Hi,
I just change provider to AT&T using my XT925. I don't see the 4G LTE logo. How do I know it is actually working?
chiquito3 said:
Hi,
I just change provider to AT&T using my XT925. I don't see the 4G LTE logo. How do I know it is actually working?
Click to expand...
Click to collapse
Could someone tell me how to enable LTE in the XT925 on AT&T using stock rom or with any other rom? All I get is H+
Which country did you get your phone from? It may not support the AT&T LTE bands...
Sumanji said:
Which country did you get your phone from? It may not support the AT&T LTE bands...
Click to expand...
Click to collapse
It is from Claro PR and the box says it is 4G LTE.
I only get H+ at less than 7 Mbps down and no more than 1mbps up. With my S4 I get between 6 to 22 mbps down and 5 to 12 up.
Any Idea what could be the problem. I'm using the stock ClaroPR firmware posted here and all I get is H+.
Any one there that could help me?
chiquito3 said:
Any one there that could help me?
Click to expand...
Click to collapse
Hello, try 'notification toggle.apk', to force 'up or down' the 2g-3g-4g !
chiquito3 said:
Any one there that could help me?
Click to expand...
Click to collapse
Claro LTE works on 07 band (2600 MHz) and AT&T works on 04 band (1700 MHz).
Regards
RJ
Yeah there are basically two versions of the GSM LTE RAZR HD - one supports 700 / 1700 / 2100 and I think is only available in Canada, whilst the other version supports 800 / 1800 / 2600, and is available in Lat Am and Europe.
Sounds like you have the second version, which as rafjak says, will not work with either T-Mobile or AT&T LTE
You can't use LTE, it's not compatible.
Vicious1984 said:
You can't use LTE, it's not compatible.
Click to expand...
Click to collapse
Too bad!
Thanks for clarifying that!
But can this issue be resolved flashing other modem?
chiquito3 said:
But can this issue be resolved flashing other modem?
Click to expand...
Click to collapse
Just flash a rom with the correct modem. I dont which one has the correct ones for at&t.
Or you can always flash a custom rom.
Sometime ago i was using brazils jellybean when i live in mexico. I just added mexicos modem files to the brazil rom.
Sent from my RAZR HD using Tapatalk
hugodefcon said:
Just flash a rom with the correct modem. I dont which one has the correct ones for at&t.
Or you can always flash a custom rom.
Sometime ago i was using brazils jellybean when i live in mexico. I just added mexicos modem files to the brazil rom.
Sent from my RAZR HD using Tapatalk
Click to expand...
Click to collapse
I'm a little confused now! So does that mean that the problem could be fixed flashing other modem? If that is correct could some one point out which one should I use to work with At&t 4G LTE?
chiquito3 said:
I'm a little confused now! So does that mean that the problem could be fixed flashing other modem? If that is correct could some one point out which one should I use to work with At&t 4G LTE?
Click to expand...
Click to collapse
If the only problem is not having lte then yes.
The modem is flashed since the beggining. So you would need to reflash you rom.
You extract the modem file from what ever rom has the correct file had replace the one youre using. Or simply flash a rom with the correct modem file.
I had the brazil retail rom since it is bloatless from the get go.
Sent from my RAZR HD using Tapatalk
hugodefcon said:
If the only problem is not having lte then yes.
The modem is flashed since the beggining. So you would need to reflash you rom.
You extract the modem file from what ever rom has the correct file had replace the one youre using. Or simply flash a rom with the correct modem file.
I had the brazil retail rom since it is bloatless from the get go.
Sent from my RAZR HD using Tapatalk
Click to expand...
Click to collapse
Well I can tell that with At&t as provider I get H+ with data.
Can any one confirm if I could get LTE by flashing other modem and what modem should I use?
I just downloaded and tried Rogers Canada Modem and it did not work. All I still get is H+.
I'm using a Fido RAZR HD (original, not reflashed), and it works fine on T-Mobile LTE (same bands at AT&T I think).
Are you sure you have an LTE-capable SIM card? And also your plan includes LTE access? Are you using a direct AT&T plan, and not an MVNO (e.g. Aio).
