Database Info

[Q] helppppp

i tried to factory reset my data through cwm recovery and my mobile stuck there... i removed the battery and restarted my cell but it hanged on samsung logo.... i tried to flash firmware through KIES but now i get a screen saying """"" Flash firmware encountered an issue.. select recovery mode in kies and try again""...... what to do.....
samsung galaxy note GT-N7000, ICS 4.0.4..... plzzzz help.. i m stuck...... also found some error like "E:// cant load emmc" while wiping in cwm recovery.. plz helpppppp
:crying::crying::crying::crying::crying::crying::crying::crying::crying:

naveed8695 said:
i tried to factory reset my data through cwm recovery and my mobile stuck there... i removed the battery and restarted my cell but it hanged on samsung logo.... i tried to flash firmware through KIES but now i get a screen saying """"" Flash firmware encountered an issue.. select recovery mode in kies and try again""...... what to do.....
samsung galaxy note GT-N7000, ICS 4.0.4..... plzzzz help.. i m stuck...... also found some error like "E:// cant load emmc" while wiping in cwm recovery.. plz helpppppp
:crying::crying::crying::crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
you have to remember that after wiping the phone, you MUST flash a rom in your phone. The reason why your phone is stuck in the boot logo is because, there is NO software for it to run. Try flashing a rom
click thanks if helped

cs098 said:
you have to remember that after wiping the phone, you MUST flash a rom in your phone. The reason why your phone is stuck in the boot logo is because, there is NO software for it to run. Try flashing a rom
click thanks if helped
Click to expand...
Click to collapse
Wrong.
When you wipe user data/factory reset in the recovery it formats "/data/", the ROM itself is located in "/system/".
@naveed8695
You have to download a stock rom for your phone that you can flash using ODIN. You can follow this to flash your phone. At the bottom of the post you can find a small, simple tutorial on how to use ODIN. (1.b Final Installation)
REMEMBER TO KEEP "RE-PARTITION" UNTICKED
Can't figure it out? Visit the VillainRom IRC channel here.

cs098 said:
you have to remember that after wiping the phone, you MUST flash a rom in your phone. The reason why your phone is stuck in the boot logo is because, there is NO software for it to run. Try flashing a rom
click thanks if helped
Click to expand...
Click to collapse
it just stuck at factory reset.... nw i m stuck at flash firmware encountered and issue..... cant go to recovery mode .... and download mode always shows low battery cant download

TeeJay3800 said:
Just a reminder to everyone creating a new thread in the Q&A section. Please always include a relevant and descriptive title!
Click to expand...
Click to collapse

hi
Explain wat exactly happende so that i can help

[Q] CWM got mad :(

hello everyone,
I was using ICS stock ... after reason a thread I successfully rooted, installed CWM 6.0.2.8 with mobile uncle and then I flashed it with jellybean v3 ROM .. for a few days got no problem... but yesterday when I tried to go on CWM recovery mode hen my phone got factory reset automatically...... I thought may be my fingers slipped ... then I tried again and again and every time whenever I pressed VOL up button to go in recovery mode..... it directly factory reset my phone.... I flashed to install stock recovery of Micromaxa110 and after that when I tried to go in recovery mode .. it also factory reseted and then showed me a android logo with some red warning on it... I pull my battery out and start again now .... and flashed cwm again.... but now didn't tried to go in recovery mode due to fear... if anyone knows the solution then plz help me out... my cwm recovery mode is resetting my phone thanks

amitsaini said:
hello everyone,
I was using ICS stock ... after reason a thread I successfully rooted, installed CWM 6.0.2.8 with mobile uncle and then I flashed it with jellybean v3 ROM .. for a few days got no problem... but yesterday when I tried to go on CWM recovery mode hen my phone got factory reset automatically...... I thought may be my fingers slipped ... then I tried again and again and every time whenever I pressed VOL up button to go in recovery mode..... it directly factory reset my phone.... I flashed to install stock recovery of Micromaxa110 and after that when I tried to go in recovery mode .. it also factory reseted and then showed me a android logo with some red warning on it... I pull my battery out and start again now .... and flashed cwm again.... but now didn't tried to go in recovery mode due to fear... if anyone knows the solution then plz help me out... my cwm recovery mode is resetting my phone thanks
Click to expand...
Click to collapse
bro flash stock rom via SP flash tools it will work'
i got this already twice and solved via SP flash tool

amitsaini said:
hello everyone,
I was using ICS stock ... after reason a thread I successfully rooted, installed CWM 6.0.2.8 with mobile uncle and then I flashed it with jellybean v3 ROM .. for a few days got no problem... but yesterday when I tried to go on CWM recovery mode hen my phone got factory reset automatically...... I thought may be my fingers slipped ... then I tried again and again and every time whenever I pressed VOL up button to go in recovery mode..... it directly factory reset my phone.... I flashed to install stock recovery of Micromaxa110 and after that when I tried to go in recovery mode .. it also factory reseted and then showed me a android logo with some red warning on it... I pull my battery out and start again now .... and flashed cwm again.... but now didn't tried to go in recovery mode due to fear... if anyone knows the solution then plz help me out... my cwm recovery mode is resetting my phone thanks
Click to expand...
Click to collapse
bro. no need to flash full Rom.. ..rename clockworkmod recovery.. file to recovery.img and flash it through sp tools ...problem will solve

