Database Info

help needed for cm9.1...

thanq for viewing ma thread.. i moderate noob cz i researched many things about rooting, flashing, etc., but still i have some confusions..
basically i rooted my htc explorer with jaggy rooting tutorial. so now i want to flash with [DEV][ROM][ICS][4.0.4][IMM76L]Unofficial CyanogenMod 9.1 for Pico Build#9 {3/11/2012} rom.. buti have somedoubts pls kindly clarify me..
1. is there any problem with cm9.1. i read that it drain in half a day even in normal use.. is that true..
2. now i have Yannou's recovery..can i flash thru that..
3. before flashing should i partition ma sd card or can we do dat after flashin?? if i should do partition which is best ext2/3/4 or fat32. now ma sd card isnt partitioned once also. so can i do before flashing then after have to move cm9.1 rom zip file to sd card.
4. i read that partition can also be done with recovery menu.. is that true. if yes. how to do that.. i read partition for s2e(http://forum.xda-developers.com/showthread.php?t=1859691- here) what about link2sd.. can we partion for link2sd by(http://forum.xda-developers.com/showpost.php?p=29724634&postcount=3 ) with that can we do.. will it work for cm9.1.
5. i read instruction for for flashing cm9.1 rom. there are two different methods which one to follow.
Installation
First time installing CyanogenMod 9 to your Htc Explorer/Pico, or coming from another ROM:
- Make sure you're running a proper working ClockworkMod-Recovery
- Copy GApps and CM9 ZIPs to your SDCard
- Boot into Recovery
- Flash CM9 zip from SDCard
- Flash GApps zip from SDCard
- DO A DATA WIPE / FACTORY RESET (otherwise your device will be stuck at boot)
- Reboot
- Don't restore data using Titanium Backup! they might cause FC's
- Restoring Apps + Data might cause problems and is not recommended, avoid it if possible! (metioned in http://forum.xda-developers.com/showthread.php?p=29938916) or (http://forum.xda-developers.com/showpost.php?p=33608084&postcount=2897).
please help me.. waitin for ua valuble reply..

Guide
Hey there
1. The battery life depends on how you use your phone. If you’re connected to a 3G network all day while playing or watching videos, the battery won’t last that long. For casual everyday use, the battery is great. I didn’t charge it for 2 days once
2. Yes, you can flash through yannou’s recovery but it would be ideal if you flash CWM recovery since it’s recommended. If you partition your sd card, it will be automatically formatted so its best if you back up your data, partition the sd card and then copy all the files. You can partition using CWM and then install Link2sd which, when opened, it will prompt you with the file system of your sd ext. Choose ext3 and reboot. The partition itself isn’t needed for cm9.1 but you can you a2sd scripts if you’re partitioned.
3. To flash it, download the rom and gapps. Put them in the sdcard. Then boot into recovery, wipe data/factory reset, go to advanced -> wipe dalvik. Then install zip from sd card and find the rom. After you flash the rom, flash the gapps and reboot. Give it a few minutes since the first boot takes some time. And there you go
_______________________________________________________________________________________________________________________
Remember to hit the thanks button! It won’t hurt, I promise

bijgu said:
Hey there
1. The battery life depends on how you use your phone. If you’re connected to a 3G network all day while playing or watching videos, the battery won’t last that long. For casual everyday use, the battery is great. I didn’t charge it for 2 days once
2. Yes, you can flash through yannou’s recovery but it would be ideal if you flash CWM recovery since it’s recommended. If you partition your sd card, it will be automatically formatted so its best if you back up your data, partition the sd card and then copy all the files. You can partition using CWM and then install Link2sd which, when opened, it will prompt you with the file system of your sd ext. Choose ext3 and reboot. The partition itself isn’t needed for cm9.1 but you can you a2sd scripts if you’re partitioned.
3. To flash it, download the rom and gapps. Put them in the sdcard. Then boot into recovery, wipe data/factory reset, go to advanced -> wipe dalvik. Then install zip from sd card and find the rom. After you flash the rom, flash the gapps and reboot. Give it a few minutes since the first boot takes some time. And there you go
_______________________________________________________________________________________________________________________
Remember to hit the thanks button! It won’t hurt, I promise
Click to expand...
Click to collapse
did u use CM9.1 .
is flashing process is same for yannou’s recovery.
i know about yannou’s recovery.. but what about CWM recovery.. from where i can get dat.. cus jaggy flashing process providing only yannou’s recovery.. so how can i shift to CWM recovery..

