atrix mb865 at&t update to ics ..need help - Motorola Atrix 2

guyz i need help..
i think this is the right time to call for ur help
i want to install custom rom but im on 2.3.6 version..i read that we must be on 4.0.4 version in order to install custom roms and use BMM..
i tried to update through stock recovery from this file Blur_Version.55.13.25.MB865.ATT.en.US.zip from this thread
http://forum.xda-developers.com/showthread.php?t=1779968
but it gives error 7(assert failed :apply patch_check(SYstem/app..............)error in /tmp/sideload)..
then i tried to update through RSDlite but it gives error at first step that modem flash fail...InlineFlashing_Edison_67.21.125_RSDlight.zip..this is the file which i used...
now i need help to update to ics..thnx.
waiting for reply

Can you post screenshot of the rsd lite error!??
Sent from my MB865 using Tapatalk 2

devilhunter47 said:
Can you post screenshot of the rsd lite error!??
Sent from my MB865 using Tapatalk 2
Click to expand...
Click to collapse
this is the sceenshot

BaCkkk said:
this is the sceenshot
Click to expand...
Click to collapse
Okk are all drivers installed??..is fastboot showing device connected??..ur device is not shown in the rsd lite here
Sent from my MB865 using Tapatalk 2

devilhunter47 said:
Okk are all drivers installed??..is fastboot showing device connected??..ur device is not shown in the rsd lite here
Sent from my MB865 using Tapatalk 2
Click to expand...
Click to collapse
fastboot devices showing my phone..now dude?

i tried to update it officially from wifi...all file download successfully...goes to recovery...install update but after sometime automaticaly reboots from recovery and then phone power on and gives error update failed

Did u boot into fastboot by pressing both volume buttons and power button???..after that connect to pc..if your phone is at n t and all drivers are installed this should work bro
Sent from my MB865 using Tapatalk 2

devilhunter47 said:
Did u boot into fastboot by pressing both volume buttons and power button???..after that connect to pc..if your phone is at n t and all drivers are installed this should work bro
Sent from my MB865 using Tapatalk 2
Click to expand...
Click to collapse
when i press both buttons with power ..menu came with following options
normal boot
ap fastboot mode
recovery mode.
i select ap fastboot mode
but same issue which i told in main post

BaCkkk said:
when i press both buttons with power ..menu came with following options
normal boot
ap fastboot mode
recovery mode.
i select ap fastboot mode
but same issue which i told in main post
Click to expand...
Click to collapse
The screenshot you posted of RSD lite shows a USB error. Make sure you're using a good quality cable (preferably the Motorola cable that came with the phone) and that you're plugged in to a USB port on the back of the PC and be sure it has a good connection. If nothing else, try using a different PC altogether. :thumbup:

Related

Tell me I've not bricked my Xoom!!!

I've just tried to root my wifi only Xoom using the 1 click method, but didn't see there was a tab for wifi only & a 3G tab. I went through the options using the 3G options.
Now my Xoom's stuck at the red Motorola screen & won't go any further.
Are there any threads to reverse my balls up?? I've had a look but can't see anything
Please tell me I've not bricked it?!?
tell me why you posted this in the wrong section
I could tell you that it's not bricked...but then I might be lying.
Moved to Q&A. This is not development.
You will need to adb and flash recovery then flash the rom again.
Sent from my PC36100 using Tapatalk
PaulG1488 said:
tell me why you posted this in the wrong section
Click to expand...
Click to collapse
Sorry, I didn't realise I'd put it in the wrong place.
Do you know if I've stuffed my Xoom?
thanks
alex2792 said:
You will need to adb and flash recovery then flash the rom again.
Sent from my PC36100 using Tapatalk
Click to expand...
Click to collapse
Do you know how I do this. I can't get adb working??
So the Xoom isn't recognizes when you type adb devices?
Sent from my PC36100 using Tapatalk
alex2792 said:
So the Xoom isn't recognizes when you type adb devices?
Sent from my PC36100 using Tapatalk
Click to expand...
Click to collapse
It's ok alex, I've managed to get the stock boot & system images on it again. Just updating to 3.1 again now.
clemo71 said:
It's ok alex, I've managed to get the stock boot & system images on it again. Just updating to 3.1 again now.
Click to expand...
Click to collapse
how do you solved ? ive the same problem on my xoom...
davidebeatrice said:
how do you solved ? ive the same problem on my xoom...
Click to expand...
Click to collapse
clemo71 said:
It's ok alex, I've managed to get the stock boot & system images on it again. Just updating to 3.1 again now.
Click to expand...
Click to collapse
Please let us poor souls know how you did it!!! I am stuck with the same problem - the screen freezes with the Motorola logo and the tablet wouldn't boot up!
For those still having issues, try going into fastboot and flashing the stock images.
You can access fastboot by restarting your xoom (power and vol up) and then once the red M comes up, tap the volume down key around a second later. You have a decent window of opportunity to press the key. This should take you to the bootloader. Once in there, use the volume down key to enter fastboot.
From fastboot you can either flash a custom recovery then from the recover install the BRD 3.1 rooted update, or you can just use the fastboot flash command to flash each partition back to stock.
Good luck.
willverduzco said:
For those still having issues, try going into fastboot and flashing the stock images.
You can access fastboot by restarting your xoom (power and vol up) and then once the red M comes up, tap the volume down key around a second later. You have a decent window of opportunity to press the key. This should take you to the bootloader. Once in there, use the volume down key to enter fastboot.
From fastboot you can either flash a custom recovery then from the recover install the BRD 3.1 rooted update, or you can just use the fastboot flash command to flash each partition back to stock.
Good luck.
Click to expand...
Click to collapse
Thanks . I have now installed custom recovery (ClockworkMod 3.0.2.8) but where do I get the rooted or stock ROM from? I suppose it has to be in a *.zip format.

