Database Info

help needed for cm9.1...

thanq for viewing ma thread.. i moderate noob cz i researched many things about rooting, flashing, etc., but still i have some confusions..
basically i rooted my htc explorer with jaggy rooting tutorial. so now i want to flash with [DEV][ROM][ICS][4.0.4][IMM76L]Unofficial CyanogenMod 9.1 for Pico Build#9 {3/11/2012} rom.. buti have somedoubts pls kindly clarify me..
1. is there any problem with cm9.1. i read that it drain in half a day even in normal use.. is that true..
2. now i have Yannou's recovery..can i flash thru that..
3. before flashing should i partition ma sd card or can we do dat after flashin?? if i should do partition which is best ext2/3/4 or fat32. now ma sd card isnt partitioned once also. so can i do before flashing then after have to move cm9.1 rom zip file to sd card.
4. i read that partition can also be done with recovery menu.. is that true. if yes. how to do that.. i read partition for s2e(http://forum.xda-developers.com/showthread.php?t=1859691- here) what about link2sd.. can we partion for link2sd by(http://forum.xda-developers.com/showpost.php?p=29724634&postcount=3 ) with that can we do.. will it work for cm9.1.
5. i read instruction for for flashing cm9.1 rom. there are two different methods which one to follow.
Installation
First time installing CyanogenMod 9 to your Htc Explorer/Pico, or coming from another ROM:
- Make sure you're running a proper working ClockworkMod-Recovery
- Copy GApps and CM9 ZIPs to your SDCard
- Boot into Recovery
- Flash CM9 zip from SDCard
- Flash GApps zip from SDCard
- DO A DATA WIPE / FACTORY RESET (otherwise your device will be stuck at boot)
- Reboot
- Don't restore data using Titanium Backup! they might cause FC's
- Restoring Apps + Data might cause problems and is not recommended, avoid it if possible! (metioned in http://forum.xda-developers.com/showthread.php?p=29938916) or (http://forum.xda-developers.com/showpost.php?p=33608084&postcount=2897).
please help me.. waitin for ua valuble reply..

Guide
Hey there
1. The battery life depends on how you use your phone. If you’re connected to a 3G network all day while playing or watching videos, the battery won’t last that long. For casual everyday use, the battery is great. I didn’t charge it for 2 days once
2. Yes, you can flash through yannou’s recovery but it would be ideal if you flash CWM recovery since it’s recommended. If you partition your sd card, it will be automatically formatted so its best if you back up your data, partition the sd card and then copy all the files. You can partition using CWM and then install Link2sd which, when opened, it will prompt you with the file system of your sd ext. Choose ext3 and reboot. The partition itself isn’t needed for cm9.1 but you can you a2sd scripts if you’re partitioned.
3. To flash it, download the rom and gapps. Put them in the sdcard. Then boot into recovery, wipe data/factory reset, go to advanced -> wipe dalvik. Then install zip from sd card and find the rom. After you flash the rom, flash the gapps and reboot. Give it a few minutes since the first boot takes some time. And there you go
_______________________________________________________________________________________________________________________
Remember to hit the thanks button! It won’t hurt, I promise

bijgu said:
Hey there
1. The battery life depends on how you use your phone. If you’re connected to a 3G network all day while playing or watching videos, the battery won’t last that long. For casual everyday use, the battery is great. I didn’t charge it for 2 days once
2. Yes, you can flash through yannou’s recovery but it would be ideal if you flash CWM recovery since it’s recommended. If you partition your sd card, it will be automatically formatted so its best if you back up your data, partition the sd card and then copy all the files. You can partition using CWM and then install Link2sd which, when opened, it will prompt you with the file system of your sd ext. Choose ext3 and reboot. The partition itself isn’t needed for cm9.1 but you can you a2sd scripts if you’re partitioned.
3. To flash it, download the rom and gapps. Put them in the sdcard. Then boot into recovery, wipe data/factory reset, go to advanced -> wipe dalvik. Then install zip from sd card and find the rom. After you flash the rom, flash the gapps and reboot. Give it a few minutes since the first boot takes some time. And there you go
_______________________________________________________________________________________________________________________
Remember to hit the thanks button! It won’t hurt, I promise
Click to expand...
Click to collapse
did u use CM9.1 .
is flashing process is same for yannou’s recovery.
i know about yannou’s recovery.. but what about CWM recovery.. from where i can get dat.. cus jaggy flashing process providing only yannou’s recovery.. so how can i shift to CWM recovery..