bijgu said:
Hey there
1. The battery life depends on how you use your phone. If you’re connected to a 3G network all day while playing or watching videos, the battery won’t last that long. For casual everyday use, the battery is great. I didn’t charge it for 2 days once
2. Yes, you can flash through yannou’s recovery but it would be ideal if you flash CWM recovery since it’s recommended. If you partition your sd card, it will be automatically formatted so its best if you back up your data, partition the sd card and then copy all the files. You can partition using CWM and then install Link2sd which, when opened, it will prompt you with the file system of your sd ext. Choose ext3 and reboot. The partition itself isn’t needed for cm9.1 but you can you a2sd scripts if you’re partitioned.
3. To flash it, download the rom and gapps. Put them in the sdcard. Then boot into recovery, wipe data/factory reset, go to advanced -> wipe dalvik. Then install zip from sd card and find the rom. After you flash the rom, flash the gapps and reboot. Give it a few minutes since the first boot takes some time. And there you go
_______________________________________________________________________________________________________________________
is it necessary to wipe dalvik bcause i didnt do it and it works fine
Click to expand...
Click to collapse

No, no, stick with yannou's! Official cwm sometimes give's mounting issues with our phone, and sometimes if you drain fully your battery you'll get in to adventure.
Yes flashing process is the same, basikly everything is the same as cwm

Install ROM Manager on your phone and the first option should be to install Clockworkmod Recovery. Follow the instructions on screen. I'd use yannou's recovery though.
Yes, the instructions are the same for yannou's recovery.
And yes, I've used cm9.1 for over 2 months. I'm using HTC sense 4.0a rom by derefas right now
Remember to hit the thanks button! It won’t hurt, I promise

cool
shree alwaz said:
thanq for viewing ma thread..
Click to expand...
Click to collapse
Here is my opinion and instruction
1. is there any problem with cm9.1. i read that it drain in half a day even in normal use.. is that true..
Click to expand...
Click to collapse
I am not sure about the build #9 but build #11 is really cool.. Here is the link. U also get the link form the post u mention above under the page 305
http://teamthundersquad.blogspot.in/2012/11/cm-9-nightly-build-11-for-htc-explorer.html
But as far i heard nothing wrong with build#9 too. So try both..
Click to expand...
Click to collapse
2. now i have Yannou's recovery..can i flash thru that..
Click to expand...
Click to collapse
Nothing serious with this matter. Almost all recovery will work with this ROM. But my opinion is use TWRP recovery, it provide lot of feature also its provide touch support and ext partition support also....
Click to expand...
Click to collapse
3. before flashing should i partition ma sd card or can we do dat after flashing?? if i should do partition which is best ext2/3/4 or fat32. now ma sd card isnt partitioned once also. so can i do before flashing then after have to move cm9.1 ROM zip file to SD card.
Click to expand...
Click to collapse
its depends upon Ur need man. If Ur going to use internal memory increasing script u must have an 2nd partition in Ur SD card. ext2/3/4 is depend upon the memory script and ROM Ur going to use..
My Suggestion:
Try m2sd script with ext4 partition its work like a charm.. but i read from some post ext4 will damage SD sooner. but perform better. i am always need performance. but i am sure that till now no damage or performance issue occurred in my SD card as well as phone.
before or after partition is ur choice when u need partition u do it. But some ROM need 2nd partition while flashing be careful on that but cm9.1 doesn't need any support from sd card
Click to expand...
Click to collapse
5. i read instruction for for flashing cm9.1 rom. there are two different methods which one to follow.
Installation
Click to expand...
Click to collapse
Both the instruction telling the same thing for u. Here is my guide as same like they stated...
1.copy Ur ROM and GAPPS zip to ur SD-card
2.wipe all the partition data,cache,system,dalvik,etc... except SD-card
3.install ROM zip then install GAPPS zip.
4.Then reboot..
5.wait until u get the home screen.. first boot take some time so be patient
6.After that leave Ur phone for a minute then once again restart Ur phone.
7. final but important click thanks to the Developer and other who help u to install the ROM successfully..
this instruction is for clean installation this will never lead Ur device to problem
Click to expand...
Click to collapse

