Database Info

Where can i get stock KD1 without root?

I am rooted and running KD1 and im trying to unroot my phone for a repair. I cant seem to find stock KD1 without root and I really dont like Gingerbread. I checked the bible but theres nothing there... someone help

jalaldaniel said:
I am rooted and running KD1 and im trying to unroot my phone for a repair. I cant seem to find stock KD1 without root and I really dont like Gingerbread. I checked the bible but theres nothing there... someone help
Click to expand...
Click to collapse
I'm not aware of a non-rooted stock KD1. I think people are trying to get one built for those that want stock Froyo.
Given that you're sending it in for a repair, I'd suggest installing the stock 2.3.6 (KJ6) as it's a Samsung official release. Once you get it back you can go back to KD1 with root.

Thank you.

stephen_w said:
I'm not aware of a non-rooted stock KD1. I think people are trying to get one built for those that want stock Froyo.
Given that you're sending it in for a repair, I'd suggest installing the stock 2.3.6 (KJ6) as it's a Samsung official release. Once you get it back you can go back to KD1 with root.
Click to expand...
Click to collapse
Try this:
[ROM][CWM] T959VUVKD1 - Deodexed FIXED [6/9/2011]
Modems [KB5,KC1,KD1,KF1,KF2]
EDIT: You can unroot using SuperOneClick -- Though I have not tried it myself.
Here is another thread: Flashing back to KD1 with good information in it.

lumin30 said:
Try this:
[ROM][CWM] T959VUVKD1 - Deodexed FIXED [6/9/2011]
Modems [KB5,KC1,KD1,KF1,KF2]
EDIT: You can unroot using SuperOneClick -- Though I have not tried it myself.
Click to expand...
Click to collapse
I didn't realize you could unroot with it. Good info; thanks

I don't think you can unroot ROMs that were made.pre-rooted by just using SOC. I tried it before on a ROM (can't remember which) and it failed.
EDIT: If you didn't flash that file for root and instead rooted it with SOC previously, you can still unroot it.
If someone could be so kind to upload a Odin Stock KD1 without root, it would help solve some of these Froyo questions
Sent from my SGH-T959V using XDA App

vgcraze said:
I don't think you can unroot ROMs that were made.pre-rooted by just using SOC. I tried it before on a ROM (can't remember which) and it failed.
EDIT: If you didn't flash that file for root and instead rooted it with SOC previously, you can still unroot it.
If someone could be so kind to upload a Odin Stock KD1 without root, it would help solve some of these Froyo questions
Sent from my SGH-T959V using XDA App
Click to expand...
Click to collapse
Hmmm... I wonder if somebody else can confirm that you can't un-root an rooted ROM.
See if this works: [ROM][STOCK UVKD1 - FLASHABLE] T959VUVKD1 Zip File

Stock Firmware Site.
Here's a site I found useful. samfirmware.com. I used it to return both my Vibrant and SGS4G to stock using Odin.
Hope this can help someone.

rludlam1 said:
Here's a site I found useful. samfirmware.com. I used it to return both my Vibrant and SGS4G to stock using Odin.
Hope this can help someone.
Click to expand...
Click to collapse
This link I posted above - [ROM][STOCK UVKD1 - FLASHABLE] T959VUVKD1 Zip File - is the same file and was taken off of the samfirmware.com website.
Samfirmware.com doesn't have the files on their site anymore. They are SamMobile.com now.

This is a KD1 stock firmware one click file:
kd1-stock-sgh-t959v-one-click.jar

Just used samfirmware yesterday. Menu at the top of the page click mobile tab. Takes to a text box to choose your phone. There is all the samsung phones.
Sent from my SGH-T959V using xda premium

rludlam1 said:
Just used samfirmware yesterday. Menu at the top of the page click mobile tab. Takes to a text box to choose your phone. There is all the samsung phones.
Sent from my SGH-T959V using xda premium
Click to expand...
Click to collapse
Yes... but did you try to download the firmware?
When you do you are notified that the firmware has been moved to SamMobile.com for download.