bijgu said:
Hey there
1. The battery life depends on how you use your phone. If you’re connected to a 3G network all day while playing or watching videos, the battery won’t last that long. For casual everyday use, the battery is great. I didn’t charge it for 2 days once
2. Yes, you can flash through yannou’s recovery but it would be ideal if you flash CWM recovery since it’s recommended. If you partition your sd card, it will be automatically formatted so its best if you back up your data, partition the sd card and then copy all the files. You can partition using CWM and then install Link2sd which, when opened, it will prompt you with the file system of your sd ext. Choose ext3 and reboot. The partition itself isn’t needed for cm9.1 but you can you a2sd scripts if you’re partitioned.
3. To flash it, download the rom and gapps. Put them in the sdcard. Then boot into recovery, wipe data/factory reset, go to advanced -> wipe dalvik. Then install zip from sd card and find the rom. After you flash the rom, flash the gapps and reboot. Give it a few minutes since the first boot takes some time. And there you go
_______________________________________________________________________________________________________________________
is it necessary to wipe dalvik bcause i didnt do it and it works fine
Click to expand...
Click to collapse

No, no, stick with yannou's! Official cwm sometimes give's mounting issues with our phone, and sometimes if you drain fully your battery you'll get in to adventure.
Yes flashing process is the same, basikly everything is the same as cwm

Install ROM Manager on your phone and the first option should be to install Clockworkmod Recovery. Follow the instructions on screen. I'd use yannou's recovery though.
Yes, the instructions are the same for yannou's recovery.
And yes, I've used cm9.1 for over 2 months. I'm using HTC sense 4.0a rom by derefas right now
Remember to hit the thanks button! It won’t hurt, I promise

cool
shree alwaz said:
thanq for viewing ma thread..
Click to expand...
Click to collapse
Here is my opinion and instruction
1. is there any problem with cm9.1. i read that it drain in half a day even in normal use.. is that true..
Click to expand...
Click to collapse
I am not sure about the build #9 but build #11 is really cool.. Here is the link. U also get the link form the post u mention above under the page 305
http://teamthundersquad.blogspot.in/2012/11/cm-9-nightly-build-11-for-htc-explorer.html
But as far i heard nothing wrong with build#9 too. So try both..
Click to expand...
Click to collapse
2. now i have Yannou's recovery..can i flash thru that..
Click to expand...
Click to collapse
Nothing serious with this matter. Almost all recovery will work with this ROM. But my opinion is use TWRP recovery, it provide lot of feature also its provide touch support and ext partition support also....
Click to expand...
Click to collapse
3. before flashing should i partition ma sd card or can we do dat after flashing?? if i should do partition which is best ext2/3/4 or fat32. now ma sd card isnt partitioned once also. so can i do before flashing then after have to move cm9.1 ROM zip file to SD card.
Click to expand...
Click to collapse
its depends upon Ur need man. If Ur going to use internal memory increasing script u must have an 2nd partition in Ur SD card. ext2/3/4 is depend upon the memory script and ROM Ur going to use..
My Suggestion:
Try m2sd script with ext4 partition its work like a charm.. but i read from some post ext4 will damage SD sooner. but perform better. i am always need performance. but i am sure that till now no damage or performance issue occurred in my SD card as well as phone.
before or after partition is ur choice when u need partition u do it. But some ROM need 2nd partition while flashing be careful on that but cm9.1 doesn't need any support from sd card
Click to expand...
Click to collapse
5. i read instruction for for flashing cm9.1 rom. there are two different methods which one to follow.
Installation
Click to expand...
Click to collapse
Both the instruction telling the same thing for u. Here is my guide as same like they stated...
1.copy Ur ROM and GAPPS zip to ur SD-card
2.wipe all the partition data,cache,system,dalvik,etc... except SD-card
3.install ROM zip then install GAPPS zip.
4.Then reboot..
5.wait until u get the home screen.. first boot take some time so be patient
6.After that leave Ur phone for a minute then once again restart Ur phone.
7. final but important click thanks to the Developer and other who help u to install the ROM successfully..
this instruction is for clean installation this will never lead Ur device to problem
Click to expand...
Click to collapse

thanq u all.. but i have some clarification about partiton only.. can anybody give me guide about partitons for CM9.1 . which is best, simple and error free, wheather to go partition then flashing or flashing then partition.. and plz give me guide thru recovery.. and where its pre or post flashing.. pls do needful..

edit :
im unable to figure it out abot s2e scripts, int2sd scripts.. so please tell me actually what are those and how the linked with ext2/3/4 partitioms..