thanq u all.. but i have some clarification about partiton only.. can anybody give me guide about partitons for CM9.1 . which is best, simple and error free, wheather to go partition then flashing or flashing then partition.. and plz give me guide thru recovery.. and where its pre or post flashing.. pls do needful..

edit :
im unable to figure it out abot s2e scripts, int2sd scripts.. so please tell me actually what are those and how the linked with ext2/3/4 partitioms..

Its simple if ur using recovery for partition u will lose all the data in SD card. So use mini partition wizard tool for make partition.. after or before flashing is does not matter if u going to add memory script then partition memory card... then add the rom zip then flash it..
Sent from my HTC Explorer A310e using xda app-developers app

As much as i remember, Older builds of CM9.1 had battery drain problems. It has been rectified in the latest builds (Aleast have been rectified in build 10 and 11)
I say you go for CM9.1 Build 11 by ayushrox. I am using it right now. I run my phone with extensive Music usage for 1 and half to 2 days. I have once kept my phone running without charge for 3 days. Right now as i type, i am off the charger for 12 hours, still i have 55% battery remaining, this is good for me, as i use an always on internet.
I never used CWM. I use a different recovery (i dont know its name), and i flash using it successfully.
I use Link2SD with a partition i made BEFORE the installation. I use Minitool Partition Wizard to create partitions. It is for Windows.
I always ask people to do a clean install. This would eradicate any issues in the future.

vasanth3008 said:
Its simple if ur using recovery for partition u will lose all the data in SD card. So use mini partition wizard tool for make partition.. after or before flashing is does not matter if u going to add memory script then partition memory card... then add the rom zip then flash it..
Sent from my HTC Explorer A310e using xda app-developers app
Click to expand...
Click to collapse
Can u explain what are those sd scripts. What it'll do with the partition. Plz explain me.
Sent from my HTC Explorer A310e using xda app-developers app

tatiraju.rishabh said:
As much as i remember, Older builds of CM9.1 had battery drain problems. It has been rectified in the latest builds (Aleast have been rectified in build 10 and 11)
I say you go for CM9.1 Build 11 by ayushrox. I am using it right now. I run my phone with extensive Music usage for 1 and half to 2 days. I have once kept my phone running without charge for 3 days. Right now as i type, i am off the charger for 12 hours, still i have 55% battery remaining, this is good for me, as i use an always on internet.
I never used CWM. I use a different recovery (i dont know its name), and i flash using it successfully.
I use Link2SD with a partition i made BEFORE the installation. I use Minitool Partition Wizard to create partitions. It is for Windows.
I always ask people to do a clean install. This would eradicate any issues in the future.
Click to expand...
Click to collapse
After partition how to make scrpits for partition. Plz I heard that int2sd, mount2sd sripts. What are those.
Sent from my HTC Explorer A310e using xda app-developers app

shree alwaz said:
After partition how to make scrpits for partition. Plz I heard that int2sd, mount2sd sripts. What are those.
Sent from my HTC Explorer A310e using xda app-developers app
Click to expand...
Click to collapse
I have never used Mount2SD and int2sd
When you create a partition in your memory card, open Link2SD. Link2SD will ask you the partition type, select and tap ok. The app creates mount script by itself.
Link2SD is a 500KB app at the Play Store.

