is a blue blinking light. I have tried to hold the volume down and power buttons but it didnt do anything. It doesn't respond even after plugging in.
Click to expand...
Click to collapse
Sounds like you have the same problem as stated in OP. You could try doing what was recommended earlier in the thread. By the way, this is an inappropriate location to put your problem. Read the forum rules
Never rooted.
I am having the same issue. I have tried everything. Factory reset. Reboot/wiped cache and even trying to install verizon's Fireware again as it come only up to the Samsung S6 logo then goes blank. This is now my 4th replacement with Verizon and getting sick of it. How do I fix this? Odin stops at Get Pit mapping then when I do that says it can not install NAND. Using Odin 3.10.6 and 3.10.7. Tried mutli cables and restarted computer as well. This is driving me insane these phones keep doing this.
same problem except nothing comes on. no led, no reset, no computer recognition...
Same issue. Boots into and displays recovery fine and download mode. I can also bring up the safe mode menu ... just can't boot into the OS. Blue light on. I get a response in ADB when powered on, just can't enter any commands due to not being able to authorize access via phone screen.
Update:
Well as strange as it sounds, as soon as I plopped it down on the wireless charger for my S7 the screen came to life. It was at 95% battery prior to. Whatever gremlins got into the gizmos within the wireless charging apparatus seems to have caused this strange occurrence.