Can anyone please tell me about this...?
What is the effect when we turn it on?
Bro it's digital zooming method which will not properly work.....
Just ignore it....
Sent from My Rooted Canvas 2 Using JMP Rom
Battery and Proximity issue
Hi everyone,
I have installed JMP v 8.0 custom ROM in my MMX A110.
The ROM is pretty good but i am facing mainly two issues.
1. Proximity Sensor Not working though previously it was working with stock ROM. I read about replacing boot.img file but not sure how to do that.
2. Battery stuck at 99%: When I charge the batter while te mobile is on it stuck at 99% as soon as I switch of the mobile it reaches 100% but again if I start my mobile then the indicator turns red and battery goes back to 99%. I tried using battery calibration aand also tried to clear battery stats from advance panel but all in vain. The proble still persist.
Kindly provide me the solutions for the same.
Thank you,
Nutankumar
ZSD Setting
asifsajjad786 said:
Can anyone please tell me about this...?
What is the effect when we turn it on?
Click to expand...
Click to collapse
ZSD has been provided for assistance, which generally stabilize the shot taken by the camera.
So, no one really knows what is ZSD option? I googled everything...
asifsajjad786 said:
Can anyone please tell me about this...?
What is the effect when we turn it on?
Click to expand...
Click to collapse
rkbs said:
Bro it's digital zooming method which will not properly work.....
Just ignore it....
Sent from My Rooted Canvas 2 Using JMP Rom
Click to expand...
Click to collapse
Nutankumar said:
Hi everyone,
I have installed JMP v 8.0 custom ROM in my MMX A110.
The ROM is pretty good but i am facing mainly two issues.
1. Proximity Sensor Not working though previously it was working with stock ROM. I read about replacing boot.img file but not sure how to do that.
2. Battery stuck at 99%: When I charge the batter while te mobile is on it stuck at 99% as soon as I switch of the mobile it reaches 100% but again if I start my mobile then the indicator turns red and battery goes back to 99%. I tried using battery calibration aand also tried to clear battery stats from advance panel but all in vain. The proble still persist.
Kindly provide me the solutions for the same.
Thank you,
Nutankumar
Click to expand...
Click to collapse
somdroid said:
ZSD has been provided for assistance, which generally stabilize the shot taken by the camera.
Click to expand...
Click to collapse
Gozya said:
So, no one really knows what is ZSD option? I googled everything...
Click to expand...
Click to collapse
ZSD means ZERO SHUTTER DELAY
hit thanks if i helped you!
Gozya said:
So, no one really knows what is ZSD option? I googled everything...
Click to expand...
Click to collapse
The settings menu has an option called ZSD, which is a type of image stabilisation feature, and it actually manages to work quite well. When turned on, slight movements are very well compensated by the software.
Related
Here is the rom for the ones who wants to install what they want on their phone:
A rom bundled with only Phone/Contacts/Messaging/Browser/Market/MyFiles .
Uses Samsung's apps, and TouchwizLauncher.
JPA:http://www.megaupload.com/?d=NI6LDHTG
JPF:http://www.megaupload.com/?d=8EWPQTOY
wow! it looks like ultra-quick! is stable?
It would be interesting to see if we could shrink the /system partition and give more storage to /data..
That way we could have smaller base roms and let people have more room for storage of apps, settings, etc..
Looks like a nice rom, will flash it tomorrow. Can you post what is removed from this rom?
Techie87 said:
Looks like a nice rom, will flash it tomorrow. Can you post what is removed from this rom?
Click to expand...
Click to collapse
Every thing removed except Camera, Internet, Market, My Files, Settings, Superuser, Task Manager, Phone, Contacts, Messaging.
I flashed it yesterday and it works great. Thanks Gsam101
madhuranand007 said:
Every thing removed except Camera, Internet, Market, My Files, Settings, Superuser, Task Manager, Phone, Contacts, Messaging.
I flashed it yesterday and it works great. Thanks Gsam101
Click to expand...
