Related
I think i bricked my sensation cus i turned it off and it dont turn back on it wasnt dead when i was flashing a rom??
It dont want to do anything not even go into recovery at all what do i do?
LOL WHOA...
stop freaking out lol do your self a favor
what had you done before you turned it off? (flash a rom? flash a mod? flash anything? drop it in water lol?)
give some info lets see if we can help. you probably just need to boot into recovery and reboot
bord1er said:
I think i bricked my sensation cus i turned it off and it dont turn back on it wasnt dead when i was flashing a rom??
It dont want to do anything not even go into recovery at all what do i do?
Click to expand...
Click to collapse
Battery Dead ? Plug It In
Did you Pull That Battery ? Wait A Few Minutes And Then Try to turn it on ?
rddocke said:
LOL WHOA...
stop freaking out lol do your self a favor
what had you done before you turned it off? (flash a rom? flash a mod? flash anything? drop it in water lol?)
give some info lets see if we can help. you probably just need to boot into recovery and reboot
Click to expand...
Click to collapse
check it out i flashed a rom right and it didnt want to boot into recovery so i took the battery out and it never turned on again????
Plug it in let it charge a bit. If the orange light blinks four times and turns off, then you need to do a battery swap.
If it charges then let it charge boot unto recovery and restore your backup. I hope you made a backup.
Which Rom were you flashing?
rddocke said:
Plug it in let it charge a bit. If the orange light blinks four times and turns off, then you need to do a battery swap.
If it charges then let it charge boot unto recovery and restore your backup. I hope you made a backup.
Which Rom were you flashing?
Click to expand...
Click to collapse
nothing comes on
Mate, you're really not helping yourself here. Can you please give a step-by-step of what you were trying to do and a bit more information as to what happened when it didn't go to plan?
e.g. I was trying to flash a new ROM. The ROM update completed successfully but upon rebooting it wouldn't turn on.
The above example gives a bit more insight as to the situation
EddyOS said:
Mate, you're really not helping yourself here. Can you please give a step-by-step of what you were trying to do and a bit more information as to what happened when it didn't go to plan?
e.g. I was trying to flash a new ROM. The ROM update completed successfully but upon rebooting it wouldn't turn on.
The above example gives a bit more insight as to the situation
Click to expand...
Click to collapse
this is what i happend i flash a 3.5 sense rom on my sensation it didnt get any signal so i tryed to go into recovery threw rom manager and it didnt want to so i took the battery out and put it back in and it never turned on from their nothing turns on not the charging light or anything
and no it wasnt dead when i tryed so its not the battery
bord1er said:
this is what i happend i flash a 3.5 sense rom on my sensation it didnt get any signal so i tryed to go into recovery threw rom manager and it didnt want to so i took the battery out and put it back in and it never turned on from their nothing turns on not the charging light or anything
and no it wasnt dead when i tryed so its not the battery
Click to expand...
Click to collapse
Pop the battery out for about 10 minutes then put it back in and try charging the battery. Also try charging from a different power source like an AC adapter or via your computers USB port. If the battery light doesn't come on then your battery is most likely dead and you may need to find a replacement.
bord1er said:
this is what i happend i flash a 3.5 sense rom on my sensation it didnt get any signal so i tryed to go into recovery threw rom manager and it didnt want to so i took the battery out and put it back in and it never turned on from their nothing turns on not the charging light or anything
and no it wasnt dead when i tryed so its not the battery
Click to expand...
Click to collapse
you said you didnt get any signal. dude you prolly didnt flashed the correct radios. some roms tells you witch radio you need before flashing the rom. not all the roms have the correct radios due of a lot of sensation worldwide. had you tried to go into fastboot at all by holding power and vol down at the same time.
Aegishua said:
Pop the battery out for about 10 minutes then put it back in and try charging the battery. Also try charging from a different power source like an AC adapter or via your computers USB port. If the battery light doesn't come on then your battery is most likely dead and you may need to find a replacement.
Click to expand...
