After spending my entire Saturday trying in vain to get my win 7 laptop to recognize my captivate I've decided I need to reach out for some help.
Right when I gore my phone, without too much hassle I did the superoneclick root via my pc with great success. Did the lagfix after that and all was well. Go me right?
I used my phone for a little bit and decided that it was time to but sonera music and pictures on it. This is where it all went wrong.
For background, I have done up to this Point: tried both driver sets that are floating around (and exe and the version most often linked to in help threads with a simple setup file), Ive tried kies, I've tried going into device manager to manually locate the divers. Nada.
At this point the drivers with the setup file will no longer install because the install of the exe screwed up at some point. Windows is only showing the device as us composite hub or as a unknown device. I can sometimes get it to say Samsung android usbb device but it shows that it is in error and it still wot see the phone. Someone else asked me if I had used the mount option when I comes up in my notifications bar which I haven't because it never gives me the option. I've tried disabling launcherpro, undoing the root, undoing the lagfix, formatting and wiping user data on the phone, still nada. I've tried all usb modes. Nada.
First things first, can someone explain to me exactly what I should do in device manager to get the drivers in order? I'm pretty sure this is the root of my problem. Any idea on how to get rid of the erroneous drivers that are causing the driver setup to fail?
Any help would be great :S
Need to try and manually remove three old drivers, then try and re install. Id suggest using the ones design gears posted on his one click back to stock post
Sent from my SAMSUNG-SGH-I897 using XDA App
I snipped this from one of my old posts in the Vibrant section...
For those of you having a problem with Windows 7 recognizing your Vibrant ... here is how I fixed it on my system.
*Note: You do not need to load any special USB drivers for your phone to be recognized in Mass Storage mode in Windows 7.
*Warning: You follow these instructions at your own risk ... no screaming at me if you try it and something gets screwed up!
1) Navigate your way into the Device Manager / Universal Serial Bus Controller
2) Uninstall the device(s) "USB Root Hub" (My system had 2 listed)
3) You will lose mouse and keyboard control (because you just removed the USB Hubs)
4) Reset your PC and allow Windows to boot normally.
5) Go back to the device manager and wait for all of the "!" marks to go away as windows re-installs the USB Hubs and reinitializes all of your devices.
6) Make sure your Vibrant is in mass storage mode and has USB debugging OFF
7) Plug in your Vibrant via the USB cable and be amazed as windows recognizes your device and assigns the drive letters. After you select the mount option on your phone you will have normal access via windows explorer.
Hope this helps some of you out there !!!
~Stresa
Sent from Samsung Vibrant
thanks for the good responses guys but both of those have failed. Odin cant even see my phone, same issue with superoneclick root. I even just tried on an enitrely different PC and got the same "device could not start" message.
tried deleting all the drivers for the USB devices. nada. still no connection
Subrock said:
After spending my entire Saturday trying in vain to get my win 7 laptop to recognize my captivate I've decided I need to reach out for some help.
Right when I gore my phone, without too much hassle I did the superoneclick root via my pc with great success. Did the lagfix after that and all was well. Go me right?
I used my phone for a little bit and decided that it was time to but sonera music and pictures on it. This is where it all went wrong.
For background, I have done up to this Point: tried both driver sets that are floating around (and exe and the version most often linked to in help threads with a simple setup file), Ive tried kies, I've tried going into device manager to manually locate the divers. Nada.
At this point the drivers with the setup file will no longer install because the install of the exe screwed up at some point. Windows is only showing the device as us composite hub or as a unknown device. I can sometimes get it to say Samsung android usbb device but it shows that it is in error and it still wot see the phone. Someone else asked me if I had used the mount option when I comes up in my notifications bar which I haven't because it never gives me the option. I've tried disabling launcherpro, undoing the root, undoing the lagfix, formatting and wiping user data on the phone, still nada. I've tried all usb modes. Nada.
First things first, can someone explain to me exactly what I should do in device manager to get the drivers in order? I'm pretty sure this is the root of my problem. Any idea on how to get rid of the erroneous drivers that are causing the driver setup to fail?
Any help would be great :S
Click to expand...
Click to collapse
kies or mass storage?
for kies debugging in settings>aplications must be disabled. i dont remember what works better ask on connection or to have connection type preset in settings>applications>usbsettings. im on froyo which works a million times better, kies on jf6 was like a 90% fail rate. it just didn't work for me.
for mass storage you need to mount the phone from a message in the notification bar, even if it asks the connection type and you tick mass storage it will not be mounted, you still need to mount from the notification bar.
you can also mount the sdcards from the notification bar in debugging mode which bypasses the connection type setting in settings>applications>usbsettings.
i tend to leave debugging on in case i need adb to fix my phone, i only turn it off to use kies which is useful to fix my contacts when i have multiples (it's alot easier to fix 200+ contacts on a computer screen using a mouse and keyboard), or install an update if i choose to run the phone stock.
tried in every combination of modes, cant get it connect any possible way. I also dont get the option to mount it from the notification bar so perhaps I have a hardware issue.