Click to collapse
I flashed it this morning and I have to say: so far everything looks good. Now I do got one question since this is pretty annoying: When I flash JPA or JPB , swyping becomes very slow. I don't got this issue with Eclair so I don't know what's causing this. I really mean: When I swype a word, it takes a few seconds before the word appears on the screen. Does anyone know what's causing this and if there is a fix available?
I am getting very poor battery back up afther flashing with XXJPA and XXJPB. its around 12 hours and my phone is down. while using JG6 was getting around 1 day to 1.5days. please help.
satyamsit said:
I am getting very poor battery back up afther flashing with XXJPA and XXJPB. its around 12 hours and my phone is down. while using JG6 was getting around 1 day to 1.5days. please help.
Click to expand...
Click to collapse
Lol, use JG6 then if it's better for you?
satyamsit said:
I am getting very poor battery back up afther flashing with XXJPA and XXJPB. its around 12 hours and my phone is down. while using JG6 was getting around 1 day to 1.5days. please help.
Click to expand...
Click to collapse
Depends on the usage, but never seen so low duration with galaxy3 8-/
satyamsit said:
I am getting very poor battery back up afther flashing with XXJPA and XXJPB. its around 12 hours and my phone is down. while using JG6 was getting around 1 day to 1.5days. please help.
Click to expand...
Click to collapse
Same here, to me eclair and JP9 firmware are the best in terms of battery life, JPA and JPB only last me max 12 hours with normal usage and 15 hours when there's school.
Sent from my GT-I5800 using XDA App
Clicking during calls
Just installed this and the "clicking" during calls continues.
Gsam101 said:
Here is the rom for the ones who wants to install what they want on their phone:
A rom bundled with only Phone/Contacts/Messaging/Browser/Market/MyFiles .
Uses Samsung's apps, and TouchwizLauncher.
http://www.megaupload.com/?d=NI6LDHTG
(Flash a JPB zImage after if you want a better kernel).
Click to expand...
Click to collapse
Hi GSAM,
Thanks for the ROM. If you dont mind, please answer the below questions:
1. IS ringtone vol not able to mute with vol keys bug present in this ROM?
2. Does this ROM has proximity sensor fix?
3. Last but not least, how can i flash single file, i means just zImage of jpb?
Thanks
Root
madhuranand007 said:
Every thing removed except Camera, Internet, Market, My Files, Settings, Superuser, Task Manager, Phone, Contacts, Messaging.
I flashed it yesterday and it works great. Thanks Gsam101
Click to expand...
Click to collapse
So this ROM is already rooted?
The Dark Lestat said:
So this ROM is already rooted?
Click to expand...
Click to collapse
Yes it is
Gsam101 said:
Yes it is
Click to expand...
Click to collapse
May I please ask how you pre-rooted it?
I'm creating a custom rom and I can't seem to figure it out.
The Dark Lestat said:
May I please ask how you pre-rooted it?
I'm creating a custom rom and I can't seem to figure it out.
Click to expand...
Click to collapse
Yeah I like to know this as well
Hey there! After Flashing this firmware. When i connect USB cable it doesn't give any options to use as USB device , as Tethering, Kies etc.
I'd like to know how i can make it connect to PC and browse the SD.
Cheers!
dimitex said:
I'd like to know how i can make it connect to PC and browse the SD.
Cheers!
Click to expand...
Click to collapse
Pull down notification bar. There should be an option to use SD card.
gaarapt said:
Just installed this and the "clicking" during calls continues.
Click to expand...
Click to collapse
Is your wifi enabled? I found I had the clicking when mine was.
precurse said:
Is your wifi enabled? I found I had the clicking when mine was.
Click to expand...
Click to collapse
I think it was enabled when i tested. Atm i have JPA/JPB hybrid installed and works fine. I'll give it a shot with the new JPF and if that problem continues i'll test that. Thx.
