Database Info

Odin Stock Flash SGH-I727-UCKJ2-k0nane.tar * Not Working * i727 Skyrocket

I am having trouble getting Odin flash to Pass. I am not new to the software, have done it many times on many different phones. I am using Odin 1.85 and placing SGH-I727-UCKJ2-k0nane.tar in the PDA slot with only Re-Boot checked just as stated but it freezes everytime I get to system.img.ext4.
Hence I am soft bricked and stuck in download mode with the yellow triangle ! showing.
Anyone else having this issue or know of a way to fix?
Things I have tried:
Different Computer
Different USB Slot
Different USB Cable
Different .tar download links
Kies will not acknowledge the phone

Just out of curiosity did you extract the 7zip?
Sent from my SAMSUNG-SGH-I727 using xda premium

I'm having the same exact problem, followed the procedures and ODIN failed.
It says Firmware upgrade encountered an issue and KIES wont recognize it either
and i did extract the 7zip for the TAR file
Phone is just stuck now
Help please

asoto88 said:
I'm having the same exact problem, followed the procedures and ODIN failed.
It says Firmware upgrade encountered an issue and KIES wont recognize it either
and i did extract the 7zip for the TAR file
Phone is just stuck now
Help please
Click to expand...
Click to collapse
I was stuck there just a little while ago. Will it boot into the warning screen where you press volume up to continue to download mode or straight to the "please connect to kies" screen?

ckck543 said:
I was stuck there just a little while ago. Will it boot into the warning screen where you press volume up to continue to download mode or straight to the "please connect to kies" screen?
Click to expand...
Click to collapse
Before it got stuck, it booted into the warning screen then i could continue into download mode
NOW, it just sits in "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.

change computer, if you can

got it to work
i used a older version of Odin, version 1.3
Worked perfect.
Thanks for your help guys

I'm having the same problem. I'm stuck at the "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again." Odin (both 1.3 and 1.85) hangs at system.img.ext4. Thanks in advance for any help.

Having the same problem, looking forward to some advice.

What exactly is happening and what exactly have you tried?
Sent from my SAMSUNG-SGH-I727 using xda premium

I'm having this problem as well.
I flashed to CM9 nightly and got it working beautifully before I realized I cannot access my Kies backup to retrieve my contacts and pictures.
Tried to return to stock and it hangs on <ID:0/003> system.img.ext4 with maybe 5% of the status bar complete.
I've attempted to re-download the rom as well as reinstalling the drivers. If I cancel the flash I'm able to reflash CWM using oden and use CWM to flash CM9 to get the phone functional again. This might help anyone with a bricked phone.
I've tried this several times, sometimes it will hang on recovery.img as well. Any help with this would be appreciated. I'll try downloading an older version of oden as recommended above and trying it that way. I'll also try a different computer.
Edit:
To add to this I was able to get Kies to recognize the phone at one point. I then tried to do a firmware recovery and it errors out saying there is an error with the device. Not sure if this means anything as Kies appears to be the crappiest software I've come across in a long time, It won't even detect my untouched Galaxy Tab 8.9 (SGH-i957) at all.
Edit2:
Just copied everything over to my laptop and tried again. Flashed without issue using odin 1.87 after installing kies. Problem appears to be a driver/connection problem on the computer end. Kinda weird as I've tried uninstalling/reinstalling drivers with no success on my desktop. Phone kept looping the ATT "Rethink Possible" boot animation. Had to go into the stock recovery and wipe partition and factory reset. Then it started up fine and is running with 2.3.5

[Q] Problem during rooting help

I was attempting to get root access to my galaxy tab 2 10.1 running android 10.2.1 (or whatever the latest Samsung update was it is 10.2 on my phone but am sure it was 10.2.1 on the tablet.
I was following this guide that someone here recommended
http://www.ibtimes.co.uk/articles/4...-p5113-android41-jellybean-android404-ics.htm
I set usb debug and made sure the drivers were on my pc and made sure KIES was completely not running
Followed the instructions to the letter but should have worried when I found the instructions to get to download were wrong - I found on videos that it was reboot using power and right volume key. That was successful
It connected to ODIN fine and the yellow box came up
I made sure the two boxes were ticked and then searched for the file
CF-Auto-Root-espresso10wifi-espresso10wifibby-gtp5113.zip and started ODIN
it seemed to be going fine until suddenly a red box came up with update failed
Now all I can get on the device is "firmware upgrade encountered an issue. Please select recovery mode in Kies and try again"
No matter how I try to restart this I get the same screen and imagine I couldn't connect to kies even if I should
Can anyone help as I am worried that I have bricked my device - I was looking for a simple way to get root without flashing a whole rom - or is that what I was doing anyway?

