Hi, i had installed AR HD 11.0. It worked perfectly, no problems. So, i decided to update to version 11.1 of this room. i downloaded from xda-developers forum, checked md5, flash with clockworkmod recovery v6.0.1.1.
At the end, i saw an error message in aroma:
>>>Flashing modem
assert failed: package_extract_file("additions/modem/modem.bin",
"/tmp/modem.bin")
when i try to reboot, freeze on the samsung screen (Samsung Galaxy Note 10.1).
i tried wipe data, cache, dalvik, ..... no solution
and now, what can i do?
BOStaurus said:
Hi, i had installed AR HD 11.0. It worked perfectly, no problems. So, i decided to update to version 11.1 of this room. i downloaded from xda-developers forum, checked md5, flash with clockworkmod recovery v6.0.1.1.
At the end, i saw an error message in aroma:
>>>Flashing modem
assert failed: package_extract_file("additions/modem/modem.bin",
"/tmp/modem.bin")
when i try to reboot, freeze on the samsung screen (Samsung Galaxy Note 10.1).
i tried wipe data, cache, dalvik, ..... no solution
and now, what can i do?
Click to expand...
Click to collapse
Try Philz Advanced CWM, then reflash ROM.
It works for me
d4rkkn16ht said:
Try Philz Advanced CWM, then reflash ROM.
It works for me
Click to expand...
Click to collapse
thanks d4rkkn16ht,
but didn't work
freeze aroma, can't flash the rom.
Then try High on Android CWM, Mike's recommendation.
now it works, thanks again.
i didn't check correct md5 file.
downloaded again and now it's ok.
had the same problem
d4rkkn16ht said:
Then try High on Android CWM, Mike's recommendation.
Click to expand...
Click to collapse
Had the same issue, high on android cwm helped me.
nic209 said:
Had the same issue, high on android cwm helped me.
Click to expand...
Click to collapse
Glad I can help @BOStaurus
@nic209 : check MD5 signature before flashing & use either High On Andrid CWM or Philz Touch Recovery
Related
Hi all,
i managed to flash my P6200, i've tried
CyanogenMod 10 by aorth (http://forum.xda-developers.com/showthread.php?t=1842090)
I'm using CWM v5 (and now 6), and now i'm stuck with the bootloop (boot unfinished restarted around 5 times or so then it successfully goes into cyanogenmod logo screen and stuck forever), i've tried to rewipe and install the mod and also redownload the mod, it doesn't work at all
i also looked at:
Paranoid Android v2.5 by Androguide.fr (http://forum.xda-developers.com/showthread.php?t=1941615) got the new download link but also stuck in bootloop
is there any available download links or so?
EDIT:
now i'm using CWM 6 and still got bootload any help?
I haven't tried to flash Cyano, but I know the only safe CWM should be 6.0.1.0
gabripranzo said:
I haven't tried to flash Cyano, but I know the only safe CWM should be 6.0.1.0
Click to expand...
Click to collapse
okay i gave then i'll try it with CWM 6
tried with CWM 6 and still not working... is there any advance setting that i'm missing?
Here's what i do:
1. Wipe data
2. Wipe cache
3. Wipe Dalvik Cache
4. install ROM
5. install Gapps
6. Reboot
There's mount and storage setting that i don't quite understand, is there something to do with it?
UPDATE: I Finally solved it...
I installed stock ICS from: http://forum.xda-developers.com/showthread.php?t=1777303&highlight=stock
with Odin (having bad luck with crashing / not detecting Heimdall :crying
It finally boot...!!! and i got ICS..!!! well, i don't stop, next:
Reinstall CWM 6, Backup, Wipe-wipe-wipe, install Paranoid Android v2.50 and Voila...!!!
it boot correctly... maybe i'll try cyanogen soon after updating this PA and done backing up...
Sorry for troubling and hopefully it helps others...
I have flashed both aorth's CM10 and PA, both work fine. However, aorth's CM10 is much better, battery life etc. Make sure to backup and do full wipes if switching between different ROMs. If just upgrading to new aorth CM10s or new PAs from previous versions, cache and dalvik wipes are all that's needed.
Sent from my GT-P6210 using Tapatalk 2
Hi, when we can update Galaxy tab 7.0 p6210 " to jelly bean 4.2 ?!
