Reading Note 3 forums, i've found this thread:
http://forum.xda-developers.com/showthread.php?p=50277642
OP discovered some hidden Multiwindow features and created APK which from one side enables these features, and from other side obfuscates it to hide the changes.
I've made additional exploration and found these features on my SHV-E330S(GT-I9506), but more permissions are missed. After adding more permissions i've successfully enabled all these fancy features.
Probably other devices like I9505 and I9500 have (but disabled) these features.
So, what you can expect from this mod:
Floating windows
up to 4 windows displayed side-by-side (instead of 2 max in original version)
Resizable borders for floating windows.
Icons of collapsed windows (displayed on top of any application)
You need to unzip attached file into /system/etc/permissions and then reboot.
It may or may not work for specific device. It also may depend on Android version. People in Note 3 thread report it as not working in KK ROMs, but remember they deal with APK which may work not correctly on KK. Also my zip contains more missed permissions and it may help to enable it on KK.
This works on:
I9506 ROMS: ML5, NA2
I9500 ROMS: MJ8
Let me know on which device and which ROM it works or not.
P.S.: I didn't move to KK yet.
Here is the video of this mod (thanks @tuckersmission)
https://www.youtube.com/watch?v=_IXoQu9amW8
Does Floating Windows work with this mod on KitKat Rom (touchwiz based)?
Still not working but...
sorg said:
Reading Note 3 forums, i've found this thread:
http://forum.xda-developers.com/showthread.php?p=50277642
OP discovered some hidden Multiwindow features and created APK which from one side enables these features, and from other side obfuscates it to hide the changes.
I've made additional exploration and found these features on my SHV-E330S(GT-I9506), but more permissions are missed. After adding more permissions i've successfully enabled all these fancy features.
Probably other devices like I9505 and I9500 have (but disabled) these features.
So, what you can expect from this mod:
Floating windows
up to 4 windows displayed side-by-side (instead of 2 max in original version)
Resizable borders for floating windows.
Icons of collapsed windows (displayed on top of any application)
You need to unzip attached file into /system/etc/permissions and then reboot.
It may or may not work for specific device. It also may depend on Android version. People in Note 3 thread report it as not working in KK ROMs, but remember they deal with APK which may work not correctly on KK. Also my zip contains more missed permissions and it may help to enable it on KK.
This works on:
I9506 ROMS: ML5, NA2
I9500 ROMS: MJ8
Let me know on which device and which ROM it works or not.
P.S.: I didn't move to KK yet.
Click to expand...
Click to collapse
I have tried this on my i9506 (SHV-E330S) on kitkat.
But unfortunately, still not working. (The quad view does works but, floating windows are not working)
I heard Note3's floating option is available by Penwindow Launcher app in playstore.
http://forum.xda-developers.com/showthread.php?t=2542988
*Sorry for bad english
---------- Post added at 03:00 PM ---------- Previous post was at 02:50 PM ----------
Albe95 said:
Does Floating Windows work with this mod on KitKat Rom (touchwiz based)?
Click to expand...
Click to collapse
Not now, but maybe It can be possible.
To get floating window from now, use XHaloFloatingWindows on Xposed Framework Modules or Try below links to get pen window (simillar feature with floating windows)
http://forum.xda-developers.com/showthread.php?t=2542988
I didn't migrate to KitKat yet because i'm waiting for kernel source code. I will look into possibility to enable it without Xposed hacks when i will install KitKat.
Actually, floating windows are more gimmick than real useful function. Application inside such window has truncated view.
For now to get floating window I use floating app mod + Gmd Air command and it work well.
is it working on i9505 too?
EDIT:
yes, it is! i tested it on my i9505 with carHD rom 15.1
there are some screenshots.
Many Thanks to YOU! Works like a Charm.
Hello
Just tested and it works fine with GT-I9505 and Omega V19.
-MVKA
Worked 100% on i9500 omega v17 thanks alot
Sent from my GT-I9500 using XDA Premium 4 mobile app
This is great. Really good! Works perfect on Echoe 12.1. JB.
Sent from my GT-I9505 using Tapatalk
do i need to be rooted? does it worked on JB 4.3 stock touchwiz i9505? sorry im confused..Thank you and sorry for my english
Works like a charm with Omega v16 on my I9500. Thanks!
Enviado de meu GT-I9500 usando Tapatalk
jj153 said:
do i need to be rooted? does it worked on JB 4.3 stock touchwiz i9505? sorry im confused..Thank you and sorry for my english
Click to expand...
Click to collapse
Any modification in system folder requires root.
Or if you know how to inject files into system.img.ext4 firmware part, then you can pre-inject the files and then flash through Odin. In this case root isn't required.
I have to say, I think this mod is great. I cant believe its not more popular :-/
I find myself using the Multiwindow launcher more than my App tray now. I agree for most apps the 'floating windows' are not very practical, however, I do seem to find myself using it a lot.
Hi everyone.
Is there any way to have this in my I9506 4.2.2 Stock rom?
I have tried this but nothing happens. :crying:
Thanks
sorg said:
Any modification in system folder requires root.
Or if you know how to inject files into system.img.ext4 firmware part, then you can pre-inject the files and then flash through Odin. In this case root isn't required.
Click to expand...
Click to collapse
I am interested in doing this on i9505 official lollipop. Would you have any advice for me? I'm not very experienced. Thankyou
Works perfectly well on I337M stock Lollipop. Should work on 9505 Lollipop too.
Great
It works on my Galaxy S5 Lollipop. But floating window don't have close button :good:
jasonoddy said:
I am interested in doing this on i9505 official lollipop. Would you have any advice for me? I'm not very experienced. Thankyou
Click to expand...
Click to collapse
It works very well.
neodevkr said:
I have tried this on my i9506 (SHV-E330S) on kitkat.
But unfortunately, still not working. (The quad view does works but, floating windows are not working)
I heard Note3's floating option is available by Penwindow Launcher app in playstore.
http://forum.xda-developers.com/showthread.php?t=2542988
*Sorry for bad english
---------- Post added at 03:00 PM ---------- Previous post was at 02:50 PM ----------
Not now, but maybe It can be possible.
To get floating window from now, use XHaloFloatingWindows on Xposed Framework Modules or Try below links to get pen window (simillar feature with floating windows)
http://forum.xda-developers.com/showthread.php?t=2542988
Click to expand...
