Database Info

Bricked x10

Hi, first of all, i know there are lots of post about bricked phones, trust me, i've seen most of them but none of it helped me and i am kind of fraking out. I got a Sony x10 a few weeks ago and I loved it. I upgraded it to Andoird 2.3.3, rooted it, installed xRecovery, etc. But yesterday I tried to install Android ICS, for that I had to unlock bootloader. Read a lot of post and started, and finally used a method which uses kernel downgrade, a batch program and the kernel upgrade, but guess what, it didn't work, couldn't flash kernel upgrade after all. What freaks me out is that I can't install any ftf either, flashtools keeps showing ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_DYNAMIC="SIN header verification failed". Tried using update service, tried with many ftf files and flashtools. Nothing happens. Phone just vibrates a little bit longer than normal when I turn it on and nothing else. It also turn the green led on when connecting to the charger and flash mode seems to work.
I am desperate, I had to do a lot to get a phone like this and now it doesn't even boot with the SE logo. Thanks and I hope someone has the solution.
I forgot to put this:
11/014/2013 14:14:36 - INFO - <- This level is successfully initialized
11/014/2013 14:14:37 - INFO - Flashtool Version 0.9.10.1 built on 2013-01-09 19:49:47
11/014/2013 14:14:37 - INFO - You can drag and drop ftf files here to start flashing them
11/014/2013 14:14:47 - INFO - Device disconnected
11/015/2013 14:15:19 - INFO - Selected X10_V1_BLRelock.ftf
11/015/2013 14:15:19 - INFO - Preparing files for flashing
11/015/2013 14:15:19 - INFO - Please connect your device into flashmode.
11/015/2013 14:15:26 - INFO - Flash canceled
11/015/2013 14:15:34 - INFO - Selected x10_2.3_aro.ftf
11/015/2013 14:15:34 - INFO - Preparing files for flashing
11/015/2013 14:15:51 - INFO - Please connect your device into flashmode.
11/016/2013 14:16:32 - INFO - Device connected in flash mode
11/016/2013 14:16:32 - INFO - Opening device for R/W
11/016/2013 14:16:33 - INFO - Reading device information
11/016/2013 14:16:33 - INFO - Phone ready for flashmode operations.
11/016/2013 14:16:33 - INFO - Current device : X10i - CB511LGRA4 - 1241-1846_R1C - 1227-4612_2.1.A.0.435 - WORLD-1-4-8_3.0.1.G.0.75
11/016/2013 14:16:33 - INFO - Start Flashing
11/016/2013 14:16:33 - INFO - Processing loader
11/016/2013 14:16:34 - INFO - Using an unofficial loader
11/016/2013 14:16:34 - INFO - Checking header
11/016/2013 14:16:34 - INFO - Ending flash session
11/016/2013 14:16:34 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_DYNAMIC="SIN header verification failed"
11/016/2013 14:16:34 - ERROR - Error flashing. Aborted
11/016/2013 14:16:34 - INFO - Device connected in flash mode
11/016/2013 14:16:36 - INFO - Device disconnected
11/016/2013 14:16:38 - INFO - Device connected in flash mode
complete log, saved when trying to flash stock 2.3.3 firmware

That one should be easy to solve When you choose an ftf file to flash in firmware selection window you have to check "No final verification". That worked for me
P.S. also try to post your threads in the right section

brick
u must try another flash tool the older version

U read a lots, but why didnt u unlock using flashtool plugins? It's easier.
Sent from my Xperia X10 using xda app-developers app