Click to collapse
Yes battery swap as I mentioned.
On a side note
Can anyone tell me why that is the only solution to the problem when the phone dies down like this
Thisy wife let's her phone die alllll the time and I constantly have to swap mine and her battery.
Hi all
My Sensation has s-off, h-boot 1.29
Flashed JB 4.3 asop rom last night, booted, and all was well.
I turned off wifi and left phone without charging over night.
The battery had drained a lot overnight (down to about 30%) so i checked battery stats and saw wifi was on 100% of the time...even though I had switched it off...and the phone was very warm.
I rebooted and now it wont start. No Leds lighting. Swapped my battery and still wont boot.
Connected to PC and i see QHSUSB_DLOAD
Left charging with and without battery for a few hours but still the same.
Most guides appear to show this happens when trying to s-on or flashing but my phone was working until i restarted.
any ideas?
dub2012 said:
Hi all
My Sensation has s-off, h-boot 1.29
Flashed JB 4.3 asop rom last night, booted, and all was well.
I turned off wifi and left phone without charging over night.
The battery had drained a lot overnight (down to about 30%) so i checked battery stats and saw wifi was on 100% of the time...even though I had switched it off...and the phone was very warm.
I rebooted and now it wont start. No Leds lighting. Swapped my battery and still wont boot.
Connected to PC and i see QHSUSB_DLOAD
Left charging with and without battery for a few hours but still the same.
Most guides appear to show this happens when trying to s-on or flashing but my phone was working until i restarted.
any ideas?
Click to expand...
Click to collapse
if your pc detects it as QHSUSB_DLOAD then try the unbricking project and see if it works
by the way can you access to the bootloader?
rzr86 said:
if your pc detects it as QHSUSB_DLOAD then try the unbricking project and see if it works
by the way can you access to the bootloader?
Click to expand...
Click to collapse
Wont boot and cant get into recovery. Connected to work pc and seeing device as QHSUSB_DLOAD
Cant try much while at work but im looking for a few ideas for when i get home.
dub2012 said:
Wont boot and cant get into recovery. Connected to work pc and seeing device as QHSUSB_DLOAD
Cant try much while at work but im looking for a few ideas for when i get home.
Click to expand...
Click to collapse
ur phone is definitely bricked for sure ,but thx the god that ur brick type has a fix try unbrick project it will work :good:
Harbir said:
ur phone is definitely bricked for sure ,but thx the god that ur brick type has a fix try unbrick project it will work :good:
Click to expand...
Click to collapse
Thanks guys
At least i have some hope.
Ill try unbrick project later
Not detecting phone using ./brickdetect.sh
is Jtag the only solution now?
dub2012 said:
Not detecting phone using ./brickdetect.sh
is Jtag the only solution now?
Click to expand...
Click to collapse
actually did you try to switch it on with a different battery?
rzr86 said:
actually did you try to switch it on with a different battery?
Click to expand...
Click to collapse
I have 2 Ankers and it wont boot with either.
Does the unbrick project support hboot 1.29?
dub2012 said:
I have 2 Ankers and it wont boot with either.
Does the unbrick project support hboot 1.29?
Click to expand...
Click to collapse
AFAIK yes
Hi,
I own a Motorola Moto E XT1022 (1st gen), which I bought from Flipkart India.
It came with KitKat 4.4.4, and I had put a soak test version of android L 5.0.2 , officially released by Motorola in May or something.
It worked fine until December 2015- then it started having issues. It would lock its screen automatically. When pressed the power button, it will show the screen that was on before locking. When touched, it will make me type the password. After typing it, it would work fine. Same thing would happen after 30 min. But that was not a big issue.
3-4 days after facing this issue, it restarted automatically. And it stuck on the Motorola M logo.
I shut it down, tried starting it again. No luck. One time, it started. I immediately performed a factory reset by going in settings. At that time, the soft keys (back, home and recent apps) didnt appear on the screen. That was strange. After factory reset, it restarted itself. Started working normally, all clean phone. (Still on 5.0.2 soak test obviously) But it didnt show the soft keys as I said before.