tatiraju.rishabh said:
I have never used Mount2SD and int2sd
When you create a partition in your memory card, open Link2SD. Link2SD will ask you the partition type, select and tap ok. The app creates mount script by itself.
Link2SD is a 500KB app at the Play Store.
Click to expand...
Click to collapse
So which is best link2sd or mount2sd for cm9.1 built 11. Can do parttion after flashing cm9.1. My doubt is if I flash the rom then Rom considers the memory of 150mb. So then after if I make patition will it change its internal memory from 150mb to partitioned memory. Pls. Explain me. Anyone.
Sent from my HTC Explorer A310e using xda app-developers app

Nobody don't know about ma query. Help me guys.
Sent from my HTC Explorer A310e using xda app-developers app

tatiraju.rishabh said:
As much as i remember, Older builds of CM9.1 had battery drain problems. It has been rectified in the latest builds (Aleast have been rectified in build 10 and 11)
I say you go for CM9.1 Build 11 by ayushrox. I am using it right now. I run my phone with extensive Music usage for 1 and half to 2 days. I have once kept my phone running without charge for 3 days. Right now as i type, i am off the charger for 12 hours, still i have 55% battery remaining, this is good for me, as i use an always on internet.
I never used CWM. I use a different recovery (i dont know its name), and i flash using it successfully.
I use Link2SD with a partition i made BEFORE the installation. I use Minitool Partition Wizard to create partitions. It is for Windows.
I always ask people to do a clean install. This would eradicate any issues in the future.
Click to expand...
Click to collapse
Previously i flashed cm 9.1 build 11 by ayushrox but it was giving me some problems 1.wifi was not working it always showed an error 2.when i tried to reboot or switch off my cell it used to get hang so i had to remove and re insert battery to make it work ... now i've switched back to build 9 and its running fine except for the video i record have no sounds in them but thats ok for me coz i usually dnt use my cell camera

help
please temme. today i wanna flash the cm 9.1. plz temme which is best built9 or 11.. what do u people say which is best for daily use, all things should work, games should support like backstab, shadowgun, nfs mostwanted like that.. and it should not drain fast.
n i wanna make partition of ma 8GB class4 sd card before flashing using mini partiton tool. so which is best ext2/3/4 or fat32. n which is best link2sd, mount2sd or anything else. and i no need to create/modify/change the mounts for those apps to use.. cz im not able to figure out what is that mounts acctually. n what is the use of those mount. if anybody explains about those im very much gladful.
n before partition i need to take backup.. it mean i need just copy paste the all the folder which are there in sd card.. its that correct or any method to use.. to get backup.
finally give me exact intraction to flash.. consider i had partiton sd card..
pls help.. ill make flash n wanna eat icecream sandwich today it self.. :crying:

ZaKa123 said:
Previously i flashed cm 9.1 build 11 by ayushrox but it was giving me some problems 1.wifi was not working it always showed an error 2.when i tried to reboot or switch off my cell it used to get hang so i had to remove and re insert battery to make it work ... now i've switched back to build 9 and its running fine except for the video i record have no sounds in them but thats ok for me coz i usually dnt use my cell camera
Click to expand...
Click to collapse
I never had any of those problems.
---------- Post added at 05:56 PM ---------- Previous post was at 05:48 PM ----------
shree alwaz said:
So which is best link2sd or mount2sd for cm9.1 built 11. Can do parttion after flashing cm9.1. My doubt is if I flash the rom then Rom considers the memory of 150mb. So then after if I make patition will it change its internal memory from 150mb to partitioned memory. Pls. Explain me. Anyone.
Sent from my HTC Explorer A310e using xda app-developers app
Click to expand...
Click to collapse
I never used Mount2SD and never will, cos link2sd works well for me.
Here is what i did:
1. Partition microSD with format ext2. (I used Minitool Partition Wizard for this. A freeware program for Windows)
2. Insert it in the phone, download Link2SD from Play Store.
3. Open Link2SD, it will prompt you to select your partition type. Select ext2.
4. Link2SD will create a mount script and ask you to restart the phone. Do so.
5. After restart, go back to Link2SD, press menu button to open menu.
6. Open "Settings". Make sure "Auto link" is ticked.
7. Exit Link2SD, do a restart.
Thats it! now whenever i install an app, Link2SD sends it to the partition automatically.
Sometimes you may get a phone memory full notification. In that case power off your phone and on it again.
EDIT: all this was done with CM9.1 previously installed.