(Xperia J) Can't flash in flash mode

Hello, first of all sorry for my english.
Yesterday I flashed my Xperia J with FXP223, everything was ok except that I have no network, and my IMEI was gone.
I've found that I have to flash my phone with an ICS stock rom and reflash with FXP223.
But i can't flash my phone in flash mode.
I followed all instructions, Flashtool -> flash mode -> select .ftf rom -> plug my phone in flash mode when asked, green led is OK -> and then the flash freeze at "Flashing data" and at the same time my green led shutdown.
Code:
16/012/2013 09:12:36 - INFO - <- This level is successfully initialized
16/012/2013 09:12:36 - INFO - Flashtool Version 0.9.11.0 built on 2013-06-04 22:50:00
16/012/2013 09:12:40 - INFO - Device disconnected
16/012/2013 09:12:42 - INFO - Selected ST26i / 11.0.A.7.5 / CE
16/012/2013 09:12:42 - INFO - Preparing files for flashing
16/012/2013 09:12:51 - INFO - Please connect your device into flashmode.
16/013/2013 09:13:02 - INFO - Device connected in flash mode
16/013/2013 09:13:05 - INFO - Opening device for R/W
16/013/2013 09:13:05 - INFO - Reading device information
16/013/2013 09:13:06 - INFO - Phone ready for flashmode operations.
16/013/2013 09:13:06 - INFO - Current device : Unknown: Nov 12 2012/22:55:05 - YT9002JQBJ - Unknown: Nov 12 2012/22:55:05 - Unknown: Nov 12 2012/22:55:05 - Unknown: Nov 12 2012/22:55:05
16/013/2013 09:13:06 - INFO - Start Flashing
16/013/2013 09:13:06 - INFO - Processing loader
16/013/2013 09:13:06 - INFO - Checking header
16/013/2013 09:13:06 - INFO - Flashing data
I have tested with multiple .ftf rom, 2 versions of Flashtool, on 3 PC, usb debugging is checked, and all the time it freeze at "Flashing data" and my green led shutdown.
I hope that someone can help me, I can't use my phone :'(
Thank you in advance.
Edit: Fastboot mode works fine, only flashmode doesn't works.

NoGynGz said:
Hello, first of all sorry for my english.
Yesterday I flashed my Xperia J with FXP223, everything was ok except that I have no network, and my IMEI was gone.
I've found that I have to flash my phone with an ICS stock rom and reflash with FXP223.
But i can't flash my phone in flash mode.
I followed all instructions, Flashtool -> flash mode -> select .ftf rom -> plug my phone in flash mode when asked, green led is OK -> and then the flash freeze at "Flashing data" and at the same time my green led shutdown.
Code:
16/012/2013 09:12:36 - INFO - <- This level is successfully initialized
16/012/2013 09:12:36 - INFO - Flashtool Version 0.9.11.0 built on 2013-06-04 22:50:00
16/012/2013 09:12:40 - INFO - Device disconnected
16/012/2013 09:12:42 - INFO - Selected ST26i / 11.0.A.7.5 / CE
16/012/2013 09:12:42 - INFO - Preparing files for flashing
16/012/2013 09:12:51 - INFO - Please connect your device into flashmode.
16/013/2013 09:13:02 - INFO - Device connected in flash mode
16/013/2013 09:13:05 - INFO - Opening device for R/W
16/013/2013 09:13:05 - INFO - Reading device information
16/013/2013 09:13:06 - INFO - Phone ready for flashmode operations.
16/013/2013 09:13:06 - INFO - Current device : Unknown: Nov 12 2012/22:55:05 - YT9002JQBJ - Unknown: Nov 12 2012/22:55:05 - Unknown: Nov 12 2012/22:55:05 - Unknown: Nov 12 2012/22:55:05
16/013/2013 09:13:06 - INFO - Start Flashing
16/013/2013 09:13:06 - INFO - Processing loader
16/013/2013 09:13:06 - INFO - Checking header
16/013/2013 09:13:06 - INFO - Flashing data
I have tested with multiple .ftf rom, 2 versions of Flashtool, on 3 PC, usb debugging is checked, and all the time it freeze at "Flashing data" and my green led shutdown.
I hope that someone can help me, I can't use my phone :'(
Thank you in advance.
Edit: Fastboot mode works fine, only flashmode doesn't works.
Click to expand...
Click to collapse
Did you install the drivers from the flashtool folder? If not that may very well be your problem.

gamer649 said:
Did you install the drivers from the flashtool folder? If not that may very well be your problem.
Click to expand...
Click to collapse
Flashtool-drivers.exe doesn't have drivers for Xperia J, I've tested to manually import J drivers with that method : http://forum.xda-developers.com/showpost.php?p=41592930&postcount=15 but doesn't work too.
Sony companion recognize my phone (when I test to recover my phone it says that my phone has been modified, but it recognize the phone)
I don't know what to do

NoGynGz said:
Flashtool-drivers.exe doesn't have drivers for Xperia J, I've tested to manually import J drivers with that method : http://forum.xda-developers.com/showpost.php?p=41592930&postcount=15 but doesn't work too.
Sony companion recognize my phone (when I test to recover my phone it says that my phone has been modified, but it recognize the phone)
I don't know what to do
Click to expand...
Click to collapse
Did you install the fastboot and flashmode drives from the setup as you may need them too. I think it would be worth it to install all of the drivers from the driver setup folder. If you try that and then that method after I think it should work.

