Database Info

CM7 - WiFi Issue

WiFi worked no problem on stock 2.3.3, when i bought the phone. as soon as i put on cm7, my wifi never works. I can go into settings and turn it on, but it never prompts me to select an available network, and then automatically shuts off after about 30 seconds or so. I have continually update to the latest nightly, and wiped cache, yet it still has not fixed itself. any help would be greatly appreciated.

I had the same issue.
Sent from my butt using XDA Premium App

Try the RC and see if u get it working
If not, backup, wipe data + cache and do a fresh install of the latest nightly and seevif it works then
Sent from my LG-P999 using XDA App

cyanogenmod 10

after the flashing the last CM10 version (08.14. nk111).are unable to load my photos.I restored the CM9.The problem is the same.some ideas?
Thank you!

Look on your card are they still there? /sdcard/DCIM?
Consider copying data from card to PC, formatting card and then copying data back
Sywepd form my DsereiS

this works.
thank you!

restored cm10.I have not fotos.
restored cm 9.I have not fotos.
what is this???

acultr said:
restored cm10.I have not fotos.
restored cm 9.I have not fotos.
what is this???
Click to expand...
Click to collapse
Maybe some problems with your SD card. Try another.
Sent from my Desire S using Tapatalk 2

I use it more than a year.whitout problem. what you offer me?

acultr said:
I use it more than a year.whitout problem. what you offer me?
Click to expand...
Click to collapse
I dont know :/ Try just another SD for example. You neednt change for all the time!
Sent from my Desire S using Tapatalk 2

re-formatted the sd card.
now works.
interesting.!?Thanks.

I'm assuming it had something to do with Media Scanner not being given enough time to run properly. I've used both CM9 and CM10 and I have all pictures taken over the course of 1 year (with over 12-15 different roms) in the /sdcard/DCIM/Camera (or /DCIM/100ANDRO) folder.

Flashed the 13 Nov 2012 from NK111 formatted dalvik system data using recovery but system stuck on HTC logo, adb log shows looping any suggestion to consider since i see this same build worked for sony panel owners like me. Thanks
Sent from my HTC Desire S using xda app-developers app

emouawad said:
Flashed the 13 Nov 2012 from NK111 formatted dalvik system data using recovery but system stuck on HTC logo, adb log shows looping any suggestion to consider since i see this same build worked for sony panel owners like me. Thanks
Sent from my HTC Desire S using xda app-developers app
Click to expand...
Click to collapse
Are you htcdev unlocked or s-off
"I stopped fighting my inner demons, were on the same side now"

I unlocked with S-on where HBoot is 2.0, i guess that makes me htcdev unlocked; given that what should i do?
Sent from my HTC Desire S using xda app-developers app

Did you flash the boot.img ?
"I stopped fighting my inner demons, were on the same side now"

Ah I can't believe it was that easy!! Thanks a lot.. CM 10 and xda rocks
Sent from my Desire S using xda app-developers app

Standard Camera app not found
I flashed cm-10-20121116-EXPERIMENTAL-saga-NK111, when first booted i could see the standard camera app, took some photos, all great; but i realized later that i hadn't reflashed the GApps so back again to recovery mode i installed gapps-ics-20120429-signed but when i re-booted i couldn't find the camera App, so i tried restoring from titanium and got the 2.3.7 which i think is not compatible with CM10 since it is crashing even with the App cache cleaned; Finally i installed a 3rd party App from store: silent camera to test stuff and it loaded successfully and took photos; now how do i get the standard camera app of CM10 which i think is great?? Thanks

emouawad said:
I flashed cm-10-20121116-EXPERIMENTAL-saga-NK111, when first booted i could see the standard camera app, took some photos, all great; but i realized later that i hadn't reflashed the GApps so back again to recovery mode i installed gapps-ics-20120429-signed but when i re-booted i couldn't find the camera App, so i tried restoring from titanium and got the 2.3.7 which i think is not compatible with CM10 since it is crashing even with the App cache cleaned; Finally i installed a 3rd party App from store: silent camera to test stuff and it loaded successfully and took photos; now how do i get the standard camera app of CM10 which i think is great?? Thanks
Click to expand...
Click to collapse
you're flashing gapps-ics-20120429-signed? i think its for ICS, and you're using CM10 which is JB.
try gapps-jb-20121011-signed.zip

Ur probably right, the weird part is that everything is running smoothly and as expected, but what has the camera to do with gapps?! Has it..
Anyway downloading now to test it, thanks
Sent from my Desire S using xda app-developers app

emouawad said:
Ur probably right, the weird part is that everything is running smoothly and as expected, but what has the camera to do with gapps?! Has it..
Anyway downloading now to test it, thanks
Sent from my Desire S using xda app-developers app
Click to expand...
Click to collapse
Try to full wipe also before flashing the rom and gapps if you encounter problem.