Its simple if ur using recovery for partition u will lose all the data in SD card. So use mini partition wizard tool for make partition.. after or before flashing is does not matter if u going to add memory script then partition memory card... then add the rom zip then flash it..
Sent from my HTC Explorer A310e using xda app-developers app

As much as i remember, Older builds of CM9.1 had battery drain problems. It has been rectified in the latest builds (Aleast have been rectified in build 10 and 11)
I say you go for CM9.1 Build 11 by ayushrox. I am using it right now. I run my phone with extensive Music usage for 1 and half to 2 days. I have once kept my phone running without charge for 3 days. Right now as i type, i am off the charger for 12 hours, still i have 55% battery remaining, this is good for me, as i use an always on internet.
I never used CWM. I use a different recovery (i dont know its name), and i flash using it successfully.
I use Link2SD with a partition i made BEFORE the installation. I use Minitool Partition Wizard to create partitions. It is for Windows.
I always ask people to do a clean install. This would eradicate any issues in the future.

vasanth3008 said:
Its simple if ur using recovery for partition u will lose all the data in SD card. So use mini partition wizard tool for make partition.. after or before flashing is does not matter if u going to add memory script then partition memory card... then add the rom zip then flash it..
Sent from my HTC Explorer A310e using xda app-developers app
Click to expand...
Click to collapse
Can u explain what are those sd scripts. What it'll do with the partition. Plz explain me.
Sent from my HTC Explorer A310e using xda app-developers app

tatiraju.rishabh said:
As much as i remember, Older builds of CM9.1 had battery drain problems. It has been rectified in the latest builds (Aleast have been rectified in build 10 and 11)
I say you go for CM9.1 Build 11 by ayushrox. I am using it right now. I run my phone with extensive Music usage for 1 and half to 2 days. I have once kept my phone running without charge for 3 days. Right now as i type, i am off the charger for 12 hours, still i have 55% battery remaining, this is good for me, as i use an always on internet.
I never used CWM. I use a different recovery (i dont know its name), and i flash using it successfully.
I use Link2SD with a partition i made BEFORE the installation. I use Minitool Partition Wizard to create partitions. It is for Windows.
I always ask people to do a clean install. This would eradicate any issues in the future.
Click to expand...
Click to collapse
After partition how to make scrpits for partition. Plz I heard that int2sd, mount2sd sripts. What are those.
Sent from my HTC Explorer A310e using xda app-developers app

shree alwaz said:
After partition how to make scrpits for partition. Plz I heard that int2sd, mount2sd sripts. What are those.
Sent from my HTC Explorer A310e using xda app-developers app
Click to expand...
Click to collapse
I have never used Mount2SD and int2sd
When you create a partition in your memory card, open Link2SD. Link2SD will ask you the partition type, select and tap ok. The app creates mount script by itself.
Link2SD is a 500KB app at the Play Store.

tatiraju.rishabh said:
I have never used Mount2SD and int2sd
When you create a partition in your memory card, open Link2SD. Link2SD will ask you the partition type, select and tap ok. The app creates mount script by itself.
Link2SD is a 500KB app at the Play Store.
Click to expand...
Click to collapse
So which is best link2sd or mount2sd for cm9.1 built 11. Can do parttion after flashing cm9.1. My doubt is if I flash the rom then Rom considers the memory of 150mb. So then after if I make patition will it change its internal memory from 150mb to partitioned memory. Pls. Explain me. Anyone.
Sent from my HTC Explorer A310e using xda app-developers app

Nobody don't know about ma query. Help me guys.
Sent from my HTC Explorer A310e using xda app-developers app

tatiraju.rishabh said:
As much as i remember, Older builds of CM9.1 had battery drain problems. It has been rectified in the latest builds (Aleast have been rectified in build 10 and 11)
I say you go for CM9.1 Build 11 by ayushrox. I am using it right now. I run my phone with extensive Music usage for 1 and half to 2 days. I have once kept my phone running without charge for 3 days. Right now as i type, i am off the charger for 12 hours, still i have 55% battery remaining, this is good for me, as i use an always on internet.
I never used CWM. I use a different recovery (i dont know its name), and i flash using it successfully.
I use Link2SD with a partition i made BEFORE the installation. I use Minitool Partition Wizard to create partitions. It is for Windows.
I always ask people to do a clean install. This would eradicate any issues in the future.
Click to expand...
Click to collapse
Previously i flashed cm 9.1 build 11 by ayushrox but it was giving me some problems 1.wifi was not working it always showed an error 2.when i tried to reboot or switch off my cell it used to get hang so i had to remove and re insert battery to make it work ... now i've switched back to build 9 and its running fine except for the video i record have no sounds in them but thats ok for me coz i usually dnt use my cell camera

