Related
LiquiDuos2 A.I. PIMP my ROM
x
Acer Liquid Gallant Duo E350 (C8)
by Lucky76
(erlucky)
PLEASE READ BEFORE CONTINUING ATTENTAMEMTE FOLLOWING LINES. Thank you.
ATTENTION as always for clarity and do not take any responsibility for any malfunctions BRICK or several of your Acer E350 Liquid Gallant Duo due to the use of the changes, files and guides that I have proposed here, then do these steps at your own risk danger, and I recommend you perform them only after being certain that you understand what you do and you understand the meaning and having read and re-read this post and the various guides that you will find.
Any operating errors could affect the use of your smartphone forcing you to send it in for repair in service.
Flashing is a dangerous action and should be done very carefully.
First custom rom for this new device of Acer with dual sim. I created this rom is a first base for those who want to try their hand at their own customizations and various modding. The changes made are few so this first custom rom stays true to the original graphics as well as to present the app with only the addition of two new (Quick Boot and NofrillCPU). Do not think in exceptional increases the performance of your device, the purpose is to be a base to start working. Of course, this custom rom is already including Root with SuperUser.
Being the first custom rom for this device and one of the few around these devices based mtk65xx I wanted to BETA version for any bugs that may arise.
In the following lines I will try to make a detailed guide to installing a custom rom.
TECHNICAL SECTION
Type Device: Acer Liquid Gallant Duo E350 (C8).
Base Rom Used: OS_Acer_E350_1.000.18 EMEA.FR_A40I_A ---> used files: system.img and boot.img taken from the downloaded zip file.
Acer Rom Date: 25/10/2012
Links Official Acer Rom: Here
Links Official Acer France: Here
System Android: 4.0.3 ICS
INSTALLATION GUIDE
1. Pre Installation (Root, Recovery Mod and Advice)
A. Having the battery to 100%
B. Having a microSD almost 4 gb
C. Read and re-read again carefully review this guide and the guides for the root and recovery.
D. If you have not installed the SuperRecovery with Root passed through this Post and follow the step by step guide of ROOT. Then come back here and go to step E.
E. If you already have or you have just installed the SuperRecovery with Root continue with the installation of ClockworkMod 6.0.2.8 Beta 1 following the guidance found in this Post and then come back here and continue to drive through to step 2.
At this point, the first part is over and you will have your Gallant Duo with the permissions of the new Root and ClockworkMod Recovery installed.
2. Backup (System and Applications)
A. The market download a backup app like Titanium Backup (free) and take a backup of your applications that you have downloaded and installed earlier. Wipe carefully with you also lose all your sms and mms so if you do not want to lose save them with an app that you will surely find the Play Store.
B. Also from the market for those who have problems getting into Recovery with Vol + and Power download Quick Boot (Free).
C. Enter now in recovery using Quick Boot (if downloaded) Recovery choosing the menu for this app otherwise you have to turn off your device and enter the combination of the Vol + and Power.
D. Now you have to do a full backup system for restoring. Use the Volume keys go to the Backup and Restore menu and enter the Power Button.
E. In this sub menu drop down to the line "choose backup format" and confirm by pressing Power now get a line on the choice tar and confirm again with Power. You will set up the compression format. Tar.
F. Confirm that you see now on the first choice and that is "up" with the usual power button. Now just wait until the full backup! your Device (boot.img, recovery.img, System, Data and Cache).
G. Using the Volume keys go to the line + + + + + Go Back + + + + + and press Power.
H. Finally, again by pressing Power up line reboot system now to restart your device.
I. With the device turned on connect it to your PC using the USB cable and you will see the microSD ext (sdcard2) a new folder "ClockworkMod" for further safety advice to copy it to your PC. Else within the full backup of your system and then again get done just before a backup inside your PC.
Now the second point is finished so if you're still not convinced continue with the guide and go to step 3 to flash the custom rom.
3. Installing Custom Rom (Download, Wipe, Flash)
A. Downloaded from the link at the bottom of the page in the section DOWNLOAD my custom rom.
B. Copy it into your microSD
C. Restart your Gallant Duo Recovery with Quick Boot or Off with the usual combination of buttons Vol + and Power
D. First of all we have to do a clean install to make the two Wipe in the recovery. Then go to the line "wipe data / factory reset" and confirm by pressing Power. Do the same with the next choice "wipe cache partion". You will have reported at this point your device to factory state as the first starting of the engine.
E. Finally you are ready to flash your custom rom going on line "install zip from sdcard" and confirm by pressing Power.
F. Again confirmed on the first choice "choose zip from sdcard" with Power.
G. Now you have to choose the file you want to install name_custom_rom.zip. For my custom rom LiquiDuos.zip confirming with the usual Power button.
H. Finally get off the line and confirmed - Yes - Install LiquiDuos.zip. ----> Finally will start the installation.
I. Wait until the installation is finished.
L. Restart your device confirming the line reboot system now.
M. Reset all like the first time. If you synchronize your account you will download the app you previously installed and any updates. Otherwise downloaded from the market or install Titanium Backup and reinstall the app that you had previously saved at the beginning of this guide.
SECTION DOWNLOAD
Link custom rom LiquiDuos 2 A.I. PMR ---> Here
md5sum ---> b2e959c886a9b2c3e50f53f37cfebbc9
Link custom rom LiquiDuos 1 beta ---> Here
md5sum ---> b21f4aa8e8b038a4bf438d7a7f4aa660
SECTION CHANGELOG
LiquiDuos 2 A.I. PMR
1. Installation with Aroma Installer
2. Set your rom
3. Aroma Installer with Pimp my Rom
4. Possibility of choice for memory Internal/External
5. Added Apps from 4.2 JB
6. Altro
Click to expand...
Click to collapse
LiquiDuos 1 beta
1. Added SuperUser for Root
2. Added Busybox
3. De-ODEX files
4. Added function / data / app
5. Added function / etc / init.d
6. Adding app Quick Boot
7. Adding app noFrillCpu
8. Changed ro.secure=0 on Boot
9. Added ADB Boot
Click to expand...
Click to collapse
SECTION BUG SOFTWARE and HARDWARE
SOFTWARE BUG:
BUG HARDWARE:
If you find any bugs please report hardware or software in this post so you will to solve them.