Click to collapse
Dont be sorry for ur english, just dont quote the whole op..
Related
Mod edit: This thread is for the country specific hardware relase of S4 in Korea. The hardware is different and there are couple of things which require different treatment regards rooting, flashing etc.
No trolling/flaming shall be tolerated here. Users of this thread are requested to report posts and avoid engaging in such.
I opened this thread and post the things useful for someone
//////////////////////////////////////////////////////////////////////
====================================================
[ Firmware Download External Hyperlinks ]
====================================================
ME7 for E300S/K/L
http://forum.xda-developers.com/showthread.php?p=42093687#post42093687
Thx for aslak89
MH2 for E300S
http://forum.xda-developers.com/showpost.php?p=44873028&postcount=649
Thx for soundping
MF3 for E300K
http://forum.xda-developers.com/showpost.php?p=42756696&postcount=301
Thx for koe1974
//////////////////////////////////////////////////////////////////////
====================================================
[ FAQs ]
====================================================
Q1 : How to increase the abnormal limitness of volume of earpieces?
A :
http://koganefusube.blog.me/70167096326
SGS4 in South Korea has Yamaha's sound codec(YMU831) and the parameters of all of the volumes can adjustable in rom.
/system/etc/ysound.xml does, and I found that the stock values of them limited in 81.
I just changed from 81 to 100 and tested on my sgs4.
-----------------------------------------------------------------
Q2 : What recovery can I use?
A :
You can use recoveries for i9500(not 9505) to E300S, E300K(I can't sure for E300L but if you know clearly plz post that)
Now I'm using Chenglu's touch CWM 6.0.2.3 and flashing update.zip and making/restoring CWM backups are working fine.
Chenglu's recovery => http://forum.xda-developers.com/showthread.php?t=2267820
-----------------------------------------------------------------
Q3 : How to set the wallpaper in the full resolution without the notification bar?
A :
http://koganefusube.blog.me/70167678454
A way to solve this is editing stock sammy wallpaper application.
-----------------------------------------------------------------
Q4 : How to root?
A :
1. Change your recovery be CWMed.
Like uppon FAQ, I suggest you Chenglu's CWM Recovery.
http://forum.xda-developers.com/showthread.php?t=2267820
2. Download SuperSU v1.32
http://forum.xda-developers.com/showthread.php?t=1538053
3. Reboot into recovery mode(VolUP + Power + Home button for few seconds)
4. Flash SuperSU v1.32 you downloaded.
5. Reboot your phone.
6. Enjoy
In 20130519, phyb the developer in matcl announced his work. Thx to him if you want and helped by for your geeky smartphone life
※ You'll meet an error if you disabled and re-enabled su via SuperSU. If you do that, a way to reroot as flawless is just rebooting your sgs4. Then, SuperSU will work fine.
-----------------------------------------------------------------
Q5 : What EQ or audio effect can I use? Stock MusicFX is boring and useless
A :
I suggest you 'ViPER4Android' if you got root your SGS4.
http://forum.xda-developers.com/showthread.php?t=2191223
I tested and applied flawless on my SHV-E300S.
It's funtionality is awesome and better than MusicFX or any EQ apps which doesn't require root permissions.
※ Note : Be sure CWM backup first for something unpredicatable situations, and some of functions in this mod consumes battery and system resources much than before you applied.
-----------------------------------------------------------------
Q6 : I can't access the hidden modes from inputting 319712358 via dial pad to change the settings about RIL
A :
E300S can access skt hidden mode with 'skt hidden mode +'. You can search it on Google Play.
I don't know about other ones(sorry) but if you know about the another way like this post the reply anytime
-----------------------------------------------------------------
Q7 : I want to hide the suggested application list when I plug my earbirds at my sgs4. How can I?
A :
Unfortunately, SGS4 doens't have the setting UI about PageBuddy unlike previous sammy android smartphones
So if you want to do that, debloat all of the apps about PageBuddy.
(Or maybe just disable PageBuddyNotiSvc in Settings? I can't sure about this... if someone try and this is the way what I meant, post the reply anytime )
-----------------------------------------------------------------
Q8 : My sgs4 mobile data connection looks slow even if I connected in LTE. What should I do to be better?
A :
Disable fast dormacy and disable geltle fair sleeper.
You can use gokhanmoral's FastDormacy toggle in SGS4 to disable fasl dormacy
and you can disable gentle fair sleeper with inputting a line in terminal.
( echo "NO_GENTLE_FAIR_SLEEPERS" > /d/sched_features )
You can apply this code as init.d script or any apps doing like this
-----------------------------------------------------------------
Q9 : I want to change the color of notification bar and panel. What should I do?
A :
Install Xposed Framework and Nottach Xposed.
Xposed Framework : http://forum.xda-developers.com/showthread.php?t=1574401
Nottach Xposed : http://forum.xda-developers.com/showthread.php?t=2285074
Note : Nottach Xposed is not for SGS4 in Korea as official so if you meet any bugs in use, that's not a bug. Just not fit for.
Note : Don't change the battery icon. If you do that, Nottach Xposed will be applied as abnormal.
-----------------------------------------------------------------
Q10 : Default background of Holo UI looks not fit for XXHDPI(FHD). Can I change it?
A :
Install Xposed Framework and DitheredHoloBackground
and use the app what I uploaded in this thread.
DitheredHoloBackground : http://forum.xda-developers.com/showthread.php?t=2173001
-----------------------------------------------------------------
Q11 : How to remove the carrier logo on the status bar with editing SystemUI.apk?
A :
1) Open the SystemUI.apk with Alzip
2) Go to res\drawble-xxhdpi and change tw_stat_notify_operator_logo.png into a picture filled blank with overwriting that file.
I attached an image file to change.
Note : If you just delete this image file in SystemUI.apk you want to edit and reboot after paste this, you'll be under endless reboot.
3) Paste the SystemUI.apk into your phone and reboot
-----------------------------------------------------------------
Q12 : Is there a way to make a CWM backup and restore it as easy?
A :
You can use Online Nandroid Backup and Nandroid Manager,
You can make a CWM backup without rebooting into recovery via Online Nandroid Backup.