If nothing seems to work then try twrp recovery..flash it through sp flash tools or mobile uncle tools as per ur wish..

Hey techs,
Thanks, actully problem was solved after 5 mins when i posted this thread,, but i was not able to find this thread to post the answer.
solution was right there when i reinstalled the stock recovery and again installed the cwm hehehehe,, it worked,, thank you all have a nice day

Ntg happen. Open ur flas tools and load the scatter load file 4.1.1 and then click start after the green ring appers. Its ok. Now the process of rooting. Now u can easily root ur mobile.
Sent from my Micromax A110 using xda app-developers app

[Q] My A110 bricked ...plzz Help

Hi ,
I am new to the forum and recently started using custom roms..
I was installing the "rayne rom" using cwm and after formatting data and system..it stopped suddenly and gave a message "symlink failed"
Now the phone does not reboot to CWM recovery and only the previous Devs boot logo comes...PLEASE help...I think i may have bricked it.

@abhi007 said:
Hi ,
I am new to the forum and recently started using custom roms..
I was installing the "rayne rom" using cwm and after formatting data and system..it stopped suddenly and gave a message "symlink failed"
Now the phone does not reboot to CWM recovery and only the previous Devs boot logo comes...PLEASE help...I think i may have bricked it.
Click to expand...
Click to collapse
Are you pressing the recovery buttons correctly? Take out battery then put it back. Then try pressing the Power button and Volume Up + Down together and see if it opens CWM..

ibshar said:
Are you pressing the recovery buttons correctly? Take out battery then put it back. Then try pressing the Power button and Volume Up + Down together and see if it opens CWM..
Click to expand...
Click to collapse
Thanks for the reply..
Yes the CWM recovery came...but i do not have stock Rom in phone and my mem card slot is busted..
Should i try flashing using SP flash tools ???

@abhi007 said:
Thanks for the reply..
Yes the CWM recovery came...but i do not have stock Rom in phone and my mem card slot is busted..
Should i try flashing using SP flash tools ???
Click to expand...
Click to collapse
Then you need to flash the stock ROM with SP Flash tool

@abhi007 said:
Thanks for the reply..
Yes the CWM recovery came...but i do not have stock Rom in phone and my mem card slot is busted..
Should i try flashing using SP flash tools ???
Click to expand...
Click to collapse
Yes..u can flash through SP tool as said by @IBashar..in case..if u dont want to flash through SP tools..I will suggest u to use someone else SD card & paste ur rom in that & then flash through recovery..as I personally feel that flashing through SP Tool is quite cumbursome..
HIT THANKS IF I HELPED U
Sent from my JMP V13 using xda app-developers app

@abhi007 said:
Hi ,
I am new to the forum and recently started using custom roms..
I was installing the "rayne rom" using cwm and after formatting data and system..it stopped suddenly and gave a message "symlink failed"
Now the phone does not reboot to CWM recovery and only the previous Devs boot logo comes...PLEASE help...I think i may have bricked it.
Click to expand...
Click to collapse
Don't worry bro! Try to boot into CWM again because it should be there. Then try to flash the ROM again...
And remember, in future, always take a Nandroid backup before you install anything, mod or ROM. It really helps in case something goes wrong and phone stops working,

ibshar said:
Then you need to flash the stock ROM with SP Flash tool
Click to expand...
Click to collapse
Hey,
I tried flashing using SP tools but it is coming USB device not recognized.(i have installed the drivers in my pc)..... is there any other tool to recover my phone?
Since SP tools does not recognize the device.. it stays at 0%...
Any suggestion is welcome...pls..

@abhi007 said:
Hey,
I tried flashing using SP tools but it is coming USB device not recognized.(i have installed the drivers in my pc)..... is there any other tool to recover my phone?
Since SP tools does not recognize the device.. it stays at 0%...
Any suggestion is welcome...pls..
Click to expand...
Click to collapse
None of the tools will work unless you install the correct Drivers.. So install teh drivers that are given in the SP Flash tool thread and then try.