So what are steps to install cm9.1.
Is it necessary to clear dalvik cache.
Sent from my HTC Explorer A310e using xda app-developers app

[Q] {Need Help - HTC Pico Rooted} Wipe factory data but internal memory is only 20mb

Hello
I have rooted my HTA Explorer and it was working fine then i flash custom rom MIUI then after i flash Cyanogenmod 9 build of 2012, it was also working good then i install stock rom just to check if i want to go back it was also working fine then i flash cyanogenmod 9 build 14 then it starts giving error like camera not loaded , cannot start calander etc.
I again flashed many roms randomly but my internal memory is only 23 mb left, I have checked through diskusage it says system data is 100 mb but there is no application installed.
I always wipe factory data reset and wipe cache partition before flashing new rom, i have also tried format data ,cache from mounts and storage but still i got only 23 mb available after flashing.
Now i am at my original backup of stock rom and if i flash cyanogenmod 9 it gives me error due to low internal memory.
I gues there is any old rom's data is still placed in my internal memory which needs to be wiped off, Please help me in this.
I have now use superwipe and installed cynogenmod 9 now it shows total space 150mn apps 26.99 and available 56.66 where is the rest 64.35mb ????
MODS
please help me out this .... if this is not th right place to ask then kindly move the thread to where it can be answered.

Wipe everything except sdcard
Then flash rom
Sent from my HTC Explorer A310e using xda premium

Hpsgill said:
Wipe everything except sdcard
Then flash rom
Sent from my HTC Explorer A310e using xda premium
Click to expand...
Click to collapse
Yes i did it but prob remains the same
I wipe data/ factory reset it and then flash rom it doesnt clear internal storage

which rom u tried??

Hpsgill said:
which rom u tried??
Click to expand...
Click to collapse
Cyanogenmod 9
Miui
Asian stock rom
Tried everyrom
Previously it was working fine but from last 2 days its internal storage was eaten up
Guys plz help me

Wipe Data/Factory Reset + Wipe Cache + Wipe Dalvik Cache and then try.
Can you specifically tell us which build? Some may have overclocked cpu and u may have a burnt NAND.

Same problem
I have the same problem.,,,i kept trying different roms... i did all d correct steps... wiped dalvik cache,wipe system,wipe boot,wipe cache, then too not able to clear data fully..
even after clearing data my data is fulled upto 136 mb... now i am not able to install any rom.... just using jaggy rom 4.1 with reverse mounting it..
Anyone has any perfect solutions... that how to hard reset ut phone....

y dont u partition ur sd card n use memory scripts? ..

[Q] htc explorer A310e

i am new user....
i use htc explorer A310e and cm9 rom .when i installed it and reboot then every thing is ok but my contect.com stop ........android process .com stop and 1 st boot i saw my internal memory 10 mb what i do plz help me

Check out my signature, for 'nand recovery procedure'

jd patel said:
i am new user....
i use htc explorer A310e and cm9 rom .when i installed it and reboot then every thing is ok but my contect.com stop ........android process .com stop and 1 st boot i saw my internal memory 10 mb what i do plz help me
Click to expand...
Click to collapse
have u wiped everything????if not then go into recovery wipe data cache and dalvik cache then flash the rom....

