Related
People exist windows linux for qteks200?
No exist right?
seriously... Windows linux you say? That I'd like to see. Linux linux would be a start...
IMO the life cycle of these devices is to short for it to be worthwhile developing ground-up OS's, but I know very little about this. Obviously there are WM device-linux projects about, but although the prophet's a nice device, due to it's limitations (cpu etc) I don't imagine too many devs with an interest in linux are flocking to develop for it. I'd be happy to be corrected, though...
To s200 i don´t find anything :S but look here: http://www.youtube.com/watch?v=CUy_mUsGjRU
looks great but is only to blue angel...
http://opie.handhelds.org/cgi-bin/moin.cgi/ i think it's a matter of time!
Yeah !!!
I search very for it, and i get it a few. I known that PDA Wizard have OMAP processor too, so I think that it's possible to run this in ower s200.
Download haret and copy in your PDA in /STORAGE/PROGRAM FILES/HARET/ run haret_omap.exe in you Windows Mobile and it's run GNU/Linux
In you computer (GNU/Linux) run
#ifconfig usb0 up 10.226.6.1 netmask 255.255.0.0
#telnet 10.226.6.6
have fun !! Welcome to GNU/Linux in you S200:
Code:
/ # cat /proc/cpuinfo
Processor : ARM926EJ-Sid(wb) rev 3 (v5l)
BogoMIPS : 89.70
Features : swp half thumb fastmult edsp java
CPU implementer : 0x41
CPU architecture: 5TEJ
CPU variant : 0x0
CPU part : 0x926
CPU revision : 3
Cache type : write-back
Cache clean : cp15 c7 ops
Cache lockdown : format C
Cache format : Harvard
I size : 16384
I assoc : 4
I line length : 32
I sets : 128
D size : 8192
D assoc : 4
D line length : 32
D sets : 64
Hardware : HTC Wizard
Revision : 0000
Serial : 0000000000000000
Code:
/ # dmesg
Linux version 2.6.16.27-omap1 ([email protected]) (gcc version 3.3.2) #1 PREEMPT Thu Nov 9 18:52:05 CET 2006
CPU: ARM926EJ-Sid(wb) [41069263] revision 3 (ARMv5TEJ)
Machine: HTC Wizard
Memory policy: ECC disabled, Data cache writeback
On node 0 totalpages: 24576
DMA zone: 24576 pages, LIFO batch:7
DMA32 zone: 0 pages, LIFO batch:0
Normal zone: 0 pages, LIFO batch:0
HighMem zone: 0 pages, LIFO batch:0
Unknown OMAP cpu type: 0x00
OMAP0000 revision 1 handled as 00xx id: 0000000000000000
SRAM: Mapped pa 0x20000000 to va 0xd0000000 size: 0x32000
htc_wizard_map_io done.
CPU0: D VIVT write-back cache
CPU0: I cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
CPU0: D cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets
Built 1 zonelists
Kernel command line: root=/dev/ram0 init=/linuxrc
htc_wizard_init_irq.
Clocks: ARM_SYSST: 0x1040 DPLL_CTL: 0x2793 ARM_CKCTL: 0x6506
Clocking rate (xtal/DPLL1/MPU): 13.0/195.0/195.0 MHz
Total of 96 interrupts in 3 interrupt banks
OMAP730 GPIO hardware
PID hash table entries: 512 (order: 9, 8192 bytes)
Console: colour dummy device 80x30
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 96MB = 96MB total
Memory: 94592KB available (1684K code, 418K data, 92K init)
Calibrating delay loop... 89.70 BogoMIPS (lpj=448512)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 428K
NET: Registered protocol family 16
Tornado init.
OMAP730 Watchdog seems to be activated, disabling it for now.
trying to enable USB.
USB_EN to 0 after 0 tries.
MMC host reset done: remaining tries: 100
OMAP DMA hardware version 1
DMA capabilities: 000c0000:00000000:01ff:003f:007f
Initializing OMAP McBSP system
mcbsp: could not acquire dsp_ck handle.
omapdsp: unsupported omap architecture.
USB: hmc 4, usb0 2 wires (dev)
NetWinder Floating Point Emulator V0.97 (double precision)
io scheduler noop registered
io scheduler deadline registered (default)
HTC Tornado Backlight driver.
VSFB Frame buffer driver for HTC OMAP Based Phones.
vsfb: framebuffer at 0x20001020, mapped to 0xc6800020, size 150k
Console: switching to colour frame buffer device 40x29
TI OMAP Watchdog Timer for OMAP730
RAMDISK driver initialized: 1 RAM disks of 4096K size 1024 blocksize
udc: OMAP UDC driver, version: 4 October 2004 (iso)
udc: OMAP UDC rev 3.6
udc: hmc mode 4, integrated transceiver
udc: fifo mode 3, 648 bytes not used
usb0: Ethernet Gadget, version: May Day 2005
usb0: using omap_udc, OUT ep2out-bulk IN ep1in-bulk STATUS ep3in-int
usb0: MAC ba:aa:57:c0:db:99
usb0: HOST MAC 0a:bb:b8:f9:5e:53
mice: PS/2 mouse device common for all mice
OMAP Keypad Driver
omap_kp_probe.
input: omap-keypad as /class/input/input0
NET: Registered protocol family 2
MMC1: Command timeout, CMD0
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 2, 16384 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
udc: USB reset done, gadget ether
RAMDISK: Compressed image found at block 0
udc: USB reset done, gadget ether
udc: USB reset done, gadget ether
udc: USB reset done, gadget ether
udc: USB reset done, gadget ether
udc: USB reset done, gadget ether
udc: USB reset done, gadget ether
VFS: Mounted root (ext2 filesystem).
Freeing init memory: 92K
usb0: full speed config #1: 100 mA, Ethernet Gadget, using CDC Ethernet
More .......
With this kernel you have ssh whith dropbear, and nano-X, this is for project LinWizard and run very well in the s200.
ssh -l root 10.226.6.6
Password: root
I think that this is the start point to owner project, then we can compile with opie as in Universal.
Thempra said:
I think that this is the start point to owner project, then we can compile with opie as in Universal.
Click to expand...
Click to collapse
opie needs only minor customizations to run on another device.
IMHO it's more important to make SD and the touchscreen run.
Can you dump the TS and SDHC dlls from the device ?
cr2 said:
Can you dump the TS and SDHC dlls from the device ?
Click to expand...
Click to collapse
No, I can't access to SD memory or I don't know do it. I try to mount /dev/mmc.... by say that it is not here.
I will try to compile de kernel with SD and MMC options ...
Thempra said:
No, I can't access to SD memory or I don't know do it.
Click to expand...
Click to collapse
I meant the wince .dlls. We have already tried it, and it didn't not work
to get them in this way.
I will try to compile de kernel with SD and MMC options ...
Click to expand...
Click to collapse
Look in your logfile, you already have them. And the MMC/SD init command times out
Code:
MMC1: Command timeout, CMD0
Hallo to all... I want to ask a really simple question... I putted linux "HARET" in my s200... it start but... how to have keyboard on screen? Thank all...
sub078 said:
Hallo to all... I want to ask a really simple question... I putted linux "HARET" in my s200... it start but... how to have keyboard on screen? Thank all...
Click to expand...
Click to collapse
You need connect your s200 in USB port and since your computer run
#ifconfig usb0 up 10.226.6.1 netmask 255.255.0.0
#ssh -l root 10.226.6.6
Password: root
So... I need a computer with running linux? I don't have linux on my pc... There is a solution? thanks for answer....
sub078 said:
So... I need a computer with running linux? I don't have linux on my pc... There is a solution? thanks for answer....
Click to expand...
Click to collapse
I dont't try it in windows, but I suppose that you have to run GNU/Linux in the s200 connected to the USB, Windows detected it as network interface and you configure it with IP 10.226.6.1 and netmask 255.255.0.0.
Then with putty conect to ssh at [email protected] with password root.
Thank you... I will try... but... It's possible to install OPIE linux on s200? If yes... where i can find installation guide? My english is not good and I have some problem with the TECNICAL linux guides! Thank all for comprension!
cr2 said:
Look in your logfile, you already have them. And the MMC/SD init command times out
Code:
MMC1: Command timeout, CMD0
Click to expand...
Click to collapse
Ok, i've checked with the wince dlls, the MMC/SD driver is ok.
What you are missing now is the card power gpio, card detect gpio and the irq.
Take the latest haret from http://handhelds.org/~koconnor/haret
read the docs and trace gpio usage.
To know other gpios would be useful too.