help
please temme. today i wanna flash the cm 9.1. plz temme which is best built9 or 11.. what do u people say which is best for daily use, all things should work, games should support like backstab, shadowgun, nfs mostwanted like that.. and it should not drain fast.
n i wanna make partition of ma 8GB class4 sd card before flashing using mini partiton tool. so which is best ext2/3/4 or fat32. n which is best link2sd, mount2sd or anything else. and i no need to create/modify/change the mounts for those apps to use.. cz im not able to figure out what is that mounts acctually. n what is the use of those mount. if anybody explains about those im very much gladful.
n before partition i need to take backup.. it mean i need just copy paste the all the folder which are there in sd card.. its that correct or any method to use.. to get backup.
finally give me exact intraction to flash.. consider i had partiton sd card..
pls help.. ill make flash n wanna eat icecream sandwich today it self.. :crying:

ZaKa123 said:
Previously i flashed cm 9.1 build 11 by ayushrox but it was giving me some problems 1.wifi was not working it always showed an error 2.when i tried to reboot or switch off my cell it used to get hang so i had to remove and re insert battery to make it work ... now i've switched back to build 9 and its running fine except for the video i record have no sounds in them but thats ok for me coz i usually dnt use my cell camera
Click to expand...
Click to collapse
I never had any of those problems.
---------- Post added at 05:56 PM ---------- Previous post was at 05:48 PM ----------
shree alwaz said:
So which is best link2sd or mount2sd for cm9.1 built 11. Can do parttion after flashing cm9.1. My doubt is if I flash the rom then Rom considers the memory of 150mb. So then after if I make patition will it change its internal memory from 150mb to partitioned memory. Pls. Explain me. Anyone.
Sent from my HTC Explorer A310e using xda app-developers app
Click to expand...
Click to collapse
I never used Mount2SD and never will, cos link2sd works well for me.
Here is what i did:
1. Partition microSD with format ext2. (I used Minitool Partition Wizard for this. A freeware program for Windows)
2. Insert it in the phone, download Link2SD from Play Store.
3. Open Link2SD, it will prompt you to select your partition type. Select ext2.
4. Link2SD will create a mount script and ask you to restart the phone. Do so.
5. After restart, go back to Link2SD, press menu button to open menu.
6. Open "Settings". Make sure "Auto link" is ticked.
7. Exit Link2SD, do a restart.
Thats it! now whenever i install an app, Link2SD sends it to the partition automatically.
Sometimes you may get a phone memory full notification. In that case power off your phone and on it again.
EDIT: all this was done with CM9.1 previously installed.

So what are steps to install cm9.1.
Is it necessary to clear dalvik cache.
Sent from my HTC Explorer A310e using xda app-developers app

[Q] Google Play Problem

Hi guys,
I am facing a problem with my google play everytime that i try to install or update something i get the message saying that my internal storage is full, but i 'm on JANA 6.7 and i have 60+mb of free internal space, i already tried to clean data but no sucess till now, can someone please help me?

Haluki_BR said:
Hi guys,
I am facing a problem with my google play everytime that i try to install or update something i get the message saying that my internal storage is full, but i 'm on JANA 6.7 and i have 60+mb of free internal space, i already tried to clean data but no sucess till now, can someone please help me?
Click to expand...
Click to collapse
I had this problem app specific...like themes & launchers werent gettng downloaded...
Sent from my GT-S5670 using xda premium

Haluki_BR said:
Hi guys,
I am facing a problem with my google play everytime that i try to install or update something i get the message saying that my internal storage is full, but i 'm on JANA 6.7 and i have 60+mb of free internal space, i already tried to clean data but no sucess till now, can someone please help me?
Click to expand...
Click to collapse
i didnt fced such problem
just
boot to cwm
wipe data
wipe cache
wipe dalvik cache
format system
mount system
install
reboot
if still facing the problem
do one thing
open the zip file in pc or lap
open system/apps
delete the apk file of play store.. ...the name is vending.apk
replace with any other apk file of playstore
thrn
flash that zip of rom and see
Press Thanx if i helped u

Crytech007 said:
I had this problem app specific...like themes & launchers werent gettng downloaded...
Sent from my GT-S5670 using xda premium
Click to expand...
Click to collapse
I donw know why this is happening, but i dont wanna to install the rom again ( doing wipes and loosing my data and apps ) D:

Try wiping dalvik cache
It doesnt lose any data
Sent from my GT-S5670 using xda app-developers app

[Q] All processes force closing after restart

hey guys, I am facing a weird problem. Whenever I restart my phone all processes stop working on boot and then I have to reflash Rom again. And this is happening with most of the ROMs in which I am using S2E app. Anybody knows how to solve this.