Su
Sumanji said:
I'm using a Fido RAZR HD (original, not reflashed), and it works fine on T-Mobile LTE (same bands at AT&T I think).
Are you sure you have an LTE-capable SIM card? And also your plan includes LTE access? Are you using a direct AT&T plan, and not an MVNO (e.g. Aio).
Su
Click to expand...
Click to collapse
Yes I'm sure I have LTE card and plan. I understand that T-Mobile Band is completely different from AT&T band... or am I incorrect?
I found this on Wikipedia and it seems that they are not so different. Can someone explain this to me?
Operator Country Frecuency (MHz) Band
AT&T Puerto Rico 700 c 17
AT&T Puerto Rico 1700 d e 4
Claro PR (PRTC) Puerto Rico 700 b 17
T-Mobile PR Puerto Rico 1700 f 4
So, I have LTE that only works on AT&T frequencies... I need it to work on the Europe frequencies 800/1800/2600. Is there a way I can change the modem files without reflashing? I got root, but locked bootloader... :s
I have the same issue. I have phone from Claro PR but I am from Europe. The LTE does not working due to wrong frequency.
Should I upload a new modem driver ? or should I flash my phone ? What is less harmful for my phone
My phone is rooted and I have unlocked bootloader.
Related
I have brought an unlocked version skyrocket from at&t. Since I stay in India, we don't have a 4G and it's shame to say not even full 3G coverage here as of yet.
My question is when I move into 3G coverage area I see 4G instead of 3G and I feel battery drains quite fast during data usage under 3G (or 4G for phone). So I heard in Roger version of skyrocket and some custom roms allow switching off 4G completely ( 4G/LTE/HSPA+). So does cyanogenmod 9 allow such feature to disable 4G connectivity which is not there on at&t rom? Anybody who has already flashed CM9 on at&t skyrocket can reply so I can root this device and go for CM9 or other stable that allows such feature.
Thanks.
Sent from Tapatalk 2
Samsung Skyrocket - Stock
Motorola Atrix 2 - Stock
Samsung Galaxy S - CM9 stable
Yes
Where in India..? How did u manage to get carrier signals... I struggled a lot to get the signals, I had to flash stock ics uclf6.. may b d radio in it was the thing did it...
Into the topic,.. yes u can switch 2g/3g... you don't need to root ur phone... u can flash a recovèry using Odin.. then flash the custom rom... u get root if the rom is pre rooted... if not u can flash su... I'm using sky ics now but I'm unable to switch network mode.. people say it might b radio prob..
Pls post back if u succeed with cm9..
Thank u..
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Yes, CM9 allows it. I'm on TeamChopsticks' CM9 and the option to switch is available in the Wireless and Networks setting.
However, do understand that you need a RAT unlocked radio. That's actually what allows you to switch to 2G on the skyrocket -- having a RAT unlocked radio. You can find a list of radios in this thread.
Hi!
That's what I was about to say: if I understood correctly what I read, having a ROM that allows you to choose between network modes (LTE/HSPA/GSM) is not sufficient. Your radio should also be unlocked -- like Rogers' radio. Changing the settings in your ROM when you use a locked radio -- like AT&T's radio -- would have no effect.
I've tried using this feature in CM9 and it doesn't seem to work. It was noted on their list of problems but I don't know if it was ever resolved. I have an unlocked RAT and I still can't get it to work right. Somewhat annoying because during the day I'd like to have it to save battery, but basically I gave up on trying to get it to work.
Try using this code *#*#197328640#*#*
leechgod27 said:
Try using this code *#*#197328640#*#*
Click to expand...
Click to collapse
Sorry that doesn't seem to work. That may only work in Touchwiz based OSes, but in CM9 it's not doing anything.
Reported this belongs in q&a or the developers thread itself not in the general section.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
So does it work in Sky-ICS? Im on AT&T so if I am going to install the rom for the first time what radio would I use?
Yes, I have rooted my new skyrocket with cwm touch recovery and flashed CM9 Stable version and it seems to working perfectly for me. .