This is the output of DUMP GPIO:
HaRET(8)# DUMP GPIO
GPIO# D S A INTER | GPIO# D S A INTER | GPIO# D S A INTER | GPIO# D S A INTER
------------------+-------------------+-------------------+------------------
0 I 1 0 | 21 I 0 0 | 42 O 0 0 | 63 I 0 0
1 I 0 0 | 22 I 0 0 | 43 O 0 0 | 64 I 0 2
2 I 1 0 | 23 I 0 0 | 44 I 0 0 | 65 I 0 2
3 I 0 0 | 24 I 0 0 | 45 I 0 0 | 66 I 0 3
4 I 0 0 | 25 I 0 0 | 46 I 0 0 | 67 I 0 2
5 I 0 0 | 26 I 0 0 | 47 O 0 0 | 68 I 0 0
6 I 0 0 | 27 I 0 0 | 48 I 0 2 | 69 I 0 3
7 I 0 0 | 28 I 0 0 | 49 O 0 2 | 70 I 0 0
8 I 0 0 | 29 I 0 0 | 50 I 0 3 | 71 I 0 2
9 I 0 0 | 30 I 0 0 | 51 O 0 2 | 72 I 0 2
10 I 0 0 | 31 I 0 0 | 52 O 0 0 | 73 I 0 2
11 I 0 0 | 32 I 0 0 FE | 53 O 0 3 | 74 I 0 3
12 I 0 0 | 33 O 0 0 | 54 I 0 0 | 75 I 0 2
13 I 0 0 | 34 I 0 0 FE | 55 O 0 2 | 76 I 0 3
14 I 0 0 | 35 O 0 0 | 56 O 0 2 | 77 I 0 0
15 I 0 0 | 36 O 0 0 | 57 O 0 2 | 78 I 0 3
16 I 0 3 | 37 O 0 0 | 58 I 0 3 | 79 I 0 0
17 I 0 3 | 38 I 0 0 | 59 I 0 2 | 80 I 0 2
18 I 0 3 | 39 O 0 0 | 60 O 0 3 | 81 I 0 2
19 I 0 1 | 40 I 0 0 | 61 O 0 0 | 82 I 0 3
20 I 0 0 | 41 I 0 0 | 62 I 0 3 | 83 I 0 2
Thempra said:
This is the output of DUMP GPIO:
Click to expand...
Click to collapse
This command works only on the Intel PXA CPU.
cr2 said:
This command works only on the Intel PXA CPU.
Click to expand...
Click to collapse
I read, read, read, ..... but..... What is the problem to detect de MMC?? haret or the kernel???
The new version of haret can't run it in s200, do you have the configuration in default.txt file to run it??
could somebody please post instructions for prophet?
Thanks!
Thempra said:
The new version of haret can't run it in s200
Click to expand...
Click to collapse
Try the prophet version from
http://jornada820.sourceforge.net/files/haret
i did not understand what am i supposed to do with harret_prophet.exe
I've recently gotten into the base android system of my treadmill's tablet. I haven't installed gapps yet, but Z4 root works for permanent root on this device. I wanted to report some info and ask where do I go from here. I want to know if this thing even has a recovery. Attempting to reboot into it results in a normal boot. What device does it resemble? What more info is needed on this device to go forward etc for gapps maybe custom roms.... idk....
Anyway, my info so far:
Code:
cat /proc/cpuinfo
Processor : ARMv7 Processor rev 2 (v7l)
BogoMIPS : 996.00
Features : swp half thumb fastmult vfp edsp neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x2
CPU part : 0xc08
CPU revision : 2
Hardware : SMDKV210
Revision : 0000
Serial : 0000000000000000
Code:
cat /proc/meminfo
MemTotal: 365156 kB
MemFree: 166184 kB
Buffers: 784 kB
Cached: 88360 kB
SwapCached: 0 kB
Active: 90716 kB
Inactive: 63524 kB
Active(anon): 65400 kB
Inactive(anon): 0 kB
Active(file): 25316 kB
Inactive(file): 63524 kB
Unevictable: 0 kB
Mlocked: 0 kB
SwapTotal: 0 kB
SwapFree: 0 kB
Dirty: 0 kB
Writeback: 0 kB
AnonPages: 65104 kB
Mapped: 57328 kB
Shmem: 304 kB
Slab: 9196 kB
SReclaimable: 3888 kB
SUnreclaim: 5308 kB
KernelStack: 2072 kB
PageTables: 7204 kB
NFS_Unstable: 0 kB
Bounce: 0 kB
WritebackTmp: 0 kB
CommitLimit: 182576 kB
Committed_AS: 3118016 kB
VmallocTotal: 303104 kB
VmallocUsed: 70312 kB
VmallocChunk: 196612 kB
Code:
uname -a
Linux localhost 2.6.32.9 #380 PREEMPT Thu Jun 9 11:35:11 CST 2011 armv7l GNU/Linux
jsteelm said:
I've recently gotten into the base android system of my treadmill's tablet. I haven't installed gapps yet, but Z4 root works for permanent root on this device. I wanted to report some info and ask where do I go from here. I want to know if this thing even has a recovery. Attempting to reboot into it results in a normal boot. What device does it resemble? What more info is needed on this device to go forward etc for gapps maybe custom roms.... idk....
Anyway, my info so far:
Code:
cat /proc/cpuinfo
Processor : ARMv7 Processor rev 2 (v7l)
BogoMIPS : 996.00
Features : swp half thumb fastmult vfp edsp neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x2
CPU part : 0xc08
CPU revision : 2
Hardware : SMDKV210
Revision : 0000
Serial : 0000000000000000
Code:
cat /proc/meminfo
MemTotal: 365156 kB
MemFree: 166184 kB
Buffers: 784 kB
Cached: 88360 kB
SwapCached: 0 kB
Active: 90716 kB
Inactive: 63524 kB
Active(anon): 65400 kB
Inactive(anon): 0 kB
Active(file): 25316 kB
Inactive(file): 63524 kB
Unevictable: 0 kB
Mlocked: 0 kB
SwapTotal: 0 kB
SwapFree: 0 kB
Dirty: 0 kB
Writeback: 0 kB
AnonPages: 65104 kB
Mapped: 57328 kB
Shmem: 304 kB
Slab: 9196 kB
SReclaimable: 3888 kB
SUnreclaim: 5308 kB
KernelStack: 2072 kB
PageTables: 7204 kB
NFS_Unstable: 0 kB
Bounce: 0 kB
WritebackTmp: 0 kB
CommitLimit: 182576 kB
Committed_AS: 3118016 kB
VmallocTotal: 303104 kB
VmallocUsed: 70312 kB
VmallocChunk: 196612 kB
Code:
uname -a
Linux localhost 2.6.32.9 #380 PREEMPT Thu Jun 9 11:35:11 CST 2011 armv7l GNU/Linux
Click to expand...
Click to collapse
I too was able to root my NordicTrack C1750 with 7" display using Z4 Root, I then installed Smart Taskbar 2 in order to easily access Apps, and Wireless ADB. I was also able to find a older copy of Pandora that would install and work:
mediafire bxtya2jor7zvd3e/Pandora.Radio.1.5.7.Android.apk (sorry, can't post links yet....)
hello i flash my drivice mtk6592 ( star n3+ ocracore ) with a same rom.
is not first time to i flash rom, but dhis new phone worked just a 30 min
after flash my touch screen dont work . and imei ( imei fix ok)
i try so send a lots rom , rom accept never found error . same my touch screen dont work.
and factory rom no success.
maybe i need to edit scatter file?
maybe my touch screen is bricked?
maybe my touch screen have hardware problem?
dhis is my test
Code:
============ Memory Detection Report ===========
Internal RAM:
Size = 0x00020000 (128KB)
External RAM:
Type = DRAM
Size = 0x40000000 (1024MB/8192Mb)
NAND Flash:
ERROR: NAND Flash was not detected!
EMMC:
EMMC_PART_BOOT1 Size = 0x0000000000200000(2MB)
EMMC_PART_BOOT2 Size = 0x0000000000200000(2MB)
EMMC_PART_RPMB Size = 0x0000000000020000(0MB)
EMMC_PART_GP1 Size = 0x0000000000000000(0MB)
EMMC_PART_GP2 Size = 0x0000000000000000(0MB)
EMMC_PART_GP3 Size = 0x0000000000000000(0MB)
EMMC_PART_GP4 Size = 0x0000000000000000(0MB)
EMMC_PART_USER Size = 0x00000003a3e00000(14910MB)
============ RAM Test ============
Data Bus Test:
[D0]
[D1]
[D2]
[D3]
[D4]
[D5]
[D6]
[D7]
[D8]
[D9]
[D10]
[D11]
[D12]
[D13]
[D14]
[D15]
[D16]
[D17]
[D18]
[D19]
[D20]
[D21]
[D22]
[D23]
[D24]
[D25]
[D26]
[D27]
[D28]
[D29]
[D30]
[D31]
OK!!
Address Bus Test:
[A1]
[A2]
[A3]
[A4]
[A5]
[A6]
[A7]
[A8]
[A9]
[A10]
[A11]
[A12]
[A13]
[A14]
[A15]
[A16]
[A17]
[A18]
[A19]
[A20]
[A21]
[A22]
[A23]
[A24]
[A25]
[A26]
[A27]
[A28]
[A29]
OK!!
RAM Pattern Test :
Writing ...
OK!!
Increment/Decrement Test:
Writing...
OK!!
============ NAND Test ============
SKIP! NAND Flash was not detected!
============ EMMC Test ============
OK!!