FBis251 said:
This is a KD1 stock firmware one click file:
kd1-stock-sgh-t959v-one-click.jar
Click to expand...
Click to collapse
Going to try it out right now ill tell you how it goes

FBis251 said:
This is a KD1 stock firmware one click file:
kd1-stock-sgh-t959v-one-click.jar
Click to expand...
Click to collapse
Hey it's finally here thanks man

Worked flawlessly and i now have 432 MB of internal storage

Odin Back to Stock Issue

Ok...I want to update to ICS but idk what's wrong wit my Odin. I downloaded everything I needed when I first got the phone and I got it from....http://forum.xda-developers.com/showthread.php?t=1591601
[HOWTO][TAR][BLAZE 4G] THE ODIN THREAD :: Return to stock, fix soft brick :: 4/9/12...now when I use to return to stock it worked perfectly. Now when I need it the most its not. When I click on PDA and go to the folder with the TAR file is located...its not there. Well..its there...just Odin doesn't pick up on it I guess. Anybody know what's going on?
Sent from my SGH-T769 using xda app-developers app

Try this http://forum.xda-developers.com/showthread.php?p=32313738
Sent from my CM9 Blaze 4G

Kies asked for a code for a previous pc for me so that way didn't work. Can someone start a thread fore how to odin to stock ICS

itsLYNDZ said:
Kies asked for a code for a previous pc for me so that way didn't work. Can someone start a thread fore how to odin to stock ICS
Click to expand...
Click to collapse
It's been done several times. There's my thread on the link above and k0nanes
Sent from my CM9 Blaze 4G

I just downloaded the TAR and I read some of the comments and it kinda sounded like it kinda messed them up...now I'm scared lol
Sent from my SGH-T769 using xda app-developers app

How can i get rid of the custom Binary thing? I also testing my charge with Skyrocket app and it says slow charge. Its taking forever to charge with ICS. Im thinking I need to Odin to stock again, but dont really know how. Plus I dont want to wait another hour and a half to update ICS thru Kies again. Can i just flash the ICS version thru Odin with the blaze pit? Im hoping that would fix the awful battery life im getting too.

itsLYNDZ said:
How can i get rid of the custom Binary thing?
Click to expand...
Click to collapse
I'm running rooted stock ICS just like you, and have custom binary as well. I think having custom is normal. Before upgrading to ICS, it was Samsung Official, though.
Sent from my SGH-T769 using xda app-developers app

Sleeps17 said:
I'm running rooted stock ICS just like you, and have custom binary as well. I think having custom is normal. Before upgrading to ICS, it was Samsung Official, though.
Sent from my SGH-T769 using xda app-developers app
Click to expand...
Click to collapse
It likely comes from the custom recovery.bin - i.e. CWM recovery. It'll go away if you flash/Odin a stock variant.

jparnell8839 said:
Try this http://forum.xda-developers.com/showthread.php?p=32313738
Sent from my CM9 Blaze 4G
Click to expand...
Click to collapse
itsLYNDZ said:
How can i get rid of the custom Binary thing? I also testing my charge with Skyrocket app and it says slow charge. Its taking forever to charge with ICS. Im thinking I need to Odin to stock again, but dont really know how. Plus I dont want to wait another hour and a half to update ICS thru Kies again. Can i just flash the ICS version thru Odin with the blaze pit? Im hoping that would fix the awful battery life im getting too.
Click to expand...
Click to collapse
that's the only way I've been able to get rid of the custom binary thing. but I havent tried flashing stock ICS tar in odin. and yes you can, theres a link to the stock ICS tar somewhere

jparnell8839 said:
that's the only way I've been able to get rid of the custom binary thing. but I havent tried flashing stock ICS tar in odin. and yes you can, theres a link to the stock ICS tar somewhere
Click to expand...
Click to collapse
I'm seeing that people are having problems flashing the ICS tar in odin so I'm weary of doing anything until there's a guide. And kies asked for a code so that wouldn't work