SECTION CREDITS
PaulOBrien ---> For its SuperRecovery with Root. (MoDaCo) ---> Link
Bin4ry ----> for his root method
dsixda ---> For your HTC Android Kitchen 0.220. (XDA) ---> Link
Koush Dutta ---> For its ClockworkMod ---> Link
Tuttoandroid.net ---> To web space and exclusive of my rom ---> Link
XDA Forum
Amarullz ---> For Aroma Installer ---> Link
Androguide.fr ---> Per il loro PIMP my ROM (ver. A.I.) ---> Link
Bye
I'm using it since two days, and it's working well :good:
Thanks
groovyloul said:
I'm using it since two days, and it's working well :good:
Thanks
Click to expand...
Click to collapse
Thank you....
Hello Erlucky,
Can you please post LiquiDuos 2 here to I am not allowed to download in the Italian forum and my registration was not a success due to lack off my Italian.
johnny7556 said:
Hello Erlucky,
Can you please post LiquiDuos 2 here to I am not allowed to download in the Italian forum and my registration was not a success due to lack off my Italian.
Click to expand...
Click to collapse
I did....
I have posted here.
Bye.
is this JB rom?
thanks in advance
hi to all,
I just wanted to say that i have updated my gallant duo to a new version of android (always ICS): the "Acer_AV40I_E350_1.000.23_EMEA.FR"
I think that the this rom should be updated because it is stopped to "Acer_E350_1.000.18 EMEA.FR_A40", i'm not able but if someone could it will be great
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Gionee Elife E3 is a Mobile made by a chinese Handset manufacturer Gionee , It is just 7.9mm thick and has a gorgeous display.
So in this Thread I will be discussing :-
READ AND FOLLOW THE WHOLE PROCEDURE..! ITS IMPORTANT
1. How to Root Gionee Elife E3
2. How to Flash CWM
3. Compatible Roms with Gionee Elife E3
4. How To Flash Custom Roms
5 . Difference Between Indian & Chinese Gionee Elife E3
6. Firmware You should Flash to install Custom Roms
Lets Start With - How to identify which Gionee Elife E3 Firmware You Are Currently Using .
Go into Setting >> System Update and Click on Update Firmware Button . If u notice anything there written in chinese or if u have the button of the System update in a circular Form then your elife e3 has the Chinese Firmware , otherwise u have The Indian Firmware :good:
Ok so now you identified which firmware u have. (Identifying which firmware u have will come in handy later on)
Lets Start Rooting of the Phone
ROOTING OF GIONEE ELIFE E3 (CHINESE AND INDIAN) -
STEPS - GO TO SETTING>> ABOUT PHONE
Repeatedly tap on Build Number (seven taps should do the trick) until you’re met with a message that reads: “you are now a developer!”
GO BACK TO SETTINGS
THEN TAP ON DEVELOPER OPTIONS
TICK MARK THE USB DEBUGGING OPTION
GO BACK TO SETTINGS
TAP ON SECURITY
TICK MARK THE OPTION "UNKNOWN SOURCES" AND CLICK "OK"
TAP THE HOME BUTTON NOW
:good:
INSTALLING THE USB DRIVERS BEFORE ROOTING -
YOU MUST HAVE TO INSTALL THE USB DRIVERS OF THE PHONE BEFORE ROOTING
SO DOWNLOAD THIS TOOL (PDANET)- http://pdanet.co/bin/PdaNetA4126.exe AND FOLLOW THE INSTRUCTIONS
INSTALL PDANET
FOLLOW THE PROCEDURE AND CLICK ON "OTHERS" OPTION IN THE PHONE SELECTION MENU
CONNECT YOUR GIONEE ELIFE E3 WHEN ASKED AND IT WILL AUTOMATICALLY INSTALL ALL DRIVERS :good:
Download MOTOCHOPPER (ROOTING TOOL) here:
http://vulnfactory.org/public/motochopper.zip
Instructions:
Extract the entire contents of the zip file.
Connect your device to your PC via USB. DO NOT TURN ON USB STORAGE ON YOUR GIONEE ELIFE E3...!!!!
If you are using Windows, navigate to the extracted directory and execute "run.bat". If you are using Linux or OS X, navigate to the extracted directory in a terminal and execute "./run.sh".
HIT ENTER
WAIT
Approve the ADB connection from your PC on your device. IF IT ASKS TO DO SO . DO NOT TURN ON USB STORAGE ON YOUR GIONEE ELIFE E3...!!!!
WAIT
HIT ENTER WHEN IT ASKS TO HIT ANY KEY
UR DEVICE WILL NOW REBOOT ON ITS OWN
AFTER REEBOOT YOU HAVE SUPERUSER INSTALLED,,!!
FLASHING THE CWM IF U HAVE INDIAN FIRMWARE -
Install "MOBILE UNCLE TOOL" FROM THE PLAY STORE
DOWNLOAD RECOVERY.IMG FROM PC - http://d-h.st/vcU
CONNECT PHONE TO PC VIA USB AND TURN ON USB STORAGE
COPY RECOVERY.IMG FILE TO THE ROOT OF INTERNAL SD CARD
DISCONNECT THE PHONE FROM PC
GO INTO MOBILE UNCLE TOOLS APP . GRANT IT SUPERUSER PERMISSION FOREVER
TAP ON RECOVERY UPDATE
SELECT THE "RECOVERY.IMG" FILE FROM INTERNAL SD AND FLASH IT
CLICK "OK" AND BOOT INTO RECOVERY "OK"
YOU ARE NOW IN THE CWM (CLOCKWORDMOD RECOVERY) VOLUME UP AND DOWN BUTTONS ACT AS UP AND DOWN (TO NAVIGATE)
AND POWER BUTTON ACT AS THE SELECTION BUTTON
CLICK ON REBOOT DEVICE OR REBOOT
AND THEN CLICK ON "YES" AND THEN "YES"
AFTER REBOOT YOU HAVE FLASHED UP THE CWM .. CONGRATS..! :good:
FLASHING THE CWM IF U HAVE CHINESE FIRMWARE -
CHINESE FIRMWARE'S DO NOT HAVE THE PLAYSTORE SO U WILL HAVE TO DOWNLOAD THE MOBILE UNCLE TOOLS SEPERATELY AND INSTALL THAT TO UR DEVICE , HERE'S THE LINK TO DOWNLOAD MOBILE UNCLE TOOLS - http://d-h.st/9Q8