Code:
?????????adb?fastboot?????,??:
??adb??:adb devices
??shell:adb shell
??????:adb logcat
???????SD?:adb push D:\myfile.pdf /sdcard/
???SD?????:adb pull /sdcard/myfile.pdf D:\
??fastboot??:fastboot devices
??adb????:adb help
??fastboot????:fastboot help
C:\Program Files (x86)\Shuame>adb shell
[email protected]_v92_zlh_hd:/ $ cat /proc/devices
cat /proc/devices
Character devices:
1 mem
2 pty
3 ttyp
5 /dev/tty
5 /dev/console
5 /dev/ptmx
10 misc
13 input
14 sound
29 fb
90 mtd
108 ppp
116 alsa
128 ptm
136 pts
141 mtk_stp_usktrk
153 mtk_wmt_WIFI_chrdev
160 Vcodec
166 ttyACM
168 MJC
180 usb
182 sec
184 ccci0
184 CCCI_IPC_DEV0
184 ccci1_fs
184 vir_chr0
184 ccci_tty_drv0
188 M4U_device
189 usb_device
190 mtk_stp_wmt
191 mtk_stp_GPS_chrdev
192 mtk_stp_BT_chrdev
193 fm
196 devmap
204 ttyMT
226 ttyGS
227 camera-pipemgr
228 mt3326-gps
229 camera-sysram
230 camera-isp
231 FM50AF
232 kd_camera_hw
233 DumChar
234 accdet
235 mtk-adc-cali
236 mtk_disp
237 MTK_SMI
238 dummy_eeprom
239 dummy_cam_cal
240 hall_dev
241 AGOLD_DRIVER
242 mtk_jpeg
243 pmt
244 kd_camera_flashlight
245 flash_info
246 btn
247 mtk_almk
248 btif
249 MT_pmic_adc_cali
250 mtkfb_vsync
251 mmp
252 sched
253 BOOT
254 rtc
Block devices:
259 blkext
7 loop
8 sd
31 mtdblock
65 sd
66 sd
67 sd
68 sd
69 sd
70 sd
71 sd
128 sd
129 sd
130 sd
131 sd
132 sd
133 sd
134 sd
135 sd
179 mmc
253 zram
254 device-mapper
[email protected]_v92_zlh_hd:/ $
C:\Program Files (x86)\Shuame>adb shell
[email protected]_v92_zlh_hd:/ $ cat /proc/partitions
cat /proc/partitions
major minor #blocks name
7 0 1254 loop0
253 0 1048576 zram0
179 0 15246336 mmcblk0
179 1 1 mmcblk0p1
179 2 10240 mmcblk0p2
179 3 10240 mmcblk0p3
179 4 6144 mmcblk0p4
179 5 819200 mmcblk0p5
179 6 131072 mmcblk0p6
179 7 1212416 mmcblk0p7
179 8 13001728 mmcblk0p8
179 64 2048 mmcblk0boot1
179 32 2048 mmcblk0boot0
179 96 7764992 mmcblk1
179 97 7760896 mmcblk1p1
[email protected]_v92_zlh_hd:/ $ mount
mount
rootfs / rootfs ro,relatime 0 0
tmpfs /dev tmpfs rw,nosuid,relatime,mode=755 0 0
devpts /dev/pts devpts rw,relatime,mode=600 0 0
proc /proc proc rw,relatime 0 0
sysfs /sys sysfs rw,relatime 0 0
none /acct cgroup rw,relatime,cpuacct 0 0
tmpfs /mnt/secure tmpfs rw,relatime,mode=700 0 0
tmpfs /mnt/asec tmpfs rw,relatime,mode=755,gid=1000 0 0
tmpfs /mnt/obb tmpfs rw,relatime,mode=755,gid=1000 0 0
none /dev/cpuctl cgroup rw,relatime,cpu 0 0
/[email protected] /system ext4 ro,noatime,noauto_da_alloc,commit=1,data=ordered 0 0
/[email protected] /data ext4 rw,nosuid,nodev,noatime,discard,noauto_da_alloc,data=or
dered 0 0
/[email protected] /cache ext4 rw,nosuid,nodev,noatime,discard,noauto_da_alloc,data=ord
ered 0 0
/[email protected]_f /protect_f ext4 rw,nosuid,nodev,noatime,nodelalloc,noauto_da_all
oc,commit=1,data=ordered 0 0
/[email protected]_s /protect_s ext4 rw,nosuid,nodev,noatime,nodelalloc,noauto_da_all
oc,commit=1,data=ordered 0 0
/dev/block/loop0 /mnt/cd-rom iso9660 ro,relatime 0 0
/dev/block/vold/179:8 /storage/sdcard1 vfat rw,dirsync,nosuid,nodev,noexec,relat
ime,uid=1000,gid=1015,fmask=0702,dmask=0702,allow_utime=0020,codepage=cp437,ioch
arset=iso8859-1,shortname=mixed,utf8,errors=remount-ro 0 0
/dev/block/vold/179:97 /storage/sdcard0 vfat rw,dirsync,nosuid,nodev,noexec,rela
time,uid=1000,gid=1015,fmask=0702,dmask=0702,allow_utime=0020,codepage=cp437,ioc
harset=iso8859-1,shortname=mixed,utf8,errors=remount-ro 0 0
/dev/block/vold/179:97 /mnt/secure/asec vfat rw,dirsync,nosuid,nodev,noexec,rela
time,uid=1000,gid=1015,fmask=0702,dmask=0702,allow_utime=0020,codepage=cp437,ioc
harset=iso8859-1,shortname=mixed,utf8,errors=remount-ro 0 0
tmpfs /storage/sdcard0/.android_secure tmpfs ro,relatime,size=0k,mode=000 0 0
[email protected]_v92_zlh_hd:/ $
BliNeR-KeY said:
hello i flash my drivice mtk6592 ( star n3+ ocracore ) with a same rom.
is not first time to i flash rom, but dhis new phone worked just a 30 min
after flash my touch screen dont work . and imei ( imei fix ok)
i try so send a lots rom , rom accept never found error . same my touch screen dont work.
and factory rom no success.
maybe i need to edit scatter file?
maybe my touch screen is bricked?
maybe my touch screen have hardware problem?
Click to expand...
Click to collapse
Same happened to me. Have you managed to fix this issue?
anyone found solution?
same happened to me too. i've tried removing the digitizer, but i don't think the problem is in digitizer. when it's connected i can see touchscreen: ili2113a in factory mode. when i disconnect the digitizer, i can see touchscreen: (null)
so digitizer should be working. i've tried flashing like 15 roms, but didn't manage to fix the problem.
anyone found a solution?
hello
you solved?
---------- Post added at 11:45 AM ---------- Previous post was at 11:34 AM ----------
maybe not yet solved
İ have same as your problem. My device is General Mobile etab5. Calibration failed it says invalid value: 165
Hi , i have an AEG AX350 and only s4 an s3 clones mt6572 firmwares bootup and sounds but the screen stay white .
There is no rom for this smartphone ,any ideas? the phone has 512mb ram ,4gb rom ,processor mt6572 dual core, 3.5 inch screen ,dual sim and 3g, front camera and 3mp rear camera ,any chinese phone with this specs?
there is a build from this phone:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=JDQ39
ro.build.display.id=AX350_V08_20140812
ro.build.version.incremental=eng.wangpeirong.1407830468
ro.custom.build.version=1407830468
ro.build.version.sdk=17
ro.build.version.codename=REL
ro.build.version.release=4.2.2
ro.build.date=2014年 08月 12日 星期二 16:04:39 CST
ro.build.date.utc=1407830679
ro.build.type=user
ro.build.user=wangpeirong
ro.product.model=AEG AX350
ro.product.name=AX350
ro.product.device=AX350
ro.product.board=AX350
# ro.build.product is obsolete; use ro.product.device
ro.build.product=AX350
ro.build.host=server
ro.build.tags=test-keys
ro.product.brand=AUX
ro.product.manufacturer=AUX
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=alps
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=a002p_emmc_72m_portugal-user 4.2.2 JDQ39 eng.wangpeirong.1407830468 test-keys
ro.build.fingerprint=AEG/A002/A002:4.2.2/JDQ39/1407830468:user/test-keys
ro.build.flavor=
ro.build.characteristics=default
persist.sys.language=pt
persist.sys.country=PT
persist.sys.localevar=
persist.sys.timezone=Europe/London
ro.product.locale.language=pt
ro.product.locale.region=PT
# end build properties
# begin mediatek build properties
ro.mediatek.version.release=AX350_V06_20140704
ro.mediatek.platform=MT6572
ro.mediatek.chip_ver=S01
ro.mediatek.version.branch=ALPS.JB3.MP
ro.mediatek.version.sdk=1
# end mediatek build properties
#
# system.prop for generic sdk
#
rild.libpath=/system/lib/mtk-ril.so
rild.libargs=-d /dev/ttyC0
# MTK, Infinity, 20090720 {
wifi.interface=wlan0
# MTK, Infinity, 20090720 }
# MTK, mtk03034, 20101210 {
ro.mediatek.wlan.wsc=1
# MTK, mtk03034 20101210}
# MTK, mtk03034, 20110318 {
ro.mediatek.wlan.p2p=1
# MTK, mtk03034 20110318}
# MTK, mtk03034, 20101213 {
mediatek.wlan.ctia=0
# MTK, mtk03034 20101213}
#
wifi.tethering.interface=ap0
#
ro.opengles.version=131072
wifi.direct.interface=p2p0
dalvik.vm.heapgrowthlimit=96m
dalvik.vm.heapsize=128m
# USB MTP WHQL
ro.sys.usb.mtp.whql.enable=0
# Power off opt in IPO
sys.ipo.pwrdncap=2
ro.sys.usb.storage.type=mtp,mass_storage
# USB BICR function
ro.sys.usb.bicr=yes
# USB Charge only function
ro.sys.usb.charging.only=yes
# audio
ro.camera.sound.forced=0
ro.audio.silent=0
ro.zygote.preload.enable=0
# temporary enables NAV bar (soft keys)
# qemu.hw.mainkeys=0
ro.kernel.zio=38,108,105,16
ro.operator.optr=CUST
#
# ADDITIONAL_BUILD_PROPERTIES
#
persist.gemini.sim_num=2
ro.gemini.smart_sim_switch=false
ro.gemini.smart_3g_switch=1
ril.specific.sm_cause=0
bgw.current3gband=0
ril.external.md=0
ro.sf.hwrotation=0
ril.current.share_modem=2
curlockscreen=1
ro.mediatek.gemini_support=true
persist.radio.fd.counter=15
persist.radio.fd.off.counter=5
persist.radio.fd.r8.counter=15
persist.radio.fd.off.r8.counter=5
persist.mtk.wcn.combo.chipid=-1
drm.service.enabled=true
fmradio.driver.enable=1
ril.first.md=1
ril.flightmode.poweroffMD=1
ril.telephony.mode=3
dalvik.vm.mtk-stack-trace-file=/data/anr/mtk_traces.txt
mediatek.wlan.chip=mediatek.wlan.module.postfix=_
ril.radiooff.poweroffMD=0
ter.service.enable=0
ro.config.notification_sound=AEG_mensage_ringtone.ogg
ro.config.alarm_alert=alarm01_mp3.ogg
ro.config.ringtone=AEG_Humanize_DEFAULT.ogg
ro.config.video_call=ring01_mp3.ogg
ro.setupwizard.mode=OPTIONAL
ro.com.google.gmsversion=4.2_r4
ro.com.google.clientidbase=android-enspert
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
# begin adupsfota properties
ro.fota.platform=MTK6572
ro.adups.fota.type=phone
ro.adups.fota.oem=aux6572
ro.adups.fota.device=AEG AX350
ro.adups.fota.version=AX350_V08_20140812
# begin adupsfota properties
thank you
Hi, I'm sorry but there is absolutely nothing on XDA regarding your phone. I'm going to ask that your post be moved here, http://forum.xda-developers.com/general/help Maybe someone will be able to help.