Wifi unable to start on build 20121206
I upgraded to cm-10-20121206-EXPERIMENTAL-saga-NK111 from the previous build cleared dalvik and cache, but found out that the WiFi is unable to start. Restarting several times led to no solution.
So i did a clean install of this same build after formatting dalvik, cache, and data: still the WiFi unable to start!!!
Anybody encountered this before, and any solutions for this strange behavior please?

emouawad said:
I upgraded to cm-10-20121206-EXPERIMENTAL-saga-NK111 from the previous build cleared dalvik and cache, but found out that the WiFi is unable to start. Restarting several times led to no solution.
So i did a clean install of this same build after formatting dalvik, cache, and data: still the WiFi unable to start!!!
Anybody encountered this before, and any solutions for this strange behavior please?
Click to expand...
Click to collapse
Htcdev unlocked? Flashed the boot.img? (of the new version)

RemICS v1.6 mobile data issue

I have flashed with chinmay_7d's RemICS v1.6 . Yeak it looks cool, but I am facing an issue. When I turn on mobile data usage, the phone will turn off after some time (5-6 minutes) and it is not possible to turn on the phone again . It is needed to plug in it and turn on and then only it is working. In this condition, it is showing android is upgrading. There is no problem with using internet while plugged in. Anyone know how to fix this...? I like this ROM very much and so if it if fixed, then that will be cool.

are u coming from earlier versions of RemICS? followed all the installation steps?, go back to re-flash and tell us

tavomt said:
are u coming from earlier versions of RemICS? followed all the installation steps?, go back to re-flash and tell us
Click to expand...
Click to collapse
Yes I am .Actually this issue was with 1.5.4 also. I have followed all the steps and cleared dalvik Cache and formatted cache partition. I have even done the factory reset and wiped all apps. I think the issue is because, it is reading the battery profile incorrectly or battery is actually drained when mobile data is turned on and that is triggering switch off thing.

alwinaugustin said:
Yes I am .Actually this issue was with 1.5.4 also. I have followed all the steps and cleared dalvik Cache and formatted cache partition. I have even done the factory reset and wiped all apps. I think the issue is because, it is reading the battery profile incorrectly or battery is actually drained when mobile data is turned on and that is triggering switch off thing.
Click to expand...
Click to collapse
Not sure if I'm right, but I think the practical solution to your problem would be to perform a flash from 0 up KPQ or KPU (which are the most stable to install this ROM), it may be the modem or the base ROM you used (for 3 months I have this ROM and never gave me any problems with KPQ)
Another thing, have you tried testing with Dhiru CM9 Base? to see if the same thing happens?

alwinaugustin said:
Yes I am .Actually this issue was with 1.5.4 also. I have followed all the steps and cleared dalvik Cache and formatted cache partition. I have even done the factory reset and wiped all apps. I think the issue is because, it is reading the battery profile incorrectly or battery is actually drained when mobile data is turned on and that is triggering switch off thing.
Click to expand...
Click to collapse
Have you tried to fix permissions on CWM? I got some problems with it too. After fixing and installing 1.5.4 again no problem. Now I'm on 1.6 and all is fine...

@ tavomt :
I think I can directly flash to stock rom.

Please help me
sI have tried fix permission and after that also this issue persists.
Also I have flashed with CM10 alpha from dhiru. This is also showing the same behavior. :crying:
Now flashed with RemICS JB . But the issue is still there. :crying::crying::crying:
I think I need to go back to REMICS 1.0, as there is no issue on it. But I desperately like to use this ROM. If anyone has got a fix, please post and help me.
Sometimes, when I take apps also , the phone gone off (Google Currents and Angry bird )

alwinaugustin said:
Now flashed with RemICS JB . But the issue is still there. :crying::crying::crying:
Click to expand...
Click to collapse
What is your baseband version? Mine is xle4 and have no such problem using remics(kernel bam & chaos) and rem-jb. Try using 2g only for a day, and see if the problem still persist.
Sent from my GT-I9003 using xda app-developers app

issobuddy said:
What is your baseband version? Mine is xle4 and have no such problem using remics(kernel bam & chaos) and rem-jb. Try using 2g only for a day, and see if the problem still persist.
Sent from my GT-I9003 using xda app-developers app
Click to expand...
Click to collapse
my baseband version is I9003DDKP3 . Actually i am using 2G and use 2G network is already ticked

alwinaugustin said:
sI have tried fix permission and after that also this issue persists.
Also I have flashed with CM10 alpha from dhiru. This is also showing the same behavior. :crying:
Now flashed with RemICS JB . But the issue is still there. :crying::crying::crying:
I think I need to go back to REMICS 1.0, as there is no issue on it. But I desperately like to use this ROM. If anyone has got a fix, please post and help me.
Sometimes, when I take apps also , the phone gone off (Google Currents and Angry bird )
Click to expand...
Click to collapse
The issue you are facing is exclusive to you. So i will not consider this a bug from my ROM.
I suggest you to follow correct flashing procedure. Wiping data before flashing a new ROM is a good practice.
It is possible that a third party app you are using is responsible.
Sent from my GT-I9003