AFTER U DONE INSTALLING
DOWNLOAD RECOVERY.IMG FROM PC - http://d-h.st/y4X (ITS THE RECOVERY OF BLU LIFE PLAY..IT WILL LATER HELP U FLASH UP ROMS)
CONNECT PHONE TO PC VIA USB AND TURN ON USB STORAGE
COPY RECOVERY.IMG FILE TO THE ROOT OF INTERNAL SD CARD
DISCONNECT THE PHONE FROM PC
GO INTO MOBILE UNCLE TOOLS APP . GRANT IT SUPERUSER PERMISSION FOREVER
TAP ON RECOVERY UPDATE
SELECT THE "RECOVERY.IMG" FILE FROM INTERNAL SD AND FLASH IT
CLICK "OK" AND BOOT INTO RECOVERY "OK"
YOU ARE NOW IN THE CWM (CLOCKWORDMOD RECOVERY) VOLUME UP AND DOWN BUTTONS ACT AS UP AND DOWN (TO NAVIGATE)
AND POWER BUTTON ACT AS THE SELECTION BUTTON
CLICK ON REBOOT DEVICE OR REBOOT
AND THEN CLICK ON "YES" AND THEN "YES"
AFTER REBOOT YOU HAVE FLASHED UP THE CWM .. CONGRATS..! :good:
MAKE A NADROID BACKUP FOR YOUR E3 BEFORE PROCEEDING (INDIAN AND CHINESE BOTH) , HERE'S HOW - http://www.youtube.com/watch?v=36cihz4l-vk
DO NOT RESTORE THIS BACKUP..!! ONLY MAKE A BACKUP
FLASHING UP CUSTOM ROMS AND AVAILABLE CUSTOM ROMS -
AVAILABLE CUSTOM ROMS FOR ELIFE E3 -
INFINITY HD
http://forum.xda-developers.com/showthread.php?p=44023789#post44023789
XPERIA HD
http://forum.xda-developers.com/showthread.php?p=44168616#post44168616
GamerzROM
http://forum.xda-developers.com/showthread.php?p=44168525
NOTE - IF U ARE USING THE INDIAN FIRMWARE .. U WILL NOT BE ABLE TO FLASH UP ROMS CURRENTLY .. SO U NEED TO FLASH UP THE CHINESE FIRMWARE TO YOUR GIONEE ELIFE E3
HERE'S THE CHINESE FIRMWARE -
ORIGINAL FIRMWIRE E3
Go with google translate here - http://www.elife.com/forum-40-3.html
firmwire part 1 : http://d-h.st/shk
firmwire part 2 : http://d-h.st/VEY
firmwire part 3 : http://d-h.st/4tJ
firmwire part 4 : http://d-h.st/ztI
FLAHTOOL (SP FLASH TOOL) : http://d-h.st/GeI
INSTRUCTIONS -
1. EXTRACT THE FIRMWARE ONTO YOUR DESKTOP
2. EXTRACT THE ZIP OF THE SP FLASH TOOL
3. OPEN THE "FLASH_TOOL.EXE" AS AN ADMINISTRATOR
4. CLICK ON SCATTER LOADING
5.BROWSE FOR "MT6589_ANDROID_SCATTER_EMMC.TXT" IN YOUR DOWNLOADED FIRMWARE FOLDER
6.OPEN IT
7. MAKE SURE ALL THE ENTRIES BELOW ARE TICK MARKED
8.THEN CLCK ON FIRMWARE>>UPGRADE (MOBLIE SHOULD NOT BE CONNECTED)
9. REMOVE THE BATTERY FOR FEW SECONDS
10.RE-INSERT IN AND WITHOUT SWITICHING ON THE MOBILE CONNECT IT
11. WAIT FOR THE PROCESS TO COMPLETE
AFTER COMPLETED U WILL SEE A GREEN RING
DISCONNECT THE MOBILE NOW AND BOOT IT UP
NOW U SHOULD FOLLOW THE PROCESS FOR ROOTING AND INSTALLING CWM FOR CHINESE FIRMWARE AND ALSO MAKE A NADROID BAKCUP ..!!!!
FOLLOW IT..!!
NOW ALL OF US HAVE THE CHINESE FIRMWARE .. LETS FLASH SOME CUSTOM ROMS
Download any of these :-
1. iNfinity HD V2: http://d-h.st/7UG
2. XPERIA HD - http://d-h.st/Tsf
3. GAMERZ ROM - https://docs.google.com/file/d/0B_biVoQFUltgQjZwN1NNc3RPZ1k/edit?usp=sharing
BEFORE PROCEEDING MAKE SURE U HAVE A NADROID BACKUP....!!
FOLLOW THIS PROCEDURE FOR FLASHING..!!
1) Download Rom.zip File
2) Put into ROOT OF Internal SD Card
3) Go To CMW Recovery BY PRESSING VOL+ AND POWER BUTTON TOGETHER OR BY MOBILE UNCLE TOOLS
4) Wipe Data/Factory Reset And Wipe Partition
5) From Advance Menu Do Dalvik Catch Clear
6) Go in Mount And Storage select FORMAT SYSTEM
7) Select Intall From SD and Select File And Click YES
8) Select YOUR ROM ZIP FILE And Select YES
9) Reboot Your System
10) Enjoy
IF U ARE STUCK IN A BOOT LOOP -
RESTORE THE NADROID BACKUP ..!!
THANKS...!!
CREDITS -
lalibm
trip007in
4peace1
sankhauaa
bhargav1991
lopestom
burakgon
AND ME (thegadgetnerd)
IT WORKS IF YOU FOLLOW THE CORRECT PROCEDURE..!!
READ THE WHOLE CAREFULLY...!!
DO IT AT YOUR OWN RISK I AM NOT RESPONSIBLE FOR ANY SORT OF DAMAGE
THANKS AGAIN...!!
on point bro but gamerz not work on e3 for now or did i missed something
Gamerz rom worked !!!
4peace1 said:
on point bro but gamerz not work on e3 for now or did i missed something
Click to expand...
Click to collapse
There are 2 versions of gamerz rom , to let it work , we have to install the General mobile discovery version . Currently i have gamerz rom installed on my e3 , i have provided the link of gamerz rom of general mobile discovery only
Thanks
thegadgetnerd said:
There are 2 versions of gamerz rom , to let it work , we have to install the General mobile discovery version . Currently i have gamerz rom installed on my e3 , i have provided the link of gamerz rom of general mobile discovery only
Thanks
Click to expand...
Click to collapse
ok let me try it this
i tried wrong one be that -v1.0 for Xolo Q800/Fly IQ446/Gionee gn708w/Symphony w125
U have to try the GENERAL MOBILE DISCOVERY VERSION
4peace1 said:
ok let me try it this
i tried wrong one be that -v1.0 for Xolo Q800/Fly IQ446/Gionee gn708w/Symphony w125
Click to expand...
Click to collapse
TRY THE GENERAL MOBILE DISCOVERY VERSION AND DOWNLOAD THE ROM AS IT IS .. DO NOT CHANGE ANY OF THE FILE'S LIKE BOOT.IMG.. !!
