i've never tried a video until today (i've cataclysm rom, but i've never tried video on stock rom) and i've this audio problem
http://youtu.be/2PZrFiXB_-o
what do you think?
phantomEVO said:
i've never tried a video until today (i've cataclysm rom, but i've never tried video on stock rom) and i've this audio problem
http://youtu.be/2PZrFiXB_-o
what do you think?
Click to expand...
Click to collapse
Currently, Im running Cataclysm ROM as well with franco kernel and do not have the issue. Do you have any thing else installed (Xposed, root apps for sound, custom kernel, etc)? If not, try fresh WIPE, install of the ROM again.
i've last elementalx
phantomEVO said:
i've last elementalx
Click to expand...
Click to collapse
Try a different kernel and see if problem persists. If it does, then you need to do a clean flash of ROM and try again with elementalX. Franco works very well for me and may have something to do with that.
RevelationOmega said:
Try a different kernel and see if problem persists. If it does, then you need to do a clean flash of ROM and try again with elementalX. Franco works very well for me and may have something to do with that.
Click to expand...
Click to collapse
if i reflash the rom, will i lost the elemental kernel?
phantomEVO said:
if i reflash the rom, will i lost the elemental kernel?
Click to expand...
Click to collapse
Yes, reflashing the ROM will overwrite the kernel and replace the installed ROM stock kernel, you will need to reflash the elementalX kernel again or another kernel to have the custom one installed. I'd recommend another kernel to test if the problem was kernel related. Most kernels, with audio support, can throw off sound in areas/apps.
phantomEVO said:
i've never tried a video until today (i've cataclysm rom, but i've never tried video on stock rom) and i've this audio problem
http://youtu.be/2PZrFiXB_-o
what do you think?
Click to expand...
Click to collapse
That static noise while recording video's is a known bug of android 4.4.2, its even there on stock rom
Related
I've been trying to get morfic's Trinity UV11 kernel to work with both the Cyanogenmod 7.1-RC1 as well as reddev1's AOSP kernel. I've flashed everything through Clockworkmod as well as cleared the Dalvik-cache with the provided zip in the thread. The issue that comes up is that the phone boots into the sign-in screen fine but later on the touch response stops working and then the phone restarts. Is there something wrong with the roms/process that I'm using or is it just that my phone cannot handle the undervoltage of the ROM? Any suggestions would be welcome!
boredomkillz said:
I've been trying to get morfic's Trinity UV11 kernel to work with both the Cyanogenmod 7.1-RC1 as well as reddev1's AOSP kernel. I've flashed everything through Clockworkmod as well as cleared the Dalvik-cache with the provided zip in the thread. The issue that comes up is that the phone boots into the sign-in screen fine but later on the touch response stops working and then the phone restarts. Is there something wrong with the roms/process that I'm using or is it just that my phone cannot handle the undervoltage of the ROM? Any suggestions would be welcome!
Click to expand...
Click to collapse
update your cm7, rc1 is old and outdated. try the latest cm nightly or cm kang. flash the latest, your gapps, and the kernel. in that order, then reboot.
simms22 said:
update your cm7, rc1 is old and outdated. try the latest cm nightly or cm kang. flash the latest, your gapps, and the kernel. in that order, then reboot.
Click to expand...
Click to collapse
Do you have any suggestions for stable AOSP roms that would work with this kernel? I'm trying to avoid the CM7 nightlies just because of any possible stability issues.
boredomkillz said:
Do you have any suggestions for stable AOSP roms that would work with this kernel? I'm trying to avoid the CM7 nightlies just because of any possible stability issues.
Click to expand...
Click to collapse
na.. i run either nightly or kang as a daily. should be much more stable than rc1 in any case
Hmm I've done what you suggested (flashing the latest nightly, then gapps, then kernel) and still no luck getting past the sign in screen. I've also used the "battery pull" method of rebooting the phone that was noted in the thread and still have the same situation.
boredomkillz said:
Hmm I've done what you suggested (flashing the latest nightly, then gapps, then kernel) and still no luck getting past the sign in screen. I've also used the "battery pull" method of rebooting the phone that was noted in the thread and still have the same situation.