OMFG
After hours and hours of research and test, it finally works !!! (on the 4th PC )
Certainly drivers conflict or something like that.
If someone have the same problem :
Install only Flashtool v0.9.10.1
Install flashmode drivers with Flashtool-drivers.exe
Launch it.
Import ST26 drivers in flashtool (search ST26.zip on google)
Connect the Xperia J in flashmode to automatically install the windows drivers.
When complete disconnect the Xperia J.
In Flashtool -> flashmode -> select a stock .ftf rom -> flash -> connect the xperia in flashmode when asked. Yeah it flash.
I insist that on this PC, I have never installed SEUS, PC companion or others software or drivers.
(For those who want, I flashed with an ICS stock rom then FXP218, now all works)
Thank you gamer649 for trying to help me

NoGynGz said:
OMFG
After hours and hours of research and test, it finally works !!! (on the 4th PC )
Certainly drivers conflict or something like that.
If someone have the same problem :
Install only Flashtool v0.9.10.1
Install flashmode drivers with Flashtool-drivers.exe
Launch it.
Import ST26 drivers in flashtool (search ST26.zip on google)
Connect the Xperia J in flashmode to automatically install the windows drivers.
When complete disconnect the Xperia J.
In Flashtool -> flashmode -> select a stock .ftf rom -> flash -> connect the xperia in flashmode when asked. Yeah it flash.
I insist that on this PC, I have never installed SEUS, PC companion or others software or drivers.
(For those who want, I flashed with an ICS stock rom then FXP218, now all works)
Click to expand...
Click to collapse
It is good to hear you got it working. I've just noticed you previously said you tried to repair your phone in PC companion. That would have stopped it working too. I'm sorry I didn't pick that up sooner.

tried all of that but no luck when i press on the thunder icon it says wait for flash
NoGynGz said:
OMFG
After hours and hours of research and test, it finally works !!! (on the 4th PC )
Certainly drivers conflict or something like that.
If someone have the same problem :
Install only Flashtool v0.9.10.1
Install flashmode drivers with Flashtool-drivers.exe
Launch it.
Import ST26 drivers in flashtool (search ST26.zip on google)
Connect the Xperia J in flashmode to automatically install the windows drivers.
When complete disconnect the Xperia J.
In Flashtool -> flashmode -> select a stock .ftf rom -> flash -> connect the xperia in flashmode when asked. Yeah it flash.
I insist that on this PC, I have never installed SEUS, PC companion or others software or drivers.
(For those who want, I flashed with an ICS stock rom then FXP218, now all works)
Thank you gamer649 for trying to help me
Click to expand...
Click to collapse
tried all of that but no luck when i press on the thunder icon it says wait for flashmode but nothing happens

Boro2 said:
tried all of that but no luck when i press on the thunder icon it says wait for flashmode but nothing happens
Click to expand...
Click to collapse
try another boot.img first in fastboot mode and then try.

Thanks
tuspam said:
try another boot.img first in fastboot mode and then try.
Click to expand...
Click to collapse
Thanks bro it worked

No Luck
I have tried every thing in this thread but nothing works for me.
Plz Help I am on stock firmware .33.
Does not goes any further from this.
Please Help.
04/010/2014 12:10:38 - INFO - Selected ST26i / 11.2.A.0.21 / No brand ITA
04/010/2014 12:10:39 - INFO - Preparing files for flashing
04/011/2014 12:11:36 - INFO - Please connect your device into flashmode.
04/011/2014 12:11:44 - INFO - Device connected in flash mode
04/011/2014 12:11:45 - INFO - Opening device for R/W
04/011/2014 12:11:45 - INFO - Reading device information
04/011/2014 12:11:45 - INFO - Phone ready for flashmode operations.
04/011/2014 12:11:45 - INFO - Current device : ST26i - YT9102JUSP - 1271-1970_R5E - 1263-8752_11.2.A.0.33 - WORLD-i_11.2.A.0.33
04/011/2014 12:11:45 - INFO - Start Flashing
04/011/2014 12:11:45 - INFO - Processing loader.sin
04/011/2014 12:11:45 - INFO - Checking header
04/011/2014 12:11:46 - INFO - Flashing data
ALL DONE BY REMOVING MMC AND FLASHING

please help
I also had the same problem but then i managed to flash a stock ics .ftf and now the device is not responding...! NO ligths even after charging my phone is still connected to charger...! someone please help please ...!