YES
MontyTheSpecial said:
Hi, when we can update Galaxy tab 7.0 p6210 " to jelly bean 4.2 ?!
Click to expand...
Click to collapse
YES...
to CM10
Hi,
I’m really new at rooting and was just following videos…
I rooted my Samsung Galaxy Tab 2 7.0 P3113 (with CWM recovery) no problem…superuser app all good. I found droidcheats youtube video to install the CM10.2 (cyanogenmod) Jellybean 4.3 rom
https://www.youtube.com/watch?v=uooLuG0Ydr8&list=WLjdPTB2mWRMy4mUvbarAjZEaZRdNawRmD
I downloaded the rom, google apps, tablet ui, and CWM recovery update.
Xda Thread from Codyf86:
http://forum.xda-developers.com/showt...
ClockWorkMod Recovery flashable update:
https://www.file1.info/Rzhs9La
Checked USB debugging, moved files to device, unplugged and put into recovery mode, now 6.0.1.1 version, updated CWM, advanced boot recovery, now version 6.0.3.7, wiped data factory reset, wiped dalik cache, flashed rom….installation aborted.
Looks like I installed the wrong rom file.
Now I’m stuck in recovery or at reboot screen. I think I have the right rom file now but my computer doesn’t recognize my device.
I’m not sure what to do next…Can you help.
Thanks
sd card
I'm thinking if I install the correct rom from the micro sd card, it might work?
ladyrae said:
Hi,
I’m really new at rooting and was just following videos…
I rooted my Samsung Galaxy Tab 2 7.0 P3113 (with CWM recovery) no problem…superuser app all good. I found droidcheats youtube video to install the CM10.2 (cyanogenmod) Jellybean 4.3 rom
https://www.youtube.com/watch?v=uooLuG0Ydr8&list=WLjdPTB2mWRMy4mUvbarAjZEaZRdNawRmD
I downloaded the rom, google apps, tablet ui, and CWM recovery update.
Xda Thread from Codyf86:
http://forum.xda-developers.com/showt...
ClockWorkMod Recovery flashable update:
https://www.file1.info/Rzhs9La
Checked USB debugging, moved files to device, unplugged and put into recovery mode, now 6.0.1.1 version, updated CWM, advanced boot recovery, now version 6.0.3.7, wiped data factory reset, wiped dalik cache, flashed rom….installation aborted.
Looks like I installed the wrong rom file.
Now I’m stuck in recovery or at reboot screen. I think I have the right rom file now but my computer doesn’t recognize my device.
I’m not sure what to do next…Can you help.
Thanks
Click to expand...
Click to collapse
ladyrae said:
I'm thinking if I install the correct rom from the micro sd card, it might work?
Click to expand...
Click to collapse
edit: nevermind, re-read your OP.
Thanks for trying
RikRong said:
edit: nevermind, re-read your OP.
Click to expand...
Click to collapse
I'm really lost...guess I shouldn't have got into this without knowing what to do if something goes wrong.
ladyrae said:
I'm really lost...guess I shouldn't have got into this without knowing what to do if something goes wrong.
Click to expand...
Click to collapse
brother reverting back to stock rom will help you
good luck :good::good:
Thanks
I just found a video on that...thank-you, wish me luck
aditya rathee said:
brother reverting back to stock rom will help you
good luck :good::good:
Click to expand...
Click to collapse
ladyrae said:
I just found a video on that...thank-you, wish me luck
Click to expand...
Click to collapse
you will succeed brother :good::good::good::good:
Hello,
I am trying to install Resurrection Remix ROM onto my Captivate i897 but keep getting "Can't open ... .zip (bad) install aborted". I have CWM Recovery v6.0.4.5 install running CM11. I've heard good things about RR Rom and would like to try it. I've performed wipe data/factory reset, whipe cache partition and wipe dalvik cache but still getting this error. If anyone can tell me what I'm doing wrong would be greatly appreciated.
Thanks.
kartracer73 said:
Hello,
I am trying to install Resurrection Remix ROM onto my Captivate i897 but keep getting "Can't open ... .zip (bad) install aborted". I have CWM Recovery v6.0.4.5 install running CM11. I've heard good things about RR Rom and would like to try it. I've performed wipe data/factory reset, whipe cache partition and wipe dalvik cache but still getting this error. If anyone can tell me what I'm doing wrong would be greatly appreciated.
