Hi everyone!
My notification light does not work,but when i charge battery it works.Though i am using JB 4.2 by jenkin but it started since i rooted.
I read factory reset works,but then i do wipe data & factory reset in recovery every time i flash a new rom.Or does it mean to reset it without going into recovery,from the settings?What is the difference?
Anyway does anyone know of a sure solution? Any help will be honestly appreciated.Thanks
The p500 doesnt have notification light.....
What??
sarus_b said:
The p500 doesnt have notification light.....
Click to expand...
Click to collapse
Are you sure?
kitu34 said:
Are you sure?
Click to expand...
Click to collapse
I am typing this post using p500 and i dont see notification light....
If you mean keypad light then thats different from notification light...
Related
Can anyone please tell me about this...?
What is the effect when we turn it on?
Bro it's digital zooming method which will not properly work.....
Just ignore it....
Sent from My Rooted Canvas 2 Using JMP Rom
Battery and Proximity issue
Hi everyone,
I have installed JMP v 8.0 custom ROM in my MMX A110.
The ROM is pretty good but i am facing mainly two issues.
1. Proximity Sensor Not working though previously it was working with stock ROM. I read about replacing boot.img file but not sure how to do that.
2. Battery stuck at 99%: When I charge the batter while te mobile is on it stuck at 99% as soon as I switch of the mobile it reaches 100% but again if I start my mobile then the indicator turns red and battery goes back to 99%. I tried using battery calibration aand also tried to clear battery stats from advance panel but all in vain. The proble still persist.
Kindly provide me the solutions for the same.
Thank you,
Nutankumar
ZSD Setting
asifsajjad786 said:
Can anyone please tell me about this...?
What is the effect when we turn it on?
Click to expand...
Click to collapse
ZSD has been provided for assistance, which generally stabilize the shot taken by the camera.
So, no one really knows what is ZSD option? I googled everything...
asifsajjad786 said:
Can anyone please tell me about this...?
What is the effect when we turn it on?
Click to expand...
Click to collapse
rkbs said:
Bro it's digital zooming method which will not properly work.....
Just ignore it....
Sent from My Rooted Canvas 2 Using JMP Rom
Click to expand...
Click to collapse
Nutankumar said:
Hi everyone,
I have installed JMP v 8.0 custom ROM in my MMX A110.
The ROM is pretty good but i am facing mainly two issues.
1. Proximity Sensor Not working though previously it was working with stock ROM. I read about replacing boot.img file but not sure how to do that.
2. Battery stuck at 99%: When I charge the batter while te mobile is on it stuck at 99% as soon as I switch of the mobile it reaches 100% but again if I start my mobile then the indicator turns red and battery goes back to 99%. I tried using battery calibration aand also tried to clear battery stats from advance panel but all in vain. The proble still persist.
Kindly provide me the solutions for the same.
Thank you,
Nutankumar
Click to expand...
Click to collapse
somdroid said:
ZSD has been provided for assistance, which generally stabilize the shot taken by the camera.
Click to expand...
Click to collapse
Gozya said:
So, no one really knows what is ZSD option? I googled everything...
Click to expand...
Click to collapse
ZSD means ZERO SHUTTER DELAY
hit thanks if i helped you!
Gozya said:
So, no one really knows what is ZSD option? I googled everything...
Click to expand...
Click to collapse
The settings menu has an option called ZSD, which is a type of image stabilisation feature, and it actually manages to work quite well. When turned on, slight movements are very well compensated by the software.
Anybody know how to change floating notification's setting in the newest carbon rom nightly release?
I want to put some application notification to a "blacklist"
I'm using internet speed meter and touchpal x. So everytime I type the IME notification always appear taking some space up on the screen
I know that the floating notification can be turned off but I want it to be turned on but without those notification from those apps I mentioned before. Is that possible?
Looking forward for your reply. thank you
dustinraditya said:
Anybody know how to change floating notification's setting in the newest carbon rom nightly release?