anaseansari said:
I have tried every thing in this thread but nothing works for me.
Plz Help I am on stock firmware .33.
Does not goes any further from this.
Please Help.
04/010/2014 12:10:38 - INFO - Selected ST26i / 11.2.A.0.21 / No brand ITA
04/010/2014 12:10:39 - INFO - Preparing files for flashing
04/011/2014 12:11:36 - INFO - Please connect your device into flashmode.
04/011/2014 12:11:44 - INFO - Device connected in flash mode
04/011/2014 12:11:45 - INFO - Opening device for R/W
04/011/2014 12:11:45 - INFO - Reading device information
04/011/2014 12:11:45 - INFO - Phone ready for flashmode operations.
04/011/2014 12:11:45 - INFO - Current device : ST26i - YT9102JUSP - 1271-1970_R5E - 1263-8752_11.2.A.0.33 - WORLD-i_11.2.A.0.33
04/011/2014 12:11:45 - INFO - Start Flashing
04/011/2014 12:11:45 - INFO - Processing loader.sin
04/011/2014 12:11:45 - INFO - Checking header
04/011/2014 12:11:46 - INFO - Flashing data
ALL DONE BY REMOVING MMC AND FLASHING
Click to expand...
Click to collapse
Remove SIM Card, MMC & then flash! Also, note that sometimes flashing doesn't work after you resume from Standby/Hibernate mode in PC.

anaseansari said:
I have tried every thing in this thread but nothing works for me.
Plz Help I am on stock firmware .33.
Does not goes any further from this.
Please Help.
04/010/2014 12:10:38 - INFO - Selected ST26i / 11.2.A.0.21 / No brand ITA
04/010/2014 12:10:39 - INFO - Preparing files for flashing
04/011/2014 12:11:36 - INFO - Please connect your device into flashmode.
04/011/2014 12:11:44 - INFO - Device connected in flash mode
04/011/2014 12:11:45 - INFO - Opening device for R/W
04/011/2014 12:11:45 - INFO - Reading device information
04/011/2014 12:11:45 - INFO - Phone ready for flashmode operations.
04/011/2014 12:11:45 - INFO - Current device : ST26i - YT9102JUSP - 1271-1970_R5E - 1263-8752_11.2.A.0.33 - WORLD-i_11.2.A.0.33
04/011/2014 12:11:45 - INFO - Start Flashing
04/011/2014 12:11:45 - INFO - Processing loader.sin
04/011/2014 12:11:45 - INFO - Checking header
04/011/2014 12:11:46 - INFO - Flashing data
ALL DONE BY REMOVING MMC AND FLASHING
Click to expand...
Click to collapse
restore your backup files then flash again ,it's work fine

[Q] [J] Bricked phone. Please help. Desperate.

I installed FXP CM10 earlier on my phone, then was unable to flash any stock FTFs. Below was the response from the flash tool.
25/009/2013 21:09:02 - INFO - Device connected in flash mode
25/012/2013 21:12:59 - INFO - Selected XJ_ST26i / 11.2.A.0.31 / CE
25/012/2013 21:12:59 - INFO - Preparing files for flashing
25/013/2013 21:13:58 - INFO - Please connect your device into flashmode.
25/013/2013 21:13:59 - INFO - Opening device for R/W
25/013/2013 21:13:59 - INFO - Start Flashing
25/013/2013 21:13:59 - INFO - Processing loader.sin
25/013/2013 21:13:59 - INFO - Checking header
25/013/2013 21:13:59 - INFO - Ending flash session
25/013/2013 21:13:59 - ERROR -
25/013/2013 21:13:59 - ERROR - Error flashing. Aborted
25/013/2013 21:13:59 - INFO - Device connected in flash mode.
Then I thought I could use the stock based roms and installed Dark Moon AVD Rom 4.1.2 using the CWM recovery. The instructions included the flashing of the kernel which again I was not able to do, the flashtool responded the same way. Now I don't know what to do with my phone. Please help. When I charge my phone now and press the power button once I can see the battery logo but when I try to turn on, the orange led blinks once and then nothing happens. Thanks in advance.