Then it restarted, again. And since then it is stuck in boot loops. I stormed the internet, and found how to factory reset using recovery, wipe data, even flash stock OS 4.4.4 from official Motorola website. I have done all that. I have-
1) Factory reseted using hard reset method
2) Wiped Cache partition
3) Flashed stock firmware from official website (KitKat 4.4.4)
It is still stuck in boot loops. It shows the M logo at startup, and stays like that forever. Only shuts down when all battery is drained. Now it is not charging either. It is stuck at 0%. But I think charging issue will be fixed by charging it for some hours.
Now, the phone is running stock OS, is completely cleaned, and is stuck in boot loops.
I cannot afford to buy another phone. When I asked Motorola for help using the Chat function of the Help app, they suggested me showing it to the closest service centre. I showed it to them but they were giving excuses that they will see if they can do...and didnt do anything. (PS I'm from India, and it is like this for most of the service centres here.)
So please, can anyone, please please please help me?
All the help is appreciated. Thank you!
PS. I have tried hard reset and wiping cache partition over 8 times now. It's still not working. Please suggest some other method if possible.
I guess it is because of the faulty soak test ROM.. Would you be interested in rooting? I guess flashing a different stable ROM would help.. Even a factory image..
WickedCool19 said:
I guess it is because of the faulty soak test ROM.. Would you be interested in rooting? I guess flashing a different stable ROM would help.. Even a factory image..
Click to expand...
Click to collapse
Sir,
I am ready to do anything to make it work. If rooting is the solution, or maybe flashing a different OS, or both, I am ready to do anything.
Please tell me what should I do next.
Thank you for your valuable reply!
Alright .. First of all, can you access your phone right now? I mean, does it actually boot up?
Hit thanks if I helped!
WickedCool19 said:
Alright .. First of all, can you access your phone right now? I mean, does it actually boot up?
Click to expand...
Click to collapse
Here is the current state of my phone-
It is completely out of charge.
When I charge it, after about ten minutes or so, it shows a symbol of pulling the wire out of the socket.
First time when I saw this, I switched off charging and pulled it off. Then the phone shut down as it had no charge.
Second time when I saw this symbol, I kept it charging. After 30 minutes, it showed the battery charging symbol, with 0%.
And I forgot to mention one thing. When I plugged in the charger and started charging the phone, the LED notification light glowed and it stayed on. No idea why. After some time, it stopped glowing. Battery showed 0% even after charging for about an hour. ( Note- LED notification light glowed up and went out randomly.)
( Then I got depressed and stopped charging the phone. Then it switched off as it didnt have any charge.)
Now, I think charging it for a long time will make it start again.
But I think I will get into boot loops after I start the phone. And it will stay like that until the battery is drained out completely.
Thank you!
PS. Should I start charging it right now? Its 12 midnight here, maybe I should keep it overnight. (Is it safe? The battery won't explode or anything right? Sorry I'm a little paranoid, since my uncle's micromax phone burst while charging.)
Same time zone
Now look this happens in my moto e too.. There was an issue with my power button, it restarted when ever i unlocked or locked my device.. I rooted, flashed a kernel which supports gesture wake and now i use the button rarely..
Now coming to ur problem, don't charge it overnight, might harm the battery at the most.. Charge it for an hour.. And try to boot the device up.. Only then, can i help you out..
WickedCool19 said:
Alright .. First of all, can you access your phone right now? I mean, does it actually boot up?
Hit thanks if I helped!
Click to expand...
Click to collapse
Its midnight. I have to sleep. But I will reply to your posts as soon as I wake up.
(Just telling this in case if you wonder why am I not replying. I actually have to log off now. I will reply tomorrow. Please do not close this thread. Thanks and sorry too. Good night from India! I appreciate your help!)