Here is a link that may can help you : http://forum.xda-developers.com/showthread.php?t=1722745
Try to do the point A to install CWM Recovery and root correctly the tab then do the point E to install the stock Android 4.0.4
ps : if you want to do something to your tab, try to search here before other websites, big community, good informations/tips (personnal advise) :good:

Maybe file you downloaded is corrupted , redownload it from xda or sammobile and do steps again

n0is said:
Here is a link that may can help you : http://forum.xda-developers.com/showthread.php?t=1722745
Try to do the point A to install CWM Recovery and root correctly the tab then do the point E to install the stock Android 4.0.4
ps : if you want to do something to your tab, try to search here before other websites, big community, good informations/tips (personnal advise) :good:
Click to expand...
Click to collapse
I will take a look but so far the only thing I get is the message to connect to KIES and it wont of course connect - cant get into any other modes - you would think they would have some kind of hard boot recovery button that gets you to basic screen to download the latest firmware.
And I did start here and believe that this led from a post here - I was trying to find the least complicated method of getting root access without changing what I already had too much - the only other process that I found on here seemed to have lots of people reporting problems if it wasn't a 3g model
It is beginning to look like I may have found out what bricking is - thanks for the reply anyway

would like to do that
mjrshark said:
Maybe file you downloaded is corrupted , redownload it from xda or sammobile and do steps again
Click to expand...
Click to collapse
In fact the instructions do say if it doesn't work first time, to run it again with the boxes unticked - the problem is that I cant get back to download mode, or any mode other than the message to connect to kies, so have no way of doing this. So looks like it may have bricked - is there any way of unbricking a tablet?:crying:
It's going to be an expensive mistake especially as I haven't even had the £50 cash back from Samsung yet and I would have to pay full price now to replace it,

So did you remove it from Odin after it failed?
If you connect and pull up Odin, even though its not in download mode, do you get an active com box showing its connected?
Have you tried kies yet?
There is a simple method of rooting in the link posted in the previous post by n0is. At this point you might have to flash a stock image before you try and root again. If you can get an active com port in Odin, run a stock image first, they can be found here in xda. Get it booted up and then make sure you are on the latest android version, its 4.1.1 here in the US. If you try and root first and then update, you will lose root so update first to avoid rooting twice.
Just to clarify the root procedures,
Odin the cwm recovery .tar from the thread.
Reboot to recovery then flash the super user zip for the p5113. It will ask you about erasing stock recovery or something like that, check yes.
And that's it, simple enough
Sent from my SCH-I535 using xda premium

not optamistic but will try!
samsgun357 said:
So did you remove it from Odin after it failed?
If you connect and pull up Odin, even though its not in download mode, do you get an active com box showing its connected?
Have you tried kies yet?
There is a simple method of rooting in the link posted in the previous post by n0is. At this point you might have to flash a stock image before you try and root again. If you can get an active com port in Odin, run a stock image first, they can be found here in xda. Get it booted up and then make sure you are on the latest android version, its 4.1.1 here in the US. If you try and root first and then update, you will lose root so update first to avoid rooting twice.
Just to clarify the root procedures,
Odin the cwm recovery .tar from the thread.
Reboot to recovery then flash the super user zip for the p5113. It will ask you about erasing stock recovery or something like that, check yes.
And that's it, simple enough
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
I will try but I don't think it is going to work. Whenever I connect the tablet by USB I get the usb connecting sound followed immediately by the USB disconnect sound - this just continues to happen every 4 seconds or so all the time that the device is connected. At the moment I have it on charge as once the error screen comes on it doesnt seem to go off for a very long time and then it wont start unless I charge it first. After a few minutes on charge - The firmware upgrade encountered an issue message comes up. I am going to leave it a while until I am sure it is fully charged and then try what you suggest - not optamistic though since I now realise that it is not even connecting properly. I just have a bad feeling about this. I had to disconnect it from the power yesterday because the error screen stays on continuously and the device starts to get warm
Assuming that I ever manage to get a stock image installed will this mean I can go back to normal kies updates - all I really wanted was the standard samsung android O/S but with super user added.
Unfortunately I had read the linked article a while back and what made me more confident was the statement that said it was "virtually impossible to brick this device"