(Note : If you want to use this flawless, install busybox stericson's one)
You can restore a cwm backup and flashing 'update.zip's as you want as possible without rebooting into recoveryt via Nandroid Manager.
//////////////////////////////////////////////////////////////////////
====================================================
[Thread chagelog]
====================================================
:: 20130520
- Renamed the thread to add SHV-E300L(good suggestion from yakie47)
:: 20130521
- Changed the method to root.
:: 20130608
- Added some of questions
- Added firmware links
:: 20130619
- Added MF3 firmware link for E300S
- Added the numbers behind the questions
- Added a notification in Q9
- Added Q11 : How to remove the carrier logo on the status bar with editing SystemUI.apk?
:: 20130623
- Edited Q9
- Added a MF3 torrent link for E300K(thx for koe1974)
- Added Q12
:: 20130824
- Added new firmware link for E300S(thx for soundping)
- Added my new script for any SGS4s. It should make your SGS4 into better in performance
Use these with apps to run init.d scripts(SManager or Universal IInit.d or anyone else...) or the kernel supports init.d.
//////////////////////////////////////////////////////////////////////
Let's roll guys share the informations as we can as possible :highfive:
Thx for starting this thread ★★★
Sent from my SHV-E300K using xda app-developers app
Hi, does the root method in this link work on SHV-E300s?
http://digitalmisc.com/how-to-root-the-international-variant-of-samsung-galaxy-s4-19500shv-e300sk/
Does the S4 korean version work in the UK?
Do you know if the korean version will work with the UK networks?
darkrance said:
Hi, does the root method in this link work on SHV-E300s?
http://digitalmisc.com/how-to-root-the-international-variant-of-samsung-galaxy-s4-19500shv-e300sk/
Click to expand...
Click to collapse
Not only bootloader but also the fixed kernel.
In other words, it doesn't on latest one.
boymuic said:
Do you know if the korean version will work with the UK networks?
Click to expand...
Click to collapse
I don't know about the spec of band or carrier... sorry
marbulas said:
Not only bootloader but also the fixed kernel.
In other words, it doesn't on latest one.
Click to expand...
Click to collapse
Chenglu's method works though?
Thanks for the thread marbulus. You are wonderful. Keep up the great work. Once I can get time I will see about porting some roms for us....
Sent from my SHV-E300K using Tapatalk 2
Can someone please verify the exact steps on how to root SHV-E300s? I mean, do I need to install custom firmwares using Odin first before rooting, etc.
It's not only for me, but for others who have this device and want to root. And n00bs like me.
Hello marbulas,
Thank you for starting our S4 info and discussion thread.
I updated the root kernel supports init.d scripts an hour ago.
I think your scripts have been still the best in sgs2.
happy end of holidays
Sent from my SHV-E300S using XDA Premium HD app
Root?
Can you please post the rooted kernel? I can read Korean or Chinese and google translate can't translate the page for me. Also, it is asking for business information and things like that. It would be awesome if you could post it though. Thank you.
Here are ME6 rooted kernels which I repacked as supercurio's method.
Choose kernel to be matched with your carrier and flash it via Odin.
darkrance said:
Chenglu's method works though?
Click to expand...
Click to collapse
For now with latest sammy build, yes. Latest way to root is flashing kernel fixed for. All of latest sgs4s are same on this problem.
Fortunately, a way to root appeared. You'd check the main post
lunerceli said:
Can you please post the rooted kernel? I can read Korean or Chinese and google translate can't translate the page for me. Also, it is asking for business information and things like that. It would be awesome if you could post it though. Thank you.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=41589315&postcount=12
aslak12 posted. Thx to him
Thanks for the links. I am going to be trying this in a few. Keep up the great work and please don't forget our great phone. But which one of the files that were posted do I flash for root??
EDIT: Nevermind. I saw the differences between the files. I have to get some sleep or something. LOL.
Just updated via software update. File size is about 50+mb & it says improve stability. Updated & noticed phone running little smoother.
Sent from my SHV-E300K using xda app-developers app
Okay, so I flashed the rooted kernel and now I am getting random reboots. Is there any way that you could fix this please? Thank you.
---------- Post added at 02:18 PM ---------- Previous post was at 02:11 PM ----------
One thing that I would do to help make this thread complete is to add the stock non rooted kernels to the OP. That way if someone messes up they can fix their phone without any problems.
I haven't updated to the ME6 firmware yet. I still have the stock firmware (out of the box) MDK. Do I have to update/flash the kernel posted here to root?
aslak89 said:
Here are ME6 rooted kernels which I repacked as supercurio's method.
Choose kernel to be matched with your carrier and flash it via Odin.
Click to expand...
Click to collapse
darkrance said:
I haven't updated to the ME6 firmware yet. I still have the stock firmware (out of the box) MDK. Do I have to update/flash the kernel posted here to root?
Click to expand...
Click to collapse
Do it if you want or not if you don't have to.
lunerceli said:
Okay, so I flashed the rooted kernel and now I am getting random reboots. Is there any way that you could fix this please? Thank you.
---------- Post added at 02:18 PM ---------- Previous post was at 02:11 PM ----------
One thing that I would do to help make this thread complete is to add the stock non rooted kernels to the OP. That way if someone messes up they can fix their phone without any problems.
Click to expand...
Click to collapse
If you have stock sammy rom, you don't have to look for the stock kernel.
Just make a copy the stock rom and open the tar package with data compressing softwares(alzip?) and delete files except boot.img in the tar package. Then, that's the stock kernel to turn back.
This fix is for those who like to use AllShareCast/ScreenMirrorwhile on custom ROM (i.e. custom flag is set).
Disclamer: You apply the fix at your own risk. I'm not responsible for any software or hardware damage it can lead. The only thing i can assure is that i've tested fix on my I9500 and I9506 devices and they work fine.
Disclamer 2: I don't provide any technical support for my fixes through PM. So, please don't write PM about porting it to other ROM versions or other devices. I share what i'm doing for myself and have no intention to port it to devices i don't have.
This fix is not really fixes the problem, but turns off HDCP protection. So, the video signal will go to HDMI in clear(unprotected) form. As a side effect, this fix also will be useful for those, who has non-HDCP TV and thus cannot use Screen Mirror function.