phone not reboot into recovery mode

i m using sense 4.0a ... phone works normal, boot fast boot normaly, but not reboot into recovery... plz help
If you can boot your phone in the fastboot mode, then you can flash recovery again...
Just boot your phone up using the Power + Vol. Dwn buttons combo, then at the white screen, connect your phone to pc, and flash a recovery.img file..
U should be fine..
bhargz16 said:
If you can boot your phone in the fastboot mode, then you can flash recovery again...
Just boot your phone up using the Power + Vol. Dwn buttons combo, then at the white screen, connect your phone to pc, and flash a recovery.img file..
U should be fine..
Click to expand...
Click to collapse
thnx mate for help.... phone boot into fastboot, but when boot into recovery, it back into bootloader
in fastboot mode , when flash recovery img. it shows in camand "waiting for device"..... bot no further progress :crying:
Kaleem_qadir said:
in fastboot mode , when flash recovery img. it shows in camand "waiting for device"..... bot no further progress :crying:
Click to expand...
Click to collapse
does usb work in the rom?? could be a problem with the usb port or cable..
Sent from my HTC Explorer A310e using xda app-developers app
i have sense 4.0a . in this rom still USB not fixd.... Now what i should do?
bhargz16 said:
does usb work in the rom?? could be a problem with the usb port or cable..
Sent from my HTC Explorer A310e using xda app-developers app
Click to expand...
Click to collapse
in sense 4.0a rom... USB not working
ok.. try flashing a different rom with in fastboot mode, and there, if usb is detected, ie, if u dnt get the "waiting for device" message anymore, u can flash another recovery...
bhargz16 said:
ok.. try flashing a different rom with in fastboot mode, and there, if usb is detected, ie, if u dnt get the "waiting for device" message anymore, u can flash another recovery...
Click to expand...
Click to collapse
dear how can i flash other rom without recovery?
Kaleem_qadir said:
dear how can i flash other rom without recovery?
Click to expand...
Click to collapse
yes you can... You need to use the command "fastboot flash update update.zip"... All you have to do is rename ur rom zip file as update.zip... just like you flash a recovery...
Sent from my HTC Explorer A310e using xda app-developers app
bhargz16 said:
yes you can... You need to use the command "fastboot flash update update.zip"... All you have to do is rename ur rom zip file as update.zip... just like you flash a recovery...
Sent from my HTC Explorer A310e using xda app-developers app
Click to expand...
Click to collapse
Thanx bro..... i got it.... :fingers-crossed:

[Q] How do I get back to Stock rom - [email protected] J

Where can I get a stockrom for my J and how can I flash it? Thnx
1. Download this
https://docs.google.com/file/d/0B_d8uWGbkaetdHRKbXExNGszRUk/edit?pli=1
2. Turn off phone ,hold.volume up button and connect.usb cable,you will see blue led light and this mean you are in fastboot mode.
3. Open flashtool,hope you have all drivers.installed.
4.Click fastboot mode option in flashtool and search for firmware file and flash it.
I hope my.instructions are correct I forgot ... Search for.instructions in thread.
Sent from my ST26i using xda premium
2010matej said:
1. Download this
https://docs.google.com/file/d/0B_d8uWGbkaetdHRKbXExNGszRUk/edit?pli=1
2. Turn off phone ,hold.volume down button and connect.usb cable,you will see blue led light and this mean you are in fastboot mode.
3. Open flashtool,hope you have all drivers.installed.
4.Click fastboot mode option in flashtool and search for firmware file and flash it.
I hope my.instructions are correct I forgot ... Search for.instructions in thread.
Sent from my ST26i using xda premium
Click to expand...
Click to collapse
no drag ftf file in flashtool window then click ok in the next window wait for files to finish preparing then when prompt comes up hold vol- key while inserting the usb cable then GREEN LIGHT WILL SHOW keep hold until flashing starts then when its finished VIOLA!! back to stock rom Flash mode (green light) is needed for flashing stock firmware not fastboot mode (blue light) is for custom kernels or any boot.img
Soory my mistake i say i forgot...
Sent from my ST26i using xda premium
2010matej said:
Soory my mistake i say i forgot...
Sent from my ST26i using xda premium
Click to expand...
Click to collapse
lol thats ok bro
Thanks for help,
I just came back from holidays, now I'm downloading that file and will test it.
Ok have it on my phone, can I lock my boot to update by companion?
thanks
KRACHKIND said:
Ok have it on my phone, can I lock my boot to update by companion?
thanks
Click to expand...
Click to collapse
i dont no if relocking bootloader will enable you to us pc companian. my j has bootloader still locked because its branded