Thanks.
Click to expand...
Click to collapse
Hi there.My brother is using this ROM and it is wonderful. I guess I know what seems be the problem. I had this kind of issues last time when installing new ROM. You are doing it correctly only that you need the latest version of CWM, that is the Philz touch 6/CWM v6.0.4.8. Try that.
Thanks for the info. Just a bit of an update. I managed to flash RR 5.0.0. The very first release. I noticed my CWM is now at 6.0.4.7. I then try flashing the latest RR release 5.1.0 but am still getting the (bad) message. Is it the case that I need to flash all of the RR release in the order they are introduced? This would be a pain I don't believe there is support for the touch CWM for Captivate. I went to goo.im and was not able for find Philz touch for Captivate i897. Is there another location I can download the CWM 6.0.4.8 for i897?
Thanks.
kartracer73 said:
Thanks for the info. Just a bit of an update. I managed to flash RR 5.0.0. The very first release. I noticed my CWM is now at 6.0.4.7. I then try flashing the latest RR release 5.1.0 but am still getting the (bad) message. Is it the case that I need to flash all of the RR release in the order they are introduced? This would be a pain I don't believe there is support for the touch CWM for Captivate. I went to goo.im and was not able for find Philz touch for Captivate i897. Is there another location I can download the CWM 6.0.4.8 for i897?
Thanks.
Click to expand...
Click to collapse
That would be a pain for sure. So far as I know, if the error pop up during the installation as you mentioned on ur 1st post.. that is due to the CWM. I had this issues when installing UltimaAOSP ROM 4.4.2 on my S3. Only I need was the latest CWM and tadaaa. No problem. Glad to help you a bit. Try to search in the forum or google it. I'm not quite sure also regarding your device. Sorry yeah.
Well ... I managed to flash 5.0.5 but am still getting an error for 5.1.0. I'm going to try 5.0.7 and see what happens. Will post back.
Thanks.
kartracer73 said:
Well ... I managed to flash 5.0.5 but am still getting an error for 5.1.0. I'm going to try 5.0.7 and see what happens. Will post back.
Thanks.
Click to expand...
Click to collapse
I've managed to flash 5.1.0 (the latest release at this point) after flashing 5.0.7. Not exactly sure what happened there but maybe CM11 had something to do with it. But I think you're correct in saying you need the latest release of CWM. Thankfully when I flashed 5.0.0, CWM 6.0.4.7 was installed and that is probably what got me through the rest of the releases. Thanks again for your help.
No problem. I'm glad that I can helped you. Your welcome.?
Sent from my GT-I9300 using XDA Free mobile app
Hi all...
I tried to upgrade by Tab 2 7" to KitKat today and failed. I installed Clockworkmod successfully, but then started getting error 7's. I discovered this was because it was outdated. I've tried to install updated clockwork mod which it says has been successful - but doesn't change the original.
I did a backup of my original rom, but this has failed to reinstall. I've tried to put an old version of cyanogen on it, which also has failed, and re-downloaded the stock rom from samsfirmware which passes through ODIN, resets but then the tab 2 hangs on the Samsung screen - flashing.
I can't seem to resolve it.
Has anyone got any ideas? I can't access anything other than clockworkmod - so if you think you know of a way I can successfully upgrade it I may stand half a chance.....
Thanks
Tim
sheltont said:
Hi all...
I tried to upgrade by Tab 2 7" to KitKat today and failed. I installed Clockworkmod successfully, but then started getting error 7's. I discovered this was because it was outdated. I've tried to install updated clockwork mod which it says has been successful - but doesn't change the original.
I did a backup of my original rom, but this has failed to reinstall. I've tried to put an old version of cyanogen on it, which also has failed, and re-downloaded the stock rom from samsfirmware which passes through ODIN, resets but then the tab 2 hangs on the Samsung screen - flashing.
I can't seem to resolve it.
Has anyone got any ideas? I can't access anything other than clockworkmod - so if you think you know of a way I can successfully upgrade it I may stand half a chance.....
Thanks
Tim
Click to expand...