I've made versions for 3 different SoCs, thus it should be compatible with almost full range of Samsung top devices:
Exynos 5410 for GT-I9500 Android 4.3 ROM MJ8
Snapdragon 600 for GT-I9505 Android 4.3 ROM MK8
Snapdragon 800 for GT-I9506(SHV-E330S/K/T) Android 4.3 ML5, SM-N9005 (and other SD800 versions of Note 3)
To install the fix, your device should be rooted!
You need to use file explorer which is able to write to /system partition. I recommend to use Root Explorer.
1) Open /system partition with write access ("mount R/W" button in Root Explorer)
2) Unpack following archive to specified folder:
for Android v4.3:
for Exynos 5410: unpack hdcpoff_5410.zip to /system/lib
for Snapdragon 600: unpack hdcpoff_sd600.zip to /system/lib
for Snapdragon 800: unpack hdcpoff_sd800.zip to /system/vendor/lib
for Android v4.4.2:
for Exynos 5410: unpack hdcpoff_5410_4.4.2.zip to /system/lib
for Snapdragon 600: unpack hdcpoff_sd600_4.4.2.zip to /system/lib
for Snapdragon 800: unpack hdcpoff_sd800_4.4.2.zip to /system/lib (not really required. HDCP should work fine on custom ROMS 4.4.2)
3) reboot your device.
That's all!
I didn't test my fix neither on I9505 nor N9005, but in theory it should work.
Update (30/Aug/2014):
I've added Android 4.4.2 HDCP OFF version for I9500 (I9500XXUGNG3), for I9505 (I9505XXUGNG8). It should work on any 4.4.2 ROM.
About Snapdragon 800 version (i9506, E330S, Note 3 Qualcomm version): it's funny, but my E330S (with old 4.2.2 bootloader and I9506 4.4.2 system) works without any fix. It uses HDCP although my kernel and system are custom with a lot of bloatware (including KNOX) removed. It works with both Samsung AllShareCast and Netgear PTV3000.
I've uploaded patched lib for SD800 (I9506XXUCNG3) for any case (unpack to /system/lib).
Update 2:
added N9005 4.4.2 version. You can try it on other N900x models as well (SD800 only!).
For Galaxy S5 (SM-G900 not sure Exynos or Qualcomm) look here (not tested by me)
For generic Exynos solution look here (not tested by me)
P.S.: If you are skilled enough, then you can port this fix to other version of ROM. Quick hint: Disassemble my fix and original file in IDA Pro, then compare listing to find the difference. And then, using some keywords near modified part, you can locate required places in the new version.
Generally, the versions I provide should work in any ROM within the same Android version.
Thank you
Enviado desde mi GT-I9500 mediante Tapatalk
Thannks......
Sent from my GT-I9505 using Tapatalk
Yahoo... is works on MY 9505..
THANKS MY MAN..
send my signature phone to XDA w bad grammars
sorg said:
This fix is for those who like to use AllShareCast/ScreenMirrorwhile on custom ROM (i.e. custom flag is set).
Disclamer: You apply the fix at your own risk. I'm not responsible for any software or hardware damage it can lead. The only thing i can assure is that i've tested fix on my I9500 and I9506 devices and they work fine.
Disclamer 2: I don't provide any technical support for my fixes through PM. So, please don't write PM about porting it to other ROM versions or other devices. I share what i'm doing for myself and have no intention to port it to devices i don't have.
This fix is not really fixes the problem, but turns off HDCP protection. So, the video signal will go to HDMI in clear(unprotected) form. As a side effect, this fix also will be useful for those, who has non-HDCP TV and thus cannot use Screen Mirror function.
I've made versions for 3 different SoCs, thus it should be compatible with almost full range of Samsung top devices:
Exynos 5410 for GT-I9500 Android 4.3 ROM MJ8
Snapdragon 600 for GT-I9505 Android 4.3 ROM MK8
Snapdragon 800 for GT-I9506(SHV-E330S/K/T) Android 4.3 ML5, SM-N9005 (and other SD800 versions of Note 3)
To install the fix, your device should be rooted!
You need to use file explorer which is able to write to /system partition. I recommend to use Root Explorer.
1) Open /system partition with write access ("mount R/W" button in Root Explorer)
2) Unpack following archive to specified folder:
for Exynos 5410: unpack hdcpoff_5410.zip to /system/lib
for Snapdragon 600: unpack hdcpoff_sd600.zip to /system/lib
for Snapdragon 800: unpack hdcpoff_sd800.zip to /system/vendor/lib
3) reboot your device.
That's all!
I didn't test my fix neither on I9505 nor N9005, but in theory it should work.
P.S.: If you are skilled enough, then you can port this fix to other version of ROM. Quick hint: Disassemble my fix and original file in IDA Pro, then compare listing to find the difference. And then, using some keywords near modified part, you can locate required places in the new version.
Generally, the versions I provide should work in any ROM within the same Android version.
Click to expand...
Click to collapse
Thank you so much, I can confirm, it works on i9505 with ML6
Has anybody tried this with NA5 kitkat?
Sent from my GT-I9505 using XDA Premium 4 mobile app
Finally search is over!!
Thanks a lot, it works on M919 with MK2 :good:
@sorg could you provide the original libs for each version, or at least for both snapdragon patches? Would be appreciated so I can diff your changes and apply to my lib
Thanks
CNexus said:
@sorg could you provide the original libs for each version, or at least for both snapdragon patches? Would be appreciated so I can diff your changes and apply to my lib
Click to expand...
Click to collapse
Agreed, Great Work OP. and Thanks!
finally! I9505 Omega rom confirmed. Works perfect! Thanku you so much
CNexus said:
@sorg could you provide the original libs for each version, or at least for both snapdragon patches? Would be appreciated so I can diff your changes and apply to my lib
Click to expand...
Click to collapse
I don't think sorg likes to do that kind of stuff. Maybe he think's it's too easy. In any case, I got it started before going to work...
https://www.dropbox.com/s/dvgpy0c21rjm47m/allsharework.zip
@sorg, this is currently working on my I9505 running Omega v19. Wish there was some way I could properly thank you?
Tronman said:
@sorg, this is currently working on my I9505 running Omega v19. Wish there was some way I could properly thank you?
Click to expand...
Click to collapse
Thank is enough.
sorg said:
Thank is enough.
Click to expand...
Click to collapse
I've tracked down most of the original files you patched and I'll post them in a sec.