Click to expand...
Click to collapse
does it work with any other rom/kernel?
simms22 said:
does it work with any other rom/kernel?
Click to expand...
Click to collapse
I've done a CM7/Netarchy(BFS) as well as reddev1's/Netarchy(BFS) combination which have both worked well without a hitch.
As I said: I was wandering if it is possibile to change kernel, I tried this one, installed with aroma, but my Sensation is stuck in a bootloop.
I'm S-on, I tried to flash either with and without the 4ext smart flash with the same result.
Anyone has a solution?
Fulvio93 said:
As I said: I was wandering if it is possibile to change kernel, I tried this one, installed with aroma, but my Sensation is stuck in a bootloop.
I'm S-on, I tried to flash either with and without the 4ext smart flash with the same result.
Anyone has a solution?
Click to expand...
Click to collapse
flash the boot.img of the rom manually
see here how
http://forum.xda-developers.com/showthread.php?t=1631861 (only extra 1step)
otherwise flash another kernel
which kernel did you use?
rzr86 said:
flash the boot.img of the rom manually
see here how
http://forum.xda-developers.com/showthread.php?t=1631861 (only extra 1step)
otherwise flash another kernel
which kernel did you use?
Click to expand...
Click to collapse
Sorry! I forgot to past the link and then I had to wait five minutes to edit my post and, well, I forgot again.
This is the kernel: http://forum.xda-developers.com/showthread.php?t=1216197 I don't really need it but I would have tried some oc and the sweep2wake function and stuff, so, any other kernel (or even the rom one, if it's possible to set it) is the same to me.
Just to tell you: I flashed Jellybam after a full wipe, and it was working, then flashed the kernel, then, when I got stuck in the bootloop I flashed Jellybam again without wiping, right now all works properly.
Fulvio93 said:
Sorry! I forgot to past the link and then I had to wait five minutes to edit my post and, well, I forgot again.
This is the kernel: http://forum.xda-developers.com/showthread.php?t=1216197 I don't really need it but I would have tried some oc and the sweep2wake function and stuff, so, any other kernel (or even the rom one, if it's possible to set it) is the same to me.
Just to tell you: I flashed Jellybam after a full wipe, and it was working, then flashed the kernel, then, when I got stuck in the bootloop I flashed Jellybam again without wiping, right now all works properly.
Click to expand...
Click to collapse
That kernel is NOT designed for AOSP Jelly Bean ROMs like JellyBAM. That kernel is designed for Sense Ice Cream Sandwich ROMs, so it's to be expected that your phone won't boot after flashing that over JellyBAM. If you want a kernel to use with JellyBAM that has all the features that you just mentioned (Sweep2Wake, OC, etc.) then try my kernel (Sultan kernel). The thread is here: http://forum.xda-developers.com/showthread.php?t=2035897
android1234567 said:
That kernel is NOT designed for AOSP Jelly Bean ROMs like JellyBAM. That kernel is designed for Sense Ice Cream Sandwich ROMs, so it's to be expected that your phone won't boot after flashing that over JellyBAM. If you want a kernel to use with JellyBAM that has all the features that you just mentioned (Sweep2Wake, OC, etc.) then try my kernel (Sultan kernel). The thread is here: http://forum.xda-developers.com/showthread.php?t=2035897
Click to expand...
Click to collapse
Yeah well, I was looking at the title of that kernel thread while I realized which was the problem, I'm glad to tell you that I flashed your kernel last night (I'm Italian) and after a whole day using it I have to say that I really like it (even if I've to settle with all the differences between the governors and the best way to set them with aroma).
Thank you!
I got my N5 yesterday
unlocked bootloader
running TWRP
can flash and setup any rom
CAN NOT GET ANY KERNEL TO BOOT (using CM types when available, latest try was running sylentprofet minimal}
not sure what is going on, probably something small that I am missing.
tried:
faux
franco
N3o
ElementalX
Sorry if it is a simple fix. Did try to search but no real results that helped
If you're running cm look for CAF kernels.