Are you using the stock usb cable? I've had problems with some but not all generic cables.
Sent from my SAMSUNG-SGH-I897 using XDA App
may not be what you want to hear
I actually had a similar problem, though not the same. My phone charges and I can use mass storage without issue, but I could not get Odin One Click updaters to ever "see" my phone. I tried every USB port on my box, tried several different driver sets (including the ones DG recommends). Eventually, I tried on a different computer. Odin saw it fine, updated no problems, first time out of the gate.
I know, I know, not everyone has access to two computers, and furthermore there "should" be no reason it can't work on a particular one, but for me, short of formatting my PC and reinstalling OS, I tried everything else I could think of.
Good luck, either way!
post moved to new thread
I don't think there should be a logical reason as to why this would ever work, but Windows (and computers in general sometimes) has a tendency to surprise me like that... but what if you try removing the drivers by whatever automatic means you are provided with, and then check and remove them manually (if necessary), and finally run CCleaner or some other program with registry cleaning capabilities to give your PC that last little enema.
Then use DG's drivers and install them in whatever way he recommends (been a while since I installed the drivers). That's really all I can think of on the PC side... maybe putting a cheap little USB hub between your phone and your PC if you have one laying around as another mostly futile attempt.
Fair warning, it is possible for CCleaner to mess up your PC... any program that messes with the registry can potentially do so. I've never seen the program cause harm, but it is possible.
I've had the same problem with my Crappy from day one. I still somehow got SuperOneClick to Root my phone through multiple attempts. But if all you need to do is transfer files from your phone to PC, and vice versa. I would recommend Android Sync Manager. It can read most of the file systems in the phone, and transfers at a decent speed.
same here
One of my PCs recognizes Cappy with the same cable, OS, drivers. Other one doesn't.
So I ended up using "ADB Wireless" from Market. It works pretty good, slower than USB, but works.
Also - if you are willing to make your PC work - try fresh reinstall of Windows 7SP1 and disable driver update from Internet.
Since your just trying to put music and pictures on the phone, try Kies Air from the market. Install it on your phone then you can transfer files wirelessly with the browser from your computer.
USB Cable
gbrown2036 said:
Are you using the stock usb cable? I've had problems with some but not all generic cables.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
Definitely check the USB cable. I had this exact issue before. I checked drivers, did a bunch of un-installing and manual installing of drivers. Finally I tried my stock USB cable and all worked perfectly!
There are hundreds of threads around the web about this bluetooth issue but none of them seems to answer questions. So, here it goes;
The solution is so simple you won't believe it. (actually you will) The problem is PC not the phone.
Just keep installing the device. I had to remove/add device at least 20 times. At last it just gave up and some "installing driver software" box appeared. When you see this popup it means you've successfully beaten the computer.
It may happen again if you try to send files to your phone without enabling bluetooth.
You might also want to change your phones bluetooth name. This could be just a superstition of myself. I won't try it again just to test it
I've tried a lot of different means but ultimately I want to make sure of something. In regards to Linux, in particular debian, does everyone else have issues with actually keeping the galaxy s 4g connected in USB mode? Here is a rundown of what happens.
1.) Plug in phone and start USB mode
2a.) If left idle all is well and the device stays connected.
2b.) Else the phone disconnects itself during data transfers.
Here are more details to my setup
~ I've experienced this problem with Fedora 14 >, OpenSuse, Ubuntu, Linux Mint
~ Currently using debian(latest version squeeze).
~ Phone is running FB VahallaBlack with Subtly Modified Stock with CWM5 + Voodoo Lagfix
~ USB Debug mode is off
~ There are no tweaks active to my knowledge.
That's all the information that comes to mind, if anything else is needed please let me know and I'll post it. I dual boot windows and debian and I'd rather my phone work on both OS and not just one.
I use Ubuntu and I have this same issue. I just began either syncing over Dropbox or plugging my sd card directly into the computer. I've tried Googling the issue, but was unable to find a solution. If you don't wanna do either of these, and you hate switching to Windows just to transfer **** (as I did), you should perhaps try running a virtual instance of Windows and transferring the files on that.
adobrakic said:
I use Ubuntu and I have this same issue. I just began either syncing over Dropbox or plugging my sd card directly into the computer. I've tried Googling the issue, but was unable to find a solution. If you don't wanna do either of these, and you hate switching to Windows just to transfer **** (as I did), you should perhaps try running a virtual instance of Windows and transferring the files on that.
Click to expand...
Click to collapse
Sad to say I've tried all of that. Virtual instances of windows are worse from my experience as there were time where the VM actually found the phone and there were times it didn't, mostly didn't. Best possible thing I see myself doing is using a SD converter to do the transfers. What I don't understand is that A LOT of this tech today uses linux in some way or another. Hell some of them have linux controlling the most basic level functions with another software to handle UI on top of it. Yet when it comes to actually working with linux through said UI you get issues like this. Thanks for the reply, I'll continue to check back here for most of the day but I'm assuming most of the replies will be the same.