The General Mobile discovery one works and i have it installed on my Gionee Elife E3
Thanks
nice one but no selection of 3g on sim 2,no wifi setting
Follow
Galaxy Nexus cihazımdan Tapatalk 2 ile gönderildi
sir here you have given chinese firmware may i know which version of chinese firmware is this??? 1.2, 1.8 or 1.10(latest)
thank you
ok got it this is fw 1.2 we have to update after this
can anyone suggest which google apps package i should use to install google services in official chinese firmware posted here???
official google apps from goo.im doesnt seems to work properly it gives 492 error in play store
Just update it and install Google play store only
wont it need xml files and extra login service apk to installed in system???
milav said:
wont it need xml files and extra login service apk to installed in system???
Click to expand...
Click to collapse
Nope
from update sv1.8 all files to make Gapps works are there
just need to install apk of playstore,gmail etc
Sv1.0 old didnt have any Gapps installation files.
nandroid backup of chinese roms
can anyone upload chinese nandroid backup of their mobile so that it will be easy to flash custom roms
sheraz1015 said:
can anyone upload chinese nandroid backup of their mobile so that it will be easy to flash custom roms
Click to expand...
Click to collapse
Even I am also looking for Same...
help
can anyone help me and my friend Gavrav
sheraz1015 said:
can anyone help me and my friend Gavrav
Click to expand...
Click to collapse
@sheraz1015 milav is going to upload check this
thanx gavrav
Gauraav said:
@sheraz1015 milav is going to upload check this
Click to expand...
Click to collapse
thanx gavav
hi guys
can i install walkman music players app. without flasing custom roms..
i already rooted my phone and successfully install super user app. from step mentioned in 1st post...
i also download the xperia HD custom rom and try to install music player app but it fails??
any one plz help
ershibbu said:
hi guys
can i install walkman music players app. without flasing custom roms..
i already rooted my phone and successfully install super user app. from step mentioned in 1st post...
i also download the xperia HD custom rom and try to install music player app but it fails??
any one plz help
Click to expand...
Click to collapse
Did you flashed xperia HD ? For only music player I think you don't need root . I have also E3 , rooted stock and I am using almost all ported system apps including latest KitKat launcher , mail, camera ...without any problem. I always prefer manual system push rather that flash through cwm .I still in stock cwm.
Assalam O Alikum,
Hello,
Here after long mind game Alhamdulillah I m sucessfully port CWM Recovery in Z4, Here I M presenting you Root method and CWM Recovery for Qmobile Noir Quatro Z4. CWM Recovery, I was flash via SP-Flash Tool. Both are working perfectly at my device.
How To Root Your Device:
1) Download Framaroot rooting application.
2) Install it on your Quatro Z4 phone.
3) Open the app & select “Install super su” from the drop down menu.
4) Then click on Borimor button.
5) You will get a success message “Success Superuser & su binary installed. You have to reboot your device.
6) Press OK. & Restart your phone. :good:
How to Flash CWM Recovery:
This steps should be done after rooting.
1) Download the CWM Recovery file. (downloading should be done from pc as android default browser may not allow downloading .img file. Or use any third party browser like Dolphin, UC etc.)
2) When the download completes connect your phone to pc, turn on USB mass storage & copy the downlaoded recovery.img file to your phone.
3) Now download this Mobile Uncle Tools app.
4) After installing the Mobile Uncle tools apps, open it.
5) Select Recovery Update option & then TAP the recovery.img option on next screen.
6) After that choose Reboot to Recovery.
7) Your phone will now reboot into recovery mode, use Volume UP & down keys to navigate in recovery mode & Power button to select.
8) In recovery mode, navigate to Reboot System Now (probably this first option) & press the Power button. Select YES to confirm it. now your phone will again bootup in normal mode. :good::good::good:
Congo, you have successfully rooted Qmobile Noir Quatro Z4 & installed the CWM Custom Recovery on it. Go & enjoy some rooted apps & games from play store.Make sure to subscribe us bellow or follow me social networks to stay updated with Qmobile Noir Quatro Z4 development.
Framaroot 1.7.0:
Code:
http://d-h.st/eqr
Mobileuncle MTK Tools v2.9.5:
Code:
http://d-h.st/5Oi
CWM Recovery:
Code:
http://d-h.st/vNd
Remember One Thing DO AT YOUR OWN RISK, I M NOT RESPONSIBLE FOR ANY KIND OF BOOT LOOP OR BRICK.
thnx ..do u have orginal recovery.img in case of emergency?
Sent from my Z4 using xda app-developers app
Has any one of u tried miui rom ported for noir z4..........if yes did u find any lag plz reply its urgent .......decisive role for me to whether buy it or not....plz.....here u go. http://en.miui.com/thread-12119-1-1.html
Sent from my A2_Classic using Tapatalk 2
mobile uncle doesnt pick recovery.img from sdcard, i have put recovery.img in parent directory of sdcard0, what to do now
actually u missed one step, recovery file should be rename by recovery.img ever with capital R, mobile uncle doesnt pick
cmw recovery not sported in my z4 q mobile what i do..
Plzz give a way to root qmobile s4...
Hey bro...
I have bought QMobile s4 but i cannot find any way to root it or flash any recovery to it...plzz give any recovery or working root method....
Many Many Thanks
Hope u will do this sooon..
Custom Rom for Alcatel T’POP
Custom Rom for Alcatel Onetouch (OT) T’pop
Custom Rom for Alcatel T’pop have been very elusive. Searching it online can be very frustrating but you don’t have to worry any more. This rom is Cynogenmod (Xperia Z) rom modded to work with Alcatel Onetouch (OT) T’Pop (4010A, 4010X, 4010D, 4010E) also known in some regions as Alcatel Glory 2S. This Custom Rom has been modded to use m2sd which increases alcatel t’pop internal memory by using the sd card to store Apps.
I wrote this article to guide you through the installation methods, but first you have to have your phone rooted and CWM recovery installed.
How to Root Alcatel (OT) T’pop
To root your Alcatel T’pop you must have a pc running Windows. Since Window does not have Alcatel drivers, download them from here.. After download execute the file and reboot your pc if necessary.
The next step is to install Ishuaji root. download from this link
The next step is to turn ON the USB debugging option on your device opening Menu > Settings > Applications > Development > USB debugging.
Open Ishuaji.
Plug in your device to your PC using the USB cable.
5. Now hit that little green button which appears in the bottom-right corner of the app.
6. It should start rooting your device.
7. You should now be rooted! Excellent! Your device’s been successfully rooted and you’re all set to enjoy the customization of your android.