Could not get into recovery :(

I have a Indian Dual Sim Moto G .I followed the instructions to unlock the bootloader and worked. I tried to install a CWM recovery, got a "mismatched partition size" error, and I can't get into the recovery.Every time i select recovery option the bootloader unlocked warning error appears and then moto g reboots in normal mode.
Its already rooted.
I never tried getting into recovery before unlocking the moto g so i dont know whether installing the cwm ruined it or it was as it is from the beginning.
Edit:Btw i used this link to install the recovery http://wiki.cyanogenmod.org/w/Install_CM_for_falcon
rohanraarora said:
I have a Indian Dual Sim Moto G .I followed the instructions to unlock the bootloader and worked. I tried to install a CWM recovery, got a "mismatched partition size" error, and I can't get into the recovery.Every time i select recovery option the bootloader unlocked warning error appears and then moto g reboots in normal mode.
Its already rooted.
I never tried getting into recovery before unlocking the moto g so i dont know whether installing the cwm ruined it or it was as it is from the beginning.
Edit:Btw i used this link to install the recovery http://wiki.cyanogenmod.org/w/Install_CM_for_falcon
Click to expand...
Click to collapse
That error always appears when you flash a recovery or any other partition, you can ignore it
Now for the recovery loop, try to flash the recovery again with any of these:
CWM: http://forum.xda-developers.com/showthread.php?t=2563599
TWRP: http://forum.xda-developers.com/showthread.php?t=2561757
STOCK: inside any 4.4 or 4.3 ROM you'll find a "recovery.img" http://sbf.droid-developers.org/phone.php?device=14
Mototool
Try mototool and try to flash recovery with this. Worked perfectly for me and i had no problems. You can find mototool in original Android development section.
Hi, actually the problem you're facing is user-side error.
1) mismatched error is common, you can ignore it (as said above). It's because the recovery you're installing isn't singed by Motorola; it's custom - as name suggest, thus "mismatching".
2) when you reboot your device without actually doing anything, the stock ROM overwrites your custom recovery with factory default one, therefore you should make sure to put all the required files and don't reboot unless you're done.
Hope it helps.
What About ADB?
rohanraarora said:
I have a Indian Dual Sim Moto G .I followed the instructions to unlock the bootloader and worked. I tried to install a CWM recovery, got a "mismatched partition size" error, and I can't get into the recovery.Every time i select recovery option the bootloader unlocked warning error appears and then moto g reboots in normal mode.
Its already rooted.
I never tried getting into recovery before unlocking the moto g so i dont know whether installing the cwm ruined it or it was as it is from the beginning.
Edit:Btw i used this link to install the recovery http://wiki.cyanogenmod.org/w/Install_CM_for_falcon
Click to expand...
Click to collapse
What if you boot up fully, turn on USB debugging, and use adb from pc to boot to recovery
Code:
adb reboot recovery
Does that work?
I think you are pressing the power button to select the recovery... In Fastboot mode, use up button to select... If you press power button in Fastboot mode, your phone will reboot in to normal mode...
Sent from my XT1033 using XDA Premium 4 mobile app
deej_roamer said:
What if you boot up fully, turn on USB debugging, and use adb from pc to boot to recovery
Code:
adb reboot recovery
Does that work?
Click to expand...
Click to collapse
I tried it but it reboots normally
padhu1989 said:
I think you are pressing the power button to select the recovery... In Fastboot mode, use up button to select... If you press power button in Fastboot mode, your phone will reboot in to normal mode...
Sent from my XT1033 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I used Volume Up button
Try other recoveries!
rohanraarora said:
I used Volume Up button
Click to expand...
Click to collapse
Did you try all available recoveries? viz. CWM, TWRP, Philz?
How did you flash the recovery.? Using Fastboot right?
Sent from my XT1033 using XDA Premium 4 mobile app
deej_roamer said:
Did you try all available recoveries? viz. CWM, TWRP, Philz?
Click to expand...
Click to collapse
I tried CWM and TWRP I will try PHILZ too and let you know
padhu1989 said:
How did you flash the recovery.? Using Fastboot right?
Sent from my XT1033 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yes Using Fastboot
I want the moderator to ban me.
rohanraarora said:
Yes Using Fastboot
Click to expand...
Click to collapse
Download it and try flash it again... Download CWM recover img. download the correct version for your model...
Put it in the platform tools directory and put the phone in fastboot mode, connect the USB.. Then open command prompt inside the Platform tools folder..
check whether device is identified by the fastboot or not by using the command "fastboot devices" .. you wil get your device id if it connected.
Then use the beloww command to flash it...
fastboot flash recovery recoveryname.img
once flashed, try open recovery from fastboot.. use Volme up button to select, not powerbutton...
Press Thanks if I helped you...
Maybe the last solution is reset your device.
Minervamc said:
Maybe the last solution is reset your device.
Click to expand...
Click to collapse
Reset yourself..
Sent from my XT1032 using XDA Premium 4 mobile app
Minervamc said:
Maybe the last solution is reset your device.
Click to expand...
Click to collapse
By reset you mean restoring the stock firmware?
rohanraarora said:
By reset you mean restoring the stock firmware?
Click to expand...
Click to collapse
Don't consider his suggestion.. He simply giving these suggestions in each and every thread.. You can see his post in different threads.. He just posting in order to increase his post counts... If I'm sound too rude, just check his profile and go statistics and read all his posts.. You will get to know...
Sent from my XT1032 using XDA Premium 4 mobile app
padhu1989 said:
Don't consider his suggestion.. He simply giving these suggestions in each and every thread.. You can see his post in different threads.. He just posting in order to increase his post counts... If I'm sound too rude, just check his profile and go statistics and read all his posts.. You will get to know...
Sent from my XT1032 using XDA Premium 4 mobile app[/Q]
Thanks
and i tried to flash the recovery again its still the same.
Click to expand...
Click to collapse
rohanraarora said:
padhu1989 said:
Don't consider his suggestion.. He simply giving these suggestions in each and every thread.. You can see his post in different threads.. He just posting in order to increase his post counts... If I'm sound too rude, just check his profile and go statistics and read all his posts.. You will get to know...
Sent from my XT1032 using XDA Premium 4 mobile app[/Q]
Thanks
and i tried to flash the recovery again its still the same.
Click to expand...
Click to collapse
Did you downloaded the correct version of cwm?
Sent from my XT1032 using XDA Premium 4 mobile app
Click to expand...
Click to collapse