@JoshBeach file below contains the original which you can use to compare
And here's a rough guide on how to get it done: http://forum.xda-developers.com/showthread.php?p=48418925
The original libs that match the patched libs from the OP are attached to this post for comparison and porting purposes
Will update when I track down the snapdragon 600 lib
EDIT: Snapdragon 600 added
studentjunk said:
I don't think sorg likes to do that kind of stuff. Maybe he think's it's too easy. In any case, I got it started before going to work...
https://www.dropbox.com/s/dvgpy0c21rjm47m/allsharework.zip
Click to expand...
Click to collapse
Some ppl first throw *hit to me simply because they didn't get what they wanted and then come here to ask something. I have no feeling to answer such blacklisted person. If their insulting posts have been deleted, it doesn't change my attitude to them.
I've already found and posted the stock libs for myself and others. Thanks for extending the patch to snapdragon devices, I'll be porting it to other devices soon.
Thank you very very very much
Sent from my GT-I9505 using XDA Premium 4 mobile app
oh thank god, i spent ages looking for this on my i9305... at least now my S4 has it fixed
thanks mate!
Could someone port this to i9505 - NA5 (KitKat)?
Sent from my GT-I9505 using XDA Premium 4 mobile app
This is the mod that's going to turn your Grand 2 into an S5 ... in one click!
Features:
- Note 3 Air Command (excluding S Note)
- S5 Weather
- S5 Gallery
- S5 Browser
- S5 clock widget
- S5 dialer + contacts
- S5 Messaging
- S5 Story Album
- S5 Group Play
- S5 Music
- S5 Calculator
- S5 Email
- S5 TouchWiz Home with S5 My Magazine
- S5 Boot Animation
- S5 Kids Mode (non-functional)
- S5 S Memo
- S5 FM Radio
- S5 S Note (removed as of Version 2, made available as an optional download as of Version 4)
- S5 S Planner + Widget
- S5 My Files
- S5 framework-res.apk for the S5 “teal” hues and visual styles everywhere.
- S5 Video Player
- S Finder
- S5 Lockscreen
- S5 notification toggles (enhanced in Version 3 Service Pack 0.5)
Screenshots:
Kindly go to the Screenshots tab. You can find that at the top of the page.
New screenshots! See the Screenshots tab.
(Jan. 14th, 2015)
Limitations and Bugs:
- No Toolbox yet.
- Ultra Power Saving Mode not accessible from Settings. An Xposed module provides access to Ultra Power Saving Mode.
- You have to make sure your front camera resolution is 0.3 MP before installation.
Links!
Link to the latest version: https://mega.co.nz/#!HN1EhRzR!mYbtPk1B16S-IE1z4Wabz5o1b52G8TCIZ0HBx0Hid1c
MediaFire link (thanks Rahul10 !): http://www.mediafire.com/download/koex0e4v9ps9uhm/Ver4Remix_S5ModsByWaseem.zip
H
Test branch: link_here
Before installing, set the front camera's resolution to 0.3 MP.
If you face FCs, wipe the data and cache of the problematic app.
The next version of this mod is in the build ... see this announcement post for the plan ...
For users with less than 10 posts, questions and answers have moved over to this thread .
Please use the above tabs as they have every single thing you need.
You're welcome to give reviews!
Feature requests are also needed to give me an idea or two, inspired by YOU! Thanks for cooperation.
The mod doesn't work on firmwares after NH6.
I'm investigating that.
For details, see http://forum.xda-developers.com/showpost.php?p=57349074&postcount=516
XDA:DevDB Information
The Ultimate S5 Mod, Theme for the Samsung Galaxy Grand 2
Contributors
WaseemAlkurdi, Rahul10, adityapal, my dear friend Saif Alaqqad for introducing me to Android modding!
Version Information
Status: Stable
Current Stable Version: 4.0 Remix
Stable Release Date: 2014-09-13
Current Beta Version: 4.0
Beta Release Date: 2014-09-21
Created 2014-08-13
Last Updated 2015-01-14
Reserved
Frequently Asked Questions:
Q. Settings gives a "Unfortunately, Settings has stopped."
A. Use a root file explorer (like ES File Explorer) and delete /system/priv-app/SecSettings.odex (fixed in Version 3 and above).
Q. The AccuWeather widget fails.
A. Go to Settings -> Application Manager -> the System tab -> Weather -> Clear Data. Repeat with Unified Daemon if you face more problems.
Q. My Files fails.
A. Apply the Settings steps, but delete /system/app/SecMyFiles.odex OR /system/app/SecMyFiles.odex
All Force Close messages are fixed in Version 3 Service Pack 1.
Q. Wi-Fi Direct/Bluetooth/Something else in Settings Force Closes.
A. I'm fixing that.
Q. Build NH4 becomes a wreck with Force Close messages!
A. Use NH6.
Reserved
Reserved.
WaseemAlkurdi said:
This is the ultimate S5 mod that everyone was waiting for ... a single flashable ZIP to turn into an S5! This single ZIP file is flashable via recovery and does everything automatically ...
Features:
Automatic S5 APK installation
S5 notification and multitasking mod
AccuWeather widget mod
And many more ...
This is GenNxt's Addon Pack, but ported to Samsung stock instead of GenNxt.
XDA:DevDB Information
One Stop S5 Mod, Theme for the Samsung Galaxy Grand 2
Contributors
WaseemAlkurdi, balliboxer
Version Information
Status: Beta
Current Stable Version: 1.0
Stable Release Date: 2014-08-13
Created 2014-08-13
Last Updated 2014-08-13
Click to expand...
Click to collapse
it already work with Stock rom so why need of this bro
please post some screenshot ..please...
Emmm.. So where's the download link? Is it works with latest G8 firmware? Screenshots please.. Thanks..
Wait, one more thing, what's the different between your previous addon in this thread?
micu999 said:
Emmm.. So where's the download link? Is it works with latest G8 firmware? Screenshots please.. Thanks..
Wait, one more thing, what's the different between your previous addon in this thread?
Click to expand...
Click to collapse
Both mods are complementary, where this mod is for everything but Settings and the other is the Settings app only.
aapav01 said:
it already work with Stock rom so why need of this bro
Click to expand...
