[Q] N9599T bluetooth & mobile internet issues - General Questions and Answers

Hi there
I have just taken delivery of a (Star, I think) N9599T - the 1.5ghz MTK MT6589T CPU version..
Overall, I think it's a great phone but I have a couple of issues:
Bluetooth: Although it will pair with my car (BMW E46) all I can hear is white noise (like the old school when a tv channel went off air or wasn't tuned in sound) when I make a call.
Auto mobile internet connection: When I go out of wifi range the phone does not automatically switch to mobile internet. I have to switch 3G to sim 2 and then back to Sim 1 before the APN kicks in and the phone hooks up to my mobile data provider.
The phone came pre-rooted and is running Android 4.2.1.
Has anyone else had similar issues or do you have any advise on how to fix them?
Thanks..

Related

App for controling second Phone calls via BT

Hi, some time ago I bumped on a program on WM that was able to control and forward my second phone (ericsson t610) calls via BT to my primary headset. Since I'm using 2 sim cards for my personal and business calls I really hate dealing with 2 phones. Can you direct me to a program that can connect to my stupid second phone and can take and make calls via BT, so my second phone sits in my pocket while I control it whit my HTC HD.
P.S. If there is any possible way of connect via INTERNET to my 2nd phone and use it by TCP/IP or voice over ip somehow it will be even better because I have 3G internet connection pack to my Operator and quite a lot of MB to waste. Of course we should think of a way to connect my second phone (or just sim) to a home internet connection.
Thanks in advance guys, you are the best!
Guys? Anybody?

Portable hotspot issues with car wifi

Hi,
I've joined this forum to try and get some help with this along with any future issues as it looks like there's a smart bunch of people on here...
Please do move this to the appropriate area if I've put it in the wrong place.
I have a Samsung Galaxy S7 on a UK 'Three' contract.
However I recently bought a new car which has a WLAN feature - basically what it does is connects to your phone's portable hotspot, then broadcasts that internet connection on it's own in-car hotspot for passengers to connect to.
The benefit (because at first glance you think "why bother - why not just connect those devices straight to the phone's hotspot?") is that once the car connects to your phone's hotspot it uses the car's antenna to receive data etc which means you get a stronger and more consistent data connection.
So, the issue:
My portable hotspot works fine when connecting a device such as laptop/iPad etc directly to the phone.
However when I connect the car to my personal hotspot, and then a device to the car, it all connects up okay but I get errors on the end-user device saying that there's no internet connection.
I have done quite a lot of testing with this - for example in the following situations it works perfectly for the end-user devices - just never with my S7!!
- Connecting the car to my girlfriend's iPhone SE hotspot (on the same network)
- Connecting the car to my friend's S7 (on the same network?!!)**
- Connecting the car to my home WiFi whilst on the drive
**Interestingly, my friend's S7 was bought separately so had a pure Samsung build on it - mine came from Three so had a load of Three crap on it.
So, to tackle that, yesterday I did a cache wipe and factory data reset, then entered download mode and using Odin, loaded on the latest version of Nougat including all the new BL/AP/CP/CSC files.
Then me and my friend swapped SIM cards to see if that could be the issue, we tried using both phones. None of it worked, and now even his phone with his SIM card in it (which previously worked) no longer works with the car's WLAN.
It still doesn't work and it's driving me mad
Today I'm going to try messing with APN settings because I've read that changing the APN type to just "default" has solved some similar issues to this but without the 'middle-man' car in the middle.
I've also called Three and asked them to send me a replacement SIM card.
I'm sure it is NOT the car that's the issue, as it has worked fine on some devices.
I'm sure it is NOT the Three network that's the issue, as it has worked on 2 other devices on that network.
I suspect it's either some sort of config that needs changing, or the hardware of the phone is faulty.
I have a "remote management session" with Samsung support later today, but I don't expect them to be able to help with this remotely
Any thoughts or ideas here would be greatly appreciated, I'm sorry I've written so much but wanted to include all the info.
Thanks, Andrew