Installing CWM
Download Cwm from here (link below)
Extract the archive which contains two files (mobile uncle tools.apk and recovery.img) . Install mobile uncle and make sure to move recovery.img to the root of your sd card.
open the mobile uncle application and grant it superuser permissions. Just press the left option (that is the “allow button”.
Click continue then choose “flash recovery from sd card”. Choose recovery.img. Well-done you now have cwm 5 installed on your phone.
Removing Chinese Super User
Download Super User (google for it/playstore/or use the forum)
Switch off your phone.
Press the volume up button and the power on button until the phone enters recovery mode.
Select “Install Zip From Sd Card” option and go to the downloaded super user.zip. Thats All.
INSTALLING XPERIA Z MOD FOR ALCATEL T’POP
Now that you have a rooted phone and CWM recovery installed lets play with custom roms. To install a custom rom is simple but sometime things can go wrong. First you have to save your current rom. Switch off your phone and Press the Volume Up and Power button to enter recover mode. Select Backup and Restore, then Backup and wait for CWM to backup your current ROM which can be used to restore your phone to an earlier state.
Download the Xperia Z custom rom for Alcatel T’pop from here(link below)
Extract the RAR archive which contains XPERIA ROM MOD BY VIKTOR DOMINGUEZ.zip and a Folder named RESTORE containing other files. Create a Folder with the name clockworkmod in root of your sd card if its not yet available. Open the folder and create another named backup.
Copy the Restore folder you extracted to clockworkmod>backup.
Copy XPERIA ROM MOD BY VIKTOR DOMINGUEZ.zip to the root of your sd card, do not extract the zip file.
Installation
Switch off your phone.
Press volume up and power buttons at the same time until you enter recovery mode.
Do the following first -Wipe data/factory reset -Wipe cache partition if any
Select the option INSTALL ZIP FROM SDCARD. Select XPERIA ROM MOD BY VIKTOR DOMINGUEZ.zip.
Install the zip
When complete select go back until you find the option BACKUP AND RESTORE.
Select Restore and select Restore/ .Wait until the operation is complete and reboot your system.
THATS ALL. ENJOY YOUR CUSTOM ANDROID. (STAY TUNED FOR OTHER CUSTOM ROMS)
HERE IS ANOTHER CUSTOM ROM I UPLOADED FOR ALCATEL T’POP(4010A, 4010X, 4010D, 4010E ). THIS MOD CAN BE USED AS STOCK ROM.
The installation is the same as shown above
download mutacion.zip from here(link below)
save the zip in root of sd card.
download Restaurar folder from here (link below)
copy/move it to /clockworkmod>backup
reboot your phone to recovery mode and wipe ALL cache , Wipe data/factory reset .
the next step is to install mutacion.zip. procedure is shown above.
still in recovery mode, go to backup and restore and restore your device with the files you downloaded shown as /Restaurar
reboot your device and enjoy.
Someone please confirm if this thing works
Its
bumjrah said:
Someone please confirm if this thing works
Click to expand...
Click to collapse
Check out.
http : // ngashsk.blogspot.com/p/alcatel (dot) html
Av tried it but its not working well with 4010D as only one simcard being detected
Link Below?
loxdon said:
Custom Rom for Alcatel T’POP
Custom Rom for Alcatel Onetouch (OT) T’pop
Custom Rom for Alcatel T’pop have been very elusive. Searching it online can be very frustrating but you don’t have to worry any more. This rom is Cynogenmod (Xperia Z) rom modded to work with Alcatel Onetouch (OT) T’Pop (4010A, 4010X, 4010D, 4010E) also known in some regions as Alcatel Glory 2S. This Custom Rom has been modded to use m2sd which increases alcatel t’pop internal memory by using the sd card to store Apps.
I wrote this article to guide you through the installation methods, but first you have to have your phone rooted and CWM recovery installed.
How to Root Alcatel (OT) T’pop
To root your Alcatel T’pop you must have a pc running Windows. Since Window does not have Alcatel drivers, download them from here.. After download execute the file and reboot your pc if necessary.
The next step is to install Ishuaji root. download from this link
The next step is to turn ON the USB debugging option on your device opening Menu > Settings > Applications > Development > USB debugging.
Open Ishuaji.
Plug in your device to your PC using the USB cable.
5. Now hit that little green button which appears in the bottom-right corner of the app.
6. It should start rooting your device.
7. You should now be rooted! Excellent! Your device’s been successfully rooted and you’re all set to enjoy the customization of your android.
Installing CWM
Download Cwm from here (link below)
Extract the archive which contains two files (mobile uncle tools.apk and recovery.img) . Install mobile uncle and make sure to move recovery.img to the root of your sd card.
open the mobile uncle application and grant it superuser permissions. Just press the left option (that is the “allow button”.
Click continue then choose “flash recovery from sd card”. Choose recovery.img. Well-done you now have cwm 5 installed on your phone.
Removing Chinese Super User
Download Super User (google for it/playstore/or use the forum)
Switch off your phone.
Press the volume up button and the power on button until the phone enters recovery mode.
Select “Install Zip From Sd Card” option and go to the downloaded super user.zip. Thats All.
INSTALLING XPERIA Z MOD FOR ALCATEL T’POP
Now that you have a rooted phone and CWM recovery installed lets play with custom roms. To install a custom rom is simple but sometime things can go wrong. First you have to save your current rom. Switch off your phone and Press the Volume Up and Power button to enter recover mode. Select Backup and Restore, then Backup and wait for CWM to backup your current ROM which can be used to restore your phone to an earlier state.
Download the Xperia Z custom rom for Alcatel T’pop from here(link below)
Extract the RAR archive which contains XPERIA ROM MOD BY VIKTOR DOMINGUEZ.zip and a Folder named RESTORE containing other files. Create a Folder with the name clockworkmod in root of your sd card if its not yet available. Open the folder and create another named backup.
Copy the Restore folder you extracted to clockworkmod>backup.
Copy XPERIA ROM MOD BY VIKTOR DOMINGUEZ.zip to the root of your sd card, do not extract the zip file.
Installation
Switch off your phone.
Press volume up and power buttons at the same time until you enter recovery mode.
Do the following first -Wipe data/factory reset -Wipe cache partition if any
Select the option INSTALL ZIP FROM SDCARD. Select XPERIA ROM MOD BY VIKTOR DOMINGUEZ.zip.
Install the zip
When complete select go back until you find the option BACKUP AND RESTORE.
Select Restore and select Restore/ .Wait until the operation is complete and reboot your system.