Click to collapse
GenNxt's mod does NOT work with Samsung stock. It only works with GenNxt. If it worked, then this mod would've never seen the light of the day.
aapav01 said:
it already work with Stock rom so why need of this bro
Click to expand...
Click to collapse
Are you a Grade 10 student? So you are as old as me!
Which firmware base do i need to flash in order to get this addon into my grand2? G3/G4/G8? Is it OK whether i came from latest G8 official kitkat stock based firmware?
WaseemAlkurdi said:
Are you a Grade 10 student? So you are as old as me!
Click to expand...
Click to collapse
I'm Grade 12 student?? Just 2 yrs ... Not a Big deal
---------- Post added at 06:42 PM ---------- Previous post was at 06:40 PM ----------
WaseemAlkurdi said:
GenNxt's mod does NOT work with Samsung stock. It only works with GenNxt. If it worked, then this mod would've never seen the light of the day.
Click to expand...
Click to collapse
o Really .......... Im using it..... just flashed deodex addon and ready to go to use all mod and addon
micu999 said:
Which firmware base do i need to flash in order to get this addon into my grand2? G3/G4/G8? Is it OK whether i came from latest G8 official kitkat stock based firmware?
Click to expand...
Click to collapse
I have tested with G4. But I don't think there's a problem if using different builds, as long as they are 4.4.2
aapav01 said:
I'm Grade 12 student?? Just 2 yrs ... Not a Big deal
---------- Post added at 06:42 PM ---------- Previous post was at 06:40 PM ----------
o Really .......... Im using it..... just flashed deodex addon and ready to go to use all mod and addon
Click to expand...
Click to collapse
I attempted to use it without the deodex thing, so it did not work for me! Thanks for the tip anyway!
i dunno why but after i installed your addon all of my phony-related-apps all gone.. wipe dalvik and partitions, wipe all data and reinstall the addon, i've tried everything the phone-contacts-etc are not there.. help me..
micu999 said:
i dunno why but after i installed your addon all of my phony-related-apps all gone.. wipe dalvik and partitions, wipe all data and reinstall the addon, i've tried everything the phone-contacts-etc are not there.. help me..
Click to expand...
Click to collapse
This is because you have flashed some other mods into /system. Flash stock using Odin or restore a backup, then flash again. You can also dig into that /system/app and delete unused crap to save space, then reflash the mod. This happened because you don't have enough free ROM space, so the CWM installer did not copy the files (in your case, SecContacts.apk, SecTeleService.apk, and InCallUI.apk). For starters, you can remove S Voice and AllShare.
WaseemAlkurdi said:
This is because you have flashed some other mods into /system. Flash stock using Odin or restore a backup, then flash again. You can also dig into that /system/app and delete unused crap to save space, then reflash the mod. This happened because you don't have enough free ROM space, so the CWM installer did not copy the files (in your case, SecContacts.apk, SecTeleService.apk, and InCallUI.apk). For starters, you can remove S Voice and AllShare.
Click to expand...
Click to collapse
First of all, my phone is brand new 1 day old, i came from latest G8 firmware updated via OTA, rooted with your instructions in another thread, and flashed the zip file step by step and i did it carefully.. But after first boot all of my telephony app went missing.. Everything back to normal bcoz i flash stock rom..
UPDATE : i tried everything, reflash stock ROM - rerooting via CWM from your suggestion - reflash zip addon.. aaaaand it's gone..
NB : if i may add, could you please add dial app with dual sim support, in the screenshots the dial app seems only support single sim. thanks.
micu999 said:
First of all, my phone is brand new 1 day old, i came from latest G8 firmware updated via OTA, rooted with your instructions in another thread, and flashed the zip file step by step and i did it carefully.. But after first boot all of my telephony app went missing.. Everything back to normal bcoz i flash stock rom..
UPDATE : i tried everything, reflash stock ROM - rerooting via CWM from your suggestion - reflash zip addon.. aaaaand it's gone..
NB : if i may add, could you please add dial app with dual sim support, in the screenshots the dial app seems only support single sim. thanks.
Click to expand...
Click to collapse
Your problem happened with me when I flashed this mod to a friend's Grand 2. This is because there's much junk in the ZIP. I fixed that, in addition to adding Note 3 Air Command. The update will be released tomorrow in the main post.
About the dialer, it does support Dual SIM, but I had only one SIM in the device when I took the snapshots.
And thanks for your effort. I'll notify you in PM when I upload the updated ZIP.
is it really able to isntall it to stock rom G8
i am using stock rom xse g8 4.2.2 (yes it rooted)
can i install it on my phone ?
thx in advance for your answer ... :fingers-crossed:
WaseemAlkurdi said:
Your problem happened with me when I flashed this mod to a friend's Grand 2. This is because there's much junk in the ZIP. I fixed that, in addition to adding Note 3 Air Command. The update will be released tomorrow in the main post.
About the dialer, it does support Dual SIM, but I had only one SIM in the device when I took the snapshots.
And thanks for your effort. I'll notify you in PM when I upload the updated ZIP.
Click to expand...
Click to collapse
But in my GG2 the dialer app only show one call button eventhough i had 2 sims in my phone.. And could you separate those note 3 feature in different zip file? so several people wont suffer like i do.. Thanks..
NB: please add quick settings toggle a la S5.. Thank you very much.. Have a nice day..
micu999 said:
But in my GG2 the dialer app only show one call button eventhough i had 2 sims in my phone.. And could you separate those note 3 feature in different zip file? so several people wont suffer like i do.. Thanks..
NB: please add quick settings toggle a la S5.. Thank you very much.. Have a nice day..
Click to expand...
Click to collapse
I'm going to investigate this issue. I (and you) may have to wait till old Sam makes a new phone with the S5 UI (dialer+contacts) AND Dual SIM.
About separating the Note 3 features, that's a really god idea!
And, oui, monsieur, what do you mean by saying "S5 toggles"? Well, I got them, even in the old mod. Except if you mean something else.
P.S. Can't you keep changing SIMs from the widget or the Notification Panel as a temporary fix?