Let me know if you face any problem and if you are from India. Will try to help if I could :beer:
Sent from Tapatalk 2
Samsung Skyrocket - CM9 Stable
Motorola Atrix 2 - Stock
Samsung Galaxy S - CM10 nightly
I know it works on my ROM (EMBRYO) always had this feature since I travel to India it works perfect. You need to be SIM unlocked and a RAT unlocked RADIO (like any Rogers RADIO NOT ATT)..
mohan_kr said:
I know it works on my ROM (EMBRYO) always had this feature since I travel to India it works perfect. You need to be SIM unlocked and a RAT unlocked RADIO (like any Rogers RADIO NOT ATT)..
Click to expand...
Click to collapse
You mean I need to unlock my phone in order to get this to work? I didn't have to fully unlock my Nexus 1 to do it. Is it different with the Skyrocket?
No you have to use a rogers radio rat unlocked isn't the same as unlocking the phone
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Illnevertell said:
No you have to use a rogers radio rat unlocked isn't the same as unlocking the phone
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
That's what I figured but I have an unlocked RAT (I727RUXLF3) on AT&T and I still can't get it to switch to 2G on CM 9.1..
dvandam said:
That's what I figured but I have an unlocked RAT (I727RUXLF3) on AT&T and I still can't get it to switch to 2G on CM 9.1..
Click to expand...
Click to collapse
Huh? I guess I must have worded it differently. You need to be SIM Unlocked AND have a RAT Unlocked radio, to change the preferred network mode (at least on I727)...sigh..
mohan_kr said:
Huh? I guess I must have worded it differently. You need to be SIM Unlocked AND have a RAT Unlocked radio, to change the preferred network mode (at least on I727)...sigh..
Click to expand...
Click to collapse
Ok thanks.
mohan_kr said:
Huh? I guess I must have worded it differently. You need to be SIM Unlocked AND have a RAT Unlocked radio, to change the preferred network mode (at least on I727)...sigh..
Click to expand...
Click to collapse
Ok I am now SIM unlocked and Rat Unlocked and it STILL won't toggle over. Any Ideas?
odin to rogers stock flash rogers stock ics modem first. Then root and install cm9.
If that doesn;t work try the same process just use rogers gb
the att modem does strange things with network selection. It works for me when I dont use automatic network selection
tjsooley said:
odin to rogers stock flash rogers stock ics modem first. Then root and install cm9.
If that doesn;t work try the same process just use rogers gb
the att modem does strange things with network selection. It works for me when I dont use automatic network selection
Click to expand...
Click to collapse
I tried doing the ODIN with the Rogers ROM and it kept failing. I had to then install a custom recovery and then flash CM9.1 and it still didn't work. Before trying this I tried another ROM (Embryo) to see if that could toggle and it couldn't either. :crying:
Hey guys
Flashed my Telstra i9305T with the unbranded hong Kong firmware from Sammobile using Odin today, all went well except no matter what I do I can't get it to connect to Telstra 4G. Only data I can get is HSDPA+. I've set all the APIs up but still mothkng . Has anyone else had this issue or know what can can do to fix it? I've spent all night on Google and can't find squat
Any help is greatly appreciated otherwise I'll attempt to ref lash the Telstra bloated from tomorrow
Cheers
1st wrong section. Should be Q&A
2nd flash a 9305T modem. That will then give you 4g back.
Sent from my GT-I9305 using XDA Premium HD app
If a mod can move this that would be great.
Also is there a way I can keep the unbranded hong kong firmware but flash a Telstra modem?
im not using custom roms just stock Sammy firmware as I haven't unlocked/rooted the phone?
Lordz89 said:
If a mod can move this that would be great.
Also is there a way I can keep the unbranded hong kong firmware but flash a Telstra modem?
im not using custom roms just stock Sammy firmware
Click to expand...
Click to collapse
Yes, the modem can be flashed on its own, here they all are.
http://forum.xda-developers.com/showthread.php?t=2010116&highlight=modem
Thanks for the replies guys
so I have no choice but to CWM and root it I take it
that being the case
is this the correct procedure for i9305T
http://forum.xda-developers.com/showthread.php?t=1914394
Coming from nexus devices only so its a little more complex than im used to haha
OK have installed CWM. do I need root to flash the modem or is cwm enough?
Basicaly once I have Hongkong firmware and can flash the modem that's all I want to do so the less extra stuff I need to put on it the better
ok guys
thanks for putting up with my noobishness.