THATS ALL. ENJOY YOUR CUSTOM ANDROID. (STAY TUNED FOR OTHER CUSTOM ROMS)
HERE IS ANOTHER CUSTOM ROM I UPLOADED FOR ALCATEL T’POP(4010A, 4010X, 4010D, 4010E ). THIS MOD CAN BE USED AS STOCK ROM.
The installation is the same as shown above
download mutacion.zip from here(link below)
save the zip in root of sd card.
download Restaurar folder from here (link below)
copy/move it to /clockworkmod>backup
reboot your phone to recovery mode and wipe ALL cache , Wipe data/factory reset .
the next step is to install mutacion.zip. procedure is shown above.
still in recovery mode, go to backup and restore and restore your device with the files you downloaded shown as /Restaurar
reboot your device and enjoy.
Click to expand...
Click to collapse
Can anyone verify if the files dowload links are removed, or it´s just me that I don´t find them?
1
:22
working for sure
just visit mutaanto(dot)wordpress(dot)com....u will find the zerostorm rom for alcatel 4010x..working perfectly
http://www.mediafire.com/download/djg7n8ukahdac45/Custom_Gingerx_katv2_by_DrunkenLizard.rar
Rom for the 4010X not D, X!!
Normal flashing instructions, full wipes, install, flash enclosed CWM backup, flash a few zips..etc... included in the readme file. Not my rom, found it here: http://www.youtube.com/watch?v=Kere5VobLC0 and not my phone, so risked it. Works great and better than the xperia rom and stock anyway. Still need root uninstaller as bloat even on this one. After bloatware removal, there is maybe 130meg left ish, in system memory...
robneymcplum said:
http://www.mediafire.com/download/djg7n8ukahdac45/Custom_Gingerx_katv2_by_DrunkenLizard.rar
Rom for the 4010X not D, X!!
Normal flashing instructions, full wipes, install, flash enclosed CWM backup, flash a few zips..etc... included in the readme file. Not my rom, found it here: http://www.youtube.com/watch?v=Kere5VobLC0 and not my phone, so risked it. Works great and better than the xperia rom and stock anyway. Still need root uninstaller as bloat even on this one. After bloatware removal, there is maybe 130meg left ish, in system memory...
Click to expand...
Click to collapse
I need some help.
Did you had clockworkmod installed on the phone? If so, how did you installed it? Since the recovery.img way didn't work for me...The phone restarted, but no cwm at all...
Or you installed it without cwm?
Thanks in advance!
wex28 said:
I need some help.
Did you had clockworkmod installed on the phone? If so, how did you installed it? Since the recovery.img way didn't work for me...The phone restarted, but no cwm at all...
Or you installed it without cwm?
Thanks in advance!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2320583
alcatel one touch 4010x
hi guy i am trying to flash recovery into my alcatel one touch 4010x using sp flash tool now i tells me that my phone does not have a bootloader..
the phone wont boot to recovery..
it says download bootloader..
does anyone have a fix for this?
help!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
worked for me.
loxdon said:
Custom Rom for Alcatel T’POP
Custom Rom for Alcatel Onetouch (OT) T’pop
Custom Rom for Alcatel T’pop have been very elusive. Searching it online can be very frustrating but you don’t have to worry any more. This rom is Cynogenmod (Xperia Z) rom modded to work with Alcatel Onetouch (OT) T’Pop (4010A, 4010X, 4010D, 4010E) also known in some regions as Alcatel Glory 2S. This Custom Rom has been modded to use m2sd which increases alcatel t’pop internal memory by using the sd card to store Apps.
I wrote this article to guide you through the installation methods, but first you have to have your phone rooted and CWM recovery installed.
How to Root Alcatel (OT) T’pop
To root your Alcatel T’pop you must have a pc running Windows. Since Window does not have Alcatel drivers, download them from here.. After download execute the file and reboot your pc if necessary.
The next step is to install Ishuaji root. download from this link
The next step is to turn ON the USB debugging option on your device opening Menu > Settings > Applications > Development > USB debugging.
Open Ishuaji.
Plug in your device to your PC using the USB cable.
5. Now hit that little green button which appears in the bottom-right corner of the app.
6. It should start rooting your device.
7. You should now be rooted! Excellent! Your device’s been successfully rooted and you’re all set to enjoy the customization of your android.
Installing CWM
Download Cwm from here (link below)
Extract the archive which contains two files (mobile uncle tools.apk and recovery.img) . Install mobile uncle and make sure to move recovery.img to the root of your sd card.
open the mobile uncle application and grant it superuser permissions. Just press the left option (that is the “allow button”.
Click continue then choose “flash recovery from sd card”. Choose recovery.img. Well-done you now have cwm 5 installed on your phone.
Removing Chinese Super User
Download Super User (google for it/playstore/or use the forum)
Switch off your phone.
Press the volume up button and the power on button until the phone enters recovery mode.
Select “Install Zip From Sd Card” option and go to the downloaded super user.zip. Thats All.
INSTALLING XPERIA Z MOD FOR ALCATEL T’POP
Now that you have a rooted phone and CWM recovery installed lets play with custom roms. To install a custom rom is simple but sometime things can go wrong. First you have to save your current rom. Switch off your phone and Press the Volume Up and Power button to enter recover mode. Select Backup and Restore, then Backup and wait for CWM to backup your current ROM which can be used to restore your phone to an earlier state.
Download the Xperia Z custom rom for Alcatel T’pop from here(link below)
Extract the RAR archive which contains XPERIA ROM MOD BY VIKTOR DOMINGUEZ.zip and a Folder named RESTORE containing other files. Create a Folder with the name clockworkmod in root of your sd card if its not yet available. Open the folder and create another named backup.
Copy the Restore folder you extracted to clockworkmod>backup.
Copy XPERIA ROM MOD BY VIKTOR DOMINGUEZ.zip to the root of your sd card, do not extract the zip file.
Installation
Switch off your phone.
Press volume up and power buttons at the same time until you enter recovery mode.
Do the following first -Wipe data/factory reset -Wipe cache partition if any
Select the option INSTALL ZIP FROM SDCARD. Select XPERIA ROM MOD BY VIKTOR DOMINGUEZ.zip.
Install the zip
When complete select go back until you find the option BACKUP AND RESTORE.
Select Restore and select Restore/ .Wait until the operation is complete and reboot your system.
THATS ALL. ENJOY YOUR CUSTOM ANDROID. (STAY TUNED FOR OTHER CUSTOM ROMS)
HERE IS ANOTHER CUSTOM ROM I UPLOADED FOR ALCATEL T’POP(4010A, 4010X, 4010D, 4010E ). THIS MOD CAN BE USED AS STOCK ROM.