Phone stuck un BootLoop and cant get into recovery mode

Hi.
Today my phone suddenly restart itself and got stuck in bootloop
I can go into the (Vol Up + Power) Menu but if i pick recovery mode it just goes back to the bootloop
Fastboot mode seems to work but i dont have usb debugging
Odin cant see it
Do i have any chance of getting the phone working again?
It is a Doogee x5max rooted with the "clean rom"
The Recovery has nothing to do with other partitions.And Odin can see you anyways if debugging is on or off.I think it is a hardware issue as you can't boot to Recovery.
Sent from my Pixel 3 XL using Tapatalk
Atifbaig786 said:
The Recovery has nothing to do with other partitions.And Odin can see you anyways if debugging is on or off.I think it is a hardware issue as you can't boot to Recovery.
Sent from my Pixel 3 XL using Tapatalk
Click to expand...
Click to collapse
Hmm interesting.
Is there any way to confirm hardware issue? Also didn't odin need the phone in download/recovery mode to do anything?
watiti said:
Hmm interesting.
Is there any way to confirm hardware issue? Also didn't odin need the phone in download/recovery mode to do anything?
Click to expand...
Click to collapse
Run a diagnostic or log while connected
Sent from my Pixel 3 XL using Tapatalk
watiti said:
Hmm interesting.
Is there any way to confirm hardware issue? Also didn't odin need the phone in download/recovery mode to do anything?
Click to expand...
Click to collapse
Yes, Odin requires the device to be in download mode, but Odin only works on Samsung devices, it isn't compatible with other devices.
Fastboot isn't going to work without USB debugging enabled.
Sent from my LGL84VL using Tapatalk
Droidriven said:
Yes, Odin requires the device to be in download mode, but Odin only works on Samsung devices, it isn't compatible with other devices.
Fastboot isn't going to work without USB debugging enabled.
Sent from my LGL84VL using Tapatalk
Click to expand...
Click to collapse
If fastboot works you can flash a recovery. If not working, flash a stock boot image and then custom recovery . Once you get into recovery problem solved.
pbteja said:
If fastboot works you can flash a recovery. If not working, flash a stock boot image and then custom recovery . Once you get into recovery problem solved.
Click to expand...
Click to collapse
You are responding to the wrong person, I'm not the one having the issue.
Sent from my LGL84VL using Tapatalk

Categories

Resources