Similar handset
That actually sounds like an O+ 8.36z since it seems both this phone and your phone may have the same specs.
O+ 8.36z Specs:
3.5-inch IPS Capacitive Display, 480×320 pixels resolution, 160 dpi
Dual Camera with 3.1 Megapixel AF back camera with Flash + 0.3MP Front Camera
Android 4.2.2 (Jelly Bean)
Dual SIM/Dual Standby
Dual Core 1.0 GHz processor(MTK6572) with Mali-400 MP GPU
2G/3G
Quad Band GSM/Dual Band WCDMA
4GB Internal Memory, expandable up to 32GB microSD card
512MB RAM
Wi-Fi, Bluetooth
1500 mAh Battery
O+ 8.36z hardware/software details:
Code:
OS
Browser UserAgent : Mozilla/5.0 (Linux; U; Android 4.2.2; en-us; O+ 8.36z Android Build/OplusO+_8.36z_Android) AppleWebKit/534.30 (KHTML, like Gecko) Version/4.0 Mobile Safari/534.30
Android ID : 49767e19959b9250
BuildInfos
Android version : 4.2.2
Release Codename : REL
API LEVEL : 17
CPU ABI : armeabi-v7a
Manufacturer : Oplus
Bootloader : unknown
CPU ABI2 : armeabi
Hardware : mt6572
Radio : unknown
Board : O+_8.36z_Android
Brand : Oplus
Device : Oplus
Display : 8.36z_A_V8_0_5
Fingerprint : Oplus/O+_8.36z_Android/Oplus:4.2.2/OplusO+_8.36z_Android/8.36z_A_V8_0_5:user/test-keys
Host : znywb
ID : OplusO+_8.36z_Android
Model : O+ 8.36z Android
Product : O+_8.36z_Android
Tags : test-keys
Type : user
User : unknown
Battery
Level : 88 %
Technology : Li-ion
Temperature : 25.0 ∞C (77.0∞F)
Voltage : 4039 mV
Memory
Download Cache Max: 590MB/ Free: 580MB
data Max: 1.27GB/ Free: 501MB
External storage: mounted
External storage Max: 7.39GB/ Free: 186MB
External storage removable: true
External storage emulated: false
External SDCard Max: 662MB/ Free: 192MB
Total RAM: 474MB
Free RAM: 49.09MB
Threshold RAM: 43.57MB
CPU
Processor ARMv7 Processor rev 3 (v7l)
processor 0
BogoMIPS 1993.93
processor 1
BogoMIPS 1993.93
Features swp half thumb fastmult vfp edsp thumbee neon vfpv3 tls vfpv4 idiva idivt
CPU implementer 0x41
CPU architecture 7
CPU variant 0x0
CPU part 0xc07
CPU revision 3
Hardware MT6572
Revision 0000
Serial 0000000000000000
Frequency range: 598.0 -> 1001.0MHz
Current Frequency: 1001.0MHz
Frequency Stats (time):
- 1001.0 MHz 62.97% (11835868)
- 806.0 MHz 1.98% (373058)
- 598.0 MHz 35.04% (6586827)
Screen
Resolution: 320 x 480
Refresh Rate: 54.21
X factor for DIP: 1.0
Density: 160 dpi
Pixel per inch X: 159.37254 dpi Y: 160.42105 dpi
Environment
Root Directory: /system
Data Directory: /data
Download Cache Directory: /cache
External Storage State: mounted
External Storage Directory: /storage/sdcard0
Features
android.hardware.wifi
android.hardware.location.network
com.google.android.feature.GOOGLE_BUILD
android.hardware.location
android.hardware.screen.landscape
android.hardware.screen.portrait
android.hardware.wifi.direct
android.hardware.usb.accessory
android.hardware.camera.any
android.hardware.touchscreen.multitouch.distinct
android.hardware.bluetooth
android.hardware.sensor.light
android.hardware.microphone
android.hardware.camera.autofocus
android.software.live_wallpaper
android.hardware.telephony
android.hardware.touchscreen.multitouch.jazzhand
android.hardware.usb.host
android.hardware.touchscreen.multitouch
android.hardware.faketouch
android.hardware.camera
android.hardware.sensor.proximity
android.hardware.location.gps
android.hardware.telephony.gsm
android.hardware.camera.front
android.hardware.touchscreen
android.hardware.sensor.accelerometer
glEsVers=2.0
Mount points
MountPoint
Name Type Options
- /
rootfs rootfs ro,relatime
- /dev
tmpfs tmpfs rw,nosuid,relatime,mode=755
- /dev/pts
devpts devpts rw,relatime,mode=600
- /proc
proc proc rw,relatime
- /sys
sysfs sysfs rw,relatime
- /acct
none cgroup rw,relatime,cpuacct
- /mnt/secure
tmpfs tmpfs rw,relatime,mode=700
- /mnt/asec
tmpfs tmpfs rw,relatime,mode=755,gid=1000
- /mnt/obb
tmpfs tmpfs rw,relatime,mode=755,gid=1000
- /dev/cpuctl
none cgroup rw,relatime,cpu
- /system
/[email protected] ext4 ro,noatime,noauto_da_alloc,commit=1,data=ordered
- /data
/[email protected] ext4 rw,nosuid,nodev,noatime,discard,noauto_da_alloc,da ta=ordered
- /cache
/[email protected] ext4 rw,nosuid,nodev,noatime,discard,noauto_da_alloc,da ta=ordered
- /protect_f
/[email protected]_f ext4 rw,nosuid,nodev,noatime,nodelalloc,noauto_da_alloc ,commit=1,data=ordered
- /protect_s
/[email protected]_s ext4 rw,nosuid,nodev,noatime,nodelalloc,noauto_da_alloc ,commit=1,data=ordered
- /mnt/cd-rom
/dev/block/loop0 iso9660 ro,relatime
- /storage/sdcard1
/dev/block/vold/179:7 vfat rw,dirsync,nosuid,nodev,noexec,relatime,uid=1000,g id=1015,fmask=0702,dmask=0702,allow_utime=0020,cod epage=cp437,iocharset=iso8859-1,shortname=mixed,utf8,errors=remount-ro
- /storage/sdcard0
/dev/block/vold/179:97 vfat rw,dirsync,nosuid,nodev,noexec,relatime,uid=1000,g id=1015,fmask=0702,dmask=0702,allow_utime=0020,cod epage=cp437,iocharset=iso8859-1,shortname=mixed,utf8,errors=remount-ro
Tatsun0x0 said:
That actually sounds like an O+ 8.36z since it seems both this phone and your phone may have the same specs.