The installation is the same as shown above
download mutacion.zip from here(link below)
save the zip in root of sd card.
download Restaurar folder from here (link below)
copy/move it to /clockworkmod>backup
reboot your phone to recovery mode and wipe ALL cache , Wipe data/factory reset .
the next step is to install mutacion.zip. procedure is shown above.
still in recovery mode, go to backup and restore and restore your device with the files you downloaded shown as /Restaurar
reboot your device and enjoy.
Click to expand...
Click to collapse
thanks for the guide xda z the oñly place to be
kakalex said:
Av tried it but its not working well with 4010D as only one simcard being detected
Click to expand...
Click to collapse
So how did you solve the dual SIM issue?
Sent from my C2305 using XDA Free mobile app
DO NOT EVER TRY TO USE THIS FOR 4010D model. SECOND SIM UTILITY IS GONNA GET LOST!!
Can anyone please give me original rom backup for 4010D. My rom is crashed and I am not able to boot it. And PC also not detecting the device (May be problem with Drivers). I didn't took bakup, can you give ??
Hey guys, I'm trying to root this Alcatel 4010X and I'm following the instructions.
I installed the usb drivers to my laptop, installed ishuaji_root.exe an ran it..... Followed all the instructions and now my phone has restarted but has a lot of chinese writing - different apps etc, even though the phone language is still UK
I'm struggling with the next bit about installing CWM - I've installed it to my laptop via this https://www.xda-developers.com/how-to-install-clockworkmod/ link,but I'm unsure what I need to do now....
Does anyone know the newest version of android that will work on this handset?
itnorfolk said:
Does anyone know the newest version of android that will work on this handset?
Click to expand...
Click to collapse
There is no newer version. Only skinned versions of those newer ROMs.
So Guys I am here to give you all rooting tutorial for spice mi 509, how to install CWM recovery and firmwares installation
First of all download
SPflashtool(download here),
mtk droid tool(download here)
firmwares for spice m 509 download1, download2
ALL firmwares are stock firmwares
Flashing KitKat rom on spice mI 509
1: download firmware from this site(download Firmware v5). and extract it at a particular folder. In the firmware you will get spflashtool and drivers included. so if your drivers are not installed using usb cable install drivers from firmware.
2: now open spflashtool.exe and switch off your phone.
3: and click on scatter loading which is the second option in right and select MT6582_scatter_loading.txt file from firmware.
4: you will see many files are loaded.
5: now click download and connect your device without battery. when connected, press vol down so that spflashtool recognizes your device.
6: then you will see some blue and yellow bar filling up which means process is started. and when process completed you will see a green ring on the screen.
7: now start your device and enjoy KitKat on Spice Mi 509.
Now if you want to root your device
1: open mtk droid tool and switch off device
2: now connect the device using usb cable, while connecting press vol down button. this will install adb drivers of the device and if the drivers are already installed, mtkdroid tool will detect it.
3: now click on root at right corner of mtkdroid tool.
this will start rooting your device.
Now how to install CWM recovery in spice mi 509
1: open mtkdroid tool
2: click on root, recovery and backup and then select boot.img from the firmware downloaded above.
3: and you will see recovery file is made for the device
4: now close mtkdroid tool and place the CWM recovery(not boot patched), which you have made, in the firmware folder and rename it to recovery.img
5: now open spflashtool and load scatter file from firmware folder.
6: and uncheck all loaded files and only tick on recovery.
7: now click download and connect your device in switched off using USB cable and after connecting press vol down so that droid tool can detect your device.
8: and thus after the process completed you will see green ring. and now disconnect your device.
and open cwm recovery by pressing vol down and power button.
Now if above given rooting method does not work. use this method.
1: when you have installed CWM recovery download this super_SU zip.
2: and place this on your sd card
3: now open cwm in device and flash this zip by selcting install from sd and then select super_SU zip file.
4: your device is now rooted.
CUSTOM ROMS For Spice MI 509
1. FREEME OS(Awesome rom)- DOWNLOAD HERE
2. DARKL V1.6(Awesome)- Download Here
3. MIUI V6 5.4.10(Awesome rom, recommended)-> DOWNLOAD HERE
4. CLEANKAT V4.0(more free ram)- Download Here
5. Hive ROM (Awesome) -> Download Here
6. Touch OS (Fast and Smooth) -> Download Here
7. MERE(Most Epic Rom Ever)-> Download Here
Dolby Sound For Mere Rom- Download Here
8- Material V3 Rom-> Download Here
Fix For Material V3 Rom-> download here
9- Lewa OS V5 (only one bug-play store not wprking, use third party app)
DOWNLOAD HERE
10. LG G3 Clone Rom - DOWNLOAD HERE
11. Galaxy Rom- DOWNLOAD HERE
12. SlimFresh V9: DOWNLOAD HERE
13. XTREME os8: DOWNLAOD HERE
14. ANSP V4: DOWNLOAD HERE
Method to flash custom roms
1. You must be on Spice Stock Kitkat. Download from above link.
2. CWM/CTR must be installed.
3. Boot into recovery and Wipe Data-Factory Reset.
4. Now select Install zip and browse to the location where you have MERE ROM or MATERIAL V3 ROM zip and install it.
5. Reboot your device.
6. Flash the fix zip(only For Material Rom) and dolby digital zip(only for MERE Rom) after the first boot. We are done!
All the best!
Note:- I am not responsible for phone brick, tsunami or earth quake happens after this tutorial, if you follow!!!
:- flash dolby digital zip only for MERE rom
:- Flash fix.zip only for Material V3
how to connect usb pen drive
How to connect pen drive and external hdd to spice mi 509
cwm has working on my mobile but without sp flash tool
prasad143 said:
cwm has working on my mobile but without sp flash tool
Click to expand...
Click to collapse
the mobile comes with its own custom recovery and does not allow any flashing. And above tutorial is for those who are facing problem in rooting mi509 with kitkat. and flashing CWM using spflashtool does not require root.
cyanogenmod
how to cyanogenmod on spice mi509
here is the new MERE rom from Mr. illusionist...
http://forum.xda-developers.com/android/general/mt6582-epic-rom-spice-stellar-t2998644#post58079880
they are uploading the file and will be soon available for download
New roms added including MIUI V6
New Roms added Including AWESOME MIUI V6 rom.
gautam.is.sharma said:
New Roms added Including AWESOME MIUI V6 rom.
Click to expand...
Click to collapse
Hi Gautam,
Can you please advice how to install MIUI V6 install on my Spice Mi 509,
I am install kingroot and rooted.
Can just download miui rom and copy in sd card and update?
MIUI rom update without PC its possible.