jd patel said:
i am new user....
i use htc explorer A310e and cm9 rom .when i installed it and reboot then every thing is ok but my contect.com stop ........android process .com stop and 1 st boot i saw my internal memory 10 mb what i do plz help me
Click to expand...
Click to collapse
1. Wipe Data/ Factory Reset
2. Wipe Cache
3. Wipe Dalvik Cache
If you perform the three steps above and then install the ROM, it should be fine.
Try another ROM - Evervolv ICS, CM10, AOKP are a few to mention in AOSP.
If the issue is same or it fails to install, then its a Burnt Nand. Follow the instructions given here:
http://forum.xda-developers.com/showpost.php?p=38098622&postcount=13
Since you are new i would recommend not to overclock the phone. Make sure you read the features and changelogs of every ROM you install so that you ensure its not overclocked.

use CWM recovery and wipe everything except sdcard then once reboot in recovery then install ur rom... then restart

[Q] backed up my efs folder but...!!!

HI,
I have done backup of efs partition and as well as the folder as dhiru1602 mentioned in his thread
do i need to do any thing else before flashing the latest builds..??
what are the chances that i will get back my efs if i ever lost it...???
wating for the reply
thanx guys..!!

Where are you now! 2.3.6 or cm10 or cm10.1.
Sent from my GT-I9003 using xda app-developers app

Now iam on flyon gb by lolation....!!!
Sent from my GT-I9003 using xda premium

abhu said:
Now iam on flyon gb by lolation....!!!
Sent from my GT-I9003 using xda premium
Click to expand...
Click to collapse
Well, you have cwm. Backup all your contact, call logs, sms. I use Super Backup for this.
Copy the 4.3 rom in ext. sd card. I'm using Carbon now.
Copy the 4.3 gapps in ext. card.
Go to cwm recovery.
Backup your current system in ext. sd card
Install rom zip from ext. card.
Phone will reboot into new cwm.
Mount internal and external sd cards. ( to avoid status 7 error)
Install the rom zip again. This time it will actually install the rom.
Install the gapps zip.
Clear cache, delvic
Reboot.
It will take few minutes to complete the boot.
Welcome to cm 10.2 A3.

sam_777 said:
Well, you have cwm. Backup all your contact, call logs, sms. I use Super Backup for this.
Copy the 4.3 rom in ext. sd card. I'm using Carbon now.
Copy the 4.3 gapps in ext. card.
Go to cwm recovery.
Backup your current system in ext. sd card
Install rom zip from ext. card.
Phone will reboot into new cwm.
Mount internal and external sd cards. ( to avoid status 7 error)
Install the rom zip again. This time it will actually install the rom.
Install the gapps zip.
Clear cache, delvic
Reboot.
It will take few minutes to complete the boot.
Welcome to cm 10.2 A3.
Click to expand...
Click to collapse
but my question is if i lost the efs folder can a restore it back...???

You have followed dhiru1602 thread for efs backup. You will be able to restore it.
As I know this efs cocked up when you flash 4.2 or 4.3 over ICS.
We used to flash 4.2 and 4.3 over GB not on ICS.
Go ahead. Good thing will happen. We all are still alive and enjoying 4.3.
Good luck and welcome to cm 10.2 A3.

sam_777 said:
You have followed dhiru1602 thread for efs backup. You will be able to restore it.
As I know this efs cocked up when you flash 4.2 or 4.3 over ICS.
We used to flash 4.2 and 4.3 over GB not on ICS.
Go ahead. Good thing will happen. We all are still alive and enjoying 4.3.
Good luck and welcome to cm 10.2 A3.
Click to expand...
Click to collapse
THAnx mate...!!!