As stated above, the problem started when you flashed, faux, franco kernel. Elementalx has a version which is compatible to CM Roms but need to read well. I heard of some people having problems after flashing franco, where another kernel wouldn't boot after franco.
Do a clean Rom installation, boot the phone with the stock CM kernel, then try to flash Chaos kernel and see how it does
thanks
why do we now have to use a particular type of kernel now?
Thank you guys for the assistance I booted my AOKP rom then flashed chaos with no issues, I knew it was something simple. :victory:
orvon.freeman said:
why do we now have to use a particular type of kernel now?
Thank you guys for the assistance I booted my AOKP rom then flashed chaos with no issues, I knew it was something simple. :victory:
Click to expand...
Click to collapse
Glad you got it working
A quick search returned this from faux. more CAF info available around:
http://forum.xda-developers.com/showpost.php?p=46098546&postcount=15393
Dears,
I have nexus 5 with open bootloader + Recovery clockwork-6.0.4.4 + root + MIUI V5 custom Rom
because the lag and the hate of my phone especially when Turn on 3G data, I decided to change the kernel to custom kernel
then I used the franco kernel r63 from this post
http://forum.xda-developers.com/google-nexus-5/orig-development/kernel-franco-kernel-r53-t2508284
I used the "franco.Kernel updater Free App" to download the latest update and flash it
but after that the nuxes 5 didn't work, still stock on the logo of Rom !!
I tried to install the stock kernel from this link boot-4.4.1 by "fastboot flash boot" command but still same problem
and also I tried to install the Trinity Kernel "T5-4.4.2-B10" by flashboot command and still same problem,
and tried to re flash the Zip file of MUIU Rom, but nothing new, same problem stock on the logo picture of Rom when start !
any help please ?
I want to install the franco kernel with my MIUI Rom, even if the solution will remove all my App & data no problem !
none of those kernels are miui compatible. what you have to do is either flash the miui kernel(or compatible) or just reflash miui dirty(don't wipe anything).
Or just flash away from MIUI to get rid of your lag problem.
simms22 said:
none of those kernels are miui compatible. what you have to do is either flash the miui kernel(or compatible) or just reflash miui dirty(don't wipe anything).
Click to expand...
Click to collapse
simms22
Many thanks for you, I change the kernel and used this "Silean Kernel Nexus 5", which is compatible with MIUI rom, and My Nexus 5 go a way from last problem ! Thanks again. :good:
SilkyJohnson said:
Or just flash away from MIUI to get rid of your lag problem.
Click to expand...
Click to collapse
Thanks for your Idea, this is my first time with this rom and I found it Good if the new kernel will solve these two problems ! I hope or I will get new Rom ! do you recommend any new good Rom ?!
Nuxes 5
Sent from my Nexus 5
I've been using Temasek's UNOFFICIAL Build, for his last 3 build updates with TYR kernel. I decided I wanted to try out AK, or Render Kernel with Tamasek. Flashed new UKM update from AK, flashed new kernel. Restarted the phone and it constantly reboots on One+ logo. Never loads boot animation. Decided to fully wipe the phone, including system and reflash Tamesek. Then tried flashing AK. Same problem. Tried full wiping again and flashing a different rom and AK kernel or Render kernel and same issue. Reflashed TYR kernel and it works perfectly fine.
I have no idea what's going on. But, I don't want to be stuck using only 1 kernel. Any ideas?
garz said:
I've been using Temasek's UNOFFICIAL Build, for his last 3 build updates with TYR kernel. I decided I wanted to try out AK, or Render Kernel with Tamasek. Flashed new UKM update from AK, flashed new kernel. Restarted the phone and it constantly reboots on One+ logo. Never loads boot animation. Decided to fully wipe the phone, including system and reflash Tamesek. Then tried flashing AK. Same problem. Tried full wiping again and flashing a different rom and AK kernel or Render kernel and same issue. Reflashed TYR kernel and it works perfectly fine.