Kind Regards
Manoj K. Chauhan
km230580 said:
Hi Gautam,
Can you please advice how to install MIUI V6 install on my Spice Mi 509,
I am install kingroot and rooted.
Can just download miui rom and copy in sd card and update?
MIUI rom update without PC its possible.
Kind Regards
Manoj K. Chauhan
Click to expand...
Click to collapse
Bro you dont need pc and laptops for installation of custom roms just needed a rooted device with CWM Recovery.
you should be on stock KITKAT.
For MIUI installations install CWM/CTR first, if you are having CWM/CTR already, then just put miui rom in your sd card then go to recovery in spice mi509.
Now wipe data and format system, then install from sd card. and reboot. wait for 5 min, and there you will explore miui in MI509.
say thanks to the porter of the rom.
gautam.is.sharma said:
Bro you dont need pc and laptops for installation of custom roms just needed a rooted device with CWM Recovery.
you should be on stock KITKAT.
For MIUI installations install CWM/CTR first, if you are having CWM/CTR already, then just put miui rom in your sd card then go to recovery in spice mi509.
Now wipe data and format system, then install from sd card. and reboot. wait for 5 min, and there you will explore miui in MI509.
say thanks to the porter of the rom.
Click to expand...
Click to collapse
http://cdn4.xda-developers.com/images/icons/icon14.gif
Thanks for your reply gautam, I have Android 4.2.2 version in my phone.
Can you please advice what can i do? to install MIUI rom....
km230580 said:
http://cdn4.xda-developers.com/images/icons/icon14.gif
Thanks for your reply gautam, I have Android 4.2.2 version in my phone.
Can you please advice what can i do? to install MIUI rom....
Click to expand...
Click to collapse
Click Thanks button instead of saying so. That helps a lot.
Flash stock Kitkat and then only you can install MIUI. Complete procedure is given in the first post.
NEW ROMS UPLOADED
FREEME OS-http://forum.xda-developers.com/android/development/mt6582-freeme-os-v3-0-spice-mi-509-t3051987
DarkL V1.6- http://forum.xda-developers.com/android/development/mt6582-darkl-v1-6-spice-mi-509-t3051857
saurabh1234 said:
NEW ROMS UPLOADED
FREEME OS-http://forum.xda-developers.com/android/development/mt6582-freeme-os-v3-0-spice-mi-509-t3051987
DarkL V1.6- http://forum.xda-developers.com/android/development/mt6582-darkl-v1-6-spice-mi-509-t3051857
Click to expand...
Click to collapse
Added your new roms.
This method work in spice steller mi 526?
gautam.is.sharma said:
So Guys I am here to give you all rooting tutorial for spice mi 509, how to install CWM recovery and firmwares installation
First of all download
SPflashtool(download here),
mtk droid tool(download here)
firmwares for spice m 509 download1, download2
ALL firmwares are stock firmwares
Flashing KitKat rom on spice mI 509
1: download firmware from this site(download Firmware v5). and extract it at a particular folder. In the firmware you will get spflashtool and drivers included. so if your drivers are not installed using usb cable install drivers from firmware.
2: now open spflashtool.exe and switch off your phone.
3: and click on scatter loading which is the second option in right and select MT6582_scatter_loading.txt file from firmware.
4: you will see many files are loaded.
5: now click download and connect your device without battery. when connected, press vol down so that spflashtool recognizes your device.
6: then you will see some blue and yellow bar filling up which means process is started. and when process completed you will see a green ring on the screen.
7: now start your device and enjoy KitKat on Spice Mi 509.
Now if you want to root your device
1: open mtk droid tool and switch off device
2: now connect the device using usb cable, while connecting press vol down button. this will install adb drivers of the device and if the drivers are already installed, mtkdroid tool will detect it.
3: now click on root at right corner of mtkdroid tool.
this will start rooting your device.
Now how to install CWM recovery in spice mi 509
1: open mtkdroid tool
2: click on root, recovery and backup and then select boot.img from the firmware downloaded above.
3: and you will see recovery file is made for the device
4: now close mtkdroid tool and place the CWM recovery(not boot patched), which you have made, in the firmware folder and rename it to recovery.img
5: now open spflashtool and load scatter file from firmware folder.
6: and uncheck all loaded files and only tick on recovery.
7: now click download and connect your device in switched off using USB cable and after connecting press vol down so that droid tool can detect your device.
8: and thus after the process completed you will see green ring. and now disconnect your device.
and open cwm recovery by pressing vol down and power button.
Now if above given rooting method does not work. use this method.
1: when you have installed CWM recovery download this super_SU zip.
2: and place this on your sd card
3: now open cwm in device and flash this zip by selcting install from sd and then select super_SU zip file.
4: your device is now rooted.
CUSTOM ROMS For Spice MI 509
1. FREEME OS(Awesome rom)- DOWNLOAD HERE
2. DARKL V1.6(Awesome)- Download Here
3. MIUI V6 5.4.10(Awesome rom, recommended)-> DOWNLOAD HERE
4. CLEANKAT V4.0(more free ram)- Download Here
5. Hive ROM (Awesome) -> Download Here
6. Touch OS (Fast and Smooth) -> Download Here
7. MERE(Most Epic Rom Ever)-> Download Here
Dolby Sound For Mere Rom- Download Here
8- Material V3 Rom-> Download Here
Fix For Material V3 Rom-> download here
9- Lewa OS V5 (only one bug-play store not wprking, use third party app)
DOWNLOAD HERE
10. LG G3 Clone Rom - DOWNLOAD HERE
11. Galaxy Rom- DOWNLOAD HERE
12. SlimFresh V9: DOWNLOAD HERE
13. XTREME os8: DOWNLAOD HERE
14. ANSP V4: DOWNLOAD HERE
Method to flash custom roms
1. You must be on Spice Stock Kitkat. Download from above link.
2. CWM/CTR must be installed.
3. Boot into recovery and Wipe Data-Factory Reset.
4. Now select Install zip and browse to the location where you have MERE ROM or MATERIAL V3 ROM zip and install it.
5. Reboot your device.
6. Flash the fix zip(only For Material Rom) and dolby digital zip(only for MERE Rom) after the first boot. We are done!
All the best!
Note:- I am not responsible for phone brick, tsunami or earth quake happens after this tutorial, if you follow!!!
:- flash dolby digital zip only for MERE rom
:- Flash fix.zip only for Material V3
Click to expand...
Click to collapse
This is work on spice Steller mi 526?
kevinsubba said:
This is work on spice Steller mi 526?
Click to expand...
Click to collapse
yes it will work......you only need to have your mi 526 firmware...not mi 509 firmware...