I have now got HK firmware, CMW and Telstra modem running and have 4g again
Big thanks to you both.
Just wanting to confirm ill now have to manuall flash updates from sammmobile as the combo of modem and firmware wont allow OTA's.
each time I flash the latest version of JB/KLP ill need to reload the Telstra modem (unless there is a newer version)
Thanks for all your help again.
Cheers
Lordz
Which modem did you flash?
Sent from my GT-I9305 using xda premium
DVALI5 - the Telstra modem
Filipiak said:
Which modem did you flash?
Sent from my GT-I9305 using xda premium
Click to expand...
Click to collapse
Cheers.
Sent from my GT-I9305 using xda premium
If you have a 9305t with telstra you can use either one of the 9305t modems. I haven't done a speed test but for me I am getting a better signal strength with the newer UBALK2 modem then with the DVALI5. I have a 9305t on the telstra network
edit: did a quick speed test and got about 10mb/s quicker download and about 7mb/s slower upload then dvali5. This is in the middle of Maroochydore on the Sunshine Coast, but I believe speeds will vary with network congestion
Sent from my GT-I9305 using XDA Premium HD app
Awesome thanks
Sent from my GT-I9305 using xda premium
txr33 said:
If you have a 9305t with telstra you can use either one of the 9305t modems. I haven't done a speed test but for me I am getting a better signal strength with the newer UBALK2 modem then with the DVALI5. I have a 9305t on the telstra network
edit: did a quick speed test and got about 10mb/s quicker download and about 7mb/s slower upload then dvali5. This is in the middle of Maroochydore on the Sunshine Coast, but I believe speeds will vary with network congestion
Sent from my GT-I9305 using XDA Premium HD app
Click to expand...
Click to collapse
Cheers mate
Hopefully at least one of Telstra or Optus continue making improvements for us to work with haha
UBALK2 modem
Hi there,
Could anyone who's using the UBALK2 modem help me, please? I'd like to know if the UBALK2 modem has support to 3G on 1900MHz frequency. Samsung says the I9305TUBALK2 baseband has support to the following frequencies, but I never trust them
3G HSPA+ 850 / 900 / 1900 / 2100 MHZ
4G LTE 800 / 1800 / 2600 MHz
Cheers!
Hey,
Can I flash a Canadian Fido model with the French SFR ROM? It's not a US Droid, so I'm assuming the bootloader is unlocked?
It looks like the Euro model is getting quicker firmware upgrades (they got JB late November, whilst the Canadian model is pending for Q1 2013), so I would prefer to be on that ROM!
Cheers,
Su
Sumanji said:
Hey,
Can I flash a Canadian Fido model with the French SFR ROM? It's not a US Droid, so I'm assuming the bootloader is unlocked?
It looks like the Euro model is getting quicker firmware upgrades (they got JB late November, whilst the Canadian model is pending for Q1 2013), so I would prefer to be on that ROM!
Cheers,
Su
Click to expand...
Click to collapse
Your bootloader is locked, but can be unlocked. I wouldn't recommend going to European firmware though since I've been seeing a lot LTE issues when users switch off of the Rogers ROM. What's another month (or 2-3 weeks) anyways? You might end up spending a lot of time getting your phone to function just how it did on the Rogers firmware.
Sent from my XT925 using Tapatalk 2
Hey,
I'm actually based in the UK, but thinking of picking up a Fido RAZR HD because they are much cheaper over there!
We have only one LTE network at the moment, and I'm not on it I'd prefer to have JB and HSPA+ if possible!
I've just come across this thread http://forum.xda-developers.com/showthread.php?p=35085808
Looks like the Australian ROM is using the new(er) version of JB?!
Thanks,
Su
JB "should" be out at the end of January for our phone claims Rogers. I would at least wait till Feb 1St b4 tinkering
Sent from my XT925 using xda app-developers app
I flashed the Fido Razr HD using an Australian JellyBean sbf with the Rogers modem_signed and fsg_signed files from ICS. Works a beaut, not sure which rom you would use the files for to get it working in the UK though. The Australian rom had minimal bloat and I didn't feel like waiting a month for Rogers/Fido to release JB.