Since it's still going into Charging mode and spitting out error messages, it's not completely bricked. It's just in a reboot loop (a.k.a. soft brick).
Keep trying to get it into Download mode. Sometimes the timing is a little tricky if it's in a boot loop.
1. Disconnect it before trying to get it into Download Mode. If it's plugged in (charger or PC), the device will go into Charging mode instead.
2. Hold the Power button for 10 seconds to make it reboot.
3. When you see the screen turn off, let go of Power and then press and hold Power and Volume Right/Up.
4. If done correctly, it will immediately go into Download Mode. If you see the Samsung logo instead, repeat from Step 2.

some progress but still stuck - any more ideas please
samsgun357 said:
So did you remove it from Odin after it failed?
If you connect and pull up Odin, even though its not in download mode, do you get an active com box showing its connected?
Have you tried kies yet?
There is a simple method of rooting in the link posted in the previous post by n0is. At this point you might have to flash a stock image before you try and root again. If you can get an active com port in Odin, run a stock image first, they can be found here in xda. Get it booted up and then make sure you are on the latest android version, its 4.1.1 here in the US. If you try and root first and then update, you will lose root so update first to avoid rooting twice.
Just to clarify the root procedures,
Odin the cwm recovery .tar from the thread.
Reboot to recovery then flash the super user zip for the p5113. It will ask you about erasing stock recovery or something like that, check yes.
And that's it, simple enough
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
Hi well thanks -
when I connected Odin it did show up yellow and so I downloaded the P5110 stock from from the other thread - all went well and it reported all OK and re-booted - saw the animated sequence but now it has stalled on the samsung logo and still wont connect to kies
So still stuck but at least it has moved on - The instructions on the other page were a little unclear about one stage
It said if there was pit file included to set something and tick repartition - this was all in one line and so I assumed part of the pit instruction - as there was no pit file I did not tick re-partition - I wonder if I should have done?
I have just reconnected to ODIN and the ID Com is still lit up yellow so presumably I could try running it again, or should I look on here for another stock rom - I am wondering if I have somehpw scewed up the bootloader and if so how I go about restoring it
ODIN is the only thing it connects to right now

No download mode, no recovery, detected by odin, not kies

Hi,
I rooted my brandnew GT-P3110 with cf, flashed pacman and cwm recovery. I do not blame anybody alse for my issues but myself. I guess I messed up the restoring of NON-system-apps:
After a day of troublefree use the tablet randomly rebooted and came back with the message "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.". No booting into recovery possible, no booting into download mode, no regular boot. Just the same message over and over again. Battery is unremovable.
I installed Kies, updated it, it downloaded drivers but under "emergency recovery" my tablet didn't appear. I then followed the "Firmware Upgrade and Initialization" procedure wich downloaded the necessary files but aborted with a korean text shown in the attachment after replugging the tablet. I tried this with 2 different USB-cables on several USB-ports. Kies btw asked me to remove the battery (not possible) after entering device number and serial-number. I turned off by pressing the off button instead and it turned on again.
I uninstalled Kies, rebooted, installed the samsung drivers manually, rebooted. I installed odin 1.85 (and later 1.3) and downloaded my contry's stock firmware (and later a newer version of the same firmware and another country's stock) from sammobile. I tried to flash them first without "repartition" ticked, later with it ticked but without a pit file (i can't find it!). I got four different errors, two are attached, the third was somethign like "cant write (line 1876)" and "cant write (line 1440)".I tried three stock firmwares with two version of odin with two USB cords on everal ports on ONE computer. I remove the tablet every time, exited odin every time, run it as admin, disabled firewall, xp-antispy and antivirus. I'm on Windows 7.
Besides a million other threads I found this one, but I wasn't able to solve my issue with it: http://forum.xda-developers.com/showthread.php?t=1652398
For 48 hours i tried to solve this problem by myself. Now I hope to find out if there's a point in continuing or if I can give up and throw away the piece of samsung.
Cheers,
404

android404 said:
Hi,
I rooted my brandnew GT-P3110
404
Click to expand...
Click to collapse
Try odin 1.61 1.85 sometimes itll jar it loose

vizionforever said:
Try odin 1.61 1.85 sometimes itll jar it loose
Click to expand...
Click to collapse
I am having the same problem with a P5113. Started with stuck at the Samsung logo. Then I tried a flash from Odin that didn't work. That led to the "Firmware error" screen telling me to use Keis. Keis fails to find the tablet. Odin still sees it but doesn't get a good write.
Now all I get is the battery icon when plugged in but that's it.
Things I have tried:
1) Two versions of Odin
2) Different USB ports
3) Different PC
I also let the device sit over the weekend to completely discharge. Still nothing.
Did you (or anyone else) resolve this issue?