O+ 8.36z Specs:
3.5-inch IPS Capacitive Display, 480×320 pixels resolution, 160 dpi
Dual Camera with 3.1 Megapixel AF back camera with Flash + 0.3MP Front Camera
Android 4.2.2 (Jelly Bean)
Dual SIM/Dual Standby
Dual Core 1.0 GHz processor(MTK6572) with Mali-400 MP GPU
2G/3G
Quad Band GSM/Dual Band WCDMA
4GB Internal Memory, expandable up to 32GB microSD card
512MB RAM
Wi-Fi, Bluetooth
1500 mAh Battery
O+ 8.36z hardware/software details:
Code:
OS
Browser UserAgent : Mozilla/5.0 (Linux; U; Android 4.2.2; en-us; O+ 8.36z Android Build/OplusO+_8.36z_Android) AppleWebKit/534.30 (KHTML, like Gecko) Version/4.0 Mobile Safari/534.30
Android ID : 49767e19959b9250
BuildInfos
Android version : 4.2.2
Release Codename : REL
API LEVEL : 17
CPU ABI : armeabi-v7a
Manufacturer : Oplus
Bootloader : unknown
CPU ABI2 : armeabi
Hardware : mt6572
Radio : unknown
Board : O+_8.36z_Android
Brand : Oplus
Device : Oplus
Display : 8.36z_A_V8_0_5
Fingerprint : Oplus/O+_8.36z_Android/Oplus:4.2.2/OplusO+_8.36z_Android/8.36z_A_V8_0_5:user/test-keys
Host : znywb
ID : OplusO+_8.36z_Android
Model : O+ 8.36z Android
Product : O+_8.36z_Android
Tags : test-keys
Type : user
User : unknown
Battery
Level : 88 %
Technology : Li-ion
Temperature : 25.0 ∞C (77.0∞F)
Voltage : 4039 mV
Memory
Download Cache Max: 590MB/ Free: 580MB
data Max: 1.27GB/ Free: 501MB
External storage: mounted
External storage Max: 7.39GB/ Free: 186MB
External storage removable: true
External storage emulated: false
External SDCard Max: 662MB/ Free: 192MB
Total RAM: 474MB
Free RAM: 49.09MB
Threshold RAM: 43.57MB
CPU
Processor ARMv7 Processor rev 3 (v7l)
processor 0
BogoMIPS 1993.93
processor 1
BogoMIPS 1993.93
Features swp half thumb fastmult vfp edsp thumbee neon vfpv3 tls vfpv4 idiva idivt
CPU implementer 0x41
CPU architecture 7
CPU variant 0x0
CPU part 0xc07
CPU revision 3
Hardware MT6572
Revision 0000
Serial 0000000000000000
Frequency range: 598.0 -> 1001.0MHz
Current Frequency: 1001.0MHz
Frequency Stats (time):
- 1001.0 MHz 62.97% (11835868)
- 806.0 MHz 1.98% (373058)
- 598.0 MHz 35.04% (6586827)
Screen
Resolution: 320 x 480
Refresh Rate: 54.21
X factor for DIP: 1.0
Density: 160 dpi
Pixel per inch X: 159.37254 dpi Y: 160.42105 dpi
Environment
Root Directory: /system
Data Directory: /data
Download Cache Directory: /cache
External Storage State: mounted
External Storage Directory: /storage/sdcard0
Features
android.hardware.wifi
android.hardware.location.network
com.google.android.feature.GOOGLE_BUILD
android.hardware.location
android.hardware.screen.landscape
android.hardware.screen.portrait
android.hardware.wifi.direct
android.hardware.usb.accessory
android.hardware.camera.any
android.hardware.touchscreen.multitouch.distinct
android.hardware.bluetooth
android.hardware.sensor.light
android.hardware.microphone
android.hardware.camera.autofocus
android.software.live_wallpaper
android.hardware.telephony
android.hardware.touchscreen.multitouch.jazzhand
android.hardware.usb.host
android.hardware.touchscreen.multitouch
android.hardware.faketouch
android.hardware.camera
android.hardware.sensor.proximity
android.hardware.location.gps
android.hardware.telephony.gsm
android.hardware.camera.front
android.hardware.touchscreen
android.hardware.sensor.accelerometer
glEsVers=2.0
Mount points
MountPoint
Name Type Options
- /
rootfs rootfs ro,relatime
- /dev
tmpfs tmpfs rw,nosuid,relatime,mode=755
- /dev/pts
devpts devpts rw,relatime,mode=600
- /proc
proc proc rw,relatime
- /sys
sysfs sysfs rw,relatime
- /acct
none cgroup rw,relatime,cpuacct
- /mnt/secure
tmpfs tmpfs rw,relatime,mode=700
- /mnt/asec
tmpfs tmpfs rw,relatime,mode=755,gid=1000
- /mnt/obb
tmpfs tmpfs rw,relatime,mode=755,gid=1000
- /dev/cpuctl
none cgroup rw,relatime,cpu
- /system
/[email protected] ext4 ro,noatime,noauto_da_alloc,commit=1,data=ordered
- /data
/[email protected] ext4 rw,nosuid,nodev,noatime,discard,noauto_da_alloc,da ta=ordered
- /cache
/[email protected] ext4 rw,nosuid,nodev,noatime,discard,noauto_da_alloc,da ta=ordered
- /protect_f
/[email protected]_f ext4 rw,nosuid,nodev,noatime,nodelalloc,noauto_da_alloc ,commit=1,data=ordered
- /protect_s
/[email protected]_s ext4 rw,nosuid,nodev,noatime,nodelalloc,noauto_da_alloc ,commit=1,data=ordered
- /mnt/cd-rom
/dev/block/loop0 iso9660 ro,relatime
- /storage/sdcard1
/dev/block/vold/179:7 vfat rw,dirsync,nosuid,nodev,noexec,relatime,uid=1000,g id=1015,fmask=0702,dmask=0702,allow_utime=0020,cod epage=cp437,iocharset=iso8859-1,shortname=mixed,utf8,errors=remount-ro
- /storage/sdcard0
/dev/block/vold/179:97 vfat rw,dirsync,nosuid,nodev,noexec,relatime,uid=1000,g id=1015,fmask=0702,dmask=0702,allow_utime=0020,cod epage=cp437,iocharset=iso8859-1,shortname=mixed,utf8,errors=remount-ro
Click to expand...
Click to collapse
Thanks for help ,i try to flash the rom of your handset but the same happends,white screen only sounds
sorry for revive the old post, but i would like to flash a master g tablet... i guess that it is the same OR a "8312c" variable... not sure at all
can some one dump there note 7 system please and post it on here
Here is my system dump
Recall replacement note 7. Locked bootloader
Downgrading not avalible. Samsung blocked.
..:: System Info
Available Memory (Mb)=1159
Total Memory (Mb)=3383
ANDROID_ID=8c54d762de3533a6
CURRENT_TIME_MILLIS=1474609909051
TIME-STAMP=Fri Sep 23 01:51:49 EDT 2016
LOCALE=en_US
ANDROID_ROOT=/system
KNOX_STORAGE=/data/knox/ext_sdcard
ENC_EMULATED_STORAGE_TARGET=/storage/enc_emulated
MC_AUTH_TOKEN_PATH=/efs/TEE
LD_PRELOAD=libsigchain.so
ANDROID_BOOTLOGO=1
EXTERNAL_STORAGE=/sdcard
SYSTEMSERVERCLASSPATH=/system/framework/services.jar:/system/framework/ethernet-service.jar:/system/framework/wifi-service.jar:/system/framework/ssrm.jar
ANDROID_SOCKET_zygote=12
ANDROID_DATA=/data
PATH=/sbin:/vendor/bin:/system/sbin:/system/bin:/system/xbin
ANDROID_ASSETS=/system/app
ASEC_MOUNTPOINT=/mnt/asec
BOOTCLASSPATH=/system/framework/core-libart.jar:/system/framework/conscrypt.jar:/system/framework/okhttp.jar:/system/framework/core-junit.jar:/system/framework/bouncycastle.jar:/system/framework/ext.jar:/system/framework/framework.jar:/system/framework/telephony-common.jar:/system/framework/voip-common.jar:/system/framework/ims-common.jar:/system/framework/apache-xml.jar:/system/framework/org.apache.http.legacy.boot.jar:/system/framework/sec_edm.jar:/system/framework/sagearpolicymanager.jar:/system/framework/secocsp.jar:/system/framework/commonimsinterface.jar:/system/framework/imsmanager.jar:/system/framework/sprengine.jar:/system/framework/timakeystore.jar:/system/framework/fipstimakeystore.jar:/system/framework/smartbondingservice.jar:/system/framework/knoxvpnuidtag.jar:/system/framework/sec_sdp_sdk.jar:/system/framework/sec_sdp_hidden_sdk.jar:/system/framework/sprintextension.jar:/system/framework/tcmiface.jar:/system/framework/dpmapi.jar:/system/framework/qcmediaplayer.jar
ANDROID_PROPERTY_WORKSPACE=10,0
ANDROID_STORAGE=/storage
..:: Version Info
CodeName=REL
Incremental=N930PVPU2APHE
Release=6.0.1
SDK=23
SDK-Version=23
..:: Build Info
Board=msm8996
Brand=samsung
CPU ABI=arm64-v8a
Device=graceqltespr
Display=MMB29M.N930PVPU2APHE
Fingerprint=samsung/graceqltespr/graceqltespr:6.0.1/MMB29M/N930PVPU2APHE:user/release-keys
Host=SWHC3701
ID=MMB29M
Manufacturer=samsung
Model=SM-N930P
Product=graceqltespr
Tags=release-keys
Time=1474040130000
Type=user
User=dpi
..:: Screen Info
DisplayId=0
Resolution=1440x2560
Orientation=0
RefreshRate (fps)=60.000004
Density Dpi=640
Density=4.0
Scaled density=4.0
Xdpi=515.154
Ydpi=520.192
..:: DateTime Info
Locale= en_US
Locale Country= US
Locale Language= English
Locale Variant=
Locale ISO Country= USA
..:: TimeZone
TimeZone Name= Eastern Standard Time
TimeZone DST Saving= 3600000
TimeZone Row offset= -18000000
TimeZone SHORT= 0
..:: Secure Info
INSTALL_NON_MARKET_APPS=1
WIFI_WATCHDOG_ON=1
WIFI_NETWORKS_AVAILABLE_NOTIFICATION_ON=0
ANDROID_ID=8c54d762de3533a6
LOCATION_PROVIDERS_ALLOWED=network,gps
ADB_ENABLED=1
WIFI_ON=1
DATA_ROAMING=1
DEVICE_PROVISIONED=1
BLUETOOTH_ON=1
USB_MASS_STORAGE_ENABLED=1
..:: Telephony Info
IMEI=35958907307588
CallState=IDLE
DataActivity=DORMANT
DataState= CONNECTED
NetworkType= 13
PhoneType= CDMA
SimState= READY
CellLocation= [0,2147483647,2147483647,0,0,9488,78108442]