Problems with 3G Sticks

hi,
im using erisin 4046 MTCD KGL with 5.1.1
every Stick i tried (huaweis Exxx) wont work out of box.
Sometimes the Stick works on 50% bootups
and sometypes loses the internet connection while am driving trough a good connection area.
Im already using an active USB-Hub with external power from radio ACC and GND, so thaths couldnt be the problem?
Also interesting: Some Sticks appears as 3G Bar-Icon like Wlan and some two-pc-icon.
Is there a way to reset the Stick trough app/terminal?
I cant disconnect the stick while drive because its included behind the radio.
Sticks with sd slot are shown as a drive and did not work for me.
Without I got the same problems. Huawei offers an app. So you can reboot via this.
At the moment using a mobile Wlan hot-spot from Huawei. Works much better.
Getapped and getalked with 6603
makes2068 said:
Sticks with sd slot are shown as a drive and did not work for me.
Without I got the same problems. Huawei offers an app. So you can reboot via this.
At the moment using a mobile Wlan hot-spot from Huawei. Works much better.
Getapped and getalked with 6603
Click to expand...
Click to collapse
servus
none of the sticks were shown as SD-Slots.
What you mean with app for reboot? Reboot entire device or simply the stick?
Could you show/explain me the wlan hotspot you mean?
This stick did not work correctly = Huawei E355.
This hot-spot works good = Huawei E5330.
This app controls both = Huawei hikink. See play store.
Getapped and getalked with 6603
so this means:
if i have a LTE Card, i could also use a 4G hotspot?
but i have no idea which is supported..
okay easy:
Huawei e5577 is that what i want LTE
I am using a Huawei E1750 with deactivated CD Drive and SD Slot and it works like a charm!
Use this AT command: AT^U2DIAG=0
(further info: http://www.3g-modem-wiki.com/page/Huawei+AT-commands)
how to set these commands?
trough terminal?
Hello,
I tested a few modems and every time there were problems on the route. Modems often lost their reach and did not connect again. You had to disconnect and reconnect it. On the 650 km route the internet was maybe 20% off the route.
I am fully satisfied only after the purchase of Huawei E5573. Connected via USB is turned on only when the radio is turned on. When turned off the radio turns itself off after one hour. The Internet transmits to the radio via USB. Of course WIFI works for other devices. The same way as with previous modems - 90% of connections. All the way 650 km I listened to TuneIn Radio. It broke 4 times in total.
Summarizing:
- KIANO Q7600 - Only 3G, often lost their reach
- Huawei E173u-2 - Only 3G, often lost their reach
- Huawei E3131 - Only 3G, often lost their reach
Huawei E5573 - LTE/3G/2G - Very good reach.
The HUAWEI E3372 LTE Surfstick is also working perfect. It's not showing if you have a 3G or 4G Connection in the Status Bar, just the Network Symbol. Important, you have to disable PIN Authentification for the SIM Card first in the HUAWEI Software or it does not work with your Unit. Typing 192.168.8.1 in your Unit Webbrowser, you can access the Stick Webinterface where you can check the Connection and so on.
thats realy annoying...
i modded two huawei sticks E173 and E303 including modem firmware update with the command AT^U2DIAG=0
but still connection/mini icon loss
i realy think about E5577 wlan hotspot solution...
Hi, many LTE units appear as network cards to android, thus you see a two computers icon in the starus bar instead of a radio signal icon.
When you use these LTE sticks, you are unable to use wifi for two reasons: first because the radio is unable to connect to any hotspot (I don't know why) and second because ever a wired network is preferred over a wifi network. This is sometimes a problem just because LTE is not a wited connection, but android thinks so, and you cannot use wifi anymore...
UPDATE: I've noticed that on the new android version of my Erisin HU 20161220, is possible to use wifi while LTE stick is connected, and android prefers wifi over LTE.
yasiu.brzeg said:
Hello,
I tested a few modems and every time there were problems on the route. Modems often lost their reach and did not connect again. You had to disconnect and reconnect it. On the 650 km route the internet was maybe 20% off the route.
I am fully satisfied only after the purchase of Huawei E5573. Connected via USB is turned on only when the radio is turned on. When turned off the radio turns itself off after one hour. The Internet transmits to the radio via USB. Of course WIFI works for other devices. The same way as with previous modems - 90% of connections. All the way 650 km I listened to TuneIn Radio. It broke 4 times in total.
Summarizing:
- KIANO Q7600 - Only 3G, often lost their reach
- Huawei E173u-2 - Only 3G, often lost their reach
- Huawei E3131 - Only 3G, often lost their reach
Huawei E5573 - LTE/3G/2G - Very good reach.
Click to expand...
Click to collapse
I have the exakt same issues. We should collect logs and send them to the support.
im already in touch with erisin support, they mean all sticks are bad... (haha) only official erisin sticks are supported.
When im thinking about their official DAB+ antenna which isnt working... haha bad news for all erisin devices
My best practice way is actually:
-active USB-Hub with external 12v power
-usb cable extender away from any radio/magnet field/heat (on bmw e46, behind the speedometer) and then plugged in huawei E173 with newest firmware (appears as 3G icon)
we should donate to @Malaysk for a good rom for RK3288 / PX5 unites.
@Malaysk
i've bought a huawei 5577C and will integrate it into car.
i think that will resolve all f**** 3G issues.
i will feedback after 1-2weeks of using
danielloe said:
i've bought a huawei 5577C and will integrate it into car.
i think that will resolve all f**** 3G issues.
i will feedback after 1-2weeks of using
Click to expand...
Click to collapse
Hi buddy,
Some questions for you as I am thinking about buying the same router.
Does it turn on when you start your car?
Does it work without battery?
Does it kind of go to sleep when you are not using it?
I'm on E3131 with firmware from Hilink version, works really good but it's bit slow cause it's only 3G and I miss WiFi that I could you use to mirror my iOS device.
I also have E5251 but it sometimes need to be reset for the wifi to work (even if it's connected via USB)
yasiu.brzeg said:
I am fully satisfied only after the purchase of Huawei E5573. Connected via USB is turned on only when the radio is turned on. When turned off the radio turns itself off after one hour. The Internet transmits to the radio via USB. Of course WIFI works for other devices. The same way as with previous modems - 90% of connections. All the way 650 km I listened to TuneIn Radio. It broke 4 times in total.
Click to expand...
Click to collapse
I just ordered an Huawei E5573. Attaching just a "modem stick" really sucked.
Did you manage to operate the router without the battery, just powered by USB? It does not start when I remove the battery....