WickedCool19 said:
Same time zone
Now look this happens in my moto e too.. There was an issue with my power button, it restarted when ever i unlocked or locked my device.. I rooted, flashed a kernel which supports gesture wake and now i use the button rarely..
Now coming to ur problem, don't charge it overnight, might harm the battery at the most.. Charge it for an hour.. And try to boot the device up.. Only then, can i help you out..
Click to expand...
Click to collapse
Ok, I will charge it when I wake up tomorrow. It might not get enough charge in 1 hour, so I may have to charge it for 2-4 hours to start it. Thank you for your kind help! We will talk tomorrow. Good night!
PhantomCode31 said:
Ok, I will charge it when I wake up tomorrow. It might not get enough charge in 1 hour, so I may have to charge it for 2-4 hours to start it. Thank you for your kind help! We will talk tomorrow. Good night!
Click to expand...
Click to collapse
Charge it.. One hour just might do it..
What ever you do.. Just try to boot it up or else i might not be able to help you..
Cheers..
How can root
WickedCool19 said:
Charge it.. One hour just might do it..
What ever you do.. Just try to boot it up or else i might not be able to help you..
Cheers..
Click to expand...
Click to collapse
Hi.
I have started charging the phone just now. Let's see how much it charges after an hour.
Right now its LED Notification light is blinking randomly, and battery charging 0% symbol is showing up on start screen.
The screen wakes up and sleeps randomly. Lets see what happens.
WickedCool19 said:
Charge it.. One hour just might do it..
What ever you do.. Just try to boot it up or else i might not be able to help you..
Cheers..
Click to expand...
Click to collapse
Hi,
I have charged the phone for about an hour. Its still charging.
It now shows the recovery menu, giving me options such as
Normal Powerup
Recovery
Factory etc.
And under all the options, this is what I see-
hab check failed to boot
failed to validate boot image
Fastboot Reason: Fall-through from not-charger boot
ode
What do I do now? I tried Normal Powerup, it showed M logo and showed the above screen again.
PLEASE REPLY URGENTLY. Thanks
<<UPDATE>>
Phone is charging. About 28% battery right now and still charging normally.
Now should I try starting it? Please reply.
Yes.. Try starting it. Or else nothing can be done..
WickedCool19 said:
Yes.. Try starting it. Or else nothing can be done..
Click to expand...
Click to collapse
When I start it, its no longer in a boot loop.
It shows Motorola M logo for a second and automatically opens recovery mode.
there I get this message at the bottom (in pink or some color like that)
hab check failed for boot
failed to validate boot image
(in yellow/green color) Fastboot Reason: Fall-through from normal boot mode
A question.. Had u enabled usb debugging from dev settings by any chance?
WickedCool19 said:
A question.. Had u enabled usb debugging from dev settings by any chance?
Click to expand...
Click to collapse
When this issue started, I had soak test android L 5.0.2, and yes I had enabled USB Debugging from it.
But, after the issue, I flashed stock rom 4.4.4 on it. But I havent been able to access the phone normally since that. So I had it enabled in 5.0.2, but now it has 4.4.4, which I never operated.
Hope I didnt confuse.
PhantomCode31 said:
When this issue started, I had soak test android L 5.0.2, and yes I had enabled USB Debugging from it.
But, after the issue, I flashed stock rom 4.4.4 on it. But I havent been able to access the phone normally since that. So I had it enabled in 5.0.2, but now it has 4.4.4, which I never operated.
Hope I didnt confuse.
Click to expand...
Click to collapse
How did u flash? Using recovery?
WickedCool19 said:
How did u flash? Using recovery?
Click to expand...
Click to collapse
I shut down the phone.
Connected to laptop.
Hold down the power and volume key.
Factory Reseted using recovery menu.
I had official kitkat 4.4.4 ROM in laptop.
I flashed it using command prompt.
Now im sure it has kitkat, the word "Android" at boot animation has changed, like it did on kitkat.
So I'm sure it has KitKat.
<<UPDATE>>
Phone is not stuck in boot loops anymore.