vizionforever said:
Try odin 1.61 1.85 sometimes itll jar it loose
Click to expand...
Click to collapse
Thanks but it didn't work.
wd5gnr said:
I am having the same problem with a P5113. Started with stuck at the Samsung logo. Then I tried a flash from Odin that didn't work. That led to the "Firmware error" screen telling me to use Keis. Keis fails to find the tablet. Odin still sees it but doesn't get a good write.
Now all I get is the battery icon when plugged in but that's it.
Things I have tried:
1) Two versions of Odin
2) Different USB ports
3) Different PC
I also let the device sit over the weekend to completely discharge. Still nothing.
Did you (or anyone else) resolve this issue?
Click to expand...
Click to collapse
Mine is still bricked. Good luck.

facing same problem in my samsung tab 2 p3100 after root

wd5gnr said:
I am having the same problem with a P5113. Started with stuck at the Samsung logo. Then I tried a flash from Odin that didn't work. That led to the "Firmware error" screen telling me to use Keis. Keis fails to find the tablet. Odin still sees it but doesn't get a good write.
Now all I get is the battery icon when plugged in but that's it.
Things I have tried:
1) Two versions of Odin
2) Different USB ports
3) Different PC
I also let the device sit over the weekend to completely discharge. Still nothing.
Did you (or anyone else) resolve this issue?
Click to expand...
Click to collapse
Dude had the same issue on my galaxy S2 and resolved it. I downloaded the
The .pit file for my gt-i9100g (http://data.hu/get/4697903/omap4_all_20110627_emmc.pit)
The stock ROM from sammobile. (http://www.sammobile.com/firmwares/2/)
The JB Bootloader
The stock JB kernel.
Opened odin v1.85.
Then i used the vol down+home+lock keys together to try to open the download mode ( but ended up in the "Firmware error " page) and connected phone to the pc. It shows "Added!" in the message box.
Repartition with the .pit and it will reboot.
Disconnect
Get into download mode and install the bootloader and it should reboot when done. Disconnect.
Get into download mode and connect
Installed the kernel through odin and reboot
Download mode again and install the ROM through odin.
If the phone gets stuck in boot loop (samsung logo over and over),
get into recovery mode ( for s2, vol up+home+lock, it needs to be pressed intermittently)
Then do a full format along with wipe cache.
And then the phone finally booted completely. :laugh: . Good Luck.
Note: I'm not sure to boot into recovery and download are the same key combos as it was for the i9100g.

novjean said:
Dude had the same issue on my galaxy S2 and resolved it. I downloaded the
The .pit file for my gt-i9100g (http://data.hu/get/4697903/omap4_all_20110627_emmc.pit)
Click to expand...
Click to collapse
Thanks. Well, I understand the theory. I have had trouble finding a PIT file that I am sure is for my device. I did save a PIT file but I think it is corrupt because using it requires me to let the battery die afterwards to get back to download mode. Same for the bootloader. I have a few things I've tried, but not sure I have one that is exactly for the GT-P5113 (in fact, I never did find a JB for the 5113 just the 5110 and it never would load).

Well no amount of coaxing has put life back into the tab
I may try again out of curiosity, but rather than invest more time I went out and bought a 32G Nexus 7 (2013 version). I would still like to get the Galaxy Tab alive again -- it has corrupted the flash twice before and each time I was able to bring it back to life. Not sure if this is an actual hardware failure or if it is just beyond partitioning.
I have a feeling if I had the right PIT and the right bootloader I could get back in business.

I can do each thing you mentioned, but my device is not getting detected by my PC. When I insert USB it says USB not recognized and it is not detected by Odin, adb and anything else. I am stuck on Boot Logo for my P3100 and when I go into recovery, it says USB not recognized. Fully messed up. Can you help me out here.
novjean said:
Dude had the same issue on my galaxy S2 and resolved it. I downloaded the
The .pit file for my gt-i9100g (http://data.hu/get/4697903/omap4_all_20110627_emmc.pit)
The stock ROM from sammobile. (http://www.sammobile.com/firmwares/2/)
The JB Bootloader
The stock JB kernel.
Opened odin v1.85.
Then i used the vol down+home+lock keys together to try to open the download mode ( but ended up in the "Firmware error " page) and connected phone to the pc. It shows "Added!" in the message box.
Repartition with the .pit and it will reboot.
Disconnect
Get into download mode and install the bootloader and it should reboot when done. Disconnect.
Get into download mode and connect
Installed the kernel through odin and reboot
Download mode again and install the ROM through odin.
If the phone gets stuck in boot loop (samsung logo over and over),
get into recovery mode ( for s2, vol up+home+lock, it needs to be pressed intermittently)
Then do a full format along with wipe cache.
And then the phone finally booted completely. :laugh: . Good Luck.
Note: I'm not sure to boot into recovery and download are the same key combos as it was for the i9100g.
Click to expand...
Click to collapse