Hmmm... but I have tried it also..now I think its better go back to stock . Can anyone give me the URL to download latest stock for our phone.....?
Sent from my GT-I9003 using xda app-developers app

alwinaugustin said:
Can anyone give me the URL to download latest stock for our phone.....?
Click to expand...
Click to collapse
Here?
http://forum.xda-developers.com/showthread.php?t=1133787
Sent from my GT-I9003 using xda app-developers app

Issue persists in Stock also
:crying::crying::crying:
The sad thing is that the problem persists after flashing stock ROM also. I have first flashed to XXKPE and then to XXKPU using Odin as given in the following link
http://blog.vigitalsolutions.com/2012/08/18/upgrade-samsung-galaxy-sl-i9003-to-cyanogenmod-9-cm9/
The issue is there in both the stock ROMS. Actually this issue was not present before. Now don't know what to do. I am only able to connect to internet in plugged in state.
Some times it turns off during call also .
:crying::crying::crying:

CPU frequency maxed out

My CPU stays maxed out at 1400 and it doesn't sleep for some reason I tried changing kernels and rom and full wipe but nothing has helped. This has just started occurring the past week or two and I didn't install anything new. Can someone help?
Sent from my GT-N8000 using xda premium

caaznkid said:
My CPU stays maxed out at 1400 and it doesn't sleep for some reason I tried changing kernels and rom and full wipe but nothing has helped. This has just started occurring the past week or two and I didn't install anything new. Can someone help?
Sent from my GT-N8000 using xda premium
Click to expand...
Click to collapse
When you switched roms did you do a dirty install? Or did you do a factory reset then install then wipe dalvik and cache? If you did it dirty possible the problem app followed you

I did a fresh install. The only reason I wiped it in the first place is because thus problem came out of nowhere. Better battery stats shows me it's due to media scanner service that my tablet is doing this.
Sent from my GT-N8000 using xda premium

Question
Dear android experts
I'd like to ask, I have Galaxy Note 10.1 GT-N8000 and having problem in starting app ASPHALT 7 1.0.6, this app always stopped.
My question were:
1. What if my VGA card ( MALI ) is damaged??? does GT-N8000 device still could be started or couldn't be started????
2. what happened to my GT-N8000? because I just changing Jelly Bean version every month, and never got problem, and now I really got a problem, this time from XXCMD1 Multi-CSC Deodexed to XXCME2 Multi-CSC Deodexed downloaded from the XDA forum. from XXCMD1 asphalt 7 1.0.6 played smoothly then I install XXCME2 and asphalt 7 1.0.6 run smoothly, the last time when I feel that XXCME2 wasn't too good and I do the
1. 2x Wipe data / Factory Reset.
2. 2x Wipe Cache
3. 2x Wipe Dalvik Cache
4. 2x in each, Format SDCard, Format Preload, Format Data, Format System, Format Cache
5. Before install XXCMD1 Multi-CSC deodexed.zip I did a Wipe data / Factory Reset again. Then install
All of this were done using CWM 6.0.3.1
After install XXCMD1 my asphalt 7 1.0.6 could not run anymore, and always said app has stopped. only this app could not be started. all other games still could be started. Now I reinstall XXCME2 Multi-CSC deodexed and asphalt 7 1.0.6 still could not be started too.
What happened to my GT-N8000. Does device always changing OS could damage GT-N8000 hardware???
Thank you so much. :crying:

lmao, thanks for hijacking my thread....I think your problem lies more with the asphalt game. If your GPU was damaged then you'd see a lot of artifacts and a lot of other games would crash too.
Also, I fixed my wakelock maxed CPU frequency problem.
Downloaded an app called SGS toolbox and used to to delete corrupt images on SD which fixed the media scanner problem. Now my tablet can sleep in peace. :good:

thank you so much for the answer. Glad to hear your problem solved.

caaznkid said:
My CPU stays maxed out at 1400 and it doesn't sleep for some reason I tried changing kernels and rom and full wipe but nothing has helped. This has just started occurring the past week or two and I didn't install anything new. Can someone help?
Halo, I'd like to know how to detect CPU stays maxed??? because I never install any tools apps, only a root explorer.
Thanks
Click to expand...
Click to collapse

pikwan80 said:
caaznkid said:
My CPU stays maxed out at 1400 and it doesn't sleep for some reason I tried changing kernels and rom and full wipe but nothing has helped. This has just started occurring the past week or two and I didn't install anything new. Can someone help?
Halo, I'd like to know how to detect CPU stays maxed??? because I never install any tools apps, only a root explorer.
Thanks
Click to expand...
Click to collapse
mine came with A application called system and you can look at the speed there.
Click to expand...
Click to collapse

Phone speaker issue

it's few days that the speaker of my phone doesn't work, but if I do a wipe cache it works again. I've installed DSP manager using cm apps (found on play store) and I thought that it was the problem so I uninstalled it, but I need anyway to do a wipe cache every day to keep the speaker working. any idea?
Sent from my XT1032 using XDA Premium 4 mobile app