[Solved] CM11 Beta 4 Unfortunately, the process android.process.media has stopped

Hey guys, I flashed CM11-beta4 ROM with OC (system:500MG, Cache:199MG, ext:3GB) and I install my apps and i applied a CM11 theme and made the notification bar transparent (with editing build.prop), without using ART and everything was working perfectly before rebooting the mobile and : ~"Unfortunately, the process android.process.media has stopped" started to appear
~when I try to open Downloads the same error appear and the app doesn't open
~when I try to take a screen-shot it just say saving and never save it
what I tried: I tried wipe cache, dalvik cache, app data, even wiping my SD-Card and reinstalling the same rom again
*after installing the ROM with OC I didn't installed gapps core because Google apps was already installed
if any one faced this problem please reply to me
sorry for not posting it in the ROM thread, I can't post it their as my total posts less that 10 (XDA rules)

daser4ever96 said:
Hey guys, I flashed CM11-beta4 ROM with OC (system:500MG, Cache:199MG, ext:3GB) and I install my apps and i applied a CM11 theme and made the notification bar transparent (with editing build.prop), without using ART and everything was working perfectly before rebooting the mobile and : ~"Unfortunately, the process android.process.media has stopped" started to appear
~when I try to open Downloads the same error appear and the app doesn't open
~when I try to take a screen-shot it just say saving and never save it
what I tried: I tried wipe cache, dalvik cache, app data, even wiping my SD-Card and reinstalling the same rom again
*after installing the ROM with OC I didn't installed gapps core because Google apps was already installed
if any one faced this problem please reply to me
sorry for not posting it in the ROM thread, I can't post it their as my total posts less that 10 (XDA rules)
Click to expand...
Click to collapse
Simple solution buddy switch to dalvich ART is still under test.. Even google is testing it..
I tried switching to ART in my case 2-3 apps were crashing and even the lock screen wasnt responding..

shubhojit89 said:
Simple solution buddy switch to dalvich ART is still under test.. Even google is testing it..
I tried switching to ART in my case 2-3 apps were crashing and even the lock screen wasnt responding..
Click to expand...
Click to collapse
I tried ART before it was so lagy and it took too much time to switch 150+ app
everything was working perfectly until the reboot, I just want to know what happed to the download manger to stop working

daser4ever96 said:
I tried ART before it was so lagy and it took too much time to switch 150+ app
everything was working perfectly until the reboot, I just want to know what happed to the download manger to stop working
Click to expand...
Click to collapse
Tell me the things which you did before rebooting..

Solved ^_^
by unmounting SD-Card from setting>storage and mounting it again ^_^

shubhojit89 said:
Tell me the things which you did before rebooting..
Click to expand...
Click to collapse
I flashed CM11-beta4 ROM with OC (system:500MG, Cache:199MG, ext:3GB) and I install my apps and i applied a CM11 theme and made the notification bar transparent (with editing build.prop), without using ART and everything was working perfectly before rebooting the mobile and "Unfortunately, the process android.process.media has stopped" started to appear
I tried to unmounting SD-Card from setting>storage and mounting it again it works but once I reboot it appear again
is their is any app/solution to make it stop appearing or even unmounting SD-Card and mounting it again at the start of the device ?
thank you for you help

daser4ever96 said:
I flashed CM11-beta4 ROM with OC (system:500MG, Cache:199MG, ext:3GB) and I install my apps and i applied a CM11 theme and made the notification bar transparent (with editing build.prop), without using ART and everything was working perfectly before rebooting the mobile and "Unfortunately, the process android.process.media has stopped" started to appear
I tried to unmounting SD-Card from setting>storage and mounting it again it works but once I reboot it appear again
is their is any app/solution to make it stop appearing or even unmounting SD-Card and mounting it again at the start of the device ?
thank you for you help
Click to expand...
Click to collapse
Change your recovery..
Your recovery is not mounting the partition..

shubhojit89 said:
Change your recovery..
Your recovery is not mounting the partition..
Click to expand...
Click to collapse
I'm sorry i know a little about mounting in recovery, how can i know ?, and how to deal with it ?
But i think it is not for the recovery cuz i did not open it after flashing the rom.

daser4ever96 said:
I'm sorry i know a little about mounting in recovery, how can i know ?, and how to deal with it ?
But i think it is not for the recovery cuz i did not open it after flashing the rom.
Click to expand...
Click to collapse
Make your partition again and a new kernel is available with two partitions..
And flash the oc kernel after setting up..
Change to TWRP recovery..
Just change and tell me..