2 years later .... did you ever unbrick this? I'm dealing with a P5113 now that's stuck at the "Firmware upgrade encountered an issue" screen. <sigh>
wd5gnr said:
Well no amount of coaxing has put life back into the tab
I may try again out of curiosity, but rather than invest more time I went out and bought a 32G Nexus 7 (2013 version). I would still like to get the Galaxy Tab alive again -- it has corrupted the flash twice before and each time I was able to bring it back to life. Not sure if this is an actual hardware failure or if it is just beyond partitioning.
I have a feeling if I had the right PIT and the right bootloader I could get back in business.
Click to expand...
Click to collapse

No. I finally sent it to one of these ebay guys who will JTAG it since I was too lazy to wire up one of my JTAG probes. They worked on it and said it was simply dead and the only alternative would be to replace the flash chips.
Bought a Nexus 7.

I've got the pit files for P311x and P3100 on my website https://sites.google.com/site/jrc2swebsite/downloads/samsung-galaxy-tab-2-70-p31xx

[Q] Bricked Tablet - see post for details

Here is the sequence of events:
Galaxy tab 2 10.1 with factory rom (wife's tablet)
Wife tells me that she keeps trying to complete the update everytime she gets prompted, but it always fails
Wife also tells me that she can't power off the tablet (she presses the power button, it shuts down, but then it starts up again)
I try the upgrade, get same result as wife
I try to reset the rom: I download what I think is the correct file, download Odin 1.85, and run it.
put tablet into download mode, attempt to use Odin to load new rom ***note, this is probably where I screwed up, as I am not sure i used the correct file. This is the file I used: PDA_HC31_EG01Ba_AP352081user_CP1033580_LTE20110704_0708.tar, which I found in a search on xda forums for my problem.
Odin reported failure. I tried again, same result.
I tried using KIES, using the Firmware upgrade and intitialisation (note that I must have UK version of KIEs, based on the spelling of initialisation--maybe that's a problem??/). I put in the model number, then the serial number if the tablet, get a message that GT-P5113 does not support initializing
tablet displays the message: Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
I try to put tablet back into download mode, but that doesn't work. Any suggestions on what to do at this point? Appreciate a step-by-step solution, if possible.
Thanks!

kevinkohut said:
Here is the sequence of events:
Galaxy tab 2 10.1 with factory rom (wife's tablet)
Wife tells me that she keeps trying to complete the update everytime she gets prompted, but it always fails
Wife also tells me that she can't power off the tablet (she presses the power button, it shuts down, but then it starts up again)
I try the upgrade, get same result as wife
I try to reset the rom: I download what I think is the correct file, download Odin 1.85, and run it.
put tablet into download mode, attempt to use Odin to load new rom ***note, this is probably where I screwed up, as I am not sure i used the correct file. This is the file I used: PDA_HC31_EG01Ba_AP352081user_CP1033580_LTE20110704_0708.tar, which I found in a search on xda forums for my problem.
Odin reported failure. I tried again, same result.
I tried using KIES, using the Firmware upgrade and intitialisation (note that I must have UK version of KIEs, based on the spelling of initialisation--maybe that's a problem??/). I put in the model number, then the serial number if the tablet, get a message that GT-P5113 does not support initializing
tablet displays the message: Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
I try to put tablet back into download mode, but that doesn't work. Any suggestions on what to do at this point? Appreciate a step-by-step solution, if possible.
Thanks!
Click to expand...
Click to collapse
Seems you flashed a wrong file.
Download another rom from http://live.samsung-updates.com/
and reflash with odin
Last week i tried to update my tab from 4.1.2 to 4.2.2 it hangup while flashing. Had to reset but then end up with firmware upgrade encountered blablabla. I just reflash within the blind screen without download mode and got it to work again

But don't I need to get the tablet into download mode first?
Rosli59564 said:
Seems you flashed a wrong file.
Download another rom from <<url.....>>
and reflash with odin
Click to expand...
Click to collapse
That makes sense, but how do I get the correct file to the tablet if I can't get the tablet into download mode?