It switches off, I can stop the draining of the battery.
When I turn it on, it shows motorola M logo for 1 second.
Then it takes me automatically to recovery mode. And gives the hab error as I mentioned above.
So you do know how to flash using ADB...
---------- Post added at 03:52 PM ---------- Previous post was at 03:45 PM ----------
Then just get on with it..
Here's a link of cm 12.1.. Download a zip and flash using ADB (as you did from Command prompt for kitkat)
---------- Post added at 03:55 PM ---------- Previous post was at 03:52 PM ----------
http://download.cyanogenmod.org/?device=condor
Hello everyone, it's my first post here, and i need help.
My Moto G 1st gen was bricked after i've tried to pass a ROM, so him stayed in bootloop. But the battery ended up, and now my phone doesn't video. To connect it to my computer, he acknowledges, but can not transfer any other ROM to him, because did not the video and says that the battery is low. Does anyone have any solution how to solve this?
Thank you in advance, and I apologize for my bad English
have you tried keeping the phone on charger for while, just keep it on charge, even if you dont see anything on the screen, and then try booting into recovery of fastboot
Try to charge your phone on bootloader
Sent from my Moto G using XDA-Developers mobile app
koshikas said:
have you tried keeping the phone on charger for while, just keep it on charge, even if you dont see anything on the screen, and then try booting into recovery of fastboot
Click to expand...
Click to collapse
FernandoJjr said:
Try to charge your phone on bootloader
Click to expand...
Click to collapse
doesn't work :/
disassembly phone and remove battery, try it charge with universal charger http://www.ebay.com/itm/Mobile-Universal-Battery-Charger-LCD-Indicator-Screen-For-Cell-Phones-1-USB-Port-/271305860542 battery change video https://www.youtube.com/watch?v=bv5C0axnGIw
Good morning.
I have this honor 6x BLN-L21.
I did unlock with Multi-tool.
the procedure was successful but then the phone was stuck in
"your device is botting now..."
I tried the dload method.
then try to download the whole battery and try to go fastboot.
but nothing done ...
the pc does not recognize anything.
I also tried the low audio button method and plug the usb cable into the pc ... nothing.
I do not know what to do.
Help !!!
Hi !
Did you try to install recovery with mutli tool ? If yes, wich TWRP version did you try to install ?
For me the only one correct recovery version was the twrp-3.1.0-2-berlin.img !
My phone stay stuck with every others versions !
This page saved me --> https://www.******.com/root-huawei-gr5-2017-emui-5-0-install-twrp/
but I had to go back to stock rom first with the dload method by pasting the dlload update.app files on my SD card directly from the pc and putting my card back into the phone.
Flash elite twrp
siddhrsh said:
Flash elite twrp
Click to expand...
Click to collapse
how ?
Telephone not charge.
any combination not work ...
i have no idea how revive this telephone ...
please help !
Dexther said:
how ?
Telephone not charge.
any combination not work ...
i have no idea how revive this telephone ...
please help !
Click to expand...
Click to collapse
Hold volume down and plug usb cable to boot in bootloader
Or
Download full firmware using firmware finder and place update.app in dload folder on sd card boot phone holding volume up,down & power button simultaneously
i put device in test mode end recovery work.
But ... system not write.
why ?
I finaly found a solution.
But use a not conventional metod.
for the other people TEST POINT !
The only way !
Dexther said:
I finaly found a solution.
But use a not conventional metod.
for the other people TEST POINT !
The only way !
Click to expand...
Click to collapse
what is that solution??and test point??...got the same problem...phone stuck at your device is booting and nothing works...no recovery...no fastboot....phone discharged....