I want to put some application notification to a "blacklist"
I'm using internet speed meter and touchpal x. So everytime I type the IME notification always appear taking some space up on the screen
I know that the floating notification can be turned off but I want it to be turned on but without those notification from those apps I mentioned before. Is that possible?
Looking forward for your reply. thank you
Click to expand...
Click to collapse
Settings > Apps > Tap on desired app > Blacklist > Blacklist from Hover.
Lethargy said:
Settings > Apps > Tap on desired app > Blacklist > Blacklist from Hover.
Click to expand...
Click to collapse
Thank you!
Can we set a time out for the floating notification?
dustinraditya said:
Thank you!
Can we set a time out for the floating notification?
Click to expand...
Click to collapse
Unfortunately I don't think you can, at least not yet. The duration it appears on screen is affected by how much you're tapping on the screen and if something is in immersive or not.
Lethargy said:
Unfortunately I don't think you can, at least not yet. The duration it appears on screen is affected by how much you're tapping on the screen and if something is in immersive or not.
Click to expand...
Click to collapse
Oh okay I got it
Thank you for the reply
One more question is it just my device or every device experiencing antutu benchmark stopped working in this carbon Rom?
dustinraditya said:
Oh okay I got it
Thank you for the reply
One more question is it just my device or every device experiencing antutu benchmark stopped working in this carbon Rom?
Click to expand...
Click to collapse
Pretty sure its just you.
Lethargy said:
Pretty sure its just you.
Click to expand...
Click to collapse
Any idea what went wrong with my device?
I'm on carbon July 5th nightly with linaro kernel
dustinraditya said:
Any idea what went wrong with my device?
I'm on carbon July 5th nightly with linaro kernel
Click to expand...
Click to collapse
Uninstall it and reinstall. If the problem still persists go into recovery and try wiping caches. If it still doesn't work after that then I have no idea.
Lethargy said:
Uninstall it and reinstall. If the problem still persists go into recovery and try wiping caches. If it still doesn't work after that then I have no idea.
Click to expand...
Click to collapse
Still stopped working
Was it because I only wiped /system when I flashed carbon rom?
dustinraditya said:
Still stopped working
Was it because I only wiped /system when I flashed carbon rom?
Click to expand...
Click to collapse
Probably.
Lethargy said:
Probably.
Click to expand...
Click to collapse
I installed the X version of antutu and it works fine. Thank for your help
Hello guys i bought a OPO for 30 euros ghwith a damaged lcd i changed it but the problem is when i start it there just the backlight screen and 2-3 sec after the screen is completely black but i can use it i can see the light of the capacitive buttons.. What's the problem should i buy another lcd (i got refunded) or which piece should i change.
Thanks
ggh95 said:
Hello guys i bought a OPO for 30 euros ghwith a damaged lcd i changed it but the problem is when i start it there just the backlight screen and 2-3 sec after the screen is completely black but i can use it i can see the light of the capacitive buttons.. What's the problem should i buy another lcd (i got refunded) or which piece should i change.
Thanks
Click to expand...
Click to collapse
Obviously buy another..
ok i will tell you the results next week ^^
ggh95 said:
ok i will tell you the results next week ^^
Click to expand...
Click to collapse
Best of luck!
Mr.Ak said:
Best of luck!
Click to expand...
Click to collapse
Hey! so i bought a new screen when it is boot no problem but when its came in the homescreen i got screen like this
but disappear when i touch the screen So What's the problem
guys?
ggh95 said:
Hey! so i bought a new screen when it is boot no problem but when its came in the homescreen i got screen like this
but disappear when i touch the screen So What's the problem
guys?
Click to expand...
Click to collapse
Are you by any chance using KitKat/cm11s?