kevinkohut said:
That makes sense, but how do I get the correct file to the tablet if I can't get the tablet into download mode?
Click to expand...
Click to collapse
If it's really a gt-p5113 then find the 1 for your country. If you're not sure your region code/csc then just download for any region.
You will know what i'm talking about if take a look at the given link

Please look at item 10 on my list
Rosli59564 said:
If it's really a gt-p5113 then find the 1 for your country. If you're not sure your region code/csc then just download for any region.
You will know what i'm talking about if take a look at the given link
Click to expand...
Click to collapse
I can't load ANY file to the tablet, as I CANNOT GET IT INTO DOWNLOAD MODE. I need to know how to force the tablet into download mode. Pressing POWER and VOLUME DOWN does not work. NOTHING HAPPENS.

Connect to PC on the screen "firmware upgrade encountered blablabl" Downloadmode on in Background, Odin can get access
If you are working with Odin, please kil ALL Samsung and KIES Programs and Services running in Background.

Hi for go to download mode you have to press power and volume up buttons
Sent from my GT-P5113 using XDA Premium 4 mobile app

Android-Andi said:
Connect to PC on the screen "firmware upgrade encountered blablabl" Downloadmode on in Background, Odin can get access
If you are working with Odin, please kil ALL Samsung and KIES Programs and Services running in Background.
Click to expand...
Click to collapse
I have tried this many times and Odin just fails. TWRP, CWM, Phil's touch all tried and failed. I have tried so many ROMs not sure I could list 'em all. Wanted to try SlimKat. But have this same problem, can't find the handle now, I only get the firmware upgrade encountered blah, blah. I'm just about ready to make confetti out of it! Can I get assistance with this problem, please. I don't care what ROM I have to run, I just need it to work...

Any solution to your problem?
Pp.

PanchoPlanet said:
Any solution to your problem?
Pp.
Click to expand...
Click to collapse
None as yet, I'm running out of real estate to search...

The rom you used in your op was probably for a data tab like sprint, att, Verizon, that is usually a brick result.
If you could factory reset you may have a chance but I doubt it without recovery or download mode.
Pp

You are faceing the "black screen of death" ("Firmware upgrade encountered an issue....").
Uninstall kies and reboot your pc.
Start odin.
Connect the tab running the black screen of death (BSOD).
Download mode running in background of BSOD so odin will detect your device.
Flash the correct firmware now and pray flashing the at&t rom didn't caused a hardbrick.
Send from OnePlus One using Tapatalk

Correct rom
I think that is exactly my problem. Last night I got Odin to run all the way through, it said pass but still no soap. I'm just about to list it for parts and at least minimize my loss.

[Q] Am I bricked err?

I got my GNP 12.2 (SM-P900) a few weeks ago and just tried to root it using Odin and download.chainfire.eu/384/CF-Root/CF-Auto-Root/CF-Auto-Root-v1awifi-v1awifixx-smp900.zip
However it paused at cache.img and after 10 minutes or so it just failed.
I've tried it a few times, but same thing, and on start up all I get is "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
I tried Kies 3 and Kies 2.6 but they both say my device is not supported, even if I try to go into Tools and do it it says the model name is incorrect and doesn't even give me an option to enter the serial number :-\
I looked around for a stock ROM but the closest I could find was the P901 and P905 (But I am the P900)
I don't really know what to do, so any advice would be much appreciated :angel:

Actually got Kies working, was just entering the model # wrong
This could probably be deleted / etc, not really sure how to do that

jns20 said:
Actually got Kies working, was just entering the model # wrong
This could probably be deleted / etc, not really sure how to do that
Click to expand...
Click to collapse
bump?
I'm having the same exact issue. I can get it into download mode. I've tried Kies several times and it keeps failing. Originally, I was using odin 3.07 to auto root on the sm-p900. During the process, the screen got this weird rainbow pixelated look, and odin told me the process has failed. It is now stuck on the error message "Firmware update has encountered an issue..."
Now I'm not really sure what to do. I've tried to reboot from download mode, and that sends me right back to the error message.
Any ideas?