Ok, so I have someone's Kyocera Kona S2151 flip phone. Now when I plug it into my pc in device manager there shows two "modems" and a serial port without a driver. Even after installing the specific driver for this phone from the Kyocera website it still says there is no driver. I tried to manually select the driver from the folder that was created during the install, not a single one of the 6 worked. Now all of this might even be a moot point as I don't even know if this device will allow me to pull the pictures off of it using a USB cable attached to a pc and everything on the web says I should be able to but there's also a Kona android smart version. I also can't find anything that says I can't either lol. Now I would Bluetooth but there are no options for sending photos via Bluetooth and whats worse is the antennae for the cell service is going out so it won't stay connected to the tower (I assume its the antennae, I'm not gonna try and fix something this old, also its sprint which just got absorbed by Tmobile which could also be the issue bc its pre sim card).
So, in summary, I am trying to retrieve the photos. You can't Bluetooth them, there's no SD card slot, I can't text or email them due to lack of wifi and cell service issues, Which leads to the only option left, PC USB transfer but I can't get that working either due to what I am hoping is simply driver issues. If I need to use an older Operating system that's fine I have another pc here I can mess with to my heart's desire.
I know this isn't android, rooting, modding, custom os, related but this forum is home to some of the smartest people, it's where I come to get all my instructions and files for phones. if anyone could help I'm hoping it's the community here.
Oops, just saw the "don't post questions here" my bad... sry
Update, I installed xp on an older pc I had sitting around. ALL drivers worked fine BUT it appears the only functionality this phone would have for a pc is to act as a modem. There doesn't seem to be ANY functionality in the way of file browsing or retrieving media. Furthermore, this specific phone lacks media sharing over any other connection aside from the mobile network. So if anyone has one of these old phones and it no longer has service/can no longer connect to towers your only option is going to be a data retrieval company.
Bummer, some older phones are very limited when it comes to retrieval. cheers
Ok, so I have someone's Kyocera Kona S2151 flip phone. Now when I plug it into my pc in device manager there shows two "modems" and a serial port without a driver. Even after installing the specific driver for this phone from the Kyocera website it still says there is no driver. I tried to manually select the driver from the folder that was created during the install, not a single one of the 6 worked. Now all of this might even be a moot point as I don't even know if this device will allow me to pull the pictures off of it using a USB cable attached to a pc and everything on the web says I should be able to but there's also a Kona android smart version. I also can't find anything that says I can't either lol. Now I would Bluetooth but there are no options for sending photos via Bluetooth and whats worse is the antennae for the cell service is going out so it won't stay connected to the tower (I assume its the antennae, I'm not gonna try and fix something this old, also its sprint which just got absorbed by Tmobile which could also be the issue bc its pre sim card).
So, in summary, I am trying to retrieve the photos. You can't Bluetooth them, there's no SD card slot, I can't text or email them due to lack of wifi and cell service issues, Which leads to the only option left, PC USB transfer but I can't get that working either due to what I am hoping is simply driver issues. If I need to use an older Operating system that's fine I have another pc here I can mess with to my heart's desire.
I know this isn't android, rooting, modding, custom os, related but this forum is home to some of the smartest people, it's where I come to get all my instructions and files for phones. if anyone could help I'm hoping it's the community here.
**Reposted here bc I posted in the wrong area earlier.**
steve60914 said:
Ok, so I have someone's Kyocera Kona S2151 flip phone. Now when I plug it into my pc in device manager there shows two "modems" and a serial port without a driver. Even after installing the specific driver for this phone from the Kyocera website it still says there is no driver. I tried to manually select the driver from the folder that was created during the install, not a single one of the 6 worked. Now all of this might even be a moot point as I don't even know if this device will allow me to pull the pictures off of it using a USB cable attached to a pc and everything on the web says I should be able to but there's also a Kona android smart version. I also can't find anything that says I can't either lol. Now I would Bluetooth but there are no options for sending photos via Bluetooth and whats worse is the antennae for the cell service is going out so it won't stay connected to the tower (I assume its the antennae, I'm not gonna try and fix something this old, also its sprint which just got absorbed by Tmobile which could also be the issue bc its pre sim card).
So, in summary, I am trying to retrieve the photos. You can't Bluetooth them, there's no SD card slot, I can't text or email them due to lack of wifi and cell service issues, Which leads to the only option left, PC USB transfer but I can't get that working either due to what I am hoping is simply driver issues. If I need to use an older Operating system that's fine I have another pc here I can mess with to my heart's desire.
I know this isn't android, rooting, modding, custom os, related but this forum is home to some of the smartest people, it's where I come to get all my instructions and files for phones. if anyone could help I'm hoping it's the community here.
**Reposted here bc I posted in the wrong area earlier.**
Click to expand...
Click to collapse
It seems that now the only way is to have the driver work and then use PC USB transfer. In addition to the driver from the Kyocera website, have you tried the Google Android USB Driver for Windows? It's available on the Android Developer website. Have a try. Good luck to you.
Flip phone, not an anroid