If yes,flash Cos13.1.x through fastboot to solve this issue.
https://www.google.co.in/amp/s/foru...l/guide-return-opo-to-100-stock-t2826541/amp/
There's also a temporary way to fix this issue on KitKat rom with generic display but it happens at every reboot again and again and it is if you're dying without KitKat.
Mr.Ak said:
Are you by any chance using KitKat/cm11s?
If yes,flash Cos13.1.x through fastboot to solve this issue.
https://www.google.co.in/amp/s/foru...l/guide-return-opo-to-100-stock-t2826541/amp/
There's also a temporary way to fix this issue on KitKat rom with generic display but it happens at every reboot again and again and it is if you're dying without KitKat.
Click to expand...
Click to collapse
Yes I'm on Kitkat so i need to flash COS13.1 ?
ggh95 said:
Yes I'm on Kitkat so i need to flash COS13.1 ?
Click to expand...
Click to collapse
Yes,that's what I just said.
Mr.Ak said:
Yes,that's what I just said.
Click to expand...
Click to collapse
Flashed it but now the problem I have a little problem it's the touch screen.. When I want to press A letter it press Z or when i want to press Q it press S i'm usine AZERTY keyboard
ggh95 said:
Flashed it but now the problem I have a little problem it's the touch screen.. When I want to press A letter it press Z or when i want to press Q it press S i'm usine AZERTY keyboard
Click to expand...
Click to collapse
Try calibrating your screen with some apps available in play store.
Mr.Ak said:
Try calibrating your screen with some apps available in play store.
Click to expand...
Click to collapse
Tried nothing changes...
But i saw in Youtube a fix I need to flash Boeffla kernel. but which version
ggh95 said:
Tried nothing changes...
But i saw in Youtube a fix I need to flash Boeffla kernel. but which version
Click to expand...
Click to collapse
The one which works with cos13.1.x.
boeffla-kernel-5.4-COS13.1-bacon-anykernel.recovery.zip
http://kernel.boeffla.de/bacon/boeffla-kernel-cms/cm13.1s_download/Stable/
Mr.Ak said:
The one which works with cos13.1.x.
boeffla-kernel-5.4-COS13.1-bacon-anykernel.recovery.zip
http://kernel.boeffla.de/bacon/boeffla-kernel-cms/cm13.1s_download/Stable/
Click to expand...
Click to collapse
Flashed it same problem.... i think i will send back the screen..
ggh95 said:
Flashed it same problem.... i think i will send back the screen..
Click to expand...
Click to collapse
Yes, get a replacement.
Hey guys i have purchased this mobile few days ago, on the first one or two days i got the edge lighting.
Now after the last security update im not able to see it , i have tried all the settings and tricks but not working at all .
please help me if u have any alternative idea
In personalization
vikram.mohal said:
In personalization
Click to expand...
Click to collapse
i have tried it no use
Abhignu said:
i have tried it no use
Click to expand...
Click to collapse
Reset your device. May be it can help.
vikram.mohal said:
Reset your device. May be it can help.
Click to expand...
Click to collapse
Do you want me to reset complete device or reset system settings only
Abhignu said:
Do you want me to reset complete device or reset system settings only
Click to expand...
Click to collapse
Yup
vikram.mohal said:
Yup
Click to expand...
Click to collapse
Thank you man it worked.
Actually my bad I turned off the animation scale in developer settings, that's the reason why it was not working.
Great to hear
Happened to me too, didn't work because I turned off animations or set animation scale to 0.
Hi,
Since I updated my OP 8T to Android 13, I have no vibration for any notification but it still working for calls.
I checked each settings and everything seems to be ok. I restarted the phone.. nothing changes...
I don't have any idea.
Someone can help me?
Thank you.
Anybody get an answer?
lolokro said:
Anybody get an answer?
Click to expand...
Click to collapse
Did you try to factory reset your phone?
Rootk1t said:
Did you try to factory reset your phone?
Click to expand...
Click to collapse
I really want to avoid this