This is based on @BeansTown106 G900VVRU1ANE9 Stock Deodexed Rom Go Thank him
Changes 8-27:
Remapped hard keys with replaced Recents with Menu & LongPress Home for Recents
Add Samsung browser
International Dialer and Contacts Updated
Removed More Bloat
Set status bar brightness to 100%
Added Android L Boot Animation
Added a Debloat Script in a zip to remove more samsung services
Features
Rooted
BusyBox
Zipaligned
Init.d support
Knox-Free
Removed Tether Provisioning checks
Removed SeLinux Updater
Removed Verizon OTA updater
Removed 200mb Worth of How-To Videos.. (Seriously Verizon?!?!?)
Read/Write to external storage
Working Art
Call Recording
International SecMMS SecContacts and SecPhone
Downloads
KLTEVZW_NE9_STOCK_8_27.zip
Debloater_LITE_KK.zip Use To Remove More Samsung Apps And Services
KLTEVZW_NE9_STOCK_8_24.zip
Thanks to these guys
- Geohot (For Root)
- Hashcode0f (For SafeStrap)
- Beanstown106 (For Base ROM)
- EMSPloit (For MODS/Toggles)
- Archikitchen & Others (Kitchen To Make ROM)
- Versatile1
View attachment 2910992View attachment 2910993View attachment 2910994View attachment 2910995View attachment 2910997
Nice, great to see some new options - it being relatively quiet lately. Love the darker intl theme - dont understand why they went with the ugly teal/white business everywhere else. Thanks for this!
Thank you jrkruse
Sent from my SM-G900V using Tapatalk
Awesome great to have a option with the dark Dialer & MMS from the international variant
Thanks buddy just wanted to say that I loved your roms from the S4 and I know you don't have the option for unlocked boot loader with this guy but I've been searching for this dark MMS forever and haven't found one that actually works with the Verizon version. Thank you so much for all your hard work buddy appreciate it!
PS. If you can please make a version of this without all the stock crap that comes with it (Verizon Bloat, Amazon Bloat, etc.)
THANKS AGAIN!
mdonnelly1127 said:
Thanks buddy just wanted to say that I loved your roms from the S4 and I know you don't have the option for unlocked boot loader with this guy but I've been searching for this dark MMS forever and haven't found one that actually works with the Verizon version. Thank you so much for all your hard work buddy appreciate it!
PS. If you can please make a version of this without all the stock crap that comes with it (Verizon Bloat, Amazon Bloat, etc.)
THANKS AGAIN!
Click to expand...
Click to collapse
Here is a link to the International APK's Just flash them on what ever rom you like
jrkruse said:
Here is a link to the International APK's Just flash them on what ever rom you like
Click to expand...
Click to collapse
Dude you are the man as always! Thank you!
Innovation isn't slowing..
jrkruse said:
Here is a link to the International APK's Just flash them on what ever rom you like
Click to expand...
Click to collapse
do you plan on making a patch to run international roms on verizon like you did with the GS4?
cjohnsonthe2nd said:
do you plan on making a patch to run international roms on verizon like you did with the GS4?
Click to expand...
Click to collapse
Working on one right now. So far its not going so well more things are kernel dependent than the S4. But I'll figure it out hopefully.It takes longer testing with safestrap when you screw up flashing roms that arent meant to be used its odin time so it takes longer when you have to start from scratch. I am uploading a NE9 rom right now thats debloated and has a few more mods added it should be ready soon.
its not easy to get a g900f rom to run on g900v without breaking certain things.. i havent managed it at all lol
Sent from my SM-G900V using XDA Free mobile app
Updated Rom
Here is a more slimmed down rom
Changes 8-27:
Remapped hard keys with replaced Recents with Menu & LongPress Home for Recents
Add Samsung browser
International Dialer and Contacts Updated
Removed More Bloat
Set status bar brightness to 100%
Added Android L Boot Animation
KLTEVZW_NE0_STOCK_8_27.zip
Here is a Debloat Script to Remove more samsung services.
Debloater_LITE_KK.zip
jrkruse said:
Here is a more slimmed down rom
Changes 8-27:
Remapped hard keys with replaced Recents with Menu & LongPress Home for Recents
Add Samsung browser
International Dialer and Contacts Updated
Removed More Bloat
Set status bar brightness to 100%
Added Android L Boot Animation
KLTEVZW_NE0_STOCK_8_27.zip
Here is a Debloat Script to Remove more samsung services.
Debloater_LITE_KK.zip
Click to expand...
Click to collapse
Flash this ROM yesterday .. it's awesome but am seeing new update now, I had to download again.
**Nice Update but I don't think remapping is a good idea
Pls post guide to revert that to default. .. thanks brother
Emmikem said:
Flash this ROM yesterday .. it's awesome but am seeing new update now, I had to download again.
**Nice Update but I don't think remapping is a good idea
Pls post guide to revert that to default. .. thanks brother
Click to expand...
Click to collapse
This will put the keys back to stock
stock_keymapping.zip
jrkruse said:
This will put the keys back to stock
stock_keymapping.zip
Click to expand...
Click to collapse
Thanks. .. I appreciate
Hey buddy do you have a link to a zip file to flash the Samsung stock browser?
Also just a request/suggestion but can you write a script to get rid of all the Verizon bloat (cloud,isis,tones,etc.) As well as all the Amazon Stuff too. Then this Rom would be top notch! More than it already is
mdonnelly1127 said:
Also just a request/suggestion but can you write a script to get rid of all the Verizon bloat (cloud,isis,tones,etc.) As well as all the Amazon Stuff too. Then this Rom would be top notch! More than it already is
Click to expand...
Click to collapse
The KLTEVZW_NE9_STOCK_8_27.zip already has all the verizon stuff removed.
jrkruse said:
The KLTEVZW_NE9_STOCK_8_27.zip already has all the verizon stuff removed.
Click to expand...
Click to collapse
Oh awesome didn't know. Thanks!
---------- Post added at 12:26 AM ---------- Previous post was at 12:26 AM ----------
jrkruse said:
The KLTEVZW_NE9_STOCK_8_27.zip already has all the verizon stuff removed.
Click to expand...
Click to collapse
Would u happen to have a flashable zip for the Samsung Stock Browser?
mdonnelly1127 said:
Oh awesome didn't know. Thanks!
---------- Post added at 12:26 AM ---------- Previous post was at 12:26 AM ----------
Would u happen to have a flashable zip for the Samsung Stock Browser?
Click to expand...