DeviceSoftwareVersion= 01
Line1Number= 9126023011
NetworkCountryIso= us
NetworkOperator=310120
NetworkOperatorName=Sprint
SimCountryIso=us
SimOperator=310120
SimSerialNumber=89011202002157441422
SubscriberId=310009125713353
VoiceMailAlphaTag=Voicemail
VoiceMailNumber=9126023011
..:: File build.prop
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=MMB29M
ro.build.display.id=MMB29M.N930PVPU2APHE
ro.build.version.incremental=N930PVPU2APHE
ro.build.version.sdk=23
ro.build.version.preview_sdk=0
ro.build.version.codename=REL
ro.build.version.all_codenames=REL
ro.build.version.release=6.0.1
ro.build.version.security_patch=2016-08-01
ro.build.version.base_os=
ro.build.date=Sat Sep 17 00:35:30 KST 2016
ro.build.date.utc=1474040130
ro.build.type=user
ro.build.user=dpi
ro.build.host=SWHC3701
ro.build.tags=release-keys
ro.build.flavor=graceqltespr-user
ro.product.model=SM-N930P
ro.product.brand=samsung
ro.product.name=graceqltespr
ro.product.device=graceqltespr
ro.product.board=msm8996
# ro.product.cpu.abi and ro.product.cpu.abi2 are obsolete,
# use ro.product.cpu.abilist instead.
ro.product.cpu.abi=arm64-v8a
ro.product.cpu.abilist=arm64-v8a,armeabi-v7a,armeabi
ro.product.cpu.abilist32=armeabi-v7a,armeabi
ro.product.cpu.abilist64=arm64-v8a
ro.product.manufacturer=samsung
ro.product.locale=en-US
ro.wifi.channels=
ro.board.platform=msm8996
# ro.build.product is obsolete; use ro.product.device
ro.build.product=graceqltespr
# Do not try to parse description, fingerprint, or thumbprint
ro.build.description=graceqltespr-user 6.0.1 MMB29M N930PVPU2APHE release-keys
ro.build.fingerprint=samsung/graceqltespr/graceqltespr:6.0.1/MMB29M/N930PVPU2APHE:user/release-keys
ro.build.characteristics=chameleon
# Samsung Specific Properties
ro.build.PDA=N930PVPU2APHE
ro.build.hidden_ver=N930PVPU2APHE
ro.config.rm_preload_enabled=0
ro.build.changelist=8706608
ro.product_ship=true
ro.build.official.release=true
ro.chipname=MSM8996
# end build properties
#
# HWUI_BUILD_PROPERTIES
#
ro.hwui.texture_cache_size=88
ro.hwui.layer_cache_size=58
ro.hwui.path_cache_size=16
ro.hwui.texture_cache_flushrate=0.4
ro.hwui.shape_cache_size=4
ro.hwui.gradient_cache_size=2
ro.hwui.drop_shadow_cache_size=6
ro.hwui.r_buffer_cache_size=8
ro.hwui.text_small_cache_width=1024
ro.hwui.text_small_cache_height=1024
ro.hwui.text_large_cache_width=4096
ro.hwui.text_large_cache_height=2048
ro.hwui.fbo_cache_size=16
#
# from device/samsung/graceqltespr/system.prop
#
#
# system.prop for msm8996
#
ro.sf.lcd_density=640
debug.sf.hw=1
debug.egl.hw=1
debug.gralloc.enable_fb_ubwc=1
dalvik.vm.heapsize=36m
dev.pm.dyn_samplingrate=1
persist.demo.hdmirotationlock=false
#ro.hdmi.enable=true
#persist.speaker.prot.enable=false
qcom.hw.aac.encoder=true
#system props for the MM modules
media.stagefright.enable-player=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-fma2dp=true
media.stagefright.enable-scan=true
mmp.enable.3g2=true
media.aac_51_output_enabled=true
mm.enable.smoothstreaming=true
#3314291: Decimal sum after adding FLAC parser flag 131072
#37491 is decimal sum of supported codecs in AAL
#codecs: DivX DivXHD AVI AC3 ASF AAC QCP DTS 3G2 MP2TS
mm.enable.qcom_parser=3314291
persist.mm.enable.prefetch=true
# Additional i/p buffer in case of encoder DCVS
vidc.enc.dcvs.extra-buff-count=2
#
# system props for the data modules
#
#ro.use_data_netmgrd=true
#persist.data.netmgrd.qos.enable=true
#persist.data.mode=concurrent
persist.data.dpm.enable=true
#system props for time-services
persist.timed.enable=true
#
# system prop for opengles version
#
# 196608 is decimal for 0x30000 to report version 3
ro.opengles.version=196609
# system property for maximum number of HFP client connections
#bt.max.hfpclient.connections=1
# System property for cabl
ro.qualcomm.cabl=1
#Simulate sdcard on /data/media
#
persist.fuse_sdcard=true
#system prop for Bluetooth SOC type
#qcom.bluetooth.soc=rome
#system prop for A4WP profile support
#ro.bluetooth.a4wp=true
#system prop for wipower support
#ro.bluetooth.wipower=true
#Set this true as ROME which is programmed
#as embedded wipower mode by deafult
#ro.bluetooth.emb_wp_mode=true
#
#snapdragon value add features
#
ro.qc.sdk.audio.ssr=false
##fluencetype can be "fluence" or "fluencepro" or "none"
ro.qc.sdk.audio.fluencetype=none
persist.audio.fluence.voicecall=true
persist.audio.fluence.voicerec=false
persist.audio.fluence.speaker=true
#system prop for RmNet Data
persist.rmnet.data.enable=true
persist.data.wda.enable=true
persist.data.df.dl_mode=5
persist.data.df.ul_mode=5
persist.data.df.agg.dl_pkt=10
persist.data.df.agg.dl_size=4096
persist.data.df.mux_count=8
persist.data.df.iwlan_mux=9
persist.data.df.dev_name=rmnet_usb0
#property to enable user to access Google WFD settings
persist.debug.wfd.enable=1
##property to choose between virtual/external wfd display
persist.sys.wfd.virtual=0
#property to enable sde downscale feature for external display
#sdm.debug.downscale_external=1
#property to specify the number of frames to skip before setting hint
sdm.perf_hint_window=50
#disable tunnel encoding
tunnel.audio.encode=false
#disable gapless by default
audio.offload.gapless.enabled=false
#Buffer size in kbytes for compress offload playback
audio.offload.buffer.size.kb=32
#Enable offload audio video playback by default
av.offload.enable=true
#Enable 16 bit PCM offload by default
audio.offload.pcm.16bit.enable=true
#Enable 24 bit PCM offload by default
audio.offload.pcm.24bit.enable=true
#Enable audio track offload by default
audio.offload.track.enabled=true
#enable voice path for PCM VoIP by default
use.voice.path.for.pcm.voip=true
# system prop for NFC DT
ro.nfc.port=I2C
#hwui properties
ro.hwui.texture_cache_size=72
ro.hwui.layer_cache_size=48
ro.hwui.r_buffer_cache_size=8
ro.hwui.path_cache_size=32
ro.hwui.gradient_cache_size=1
ro.hwui.drop_shadow_cache_size=6
ro.hwui.texture_cache_flushrate=0.4
ro.hwui.text_small_cache_width=1024
ro.hwui.text_small_cache_height=1024
ro.hwui.text_large_cache_width=2048
ro.hwui.text_large_cache_height=1024
#enable voice path for PCM VoIP by default
use.voice.path.for.pcm.voip=true
#Disable property for Dolby ds2
audio.dolby.ds2.enabled=false
#Disable property for hard bypass
audio.dolby.ds2.hardbypass=false
audio.offload.passthrough=false
audio.offload.multiple.enabled=false
# enable navigation bar
qemu.hw.mainkeys=1
#property to enable VDS WFD solution
persist.hwc.enable_vds=1
#Enable stm events
#Samsung Disable this because of too poor performance when it enabled.