Does the Rogers/Fido ROM have a lot of crapware in it?
Not too much... Nothing compared to Verizon! I saw like 7 or 8 bloatware applications when I first got my phone and was able to disable all of the apps I.don't use. Heck, they didn't even pre-load an ebook software!
Sent from my XT925 using Tapatalk 2
Hey I just rooted my fido razr hd and I am wondering where you got those specific files and how you used them when flashing the Australian sbf.
Do you know if you can revert to the fido rom if you ever wanted?
Thanks in advance
Sent from my XT925 using xda app-developers app
skpamnani said:
Hey I just rooted my fido razr hd and I am wondering where you got those specific files and how you used them when flashing the Australian sbf.
Do you know if you can revert to the fido rom if you ever wanted?
Thanks in advance
Sent from my XT925 using xda app-developers app
Click to expand...
Click to collapse
I got them from the Fido/Rogers ICS rom. I opened the JellyBean rom with 7-zip and dragged and dropped the files along with an xml file found here: http://forum.xda-developers.com/showthread.php?t=2054906
I missed a step when doing it and missed putting the fsg file in there and was without LTE, I was then able to use a fastboot script to flash it after. I have attached the script and fsg file. The modem file can be found in the referenced thread. You also need to have an unlocked bootloader.
I'm fairly certain we are able to SBF to the Rogers/Fido JB when it comes out safely. I would not SBF to a prior firmware like ICS myself....and why would you want to?
coolloser said:
I got them from the Fido/Rogers ICS rom. I opened the JellyBean rom with 7-zip and dragged and dropped the files along with an xml file found here: http://forum.xda-developers.com/showthread.php?t=2054906
I missed a step when doing it and missed putting the fsg file in there and was without LTE, I was then able to use a fastboot script to flash it after. I have attached the script and fsg file. The modem file can be found in the referenced thread. You also need to have an unlocked bootloader.
I'm fairly certain we are able to SBF to the Rogers/Fido JB when it comes out safely. I would not SBF to a prior firmware like ICS myself....and why would you want to?
Click to expand...
Click to collapse
Thanks alot for this did you unlock the bootloader with the official motorola site? I don't like the idea of losing all warranty even though the phone seems to be built very nice
Sumanji said:
Does the Rogers/Fido ROM have a lot of crapware in it?
Click to expand...
Click to collapse
I have the fido one,
crapware, honestly about 4 apps, just like myaccount, vvm, ringtones and shop.
But when they sold me my phone it was apparently a Fido/Rogers verison, and i had to return the phone, then i got my new one i never hit SIM CONFIGURATION when it booted and now my rom is completely stock from factory, no crapware whatsoever! not even a fido boot screen.
skpamnani said:
Thanks alot for this did you unlock the bootloader with the official motorola site? I don't like the idea of losing all warranty even though the phone seems to be built very nice
Click to expand...
Click to collapse
I did, warranty's are made to be broken right?! lol
If I ever had a defect; I would return it to Fido anyways...they have no idea if it's been unlocked nor would they care to check.
Just a little warning for you ...
if you use a rogers/fido on UK :
you can flash any firmware with any radio file ... but YOU NEVER GET LTE ( NOT SAME BAND IT S HARDWARE NOT SOFTWARE )... and Rogers/Fido phone don't have dual carrier chip (42mbits)... only hspa+ chip (21 mbits)
if i have the choice i prefer pay 50 $ more to get lte or dc hspa ...
o2qc418 said:
Just a little warning for you ...
if you use a rogers/fido on UK :
you can flash any firmware with any radio file ... but YOU NEVER GET LTE ( NOT SAME BAND IT S HARDWARE NOT SOFTWARE )... and Rogers/Fido phone don't have dual carrier chip (42mbits)... only hspa+ chip (21 mbits)
if i have the choice i prefer pay 50 $ more to get lte or dc hspa ...
Click to expand...
Click to collapse
Hmm, well I assumed there would be physical hardware differences, but got different info from another thread:
EdwardN said:
Not exactly true. The XT925 firmware is what determines which radios are active. Having 700/800/1700/1800/2100/2600 all active at the same time would drain the battery like woah. Currently you can merge the radio you need into the rom you want to use, and make it work that way.