Click to collapse
Its on this page
This zip installs the QuickRemote app and enables the IR blaster to work on AOSP Lollipop ROMs for the LG G3 (and G2). Not every device or rom has been tested, so flash at your own risk.
Credits go to @sefnap for the original G2 port, @RieGo for the original scripts, and @zzeneg for updating to the G3 versions.
WORKAROUND DETAILS:
The default SELinux policy for android was changed to enforcing mode in Lollipop to increase security. This restricts the functionality of some apps, so for QuickRemote to work we have to change the SELinux policy back to permissive mode until we have a better solution.
This zip installs an init.d script which runs at boot and sets the SELinux policy, as well as other permissions. It will also create the file /sdcard/QRemote.log, which records the SELinux policy at startup.
INSTRUCTIONS:
--Make a backup (or at least download the uninstall)
--Install the latest SuperSU (highly recommended)
--Wipe dalvik/cache (just in case)
--Flash zip in recovery (TWRP or PhilZ)
--Reboot--
--It may take a moment for device manufacturers to load, so be patient.
TROUBLESHOOTING:
First, make sure init.d is enabled:
-Check for /sdcard/QRemote.log. If the file isn't there, the init.d script did not run.
---Enable init.d support with this app
-If it still isn't working after enabling init.d and rebooting, verify that SELinux was set to permissive at boot in QRemote.log
---Try this app to set the SELinux policy instead.If the QuickRemote app force closes when you open it:
-Make sure QuicksetSDK is installed. It won't be in the app drawer, so check Setting->Apps->All
-Clear QuicksetSDK data, delete /sdcard/Quickset Setup, reboot
Thanks to everyone in this thread for helping figure this thing out!
Working perfect on liquid smooth rom, thanks for posting this!
Thanks so much for posting this. Not being able to use Smart IR on AOSP has been killing me. I absolutely hate my LG TV remote. Will be testing on Beanstalk this evening.
confirm working for d855 on cm11... thanks
Any chance of a working QuickCircle port for AOSP?
It's the only thing that's holding me back from installing CM11. I refuse to give up on this case since I paid so much money for it god damn it
Thanks, it's work !
L10nH34Rt said:
Any chance of a working QuickCircle port for AOSP?
It's the only thing that's holding me back from installing CM11. I refuse to give up on this case since I paid so much money for it god damn it
Click to expand...
Click to collapse
I hope too. But I think on the G2 the quickwindow cover working on CM11 . Wait and see..
Quickset SDK has stopped.
Sent from my LG-D850 using XDA Free mobile app
Anyone tested this on CM12 yet?
if4ct0r said:
Anyone tested this on CM12 yet?
Click to expand...
Click to collapse
It isn't compatible with ART.
Joey43 said:
It isn't compatible with ART.
Click to expand...
Click to collapse
Sorry. I guess "- ART is supported" is a little misleading.
if4ct0r said:
Sorry. I guess "- ART is supported" is a little misleading.
Click to expand...
Click to collapse
I tried it on 5.0 and resulted in force closes and a broken app. Go ahead and download both files, if they work yippee, if not just flash the uninstall.
And let us know!
Sent from my LG-D851 using Tapatalk
if4ct0r said:
Sorry. I guess "- ART is supported" is a little misleading.
Click to expand...
Click to collapse
KitKat Art, and Lollipop Art, are two different creatures. I'd think that a port of the Lollipop version of this remote from the g3 leaks should work.
dictionary said:
KitKat Art, and Lollipop Art, are two different creatures. I'd think that a port of the Lollipop version of this remote from the g3 leaks should work.
Click to expand...
Click to collapse
Well, if it wouldn't, it wouldn't be a port, am I right?
I tried flashing it on Lollipop and using a different remote App and that didn't work either, even though the App recognized that the G3 has an IR-Blaster.
Guys, if you use a custom rom like CM12, you can make the flashable zip to work by doing the following.
First flash it normally, then grab from XDA the LGs lollipop version of QuicksetSDK, I think there should be a lollipop version, but I copied it from Android HD rom. Then replace the KitKat version with lollipop in in the System/app folder, set the correct permissions and voila it works. I have tested it on my Sony TV, it works like a charm. Good thing is that Smart Remote IR also works if interested to try.
Here's the Quickremote zip with the updated QuicksetSDK (For CM12!):
http://www.mediafire.com/?bbfbfefbnj7bj7k
I hope you don't mind me uploading this here @zzeneg, all credits are going to you! If you want me to, I'll take it offline immediately.
I think it should work on any 5.0 AOSP-Rom.
For some reason my IR-Blaster isn't working, the app launches, but the IR-Blaster just doesn't work.
Xerionius said:
Here's the Quickremote zip with the updated QuicksetSDK (For CM12!):
http://www.mediafire.com/download/bb...moteG3CM12.zip
I hope you don't mind me uploading this here @zzeneg, all credits are going to you! If you want me to, I'll take it offline immediately.
I think it should work on any 5.0 AOSP-Rom.
For some reason my IR-Blaster isn't working, the app launches, but the IR-Blaster just doesn't work.
Click to expand...
Click to collapse
Thanks mannnnnn. Now when it works I'll be happy. I wonder if it'll have a widget for pulldown
Sent from my LG-D851 using Tapatalk
---------- Post added at 12:57 AM ---------- Previous post was at 12:54 AM ----------
I wonder if the quick circle stuff can be added to cm
Sent from my LG-D851 using Tapatalk
Xerionius said:
Here's the Quickremote zip with the updated QuicksetSDK (For CM12!):
http://www.mediafire.com/download/bb...moteG3CM12.zip
I hope you don't mind me uploading this here @zzeneg, all credits are going to you! If you want me to, I'll take it offline immediately.
I think it should work on any 5.0 AOSP-Rom.
For some reason my IR-Blaster isn't working, the app launches, but the IR-Blaster just doesn't work.
Click to expand...
Click to collapse
link down?
rickriego said:
link down?
Click to expand...
Click to collapse
This is weird, the file wasn't down but the link changed.
I updated it, here's the new one: http://www.mediafire.com/?bbfbfefbnj7bj7k
Xerionius said:
This is weird, the file wasn't down but the link changed.
I updated it, here's the new one: http://www.mediafire.com/?bbfbfefbnj7bj7k
Click to expand...
Click to collapse
Getting a 38 kb file that won't flash? Tried downloading three times