Click to collapse
Use Odin to restore to the stock ROM. Download the stock rom from samfirmware.com and flash it in Odin as PDA. Then, use the latest recovery (either TWRP, CWM, OR PhilZ) from @Android-Andi's recovery thread in the Dev section. You should now be able to flash any ROM you want to. Make sure you do a backup and a wipe system, cache, Dalvik, data, and android secure (if it's an option.)
Sent from my SGH-T989
thanks and....
Thanks so much, does it matter that it won't boot with the stock Roma which I've installed from sams? Will the recovery program still work?
sheltont said:
Thanks so much, does it matter that it won't boot with the stock Roma which I've installed from sams? Will the recovery program still work?
Click to expand...
Click to collapse
What do you mean? Did you flash the stock ROM in Odin?
Sent from my SGH-T989
yep
jrc2 said:
What do you mean? Did you flash the stock ROM in Odin?
Sent from my SGH-T989
Click to expand...
Click to collapse
Yes, I did twice and it's still hung after apparent success installation according to Odin. I've tried it twice.
No success
Thanks
What I've done tonight is reflashed the original Rom - this time it blew away Clockworkmod. It still wouldn't boot. I then put a recovery solution on from your link, which has flashed well. However I've then tried three ROMS and each have hung after installation on the initial boot.
I'll try them again tomorrow night - but do you have any idea why three ROMS plus the stock keep failing?
Thanks
Tim
sheltont said:
Thanks
What I've done tonight is reflashed the original Rom - this time it blew away Clockworkmod. It still wouldn't boot. I then put a recovery solution on from your link, which has flashed well. However I've then tried three ROMS and each have hung after installation on the initial boot.
I'll try them again tomorrow night - but do you have any idea why three ROMS plus the stock keep failing?
Thanks
Tim
Click to expand...
Click to collapse
Did you wipe system, cache, Dalvik cache, and data before flashing and wipe cache and dalvik after flashing? And your tablet will bootloop after a reinstallation in Odin because Odin does not wipe before installation. After flashing in Odin, reboot recovery (make sure tablet is unplugged,) and wipe data, cache, and dalvik cache. Reboot and you should be good to go.
Sent from my SGH-T989
good idea but still no success....
jrc2 said:
Did you wipe system, cache, Dalvik cache, and data before flashing and wipe cache and dalvik after flashing? And your tablet will bootloop after a reinstallation in Odin because Odin does not wipe before installation. After flashing in Odin, reboot recovery (make sure tablet is unplugged,) and wipe data, cache, and dalvik cache. Reboot and you should be good to go.
Sent from my SGH-T989
Click to expand...
Click to collapse
Hi, I've retried all that this morning-i must admit that I didn't know about wiping cache after install, however it's not made any difference, and still hangs on first boot...
Any other ideas? Thanks for all your help.
Happy success
Hi all
Thanks for all your help,especially rcj! I have managed to recover my device using cynagodmod 9 - it wont run 10 or 11 but at least its up and working - even if it's a downgrade from the Android version I was on Really don't care as I can use it again with a lot more memory.
Thanks - without you I would never have found Phils ROM which enabled me to get this far.
Tim
sheltont said:
Hi all
Thanks for all your help,especially rcj! I have managed to recover my device using cynagodmod 9 - it wont run 10 or 11 but at least its up and working - even if it's a downgrade from the Android version I was on Really don't care as I can use it again with a lot more memory.
Thanks - without you I would never have found Phils ROM which enabled me to get this far.
Tim
Click to expand...
Click to collapse
Which version of PhilZ? And I have found that TWRP 2.7.1.0 works better than other versions for KK.
Sent from my SGH-T989
Use latest Philz touch recovery. And use the rom and gapps compatible to your tab. Don't forget to reset to factory setting, clear cache and wipe dalvic cache before flashing the rom and gapps ☺
Sent from my GT-P3100 using XDA Free mobile app
Hi there!
Guys....I need some clues on how to handle with this problem.....
I have my 5.0 LRx210 rooted and installed TWRp recovery by use of Nexus Root Toolkit...the root and the recovery just work fine...
Somehow I managed to try flashing my favorite roms....like Pure White Rom/Xtrasmooth2.4/Cataclysm....and so on..