Click to expand...
Click to collapse
The DC-HSPA point is a good one though, thanks for the heads up so you're saying the Euro/LatAm model does support it?
Cheers,
Su
Sumanji said:
Hmm, well I assumed there would be physical hardware differences, but got different info from another thread:
The DC-HSPA point is a good one though, thanks for the heads up so you're saying the Euro/LatAm model does support it?
Cheers,
Su
Click to expand...
Click to collapse
For sure the xt925 have two model ... in canada only compatible to hspa up to 21 mbits and lte band 700 and aws ...
European device have dc hspa up to 42 mbis and all others lte band...
In first time this is hardware... after there are the base band... i have test all baseband and i don t get dc hspa with my razr hd
Hey Guys,
I am here to relate an problem that I am having where I live.
The thing is. I have now 4G LTE service and I got a new 5GB 4G data plan...
On the carriers system they say I am ready to go to acces the blazing fast speed they show on commercials.
But the Max I am having is 3G service...
I know I have 4G service because when I search for networks it shows CLARO BR 4G, CLARO BR 3G and CLARO BR 2G.
Can it be related to the ROM I am using?
I am using the Retail BR 4.1.2 with the modem and fsg files from my carriers 4.0.3 ROM.
Can this be related to an old SIM card?
I dont think so, because I changed to this carrier less than one year ago and they say on their website that the 3GReady SIM is also already Ready for 4G.
What else can I do??
Settings -> More... -> Mobile Networks -> Select network and make sure Auto 4G/3G/2G is enabled. I believe Auto 3G/2G is the default one, I know because I do use 4.1.2 Retail BR.
If that doesn't help, you should go to Claro and ask them to either help you enable it or change the SIM card with a 4g enabled one.
The problem was the SIM card.
Got a new one and now I have acces to the 4G network.
Now the problem is that I can't connect on 4G.
I have put all APNs existent on my carrier and it didn't work...
liquelt said:
The problem was the SIM card.
Got a new one and now I have acces to the 4G network.
Now the problem is that I can't connect on 4G.
I have put all APNs existent on my carrier and it didn't work...
Click to expand...
Click to collapse
Look, just in case... have you tried to flash a retail ROM in your phone?
I bought my phone from VIVO and I tried 4G and it wouldn´t work (ICS 4.0.4). Later, I flashed ICS 4.0.4 RETAIL and tried diferent carrier chips and the 4G was running fine on CLARO.
Also, if you can try this on your phone, downgrade from JB to ICS and try your 4G network (and remember that 4G technology is extremely new here in Brazil and reminds when 3G came - the services were bad because of poor infrastructure).
Let´s wait and see.
Abraço! kkk
zilian28 said:
Look, just in case... have you tried to flash a retail ROM in your phone?
I bought my phone from VIVO and I tried 4G and it wouldn´t work (ICS 4.0.4). Later, I flashed ICS 4.0.4 RETAIL and tried diferent carrier chips and the 4G was running fine on CLARO.
Also, if you can try this on your phone, downgrade from JB to ICS and try your 4G network (and remember that 4G technology is extremely new here in Brazil and reminds when 3G came - the services were bad because of poor infrastructure).
Let´s wait and see.
Abraço! kkk
Click to expand...
Click to collapse
Hey Mano! hahah
I am running Retail 4.1.2 with Claro Modem and FSG. What FSG and modem did you flash to get 4G to work?
Now that i can get into the network I am going to test lot of thing to see what is going on...
Thanks again, meu amigo zilian!
liquelt said:
Hey Mano! hahah
I am running Retail 4.1.2 with Claro Modem and FSG. What FSG and modem did you flash to get 4G to work?
Now that i can get into the network I am going to test lot of thing to see what is going on...
Thanks again, meu amigo zilian!
Click to expand...
Click to collapse
Hi i updated mine with reatil but now i have a lot of acess "Acesso Restrito Alterado" problem when i go from "e " to h+...
I tryed to change *#*#4636#*#* com wcdma only to gsm/cdma auto, but no sucess, Where do I find the VIVO modem to flash? only the mondem
I'll try to explain to you.
To get the modem you need to download the full vivo 4.0.4 Rom and extract the modem_signed and fsg_signed.