mantisy said:
I installed FXP CM10 earlier on my phone, then was unable to flash any stock FTFs. Below was the response from the flash tool.
25/009/2013 21:09:02 - INFO - Device connected in flash mode
25/012/2013 21:12:59 - INFO - Selected XJ_ST26i / 11.2.A.0.31 / CE
25/012/2013 21:12:59 - INFO - Preparing files for flashing
25/013/2013 21:13:58 - INFO - Please connect your device into flashmode.
25/013/2013 21:13:59 - INFO - Opening device for R/W
25/013/2013 21:13:59 - INFO - Start Flashing
25/013/2013 21:13:59 - INFO - Processing loader.sin
25/013/2013 21:13:59 - INFO - Checking header
25/013/2013 21:13:59 - INFO - Ending flash session
25/013/2013 21:13:59 - ERROR -
25/013/2013 21:13:59 - ERROR - Error flashing. Aborted
25/013/2013 21:13:59 - INFO - Device connected in flash mode.
Then I thought I could use the stock based roms and installed Dark Moon AVD Rom 4.1.2 using the CWM recovery. The instructions included the flashing of the kernel which again I was not able to do, the flashtool responded the same way. Now I don't know what to do with my phone. Please help. When I charge my phone now and press the power button once I can see the battery logo but when I try to turn on, the orange led blinks once and then nothing happens. Thanks in advance.
Click to expand...
Click to collapse
Download and install program Sony Update Service (SEUS in ancient times) and use it to repair you phone

[J] Bricked phone trying to install this. Please help.
lozohcum said:
Download and install program Sony Update Service (SEUS in ancient times) and use it to repair you phone
Click to expand...
Click to collapse
'Your phone contains modified software which cannot be updated.'
This is what it said.

mantisy said:
'Your phone contains modified software which cannot be updated.'
This is what it said.
Click to expand...
Click to collapse
Use EMMA
http://developer.sonymobile.com/services/flash-tool/how-to-download-and-install-the-flash-tool/

mantisy said:
'Your phone contains modified software which cannot be updated.'
This is what it said.
Click to expand...
Click to collapse
You have unlockbootloader, relock with flahtool and Sony Update Service (SEUS) should work. i try that on Tipo but it should work on J also.

Ok im gonna try expain you
Pull the battey
and connect to pc without the battery, put again the battey on the phone, and push the button (volume - key) until the process is over

[J] Bricked phone trying to install this. Please help.
realthrash said:
Ok im gonna try expain you
Pull the battey
and connect to pc without the battery, put again the battey on the phone, and push the button (volume - key) until the process is over
Click to expand...
Click to collapse
26/011/2013 12:11:14 - INFO - <- This level is successfully initialized
26/011/2013 12:11:14 - INFO - Flashtool Version 0.9.13.0 built on 2013-06-04 22:50:00
26/011/2013 12:11:18 - INFO - Device connected in flash mode
26/011/2013 12:11:25 - INFO - Selected XJ_ST26i / 11.2.A.0.31 / CE
26/011/2013 12:11:25 - INFO - Preparing files for flashing
26/011/2013 12:11:46 - INFO - Please connect your device into flashmode.
26/011/2013 12:11:47 - INFO - Opening device for R/W
26/011/2013 12:11:47 - INFO - Start Flashing
26/011/2013 12:11:47 - INFO - Processing loader.sin
26/011/2013 12:11:47 - INFO - Checking header
26/011/2013 12:11:47 - INFO - Ending flash session
26/011/2013 12:11:47 - ERROR -
26/011/2013 12:11:47 - ERROR - Error flashing. Aborted
26/011/2013 12:11:47 - INFO - Device connected in flash mode
That is the response.

Try use another flashtool
Sent from my Xperia J using xda premium

mantisy said:
26/011/2013 12:11:47 - INFO - Checking header
26/011/2013 12:11:47 - INFO - Ending flash session
26/011/2013 12:11:47 - ERROR -
26/011/2013 12:11:47 - ERROR - Error flashing. Aborted
26/011/2013 12:11:47 - INFO - Device connected in flash mode
Click to expand...
Click to collapse
Hello.
It looks like some drivers are missing.
Download and install Sony driver package to your computer and then try and report.
Xperia Driver Package
Regards.