I have no idea what's going on. But, I don't want to be stuck using only 1 kernel. Any ideas?
Click to expand...
Click to collapse
Better ask your question in AK or Temasek thread
A friend of mine is having touch issues with his opo! It's unresponsive sometimes! He is on stock unrooted 05q. Will flashing a custom kernel help?
If yes please suggest a good one
garz said:
I've been using Temasek's UNOFFICIAL Build, for his last 3 build updates with TYR kernel. I decided I wanted to try out AK, or Render Kernel with Tamasek. Flashed new UKM update from AK, flashed new kernel. Restarted the phone and it constantly reboots on One+ logo. Never loads boot animation. Decided to fully wipe the phone, including system and reflash Tamesek. Then tried flashing AK. Same problem. Tried full wiping again and flashing a different rom and AK kernel or Render kernel and same issue. Reflashed TYR kernel and it works perfectly fine.
I have no idea what's going on. But, I don't want to be stuck using only 1 kernel. Any ideas?
Click to expand...
Click to collapse
Dirty flash the ROM first to get the stock kernel back, then try flashing another kernel.
Flash latest twrp.
Sent from my bacon!!!!!
Use twrp recovery
loridoo said:
Use twrp recovery
Click to expand...
Click to collapse
What a useful answer.
Sent from my bacon!!!!!
timmaaa said:
Dirty flash the ROM first to get the stock kernel back, then try flashing another kernel.
Click to expand...
Click to collapse
I tried this, I now tried 3 different roms. SlimSaber unnofficial, Robbie's CM12, and Euphoria and all of them do now allow me to flash AK kernel or any other kernel. I think something borked on one of TYR's kernel flashes. May I should reset the phone completely. Is there an option to do this with ODIN that someone can point me into?
NickosD said:
Flash latest twrp.
Sent from my bacon!!!!!
Click to expand...
Click to collapse
Duh...
garz said:
Is there an option to do this with ODIN that someone can point me into?
Duh...
Click to expand...
Click to collapse
Odin is just for Samsung phone
We use fastboot instead
waterdaan said:
Odin is just for Samsung phone
We use fastboot instead
Click to expand...
Click to collapse
Right, just wiped/restored my phone to stock/factory all the way back to CM11S30R. Unlocked bootloader, rerooted, upgraded firmware and reflashed Euphoria and still can't flash AK without bootloopingon the ONE+ logo. I then clean wiped, and flashed Euphoria and same issue. I am at a loss, I have no idea what else to do.
garz said:
Right, just wiped/restored my phone to stock/factory all the way back to CM11S30R. Unlocked bootloader, rerooted, upgraded firmware and reflashed Euphoria and still can't flash AK without bootloopingon the ONE+ logo. I then clean wiped, and flashed Euphoria and same issue. I am at a loss, I have no idea what else to do.
Click to expand...
Click to collapse
No need to flash back to 30R
I'd flash the 05Q stock using fastboot
That comes with latest modem etc
Then if you'd like flash custom rom in recovery
Unlock bootloader?? Did you lock it after unlocking it?
What version of recovery are you using?
waterdaan said:
No need to flash back to 30R
I'd flash the 05Q stock using fastboot
That comes with latest modem etc
Then if you'd like flash custom rom in recovery
Unlock bootloader?? Did you lock it after unlocking it?
What version of recovery are you using?
Click to expand...
Click to collapse
I am using TWRP 2.8.5.1.. I just figured I'd redo everything from scratch. Nothing is working. I can only flash TYR with all the roms I've tried, where it successfully boots. I'm also flashing UKM 3.8.1.
garz said:
I am using TWRP 2.8.5.1.. I just figured I'd redo everything from scratch. Nothing is working. I can only flash TYR with all the roms I've tried, where it successfully boots. I'm also flashing UKM 3.8.1.
Click to expand...
Click to collapse
try to redownload AK kernel, Maybe a bad download
Anyway good luck
waterdaan said:
try to redownload AK kernel, Maybe a bad download
Anyway good luck
Click to expand...
Click to collapse
Did that twice. Installs perfectly every time.