[Q] Atrix 2 Soft Brick

Im not sure if this is in the wrong section, but im freaking out. I recently installed ROM Toolbox and changed the font on my phone. It has worked once before, but now when I tried it is stuck in boot. I can enter recovery and fastboot. I looked online and saw that there is a tutorial for flashing back to stock ics. Im scared about doing that as i recently learned that the bootloader is locked. If its not locked, would be this be the correct thing to flash 6.7.2_EDEM-18-SEARET_cfc.xml.z***ip. Here is the sight that has all the stock roms (not letting me post links yet. Any help would be greatly appreciated.

http://forum.xda-developers.com/showthread.php?t=1961310
Firmware Atrix 2 AT&T ICS 4.0.4 by "Firmware Team"
Sent from my MB865 using xda premium

willyyumm27 said:
http://forum.xda-developers.com/showthread.php?t=1961310
Firmware Atrix 2 AT&T ICS 4.0.4 by "Firmware Team"
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
Do I use this file in RSDLite? Sorry for being a noob.

BubbaThing said:
Do I use this file in RSDLite? Sorry for being a noob.
Click to expand...
Click to collapse
Yes you do
Sent from my MB865 using xda premium

willyyumm27 said:
http://forum.xda-developers.com/showthread.php?t=1961310
Firmware Atrix 2 AT&T ICS 4.0.4 by "Firmware Team"
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
Can you somehow post the file because the site is not letting me create an account?

The site keeps saying that it has an active policy against spammers? Can anyone post a file?

BubbaThing said:
The site keeps saying that it has an active policy against spammers? Can anyone post a file?
Click to expand...
Click to collapse
I guess, since your post count is low (< 10). This is the reason you are being prevented from attaching a file.

Just grab your fxz file from here:
http://sbf.droid-developers.org/edison/list.php
That is where all the fxz files are stored and you do not need an id/login to DL them from there. This is the link we always give people.
Just load the fxz file into RSD lite and flash it, and you should be good. Just wait for a while, it can take several min. to flash. Wait until RSD lite says PASS. Your phone will reboot several times while it flashes, that is normal.

jimbridgman said:
Just grab your fxz file from here:
That is where all the fxz files are stored and you do not need an id/login to DL them from there. This is the link we always give people.
Just load the fxz file into RSD lite and flash it, and you should be good. Just wait for a while, it can take several min. to flash. Wait until RSD lite says PASS. Your phone will reboot several times while it flashes, that is normal.
Click to expand...
Click to collapse
Thanks a lot, I flashed and rerooted and now its back to normal. Im not gonna be using rom toolboxever again.

How To Root Samsung Galaxy S3 On Android 4.1.2 Jelly Bean Official Firmware

If you are an owner of Galaxy S3 and have already updated your device to the latest firmware version, you may want to root it to gain full control over the phone. Here is an easy-to-follow step by step tutorial to help you perform a root on your International Samsung Galaxy S3 running Android 4.1.2 Jelly Bean.

this is the verizon section.

ddurandSGS3 said:
this is the verizon section.
Click to expand...
Click to collapse
And isn't original development
Sent from my VS920 4G using xda app-developers app

Development sections are only for development.
Thread moved to General.

lol...we dont even have 4.1.2 yet

aooga said:
lol...we dont even have 4.1.2 yet
Click to expand...
Click to collapse
And we probably won't officially get 4.1.2 for ages since we're on verizon LOL.

Chris123NT said:
And we probably won't officially get 4.1.2 for ages since we're on verizon LOL.
Click to expand...
Click to collapse
Yup...the all mighty verizon wireless. :angel:

It amazes me how Verizon states how big they are, yet are almost always the last to come out with updates....

sideoutjj said:
It amazes me how Verizon states how big they are, yet are almost always the last to come out with updates....
Click to expand...
Click to collapse
Customer base and update cycles are two completely different things. And judging by my coworker who has a gs3 and doesn't even know what a premuim suite update is and doesn't care, I think Verizon will be fine sending out updates whenever they want.