Sony Update Service will fix phone even with unlocked bootloader but you need stock rom installed to fix, i forgot

Xperia Miro Freeze when booting

Hi so just yesterday rooted my phone and installed CWM, tried flashing a new rom but I rebooted my phone after deleting the system partition and before installing a new room. Now its stuck on the SONY logo screen, tried using Flashtool to flash the stock rom it gives me this everytime
05/034/2013 16:34:08 - INFO - Device connected in flash mode
05/034/2013 16:34:11 - INFO - Selected ST23i / 11.0.A.2.10 / CentralEurope
05/034/2013 16:34:11 - INFO - Preparing files for flashing
05/034/2013 16:34:41 - INFO - Please connect your device into flashmode.
05/034/2013 16:34:42 - INFO - Opening device for R/W
05/034/2013 16:34:42 - INFO - Start Flashing
05/034/2013 16:34:42 - INFO - Processing loader.sin
05/034/2013 16:34:42 - INFO - Checking header
05/034/2013 16:34:42 - INFO - Ending flash session
05/034/2013 16:34:42 - ERROR -
05/034/2013 16:34:42 - ERROR - Error flashing. Aborted
05/034/2013 16:34:42 - INFO - Device connected in flash mode
Tried using Sony PC Companion it doesnt detects my phone, same with Update Service.
Am I doing something wrong or missing something?
EDIT: Please lock the topic as I found the problem and now sucessfully unbricked it, Windows 8 wasnt letting me do anything

[SOLVED]Error Flashing in Flashtool [Xperia J]

Hi I flashed P.A 3 for Xperia J.
When I open the build.prop it says its for Xperia Tipo but it booted.
Now when Im connecting my Phone in PC it is detected as Xperia Tipo and I can't flash stock ftf files.
And also I have bugs in Network it can't detect network.
Here are the logs.
Code:
24/039/2014 13:39:34 - INFO - Device connected in flash mode
24/039/2014 13:39:56 - INFO - Selected ST26i_11.2.А.0.33_Arabic_g0dsend313.ftf
24/039/2014 13:39:56 - INFO - Preparing files for flashing
24/040/2014 13:40:11 - INFO - Please connect your device into flashmode.
24/040/2014 13:40:12 - INFO - Opening device for R/W
24/040/2014 13:40:12 - INFO - Reading device information
24/040/2014 13:40:17 - INFO - Start Flashing
24/040/2014 13:40:17 - INFO - Processing loader
24/040/2014 13:40:17 - INFO - Checking header
24/040/2014 13:40:17 - INFO - Ending flash session
24/040/2014 13:40:17 - ERROR -
24/040/2014 13:40:17 - ERROR - Error flashing. Aborted
SOLVED​
The problem is I don't have enough space to my disk so flashtool can't copy temp files.
Lesson learned.
Always check ROM's build.prop before flashing.​

mariozawa said:
Hi I flashed P.A 3 for Xperia J.
When I open the build.prop it says its for Xperia Tipo but it booted.
Now when Im connecting my Phone in PC it is detected as Xperia Tipo and I can't flash stock ftf files.
And also I have bugs in Network it can't detect network.
Here are the logs.
Code:
24/039/2014 13:39:34 - INFO - Device connected in flash mode
24/039/2014 13:39:56 - INFO - Selected ST26i_11.2.А.0.33_Arabic_g0dsend313.ftf
24/039/2014 13:39:56 - INFO - Preparing files for flashing
24/040/2014 13:40:11 - INFO - Please connect your device into flashmode.
24/040/2014 13:40:12 - INFO - Opening device for R/W
24/040/2014 13:40:12 - INFO - Reading device information
24/040/2014 13:40:17 - INFO - Start Flashing
24/040/2014 13:40:17 - INFO - Processing loader
24/040/2014 13:40:17 - INFO - Checking header
24/040/2014 13:40:17 - INFO - Ending flash session
24/040/2014 13:40:17 - ERROR -
24/040/2014 13:40:17 - ERROR - Error flashing. Aborted
Click to expand...
Click to collapse
need to flash ICS & then flash CM based roms for network issue.
use http://www.sonymobile.com/gb/tools/update-service/ for flash stock JB

Suxter said:
need to flash ICS & then flash CM based roms for network issue.
use http://www.sonymobile.com/gb/tools/update-service/ for flash stock JB
Click to expand...
Click to collapse
Thanks bro. It is also applicable if my phone is already in JB when I buy it?

mariozawa said:
Thanks bro. It is also applicable if my phone is already in JB when I buy it?
Click to expand...
Click to collapse
YES
CM base roms have baseband issue, ICS flash fix that

Suxter said:
YES
CM base roms have baseband issue, ICS flash fix that
Click to expand...
Click to collapse
Thanks bro now its clear to me