ro.dbg.coresight.config=stm_events_disabled
#property to enable fingerprint
persist.qfp=false
#Set SSC Debug Level on AP Side
persist.debug.sensors.hal=I
debug.qualcomm.sns.daemon=I
debug.qualcomm.sns.libsensor1=I
#Disable Sensor Feature
ro.qti.sensors.georv=false
ro.qti.sensors.cmc=false
ro.qti.sensors.dpc=false
ro.qti.sensors.facing=false
ro.qti.sensors.fast_amd=false
ro.qti.sensors.scrn_ortn=false
#Disable rotator split feature
sdm.debug.disable_rotator_split=1
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.astcenc.astcsupport=1
ro.mct.compressiontype=ETC1
ro.config.dmverity=true
ro.config.rkp=true
ro.config.kap_default_on=true
ro.config.kap=true
ro.use_data_netmgrd=true
persist.radio.sib16_support=0
ro.ril.ecclist=911,#911,*911
ril.subscription.types=NV,RUIM
ro.com.android.dataroaming=true
ro.telephony.default_network=10
ro.cdma.default_numeric=310000
ro.cdma.default_alpha=Chameleon
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=256m
dalvik.vm.heapsize=512m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=2m
dalvik.vm.heapmaxfree=8m
keyguard.no_require_sim=true
ro.carrier=unknown
ro.security.icd.flagmode=multi
ro.com.google.clientidbase=android-samsung
ro.vendor.extension_library=libqti-perfd-client.so
persist.radio.apm_sim_not_pwdn=1
persist.radio.custom_ecc=1
af.fast_track_multiplier=1
audio_hal.period_size=192
camera.disable_zsl_mode=1
security.mdpp.mass=skmm
ro.build.scafe.version=2016B
ro.build.scafe.size=short
ro.build.scafe.shot=double
ro.build.scafe.syrup=sugar
ro.build.scafe.cream=white
ro.security.vpnpp.ver=1.4
ro.security.vpnpp.release=7.0
ro.frp.pst=/dev/block/persistent
ro.error.receiver.default=com.samsung.receiver.error
ro.hdcp2.rx=tz
ro.secwvk=144
ro.securestorage.support=true
security.mdpp=None
ro.security.mdpp.ver=2.0
ro.security.mdpp.release=8
security.mdpp.result=None
ro.hardware.keystore=mdfpp
ro.hardware.gatekeeper=mdfpp
ro.sec.fle.encryption=true
sys.config.bigdata_enable=true
sys.config.bigdata_mem_enable=true
ro.config.dha_cached_min=8
ro.config.dha_cached_max=16
ro.config.dha_empty_min=8
ro.config.dha_empty_max=32
ro.config.dha_th_rate=1.7
ro.config.dha_pwhitelist_enable=1
ro.config.fall_prevent_enable=true
ro.security.mdpp.ux=Enabled
ro.location.hwflp=true
ro.config.notification_sound=Grace_Note.ogg
ro.config.vc_call_vol_steps=7
ro.config.ringtone=Over_the_Horizon.ogg
ro.config.alarm_alert=Morning_Flower.ogg
ro.config.media_sound=Media_preview_Touch_the_light.ogg
ro.config.ringtone_2=Basic_Bell.ogg
ro.config.notification_sound_2=S_
---------- Post added at 12:54 PM ---------- Previous post was at 12:05 PM ----------
Bug Report:
========================================================
== dumpstate: 2016-09-23 01:49:30
========================================================
Build: MMB29M.N930PVPU2APHE
Build fingerprint: 'samsung/graceqltespr/graceqltespr:6.0.1/MMB29M/N930PVPU2APHE:user/release-keys'
Bootloader: N930PVPU2APHE
Radio: msm
Network: Sprint
Kernel: Linux version 3.18.20-8706608 ([email protected]) (gcc version 4.9.x-google 20150123 (prerelease) (GCC) ) #1 SMP PREEMPT Sat Sep 17 00:36:53 KST 2016
Command line: sched_enable_hmp=1 sched_enable_power_aware=1 console=null androidboot.hardware=qcom user_debug=31 msm_rtb.filter=0x37 ehci-hcd.park=3 lpm_levels.sleep_disabled=1 [email protected] rcupdate.rcu_expedited=1 cordon=18de89cf60c08101d18a58f34e0b1c44 connie=SM-N930P_SPR_USA_e7294b395efd48e0d4abcd2973cf9ec7 androidboot.ucs_mode=0 androidboot.security_mode=1526595585 androidboot.bootdevice=624000.ufshc androidboot.serialno=ce081608692bdc1002 androidboot.baseband=msm lcd_id=0x466080 lcd_id2=0xffffff mdss_mdp.panel=1:dsi:0:ss_dsi_panel_S6E3HA5_AMB567MK01_WQHD:config0:1:none:cfg:single_dsi androidboot.sec_atd.tty=/dev/ttyHSL0 androidboot.revision=11 androidboot.hmac_mismatch=0 androidboot.emmc_checksum=3 loglevel=4 [email protected] [email protected] sec_debug.reset_reason=0x0 [email protected] androidboot.debug_level=0x4f4c sec_debug.enable=0 sec_debug.enable_user=0 androidboot.cp_debug_level=0x55FF sec_debug.enable_cp_debug=0 androidboot.cp_reserved_mem=off androidboot.rtn_config=0 androidboot.boot_recovery=0 charging_mode=0x3030 pmic_info=3 ccic_info=1 androidboot.em.did=03eafda0ab88 androidboot.em.model=SM-N930P androidboot.em.status=0x0 androidboot.warranty_bit=0 androidboot.im.param.offset=9437232 androidboot.me.param.offset=9437312 androidboot.sn.param.offset=9437392 androidboot.pr.param.offset=9437472 androidboot.sku.param.offset=9437552 fg_reset=0 androidboot.bootloader=N930PVPU2APHE androidboot.carrierid.param.offset=9438268 androidboot.sales.param.offset=9438272 androidboot.carrierid=SPR androidboot.sales_code=SPR
------ HW REVISION (/sys/devices/soc0/revision) ------
3.1.3
------ UPTIME (uptime) ------
up time: 00:23:10, idle time: 00:45:19, sleep time: 00:00:00
[uptime: 0.038s elapsed]
------ UPTIME MMC PERF (/sys/block/mmcblk0/) ------
stat: 1623 71788 81379 7610 1403 8 1306472 673540 0 35740 681420
stat: read: 5475KB/s write: 993KB/s
mmcblk0p1/stat: 1620 71788 81307 7600 1403 8 1306472 673540 0 35730 681410
mmcblk0p1/stat: read: 5477KB/s write: 993KB/s
------ MEMORY INFO (/proc/meminfo) ------
MemTotal: 3464880 kB
MemFree: 55536 kB
MemAvailable: 1114144 kB
Buffers: 20676 kB
Cached: 1123268 kB
SwapCached: 99092 kB
Active: 1154392 kB
Inactive: 1154196 kB
Active(anon): 594564 kB
Inactive(anon): 594288 kB
Active(file): 559828 kB
Inactive(file): 559908 kB
Unevictable: 4488 kB
Mlocked: 4488 kB
SwapTotal: 2097148 kB
SwapFree: 1344608 kB
Dirty: 28 kB
Writeback: 48 kB
AnonPages: 1164312 kB
Mapped: 898104 kB
Shmem: 19980 kB
Slab: 218488 kB
SReclaimable: 69808 kB
SUnreclaim: 148680 kB
KernelStack: 45408 kB
PageTables: 78276 kB
NFS_Unstable: 0 kB
Bounce: 0 kB
WritebackTmp: 0 kB
CommitLimit: 3829588 kB
Committed_AS: 155971984 kB
VmallocTotal: 258998208 kB
VmallocUsed: 299648 kB
VmallocChunk: 258577892 kB
------ MEMORY INFO (/proc/meminfo_extra) ------
SystemHeap: 138192 kB
SystemHeapPool: 40316 kB
VmallocAPIsize: 14316 kB
KgslSharedmem: 233736 kB
ZSwapDevice: 211768 kB
------ CPU CORE INFO ------
- offline : -
- online : 0-3
- possible : 0-3
- cpu_normalized_load : -
- run_queue_avg : 0.8
- run_queue_poll_ms : -
0 1 2 3
------------------------------------------------------------------
cpu_utilization - - - -
cpuinfo_cur_freq - - - -
cpuinfo_max_freq 1593600 1593600 2150400 2150400
cpuinfo_min_freq 307200 307200 307200 307200
scaling_cur_freq 1593600 1593600 1036800 1036800
scaling_governor - - - -
scaling_max_freq - - 2150400 2150400
scaling_min_freq - - - -
------ CPU INFO (top -n 1 -d 1 -m 30 -t) ------
User 35%, System 30%, IOW 1%, IRQ 1%
User 178 + Nice 1 + Sys 155 + Idle 158 + IOW 8 + IRQ 4 + SIRQ 2 = 506
PID TID PR CPU% S VSS RSS PCY UID Thread Proc
1388 2346 3 9% S 2612888K 283180K fg system Binder_4 system_server
1388 2375 1 7% S 2612888K 283180K fg system Binder_5 system_server
17836 17836 3 4% R 8816K 4212K fg shell top top
16707 16719 0 3% S 1286468K 222680K fg u0_a236 Binder_2 com.estrongs.android.pop.pro