Were probably going to skip straight to 4.2
Sent from my SCH-I535 using xda app-developers app

cell128 said:
Were probably going to skip straight to 4.2
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
HA! What a joke! 10 bucks we dont get 4.2 this year.
*Im kidding..I'm not betting anyone 10 bucks.

Galaxy S4 will be out before that happens. Have my upgrade ready for when that happens.

jakson0100 said:
If you are an owner of Galaxy S3 and have already updated your device to the latest firmware version, you may want to root it to gain full control over the phone. Here is an easy-to-follow step by step tutorial to help you perform a root on your International Samsung Galaxy S3 running Android 4.1.2 Jelly Bean.
Click to expand...
Click to collapse
what is a gt i9305? this is the sch i535 section and the method fails!

Update released
The 4.1.2 Update was put out today

monfmonf said:
The 4.1.2 Update was put out today
Click to expand...
Click to collapse
You're about a week late to the party. Old news.
Sent from the Shark Tank using XDA premium

I apologize in advance for this noob question...
I rooted my s3 a couple of months ago. Now that 4.1.2 is out, how do I update & re-root it? Do I just download an updated rooted image & boot into recovery mode and flash it, or is there more to it than that? Any help is greatly appreciated!

Carolinaherps said:
I apologize in advance for this noob question...
I rooted my s3 a couple of months ago. Now that 4.1.2 is out, how do I update & re-root it? Do I just download an updated rooted image & boot into recovery mode and flash it, or is there more to it than that? Any help is greatly appreciated!
Click to expand...
Click to collapse
Just flash the rooted stock, then flash the radio and rpm. Much easier than updating and rerooting.
Sent from my SCH-i535 with Tapatalk 2
If I've helped, please hit the thanks button

tylerlawhon said:
Just flash the rooted stock, then flash the radio and rpm. Much easier than updating and rerooting.
Sent from my SCH-i535 with Tapatalk 2
If I've helped, please hit the thanks button
Click to expand...
Click to collapse
next dumb question...do you have a link to the radio and rpm files you are referring to?

Carolinaherps said:
next dumb question...do you have a link to the radio and rpm files you are referring to?
Click to expand...
Click to collapse
Android development section and look at the stickies.
Sent from my SCH-i535 with Tapatalk 2
If I've helped, please hit the thanks button

tylerlawhon said:
Android development section and look at the stickies.
Sent from my SCH-i535 with Tapatalk 2
If I've helped, please hit the thanks button
Click to expand...
Click to collapse
well, that didn't quite work
so I downloaded the file CF-Auto-Root-m3-m3zh-gti9305 (hopefully that was the right one for 4.1.2 rooted). I booted into recovery mode, started odin. Chose PDF and selected the file, hit Start. After about 15 seconds I get a "Fail" message. Phone won't boot at all. Did I select the wrong image? How do I get my phone back?
---------------------------------------------------------------------------
Thinking that this was the wrong file, I went to this thread: http://forum.xda-developers.com/showthread.php?t=2046439
and downloaded the For VRBMB1 (Jelly Bean 4.1.2) file. That updated correctly via Odin, and phone now reboots. Looks like it's still at 4.1.1 however....