[email protected] said:
hey guys, I am facing a weird problem. Whenever I restart my phone all processes stop working on boot and then I have to reflash Rom again. And this is happening with most of the ROMs in which I am using S2E app. Anybody knows how to solve this.
Click to expand...
Click to collapse
Use link2sd app and mount script as ext3/4 then reboot..dont use S2E
And about your force closes can u be specific? Or can u elaborate? I think u havent wiped cache and dalvik cache

Raj joshi said:
Use link2sd app and mount script as ext3/4 then reboot..dont use S2E
And about your force closes can u be specific? Or can u elaborate? I think u havent wiped cache and dalvik cache
Click to expand...
Click to collapse
Bro, I do wipe cache and dalvik cache, but when i again use recovery to install any other thing and reboot then it happens, and by process closing I mean literally all process stops working (Launcher, all sys apps) and I am shown with force close option, Whad do u think of it?:crying: For time being I have reflashed Stock Rom, pleaes do suggest me which rom shall i use. I am moderate gamer.

[email protected] said:
Bro, I do wipe cache and dalvik cache, but when i again use recovery to install any other thing and reboot then it happens, and by process closing I mean literally all process stops working (Launcher, all sys apps) and I am shown with force close option, Whad do u think of it?:crying: For time being I have reflashed Stock Rom, pleaes do suggest me which rom shall i use. I am moderate gamer.
Click to expand...
Click to collapse
Bro! As Raj Joshi said, always use link2sd. I'm also using it & remove similar apps(if any) as they may conflict with each other. And don't link dalvik cache of apps to sd-ext.
Sent Via XDA™ Premium

[Q] chacha rom

hey guys
i have a little problem
I have installed Cm10.1 on my chacha it worked alright but no ROM manager was exist and i couldn't create mount script for LINK2SD app
so i tried to install ROM manager manually but the app didn't open the device is force close it
so i deleted all the system and installed the ROM again and now two new problems added the first when i put the USB cable in the PC nothing shows in the status bar and i cant open my SD card on PC
second the internet browser don't work anymore
I need help in that ????!!!???

Majd19999 said:
hey guys
i have a little problem
I have installed Cm10.1 on my chacha it worked alright but no ROM manager was exist and i couldn't create mount script for LINK2SD app
so i tried to install ROM manager manually but the app didn't open the device is force close it
so i deleted all the system and installed the ROM again and now two new problems added the first when i put the USB cable in the PC nothing shows in the status bar and i cant open my SD card on PC
second the internet browser don't work anymore
I need help in that ????!!!???
Click to expand...
Click to collapse
You should reflash the ROM and wipe cache and data. For the mounting script I suggest Cronmod

I tried that more than once still the same
swashie said:
You should reflash the ROM and wipe cache and data. For the mounting script I suggest Cronmod
Click to expand...
Click to collapse

tell me exactly how to reflash the rom with the steps
I tried everything!!

Reboot issue

I'm using CyanogenMod 10.2 Weekly Builds - 12/11/2013 on HTC Explorer(pico) .From some days whenever i install any app from playstore or from apk file, phone reboots itself.After the reboot app gets installed. I've tried to fix permissions, but it fails saying- "Can;t check permissions after factory reset".
Someone plz some soln.

Wipe Everything maually
crazy_gagan said:
I'm using CyanogenMod 10.2 Weekly Builds - 12/11/2013 on HTC Explorer(pico) .From some days whenever i install any app from playstore or from apk file, phone reboots itself.After the reboot app gets installed. I've tried to fix permissions, but it fails saying- "Can;t check permissions after factory reset".
Someone plz some soln.
Click to expand...
Click to collapse
Do thiis:
1. Wipe data/factory reset.
2. Wipe cache partition.
3. Go to advanced - > Wipe dalvich cache.
4. Go to mounts and storage-> Format everything except your card
5. Now install rom and gapps.
6. If you to increase memory use mounts2sd or int2 ext script.