I have got success only on Pure White Rom...for other roms after successful flashing it just keeps saying: No OS installed are you
sure you wish to reboot. For those roms I have tried both Full Wipe flash and Dirty Flash...but got no success..I don't know why?
Come to the blind end now.... I am just staying on Pure White rom waiting for solution....
hope someone here guide me something...thank you
ayirusp
Thailand
Even if TWRP says no OS try booting up it should work.
Sent from my Nexus 5 using XDA Free mobile app
shri_chanakya said:
Even if TWRP says no OS try booting up it should work.
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Thank you bro
I did try it already...just stuck on the boot black screen with google logo.....
Although try updating the TWRP recovery to the latest 2.8.2.0, or even CWM recovery....just got the the same result.
The flashing process is mentioned as Successul.., but then when pushing the reboot button it just shows me the above mentioned sentence....
thanks anyway
ayirusp said:
Thank you bro
I did try it already...just stuck on the boot black screen with google logo.....
Although try updating the TWRP recovery to the latest 2.8.2.0, or even CWM recovery....just got the the same result.
The flashing process is mentioned as Successul.., but then when pushing the reboot button it just shows me the above mentioned sentence....
thanks anyway
Click to expand...
Click to collapse
Try flashing TWRP 2.8.1.0 in fastboot and try flashing a rom again, 2.8.2.0 can be quirky for some users.
gee2012 said:
Try flashing TWRP 2.8.1.0 in fastboot and try flashing a rom again, 2.8.2.0 can be quirky for some users.
Click to expand...
Click to collapse
Thank you Bro...
Yes...I do apply root and TWRp recovery 2.8.1.0 via Nexus Root Toolkit 1.9.8....at first.....but it just keeps saying NO OS installed...after finish flashing another rom like Xtrasmoot/Stock5.0 flashable/Cataclysm and bla..bla...bla....(except for Pure White Rom which is my current rom)..and trying to reboot the system.
So I decided to try it with other recoveries like 2.8.2.0 and also the latest CWM recovery....Yet I've got no success till now...that's quite weird
(I have tried flashing with both Full Wipe Flash (Data factory/wipe cache/dalvik cache) and Dirty Flash (wipe cache/dalvik cache)...but as you know...no success....
Thanks anyway...
Thailand
ayirusp said:
Thank you Bro...
Yes...I do apply root and TWRp recovery 2.8.1.0 via Nexus Root Toolkit 1.9.8....at first.....but it just keeps saying NO OS installed...after finish flashing another rom like Xtrasmoot/Stock5.0 flashable/Cataclysm and bla..bla...bla....(except for Pure White Rom which is my current rom)..and trying to reboot the system.
So I decided to try it with other recoveries like 2.8.2.0 and also the latest CWM recovery....Yet I've got no success till now...that's quite weird
(I have tried flashing with both Full Wipe Flash (Data factory/wipe cache/dalvik cache) and Dirty Flash (wipe cache/dalvik cache)...but as you know...no success....
Thanks anyway...
Thailand
Click to expand...
Click to collapse
Well if it we`re me i`d reflash the factory image and start over from scratch, then install TWRP 2.8.1.0 and flash superSU.zip 2.3.5 and flash a custom rom.
gee2012 said:
Well if it we`re me i`d reflash the factory image and start over from scratch, then install TWRP 2.8.1.0 and flash superSU.zip 2.3.5 and flash a custom rom.
Click to expand...
Click to collapse
Yeah...I reflashed it with factory image 5.0 LRX21O downloaded from Official Google Resource and began the whole process of rooting and recovery installation (TWRP 2.8.1.0 and SuperSu.zip..offcourse).....and then started flashing custom roms...the only rom that I could get through with success is Pure White Rom......for other roms it just had been like I mentioned above......
.....I can not figure it out now....why?
Thank you my Bro....
ayirusp said:
Yeah...I reflashed it with factory image 5.0 LRX21O downloaded from Official Google Resource and began the whole process of rooting and recovery installation (TWRP 2.8.1.0 and SuperSu.zip..offcourse).....and then started flashing custom roms...the only rom that I could get through with success is Pure White Rom......for other roms it just had been like I mentioned above......
.....I can not figure it out now....why?
Thank you my Bro....
Click to expand...
Click to collapse
Because some things on your phone are messed up and figuering out what that is/are will probably take longer then starting over imo.