shubhojit89 said:
Make your partition again and a new kernel is available with two partitions..
And flash the oc kernel after setting up..
Change to TWRP recovery..
Just change and tell me..
Click to expand...
Click to collapse
Okey, thank you :laugh:
I will try it now and tell you the results.

shubhojit89 said:
Make your partition again and a new kernel is available with two partitions..
And flash the oc kernel after setting up..
Change to TWRP recovery..
Just change and tell me..
Click to expand...
Click to collapse
Am i have to wipe the 3-ext ?
Am i have to use TWRP ?

daser4ever96 said:
Am i have to wipe the 3-ext ?
Am i have to use TWRP ?
Click to expand...
Click to collapse
Create 3 partitions sd main your card for storage.. sd data ( 1gb ) sd cache 100 mb..
You can't create 3 partition through recovery specially cache..
So use mini tool..
Sd main fat32
Sd data ext4/3 1gb or more ..
Sd cache ext4/3 100 mb
Sd data and cache should be same like ext 4 both should be ext 4..
All should be primary partition..
via xda premium app

shubhojit89 said:
Create 3 partitions sd main your card for storage.. sd data ( 1gb ) sd cache 100 mb..
You can't create 3 partition through recovery specially cache..
So use mini tool..
Sd main fat32
Sd data ext4/3 1gb or more ..
Sd cache ext4/3 100 mb
Sd data and cache should be same like ext 4 both should be ext 4..
All should be primary partition..
via xda premium app
Click to expand...
Click to collapse
I mad 3.5GB SD-Ext and 100MB SD-Cashe with ADB and now the ROM is working perfectly, But when I used the max. performance (878MHz) it rebooted when I was using torrent, xda app, play store together
Sent from my Explorer A310e using XDA Premium 4 mobile app

daser4ever96 said:
I mad 3.5GB SD-Ext and 100MB SD-Cashe with ADB and now the ROM is working perfectly, But when I used the max. performance (878MHz) it rebooted when I was using torrent, xda app, play store together
Sent from my Explorer A310e using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Your phone doesn't support 878 so it went to bootloop make it to 722 use no frills CPU to set it..
Hit thanks if I really helped you..
via xda premium app

ART problem
I too used art instead of dalvik after flashing with CM11 my phone rebooted and it stuck in a boot loop what shall I do?

krushnach80 said:
I too used art instead of dalvik after flashing with CM11 my phone rebooted and it stuck in a boot loop what shall I do?
Click to expand...
Click to collapse
Do not use ART it is not recommended until now as Google say

I was happily using the rom for couple a weeks now without any problem when suddenly while updating whatsapp my phone restarted and i started getting the android.process.media has stopped working errors. they started appearing upon opening any app. i finally got rid of it by rebooting after removing my battery [seems to work dont know why] but now i cannot install any new apps as the rom again reboots mid install.
what shud i do?

YedaAnna said:
I was happily using the rom for couple a weeks now without any problem when suddenly while updating whatsapp my phone restarted and i started getting the android.process.media has stopped working errors. they started appearing upon opening any app. i finally got rid of it by rebooting after removing my battery [seems to work dont know why] but now i cannot install any new apps as the rom again reboots mid install.
what shud i do?
Click to expand...
Click to collapse
Create partition through recovery and install.. then flash the Rom or restore the apps..
via Apache Helicopter

shubhojit89 said:
Create partition through recovery and install.. then flash the Rom or restore the apps..
via Apache Helicopter
Click to expand...
Click to collapse
I already have a 1gb partition acting as my internal. should i just re flash the rom [will it format my internal?]. i have a lot of apps installed ... dont want to lose them

YedaAnna said:
I already have a 1gb partition acting as my internal. should i just re flash the rom [will it format my internal?]. i have a lot of apps installed ... dont want to lose them
Click to expand...
Click to collapse
Backup your apps through titanium then reflash the Rom ..
via Apache Helicopter