ChampagneFerret said:
bump?
I'm having the same exact issue. I can get it into download mode. I've tried Kies several times and it keeps failing. Originally, I was using odin 3.07 to auto root on the sm-p900. During the process, the screen got this weird rainbow pixelated look, and odin told me the process has failed. It is now stuck on the error message "Firmware update has encountered an issue..."
Now I'm not really sure what to do. I've tried to reboot from download mode, and that sends me right back to the error message.
Any ideas?
Click to expand...
Click to collapse
IIRC you need to reflash recovery and you should be able to boot up again.

muzzy996 said:
IIRC you need to reflash recovery and you should be able to boot up again.
Click to expand...
Click to collapse
I'm sorry if I sound stupid but how do I reflash the recovery? I keep searching for a recovery ROM but I can't find anything, so I must be misunderstanding something here.

ChampagneFerret said:
I'm sorry if I sound stupid but how do I reflash the recovery? I keep searching for a recovery ROM but I can't find anything, so I must be misunderstanding something here.
Click to expand...
Click to collapse
TWRP 2.7.0.0 is available now! http://forum.xda-developers.com/showthread.php?t=2706982 :good:

icem237 said:
TWRP 2.7.0.0 is available now! http://forum.xda-developers.com/showthread.php?t=2706982 :good:
Click to expand...
Click to collapse
Thank you very much. In case anyone else is wondering. I ended up asking the problem with Samsung kies, using the upgrade feature rather than emergency recovery. Wiped all my data but u have my tablet back.
Kind of wondering what went wrong with the root attempt. I followed the instructions to the T.

ChampagneFerret said:
Kind of wondering what went wrong with the root attempt. I followed the instructions to the T.
Click to expand...
Click to collapse
Did you use Odin 3.0.7 or 3.0.9? 3.0.7 is included with CF and MUST be used even though 3.0.9 is the latest. If odin was already installed on your PC and you used 3.0.9 bad things are going to happen.

ChampagneFerret said:
Thank you very much. In case anyone else is wondering. I ended up asking the problem with Samsung kies, using the upgrade feature rather than emergency recovery. Wiped all my data but u have my tablet back.
Kind of wondering what went wrong with the root attempt. I followed the instructions to the T.
Click to expand...
Click to collapse
I myself have tried odin 3.07 and .09 and mine just hangs when cache is being written to. A full green bar but will not move pass the cache portion of the install.

icem237 said:
I myself have tried odin 3.07 and .09 and mine just hangs when cache is being written to. A full green bar but will not move pass the cache portion of the install.
Click to expand...
Click to collapse
I tried both as well, and that's exactly what happened to me. During the process, my screen went all screwy and that's when it told me the process had failed.

I had some of the problems mentioned above. My attempt to flash CF-Auto-Root-v1awifi-v1awifixx-smp900.tar.md5 failed using Odin3-v3.07.exe.
It tries for several minutes and then says failed.
I then used Kies (not Kies 3) to reflash the tablet to factory settings. Here its important to know that Kies will never "connect" you have to ignore that and go to tools and "firmware upgrade and initialization". Google "Firmware upgrade encountered an issue” – Got This Error While", the first result on "droidviews" is the guide i used to fix this.
I then went into the settings and enabled "USB Debugging". Something i had forgotten before. I tried to flash the root file again, but it still failed.
Given that i was able to reflash the firmware with kies, i would say my USB port / cable / drivers must all be good.
What else should i try?

Flash Stock Recovery
davschm said:
I had some of the problems mentioned above. My attempt to flash CF-Auto-Root-v1awifi-v1awifixx-smp900.tar.md5 failed using Odin3-v3.07.exe.
It tries for several minutes and then says failed.
I then used Kies (not Kies 3) to reflash the tablet to factory settings. Here its important to know that Kies will never "connect" you have to ignore that and go to tools and "firmware upgrade and initialization". Google "Firmware upgrade encountered an issue” – Got This Error While", the first result on "droidviews" is the guide i used to fix this.
I then went into the settings and enabled "USB Debugging". Something i had forgotten before. I tried to flash the root file again, but it still failed.
Given that i was able to reflash the firmware with kies, i would say my USB port / cable / drivers must all be good.
What else should i try?
Click to expand...
Click to collapse
For those getting stuck or failing root, Make sure your usb drivers are updated in Kies 3 then flash stock recovery in Odin 3.07. Don't get mixed up with stock firmware (over 1GB) and stock recover (only around 20MB).
Stock recovery is here:
http://download.chainfire.eu/384/CF-Root/CF-Auto-Root/CF-Auto-Root-v1awifi-v1awifixx-smp900.zip
Thread is here:
http://forum.xda-developers.com/showthread.php?p=50492301&nocache=1