Then all you have to do is flash both on your phone and erase the modemst1 and modemst2 partitions.
That's everything I can explain walking and typing on the street.
Sent from my RAZR HD using xda app-developers app
4g is active in Rio? I thought it was only being tested in some areas like buzios or angra..
What's the max speed you've gotten?
I've attached what is happening with me...
I live in a area that has lte signal but the network just don't work. It connects but it doesn't change informations with the network.
Here in Rio the network is still in test on Claro... but I can tell Oi has the best signal by far in Rio.
I don't know how or when Claro will finish implementing this technology here, all I know is that they are moving fast. They have until April 31st, so let's see...
Sent from my RAZR HD using xda app-developers app
Thanks bro, but why do i have to erase modem partitions?
and i'm getting this errors
_________________________________________________
fastboot flash modem
fsg_signed
(bootloader) Variable not supported!
target reported max download size of 31457280 bytes
error: cannot load 'fsg_signed': No error
_______________________________________________________
liquelt said:
I'll try to explain to you.
To get the modem you need to download the full vivo 4.0.4 Rom and extract the modem_signed and fsg_signed.
Then all you have to do is flash both on your phone and erase the modemst1 and modemst2 partitions.
That's everything I can explain walking and typing on the street.
Sent from my RAZR HD using xda app-developers app
Click to expand...
Click to collapse
liquelt said:
Hey Mano! hahah
I am running Retail 4.1.2 with Claro Modem and FSG. What FSG and modem did you flash to get 4G to work?
Now that i can get into the network I am going to test lot of thing to see what is going on...
Thanks again, meu amigo zilian!
Click to expand...
Click to collapse
Man, I flashed Stock 4.0.4 Retail, fully. I didn´t mix modem or FSG files. It´s totally stock. Our phones are supposed to detect the Lte automatically and without any configuration, since the SIMcard download all the config needed when the phone starts. (At least that happens to mine.)
Regards!
=p
As the title states.
If you dont want to break LTE with band 4 (1700/2100) AWS band dont update to ZV9.
@randrew87 and myself tested the root on zv9 and tried to activate band 4 and it gives an error.
Network states as "LG" in /SETTINGS/ABOUT/NETWORK.
It would seem like data works but no calls.
Can anyone else confirm this behavior?
Alex_XV6700 said:
As the title states.
If you dont want to break LTE with band 4 (1700/2100) AWS band dont update to ZV9.
@randrew87 and myself tested the root on zv9 and tried to activate band 4 and it gives an error.
Network states as "LG" in /SETTINGS/ABOUT/NETWORK.
It would seem like data works but no calls.
Can anyone else confirm this behavior?
Click to expand...
Click to collapse
take a look here
randrew87 said:
take a look here
Click to expand...
Click to collapse
Already checked that out I will try in a bit bro!
Thanks for the prompt possible fix!
Alex_XV6700 said:
As the title states.
If you dont want to break LTE with band 4 (1700/2100) AWS band dont update to ZV9.
@randrew87 and myself tested the root on zv9 and tried to activate band 4 and it gives an error.
Network states as "LG" in /SETTINGS/ABOUT/NETWORK.
It would seem like data works but no calls.
Can anyone else confirm this behavior?
Click to expand...
Click to collapse
I just got the phone a few days ago and it did grab this update Tuesday Dec 1 2015. My phone is unrooted (for now) and zv9 works fine other than the display brightness sucks now and the battery goes down faster.
Is this for the Sprint model??
Sent from my LG-H950 using Tapatalk
Yes sir
I have the AT&T version running the 5.1.1 PR ROM. Is there a similar way to enable band 12 on that, which otherwise fails?
sdaddy said:
I have the AT&T version running the 5.1.1 PR ROM. Is there a similar way to enable band 12 on that, which otherwise fails?
Click to expand...
Click to collapse
It seems that H950 model does not include that band 12.
Only sprint model has it. :fingers-crossed:
There is a working way for 4G LTE on T-Mobile via Band 4 with ZV9 update now! - http://forum.xda-developers.com/g-flex2/help/sprint-lg-g-flex-2-zv9-root-update-t-t3269775
delete