I've got anorher solution:
Wait until battery is down, then charge it only enough it boot( then you get the battery empty faste if you have to do it twice) now do a normal boot. Dont try any combinations or keys! Now you should boot into emui. If it worked download the official rollback package, put it on your sdcard into /dload folder. Fully charge your phone (or at least 30% otherwise it wont install because it says battery level is to low... )shutdown your phone. Now hold power button, volume up and volume down your phone will boot to the your phone got unlocked screen then it will reboot, keep the buttons pressed for a second then release, now it should flash the rollback package and reboot, after that you can flash emui 4. After that you can perform the emui 5 update. Now it should be safe to reboot to fastboot and relock the bootloader again if the system hasent done it automaticaly.
Now you should be able to reunlock bootloader!
My problem is that battery doesn't charge as it always boot on your device is booting... I left it charge all night but same problem... Your device is booting screen and no charging so I can't do anything
yannick66150 said:
My problem is that battery doesn't charge as it always boot on your device is booting... I left it charge all night but same problem... Your device is booting screen and no charging so I can't do anything
Click to expand...
Click to collapse
pm me
Dexther said:
pm me
Click to expand...
Click to collapse
Done...
How do you Know its not charging? Does it shows the charching screen? Cause i had this problem too, and at least in my case this problem caused enough battery consumption to empty the Battery in a night. So mabye something is wrong with the sensor? Or does it even shows the charching screen, because sometimes it has to boot some things (wich means it gets stuck at your device is booting) before it can show you the charching screen...
XelaaleX1234 said:
How do you Know its not charging? Does it shows the charching screen? Cause i had this problem too, and at least in my case this problem caused enough battery consumption to empty the Battery in a night. So mabye something is wrong with the sensor? Or does it even shows the charching screen, because sometimes it has to boot some things (wich means it gets stuck at your device is booting) before it can show you the charching screen...
Click to expand...
Click to collapse
It shows charging screen when i plug but led is flashing all time... And it boots a few moment later directly on your device is booting screen as if u enter stock or twrp recovery but stays stuck at this screen and led still flashing so no charging
But does the phone turns black and acts like battery is completly down? Means black screen dosent react to anything No Led? Because mavye you tust got an error with the led or something like this, because this freeze is consuming really much energy if you already have this problem since two days whitout charging and it freezes on this screen battery would be completely empty! If it shows device is booting ALL the time it has to charge. If it turns black after showing the screen then its mabye really not charging...
XelaaleX1234 said:
But does the phone turns black and acts like battery is completly down? Means black screen dosent react to anything No Led? Because mavye you tust got an error with the led or something like this, because this freeze is consuming really much energy if you already have this problem since two days whitout charging and it freezes on this screen battery would be completely empty! If it shows device is booting ALL the time it has to charge. If it turns black after showing the screen then its mabye really not charging...
Click to expand...
Click to collapse
Left it charging all night and still the same... Same screen showing your device is booting... And led still flashing... When i unplug phone shutdown a few seconds later
So... all telephone are a dark way to revive...
Testpoint end pay credit.
But pay attention i'm broke probabily a modem or not firmware modem are the same.
Dexther said:
So... all telephone are a dark way to revive...
Testpoint end pay credit.
But pay attention i'm broke probabily a modem or not firmware modem are the same.
Click to expand...
Click to collapse
What is testpoint ?
yannick66150 said:
Left it charging all night and still the same... Same screen showing your device is booting... And led still flashing... When i unplug phone shutdown a few seconds later
Click to expand...
Click to collapse
So then i don't know what to do. At leas t you could control if youre charging cable is working, but i dont think its gona work... I've heard they mabye replac or reflash it in service center but i luckily hadnt the chance to test it by now...
Ni
XelaaleX1234 said:
So then i don't know what to do. At leas t you could control if youre charging cable is working, but i dont think its gona work... I've heard they mabye replac or reflash it in service center but i luckily hadnt the chance to test it by now...
Click to expand...
Click to collapse
Thx for answering but nothing to do anymore... Charging cable is good as i use it with old phone i got to replace my honor 6x for the moment but i'm sure i made a mistake... Wanted to rollback to stock firmware as i was on elite rom 7.6... I always knew what i do with flashing roms etc and rollback but this time i made a mistake so....my entirely fault !!!