17115 17126 0 3% S 1792444K 233292K fg u0_a248 Binder_2 com.gtp.nextlauncher
3017 7583 0 3% S 1954296K 136004K fg u0_a29 Binder_5 com.google.android.gms
1388 1398 2 3% S 2612888K 283180K fg system HeapTaskDaemon system_server
1388 2766 3 2% S 2612888K 283180K fg system Binder_A system_server
142 142 1 2% S 0K 0K fg root kswapd0
1388 3173 0 2% S 2612888K 283180K fg system Binder_B system_server
1388 1407 2 0% S 2612888K 283180K fg system Binder_1 system_server
5832 5832 0 0% S 2292248K 126512K fg u0_a13 ktailbarservice com.samsung.android.app.cocktailbarservice
1388 3180 2 0% S 2612888K 283180K fg system Binder_F system_server
636 636 1 0% S 7508K 2476K fg system servicemanager /system/bin/servicemanager
41 41 2 0% S 0K 0K fg root smem_native_rpm
376 376 1 0% S 0K 0K fg root cfinteractive
322 322 0 0% S 0K 0K fg root kworker/u8:5
2367 2367 0 0% S 13696K 6948K fg wifi wpa_supplicant /system/bin/wpa_supplicant
324 324 0 0% S 0K 0K fg root kworker/u8:7
17831 17831 1 0% S 8052K 2512K fg shell dumpsys dumpsys
1388 3174 0 0% S 2612888K 283180K fg system Binder_C system_server
3109 16038 0 0% S 2285256K 110672K fg u0_a88 MicroRecognitio com.google.android.googlequicksearchbox:search
1388 1396 2 0% S 2612888K 283180K fg system FinalizerDaemon system_server
1388 2754 3 0% S 2612888K 283180K fg system Binder_9 system_server
637 728 1 0% S 255724K 28684K fg system Binder_2 /system/bin/surfaceflinger
637 758 0 0% S 255724K 28684K fg system EventThread /system/bin/surfaceflinger
16 16 2 0% S 0K 0K fg root ksoftirqd/2
17736 17736 2 0% S 0K 0K fg root kworker/u8:9
1059 1059 1 0% S 10916K 3528K fg system gatekeeperd /system/bin/gatekeeperd
355 355 3 0% S 0K 0K fg root irq/2-tsens_int
[top: 1.550s elapsed]
------ VIRTUAL MEMORY STATS (/proc/vmstat) ------
nr_free_pages 14460
nr_alloc_batch 422
nr_inactive_anon 149876
nr_active_anon 147523
nr_inactive_file 139273
nr_active_file 139855
nr_unevictable 1122
nr_mlock 1122
nr_anon_pages 291324
nr_mapped 223770
nr_file_pages 310682
nr_dirty 735
nr_writeback 0
nr_slab_reclaimable 18453
nr_slab_unreclaimable 37208
nr_page_table_pages 19642
nr_kernel_stack 2845
nr_unstable 0
nr_bounce 0
nr_vmscan_write 315926
nr_vmscan_immediate_reclaim 21
nr_writeback_temp 0
nr_isolated_anon 0
nr_isolated_file 0
nr_shmem 4996
nr_dirtied 270092
nr_written 585857
nr_pages_scanned 0
workingset_refault 378365
workingset_activate 176587
workingset_nodereclaim 0
nr_anon_transparent_hugepages 0
nr_free_cma 0
nr_swapcache 25264
nr_dirty_threshold 69793
nr_dirty_background_threshold 13958
pgpgin 5414021
pgpgout 1284932
pswpin 0
pswpout 0
pgalloc_dma 4275415
pgalloc_normal 5625687
pgalloc_movable 0
pgfree 9963797
pgactivate 1104477
pgdeactivate 1667928
pgfault 14938237
pgmajfault 133792
pgrefill_dma 799119
pgrefill_normal 1100066
pgrefill_movable 0
pgsteal_kswapd_dma 593170
pgsteal_kswapd_normal 815227
pgsteal_kswapd_movable 0
pgsteal_direct_dma 2287
pgsteal_direct_normal 3071
pgsteal_direct_movable 0
pgscan_kswapd_dma 942869
pgscan_kswapd_normal 1288427
pgscan_kswapd_movable 0
pgscan_direct_dma 7044
pgscan_direct_normal 9224
pgscan_direct_movable 0
pgscan_direct_throttle 0
pginodesteal 0
slabs_scanned 925100
kswapd_inodesteal 2435
kswapd_low_wmark_hit_quickly 301
kswapd_high_wmark_hit_quickly 153
pageoutrun 919
allocstall 94
pgrotated 32
drop_pagecache 0
drop_slab 0
pgmigrate_success 35287
pgmigrate_fail 0
compact_migrate_scanned 50170
compact_free_scanned 912555
compact_isolated 82705
compact_stall 4
compact_fail 0
compact_success 4
unevictable_pgs_culled 1926
unevictable_pgs_scanned 0
unevictable_pgs_rescued 2893
unevictable_pgs_mlocked 4015
unevictable_pgs_munlocked 2893
unevictable_pgs_cleared 0
unevictable_pgs_stranded 0
------ VIRTUAL MEMORY STATS TRACER (/proc/vmstat_tracer) ------
*** /proc/vmstat_tracer: No such file or directory
------ VMALLOC INFO (/proc/vmallocinfo) ------
0x0000000000000000-0x0000000000000000 69632 of_iomap+0x34/0x4c ioremap
0x0000000000000000-0x0000000000000000 8192 devm_ioremap+0x50/0x94 ioremap
0x0000000000000000-0x0000000000000000 8192 of_iomap+0x34/0x4c ioremap
0x0000000000000000-0x0000000000000000 8192 cpu_clock_8996_early_init+0x150/0xf7c ioremap
0x0000000000000000-0x0000000000000000 8192 cpu_clock_8996_early_init+0x18c/0xf7c ioremap
0x0000000000000000-0x0000000000000000 16384 devm_ioremap+0x50/0x94 ioremap
0x0000000000000000-0x0000000000000000 8192 user
0x0000000000000000-0x0000000000000000 12288 user
0x0000000000000000-0x0000000000000000 8192 sec_debug_init+0x3c/0x328 ioremap
0x0000000000000000-0x0000000000000000 8192 of_iomap+0x34/0x4c ioremap
0x0000000000000000-0x0000000000000000 8192 of_iomap+0x34/0x4c ioremap
0x0000000000000000-0x0000000000000000 8192 devm_ioremap+0x50/0x94 ioremap
0x0000000000000000-0x0000000000000000 40960 devm_ioremap+0x50/0x94 ioremap
0x0000000000000000-0x0000000000000000 20480 sps_bam_pipe_set_params+0x28c/0x494 pages=4 vmalloc
0x0000000000000000-0x0000000000000000 69632 devm_ioremap+0x50/0x94 ioremap
0x0000000000000000-0x0000000000000000 8192 msm_smd_probe+0xb4/0x604 ioremap
0x0000000000000000-0x0000000000000000 8192 msm_smd_probe+0xb4/0x604 ioremap
0x0000000000000000-0x0000000000000000 8192 msm_smd_probe+0xb4/0x604 ioremap
0x0000000000000000-0x0000000000000000 8192 msm_smd_probe+0xb4/0x604 ioremap
0x0000000000000000-0x0000000000000000 8192 devm_ioremap+0x50/0x94 ioremap
0x0000000000000000-0x0000000000000000 32768 devm_ioremap+0x50/0x94 ioremap
0x0000000000000000-0x0000000000000000 8192 ipa_uc_event_handler+0x170/0x220 ioremap
0x0000000000000000-0x0000000000000000 8192 devm_ioremap+0x50/0x94 ioremap
0x0000000000000000-0x0000000000000000 36864 remote_spinlock_init_address_hw+0xbc/0x138 ioremap
0x0000000000000000-0x0000000000000000 8192 glink_smem_native_probe+0x3b0/0x6d4 ioremap
0x0000000000000000-0x0000000000000000 16384 devm_ioremap+0x50/0x94 ioremap
0x0000000000000000-0x0000000000000000 1052672 of_iomap+0x34/0x4c ioremap
0x0000000000000000-0x0000000000000000 2101248 atomic_pool_init+0x0/0x1e8 user
0x0000000000000000-0x0000000000000000 8192 glink_smem_native_probe+0x3b0/0x6d4 ioremap
0x0000000000000000-0x0000000000000000 12288 tsens_tm_probe+0x5f0/0x2248 ioremap
0x0000000000000000-0x0000000000000000 12288 tsens_tm_probe+0x664/0x2248 ioremap
0x0000000000000000-0x0000000000000000 8192 glink_smem_native_probe+0x3b0/0x6d4 ioremap
0x0000000000000000-0x0000000000000000 8192 glink_rpm_native_probe+0x3cc/0x840 ioremap
0x0000000000000000-0x0000000000000000 36864 msm_smem_probe+0x574/0xbe0 ioremap
0x0000000000000000-0x0000000000000000 8192 devm_ioremap+0x50/0x94 ioremap
0x0000000000000000-0
vgt2tgz said:
Recall replacement note 7. Locked bootloader
Downgrading not avalible. Samsung blocked.
Click to expand...
Click to collapse
Would've been MUCH better to Pastebin that. Recall Note 7 is still downgradeable (sp?) if you haven't taken the PHE update as it has PH9 out the box.
Samsung note 7
Sorry bout, the mixup i didn't think of
posting the bin files.
I stupidly did the update
The second I got my hands on the phone. Hopefully a new root option soon.