Samsung Galaxy S8+ rSAP and Audi MMI

I just got an Audi A5 with MMI 3G+ (it has no sim slot) and I can connect the phone to bluetooth but I can't share the data connection with the mmi, which is something I'd really like for Google Maps and traffic info etc.
I've read that you need rSAP to connect, and while the option to connect to the device as 'Car Phone' is enabled whenever I try to connect using my non-rooted phone I just get 'Connection failed'. Do I need to root my S8+ to be able to connect in this way or is there something I'm missing?
No ideas?
Same problem here...
Is it a dual SIM? Rsap is dodgy, the car does not know which SIM to use and gets confused..I went thru 5 dual SIM phones all failed or no car phone option. S8 plus single SIM worked..
But I have a SIM slot in my car
You need phone prep high I think.
Your car has no antenna to use a sim. So Car phone Bluetooth mode is useless.
I have A7 black edition.But worked in a5black edition. Tech pack high I had. Both have SIM slots.
Once it's connected to phone in car phone mode it uses 4g and you can use cars WiFi to share data too like a hotspot..so I connect my phone to that so I can still use data on my phone.... oh and Google maps and Audi connect work...which is useless.
Sorry.
S8+ bluetooth rSAP
I've been trying to solve this problem ever since the update to Android 8 came out about 6 months ago, out of the box my S8+ was running android 7 and it was flawless, rSAP and everything else.
I've tried factory reset (suggested by Samsung support ) and networks reset and all I get is the same behavior :
It'll first connect to the car in rSAP mode then disconnects in 2 minutes and reconnect in hands free mode and every now and then it will disconnect and reconnect again in hands free
Phone calls and streaming music is in poor quality
Sorry I can't help you much but all I can tell you from the many forums I read it's quite common problem with the S8+ on Android 8

P30 ELE-L09 - Tethering Issue

Hi Guys,
Hoping someone can point me in the right direction.
I've recently switched from my trusty Samsung Note 4 (resurrection remix ROM) to a P30 (ELE-L09) - Single SIM, 6GB RAM, 128GB, Latest updates .
However when using the P30 4G USB or WiFi HotSpot to windows 10, my work Cisco AnyConnect VPN connects & disconnects continuously. Looking at the Cisco Logs on my laptop - it's sending DTLS control frames but never receives any back, hence drops the tunnel and attempts to reconnect.
tested the SIM and tethered to my old Note 4 - VPN stable - so not a carrier issue.
So after trying everything i came across a forum thread detailing a similar issue with iphone and AT&T in the US. and the fix was to lower the MTU - netsh interface ipv4 set subinterface "network adapter" mtu=1320 store = persistent
VPN now stable both WiFi & USB - meaning the P30 is the bottleneck? tested and it maxes out @ MTU 1344
surely the device can do better than this, compared to my note 4 it's has much better specs.
Having to manually increase my MTU back to 1500 when on on decent wifi is a pain
has anyone else experienced this?
and is there anything i can do to resolve the issue
Thanks in advance
UKt

Categories

Resources