Can i restore my previous nandroid backup of same ROM & restore data after wiping data/ROM

crazy_gagan said:
Can i restore my previous nandroid backup of same ROM & restore data after wiping data/ROM
Click to expand...
Click to collapse
Yes you can..

But isn't that data have some issues currently which rom is using & if i restore it the problem will still be there.
Plz correct me if wrong.

crazy_gagan said:
But isn't that data have some issues currently which rom is using & if i restore it the problem will still be there.
Plz correct me if wrong.
Click to expand...
Click to collapse
The problem is not with your data the problem is with your data partition..
While taking backup it took backup of your present apps not the overlapped ones.

I restored nandroid backup,after wiping everything except sdcard ,bt got no success.Still phone reboots.
Should i flash rom after deleting & recreating ext4 partition or just wiping everything except sd card?

crazy_gagan said:
I restored nandroid backup,after wiping everything except sdcard ,bt got no success.Still phone reboots.
Should i flash rom after deleting & recreating ext4 partition or just wiping everything except sd card?
Click to expand...
Click to collapse
Create partition through recovery..
via Apache Helicopter

I partitioned sd card using recovery(ext4 partn). After that installed about 30 apps,till then it have no issues.But later the problem still arrives.Suggest some soln or some other ROM.

crazy_gagan said:
I partitioned sd card using recovery(ext4 partn). After that installed about 30 apps,till then it have no issues.But later the problem still arrives.Suggest some soln or some other ROM.
Click to expand...
Click to collapse
Put int2ext script in system/etc/init.d with permission rwxrwxrwx then restart your phone then install apps I think its happening due to memory problem..
Make at least 1 or 2 GB ext partition..
via Apache Helicopter

Ohh gosh this problem is too frustating and becomes headache 4 me.
I changed the permissions as told by u i.e- Owner, Group, Others all 3 to rwx. After rebooting 1 app installs ok ,but 2nd app results to same problem. Plz suggest some tips.Oderwse suggest some other rom(4.3+)

crazy_gagan said:
Ohh gosh this problem is too frustating and becomes headache 4 me.
I changed the permissions as told by u i.e- Owner, Group, Others all 3 to rwx. After rebooting 1 app installs ok ,but 2nd app results to same problem. Plz suggest some tips.Oderwse suggest some other rom(4.3+)
Click to expand...
Click to collapse
Use galaxyfreaks ROM cm 10.2 weekly.. I m presently using it..
If you don't want to replacing and all put the script in the rom zip then flash the ROM..
For more performance use pure performance after installing all apps..
CHECK THIS ONE ITS ALSO 4.3.1:http://forum.xda-developers.com/showthread.php?t=2391853 THIS ROM IS ALSO BUG FREE.
via Apache Helicopter

Thanks, but i'm using the same Rom(cm 10.2 weekly 9) on pico which is causing reboot issue.I will try cm 10.2 rom by sakindia. Is it fully stable & fast like this rom?

crazy_gagan said:
Thanks, but i'm using the same Rom(cm 10.2 weekly 9) on pico which is causing reboot issue.I will try cm 10.2 rom by sakindia. Is it fully stable & fast like this rom?
Click to expand...
Click to collapse
Yup its stable and fast just s2w and halo is not available..
Don't know why u r facing reboot cz I didn't face any..
It might be happening due to low ext partition if its 1 GB make it 2 see if that solves your problem..
Hit thanks if I helped u.
via Apache Helicopter

I think reboot issue is due to int2ext script .As when i flash cm 10.2 rom by sak & copy the script to sys ,phone gets strucked in cyanomd logo.
if it is true then suggest some other memory increasing script which is better(i have 1gb ext4 partitn).

Which recovery are you using?? If you are using CWM old version switch to TWRP or philz..
Use mounts2sd other than int2ext script..
How to configure it check This
Hit thanks if helped you..

I'm using TWRP 2.6.3.0 recovery.Btw is it safe to restore tb backup to other rom e.g.- i've backup of a game in cm 10.2 weekly bld 9 to restore in cm 10.2 by sak rom?

Yes
crazy_gagan said:
I'm using TWRP 2.6.3.0 recovery.Btw is it safe to restore tb backup to other rom e.g.- i've backup of a game in cm 10.2 weekly bld 9 to restore in cm 10.2 by sak rom?
Click to expand...
Click to collapse
Yes you can.. 1st restore the app then restore data of that game.. Dont select app+data..

Do u h've d link for swipe2wak zip, i used it mostly