@abhi007 said:
Hey,
I tried flashing using SP tools but it is coming USB device not recognized.(i have installed the drivers in my pc)..... is there any other tool to recover my phone?
Since SP tools does not recognize the device.. it stays at 0%...
Any suggestion is welcome...pls..
Click to expand...
Click to collapse
I Also Face The Problem With SP Tools 0% Problem Take Out The USB Cable And Insert It Again And After 30-40 Seconds It Will Show The Process Completed 100% And Green Ring Will Be There
Sent from my Micromax A110 (Canvas 2) using xda premium

@abhi007 said:
Hey,
I tried flashing using SP tools but it is coming USB device not recognized.(i have installed the drivers in my pc)..... is there any other tool to recover my phone?
Since SP tools does not recognize the device.. it stays at 0%...
Any suggestion is welcome...pls..
Click to expand...
Click to collapse
see the video below

non of the driver is working, my phone keeps disappearing on device manager it is hard bricked. i installed one custom rom from xda and after rebooting system it is not at all responding either to charging and not to recovery opption also please help bro

Bricked XOLO Q3000 (SOLVED)

Bricked XOLO Q3000 (Once Again)
Bricked my XOLO Q3000 Kitkat while trying to install PhilZ custom recovery.Now its stuck in boot loop(the XOLO logo keeps appearing again and again).I backed up the stock boot.img and recovery.img through FlashifyI even tried installing stock recovery through mtk droid tools but to no avail.Now what to do??

SOLVED
No matter how much you brick your phone,there is a mode called Factory Mode.Open it by holding vol down key+ Power .Then select format emmc and DONE.So I've become quite of an engineer ..

Haldar_dhruv said:
No matter how much you brick your phone,there is a mode called Factory Mode.Open it by holding vol down key+ Power .Then select format emmc and DONE.So I've become quite of an engineer ..
Click to expand...
Click to collapse
How u flashed the philz recovery??
There is no way u can brick ur deivce while flashing recovery if u follow the methods given here.
U can always press the thanks button if ur using any stuff of any dev.
Formatting emmc means formatting ur internal storage too.
ur all data on internal storage will be gone

Bricked Again
This time it happened when I was editing the build.prop .I saved the file as I had the original build.prop file backed up.Then I thought I should restore it.I copied the build.prop file from my sdcard and overwrited it to /system .But now its again struck in boot loop.I just need access to the phone storage so that I can try to replace it again.What should I do???

help help help... avi
i flashed twrp 2.8.0.0, then tried installing hny15 8/1/2015 rom but installation failed , then flashed philz recovery through twrp then reboot but stucked on xolo boot logo. trying to go to recovery but xolo logo flashes again n again, what to do now brother. HELP..! PLZZZZZzzzz,..
:crying:

Xolo Q3000 stuck in Boot Loop
Haldar_dhruv said:
No matter how much you brick your phone,there is a mode called Factory Mode.Open it by holding vol down key+ Power .Then select format emmc and DONE.So I've become quite of an engineer ..
Click to expand...
Click to collapse
Hi,
I tried to flash the twrp custom recovery via a flash tool on my device post which the device got stuck in boot loop. Now when i am trying to flash the recovery or even trying to install stock rom nothing is working the device does get recognized on any pc or laptop in spite of the drivers being there... i am new to all this would really appreciate your help in fixing this.

Su007 said:
Hi,
I tried to flash the twrp custom recovery via a flash tool on my device post which the device got stuck in boot loop. Now when i am trying to flash the recovery or even trying to install stock rom nothing is working the device does get recognized on any pc or laptop in spite of the drivers being there... i am new to all this would really appreciate your help in fixing this.
Click to expand...
Click to collapse
Solution : Visit http://forum.xda-developers.com/show...74&postcount=1
"This method is useful for warranty purposes and also for UNBRICKING !!!!
U can revert back to normal rom from any possible bad situations like soft brick or hard brick.
Also u can enjoy ur stock rom.
U will need sp flash tools and flash files."
SEE THE CATEGORY : INSTALL STOCK FIRMWARE
download the flash files and follow the guide
Ask avi3230 as I am not that much experienced,He helped me

GauravBak said:
i flashed twrp 2.8.0.0, then tried installing hny15 8/1/2015 rom but installation failed , then flashed philz recovery through twrp then reboot but stucked on xolo boot logo. trying to go to recovery but xolo logo flashes again n again, what to do now brother. HELP..! PLZZZZZzzzz,..
:crying:
Click to expand...
Click to collapse
Solution : Visit http://forum.xda-developers.com/showpost.php?p=55599274&postcount=1
"This method is useful for warranty purposes and also for UNBRICKING !!!!
U can revert back to normal rom from any possible bad situations like soft brick or hard brick.
Also u can enjoy ur stock rom.
U will need sp flash tools and flash files."
SEE THE CATEGORY : INSTALL STOCK FIRMWARE
download the flash files and follow the guide
Ask avi3230 as I am not that much experienced,He helped me :cyclops:

The Most Important Page
Before u do anything with your beloved XOLO Q3000 visit and bookmark this link http://forum.xda-developers.com/showpost.php?p=55599274&postcount=1
If problem solved hit the Thanks button

Haldar_dhruv said:
This time it happened when I was editing the build.prop .I saved the file as I had the original build.prop file backed up.Then I thought I should restore it.I copied the build.prop file from my sdcard and overwrited it to /system .But now its again struck in boot loop.I just need access to the phone storage so that I can try to replace it again.What should I do???
Click to expand...
Click to collapse
try too flash again the original roms via stock recovery..

Haldar_dhruv said:
Bricked my XOLO Q3000 Kitkat while trying to install PhilZ custom recovery.Now its stuck in boot loop(the XOLO logo keeps appearing again and again).I backed up the stock boot.img and recovery.img through FlashifyI even tried installing stock recovery through mtk droid tools but to no avail.Now what to do??
Click to expand...
Click to collapse
Try flashing the ctr recovery! use flashify and flash either the zip file or the img file! This should work
worked for me

MIUI ROM Woooooo
Yes I have already solved this post Thanks anyway
EAGERLY WAITING FOR MIUI rom to be uplaoded today by avi
KEEP CHECKING HERE http://forum.xda-developers.com/showpost.php?p=55599274&postcount=1

rashr..
Haldar_dhruv said:
Bricked my XOLO Q3000 Kitkat while trying to install PhilZ custom recovery.Now its stuck in boot loop(the XOLO logo keeps appearing again and again).I backed up the stock boot.img and recovery.img through FlashifyI even tried installing stock recovery through mtk droid tools but to no avail.Now what to do??
Click to expand...
Click to collapse
try to flash recovery.img via rashr... It shoul work for u.

mujaid714 said:
try to flash recovery.img via rashr... It shoul work for u.
Click to expand...
Click to collapse
Thanks But the Problem was already solved, would make some sense for others maybe.
Thanks For Helping

Haldar_dhruv said:
Before u do anything with your beloved XOLO Q3000 visit and bookmark this link http://forum.xda-developers.com/showpost.php?p=55599274&postcount=1
If problem solved hit the Thanks button
Click to expand...
Click to collapse
Hi Haldar,
Can you please guide me through step by step please, I am very new to all these. To try anything, My xolo q3000 is stuck in bootloop and is not getting detected on any PC or even turning on to get it flashed to any software.
Any help would be greatly appreciated.
Thanks
alfamine

alfamine said:
Hi Haldar,
Can you please guide me through step by step please, I am very new to all these. To try anything, My xolo q3000 is stuck in bootloop and is not getting detected on any PC or even turning on to get it flashed to any software.
Any help would be greatly appreciated.
Thanks
alfamine
Click to expand...
Click to collapse
Tell me in detail whatever happened. Try the below procedure also.
No matter how much you brick your phone,there is a mode called Factory Mode.Open it by holding vol down key+ Power .Then select format emmc and DONE

Haldar_dhruv said:
Tell me in detail whatever happened. Try the below procedure also.
No matter how much you brick your phone,there is a mode called Factory Mode.Open it by holding vol down key+ Power .Then select format emmc and DONE
Click to expand...
Click to collapse
I tried to flash to a recovery.img through flashify application and now bricked my phone which is in bootloop now and is neither booting to use other softwares or methods neither is it getting detected on any PCs to flash custom recovery.
I have tried to Volume down + power button and also Volume up + power button to get into recovery menus but none to success,
Just stuck at boot logo of xolo.
Thanks
alfamine

Go to this link here
http://forum.xda-developers.com/q3000/development/xolo-q3000-one-ultimate-thread-t3038259
Then click on unbricking, install adb drivers in pc etc and continue as it says.

help!!! MY recovery mode and fastboot is missing!

Please help me since i flash the TWRP Recovery mode to install exposed my phone is unable to enter FAStboot and recovery every time i reset my phone it only go to "OPPO" loggo and restart after that nothing will happen
And after that i try to flash a Recovery via pc but it cant enter im recovery mode
now i try to flash again a TWRP File but it goes Bootloop it only restart a milion times but it does not boot i only boot in "OPPO" loogo again ang again

https://forum.xda-developers.com/showpost.php?p=68170401&postcount=5

x36023x36023 said:
https://forum.xda-developers.com/showpost.php?p=68170401&postcount=5
Click to expand...
Click to collapse
can this work on f1s?

no