Russbad said:
For those getting stuck or failing root, Make sure your usb drivers are updated in Kies 3 then flash stock recovery in Odin 3.07. Don't get mixed up with stock firmware (over 1GB) and stock recover (only around 20MB).
Stock recovery is here:
http://download.chainfire.eu/384/CF-Root/CF-Auto-Root/CF-Auto-Root-v1awifi-v1awifixx-smp900.zip
Thread is here:
http://forum.xda-developers.com/showthread.php?p=50492301&nocache=1
Click to expand...
Click to collapse
Question, what is the purpose of the Stock recovery and CWM recovery?
Also, after trying three times, i was able to get the flash to work. After each failier i used Kies (not kies 3) to flash back to factory. Would these recoveries have helped? Maybe i wouldn't have lost data?

davschm said:
Question, what is the purpose of the Stock recovery and CWM recovery?
Also, after trying three times, i was able to get the flash to work. After each failier i used Kies (not kies 3) to flash back to factory. Would these recoveries have helped? Maybe i wouldn't have lost data?
Click to expand...
Click to collapse
Stock recovery is what your device originally comes with. CWM recovery is a modified version of that and it allows you more functionality.
When I messed up my update and root, my device would not boot up at all. I flashed the stock recovery and that enabled me to successfully root. No data was lost, no factory reset was needed and all my apps and settings were unchanged.

Don't mean to bump this thread, but I'm having the same issue. Odin 3.07 hangs up when it gets to cache.img, and it's non-responsive. I don't care about rooting it, I just want a stock firmware back. I've tried the files that Russbad posted, same issue. Running Note Pro 12. SM-P900 on 4.4.2.

bioncorp said:
Don't mean to bump this thread, but I'm having the same issue. Odin 3.07 hangs up when it gets to cache.img, and it's non-responsive. I don't care about rooting it, I just want a stock firmware back. I've tried the files that Russbad posted, same issue. Running Note Pro 12. SM-P900 on 4.4.2.
Click to expand...
Click to collapse
Try this: With your device unplugged from your PC, open Kies 3, go to tools tab and uninstall the drivers. Then plug your device in and reinstall drivers.
I don't know if it makes a difference but if you get your device to boot up, enable developer options and check USB debugging.
Also make sure you are using the cables that came with your Tablet.
Then flash stock recovery and flash stock firmware.
If it still fails, check that your downloaded firmware and recovery are not corrupted, download them again.
Also try these procedures using different USB ports.
Good luck!

Russbad said:
Try this: With your device unplugged from your PC, open Kies 3, go to tools tab and uninstall the drivers. Then plug your device in and reinstall drivers.
I don't know if it makes a difference but if you get your device to boot up, enable developer options and check USB debugging.
Also make sure you are using the cables that came with your Tablet.
Then flash stock recovery and flash stock firmware.
If it still fails, check that your downloaded firmware and recovery are not corrupted, download them again.
Also try these procedures using different USB ports.
Good luck!
Click to expand...
Click to collapse
I found the issue, it should work with everyone with it. Some people don't have the .md5 extension enabled in their archive viewer, so by simply removing the .md5 (left with CF_XXXX.tar), and flashing that it works 100% fine.

bioncorp said:
I found the issue, it should work with everyone with it. Some people don't have the .md5 extension enabled in their archive viewer, so by simply removing the .md5 (left with CF_XXXX.tar), and flashing that it works 100% fine.
Click to expand...
Click to collapse
I finally got mine rooted by simply trying over and over. I re-downloaded the CF flash tool and used 7zip to extract it several times, and used a different usb port at least once. Not that I really thought there was a problem with my extraction or the download or my USB port. But from what i have seen posted, you just have to try it 3 or 4 (maybe even 10) times until you get lucky and it works.
I did at one point try to recover my Note 12.2 with the "recovery.img" instead of flashing it with a full factory re-image (which causes data loss) but that didn't work for me ether. But I later had good luck with using Odin 3.09 to flash TWRP. So at least I now have a good custom recovery and backup tool.

okay everyone, I'm going to try these methods and report on what happened. Thank you for being so helpful. :cyclops:

ChampagneFerret said:
okay everyone, I'm going to try these methods and report on what happened. Thank you for being so helpful. :cyclops:
Click to expand...
Click to collapse
FINALLY! :laugh: I got it to root!
I ended up using a different computer in the end and used Kies 2.6 for the drivers. I tried this a total of maybe 8 or 9 times, and it worked on the second attempt on the second attempt.
For the record, I left "md5" in the file when rooting, and that's when it worked.