Cannot Upgrade to ICS or JB P6200L - Complete(write) fail

When I got my Tab 7 Plus, it cames with th 3.2 Firmware. After a while I upgraded it to 4.0.3 official leak. Now When I try to flash the official 4.1.2, I get the "Complete(Write) operation failed" error.
I tried going back to 4.0.3 but nada. Tried some other country firmwares. Nothing. Flashing a 3.2 did work. Then i tried to go from 3.2 to 4.1.2, and can't either
Help.
Cheers,
Paul

I dont think the JB was made for 6200L.
Could be why. now you may need a .pit file.

chrisrotolo said:
I dont think the JB was made for 6200L.
Could be why. now you may need a .pit file.
Click to expand...
Click to collapse
There is, nevertheless, where can I find a .pit file for this device? Atleast I wanna get back to ICS.
Paul

ahh yes here .. http://www.hotfile.com/dl/203645108/995f0ca/P6200LUBMD1_P6200LVNOMD1_VNO.zip.html
I know they release source for 6200L first.
Im know Ive seen that error a few times regarding samsung devices here on xda.

chrisrotolo said:
ahh yes here .. http://www.hotfile.com/dl/203645108/995f0ca/P6200LUBMD1_P6200LVNOMD1_VNO.zip.html
I know they release source for 6200L first.
Im know Ive seen that error a few times regarding samsung devices here on xda.
Click to expand...
Click to collapse
Is the .pit included in there?

VNO is for Chile. Go here - http://live.samsung-updates.com/index.php?device=GT-P6200L

I tried that. Still get the error. I need a .pit file for the 6200L....someone sent me a .pit file for the 6200.....can I use that one?
Sent from my GT-N7000 using xda app-developers app

So I got the Pit file for the 6200L....flashed it via odin, an passed no problem. I flashed it with the 3.2 Firmware....no problem.....I still cant upgrade to ICS or JB!!

WIERD
SO I Rooted and CWM the Stock 3.2 HC and I am able to Flash Custom ROM...Paranoid and CM10...but I want stock 4.1.2
Just sharing this info with you guys....after all this I decided AGAIN to flash a stock 4.1.2 and i get the Complete(write) fail error again.
I hope someone finds a solution...

WOW
WOW! MAJOR FIND!
I installed CM10 so I could atleast use my Tab. Upon taking a pic.....the Tab saved it into the EMMC directory! This must be what us causing the error!
Anyone?

Samsung Galaxy Tab 7.0 Plus P6200 Jelly Bean Upgrade Problem
For starters, I just registered and this is my first post on this forum.
Now to my problem. I am trying to update my Samsung Galaxy Tab P6200 from ICS 4.0.4 to Jelly Bean 4.1.2 (Official Version-Austria #P6200XXMC3) through Odin 3.07.
I am able to get to download mode but the installation process freezes specifically at "recovery.img" stage (screenshot below);
View attachment 1927752
and the frozen tablet screenshot;
View attachment 1927773
Any help or reference to another post that the problem was fixed would be of great help.
Thanks

reithim said:
For starters, I just registered and this is my first post on this forum.
Now to my problem. I am trying to update my Samsung Galaxy Tab P6200 from ICS 4.0.4 to Jelly Bean 4.1.2 (Official Version-Austria #P6200XXMC3) through Odin 3.07.
I am able to get to download mode but the installation process freezes specifically at "recovery.img" stage (screenshot below);
View attachment 1927752
and the frozen tablet screenshot;
View attachment 1927773
Any help or reference to another post that the problem was fixed would be of great help.
Thanks
Click to expand...
Click to collapse
Try using odin 1.85.. i havent used the latest one but the old one works fine for me..
Sent from my GT-P6200 using XDA Premium HD app

theejay0625 said:
Try using odin 1.85.. i havent used the latest one but the old one works fine for me..
Sent from my GT-P6200 using XDA Premium HD app
Click to expand...
Click to collapse
Thanks for the idea.
After posting the problem yesterday, I continued searching for a solution and fiddling with it.
I recalled that on the first update attempt, I had checked "repartition" and used a PIT file from an unspecified Samsung tablet. It then occurred to me that the PIT file could be the issue so I downloaded a new one specifically for P6200 from droiddevelopers.com (cannot post the link due to forum rules)
Did it work? YES, PROBLEM SOLVED! I am now running official Jelly Bean.
Moral of the story is NEVER check "repartition" unless you have the specific PIT file for your device. If you still prefer repartitioning with each update, please download the correct PIT file from the above link.