Hi peeps this is my first post here, i hope this has not been asked before. My Nexus 5 rotates the screen upside down when battery hits 30%, it automatically un checks the auto rotate in display settings. I have no idea why it does this. Can anyone help.
Best regards
Simon
techbananas said:
Hi peeps this is my first post here, i hope this has not been asked before. My Nexus 5 rotates the screen upside down when battery hits 30%, it automatically un checks the auto rotate in display settings. I have no idea why it does this. Can anyone help.
Best regards
Simon
Click to expand...
Click to collapse
What ROM are you using?
abaaaabbbb63 said:
What ROM are you using?
Click to expand...
Click to collapse
Stock android 4.4.2
techbananas said:
Stock android 4.4.2
Click to expand...
Click to collapse
Well, it's a ROM glitch for sure. There's not much you could do about it, except flashing the factory images:
http://forum.xda-developers.com/showthread.php?t=2513701
abaaaabbbb63 said:
Well, it's a ROM glitch for sure. There's not much you could do about it, except flashing the factory images:
http://forum.xda-developers.com/showthread.php?t=2513701
Click to expand...
Click to collapse
Even though my phone is not rooted?
techbananas said:
Even though my phone is not rooted?
Click to expand...
Click to collapse
That guide will work even if your phone is not rooted. Backup your app data with Helium Backup (https://play.google.com/store/apps/details?id=com.koushikdutta.backup) and your internal storage to your PC.
Thanks for your help
Hi Team ,
I bought a Moto G for my wife , it was new but since there are is no official Motorola support here so there was no warranty with it. However i checked the phone in a lot of detail and there were no issues whatsoever with it.
After sometime , Kit kat Update poped up on the phone. I updated the phone via OTA (normal process) . Now after that the on the white area of the screen , i can see different Red lines.When i turn off the phone for 30-40 mins and turn it back on the display is fine. But then again they appear. Is this a sofware based issue or hardware based ? ( i am inclining towards hardware )
I installed an app called as Screen Filter and the red lines / colors have been very minimal now.
Anyone else faced this issue ? would downgrading / a custom rom would solve this up ?
Anyone ?
Do they appear in screenshots?
Sent from my XT1033 using Tapatalk
vlt96 said:
Do they appear in screenshots?
Sent from my XT1033 using Tapatalk
Click to expand...
Click to collapse
Nop. This is leading me to believe that this is a hardware level issue. Should i give a shot at reverting back over to 4.4.2 or its a waste of time ?
Lowresolution said:
Nop. This is leading me to believe that this is a hardware level issue. Should i give a shot at reverting back over to 4.4.2 or its a waste of time ?
Click to expand...
Click to collapse
Reverting to 4.4.2 at the moment is not good, you can't actually fully revert, wait for the 4.4.4 factory images. Did you a try a factory reset?
Sent from my XT1033 using Tapatalk
vlt96 said:
Reverting to 4.4.2 at the moment is not good, you can't actually fully revert, wait for the 4.4.4 factory images. Did you a try a factory reset?
Sent from my XT1033 using Tapatalk
Click to expand...
Click to collapse
Yes , a couple of times but to no avail. Here is the situation as of now , which is quite bad i know . I use an app know as screen filter from the playstore which reduces the brightness / colors and atleast makes the phone a bit use able , but its still v bad .
Please check these images up , they are off boot screen. It was all fine before the updates to 4.4.2
Lowresolution said:
Yes , a couple of times but to no avail. Here is the situation as of now , which is quite bad i know . I use an app know as screen filter from the playstore which reduces the brightness / colors and atleast makes the phone a bit use able , but its still v bad .
Please check these images up , they are off boot screen. It was all fine before the updates to 4.4.2
Click to expand...
Click to collapse
It seems to me a hardware related issue. Please contact the service center. They will either repair or change the display screen.
Hello all,
I have been using Ascend Mate 7 for 7 months now and it has been working fine till a couple of days ago when I noticed all of a sudden that the rear camera focus is not working and all the photos taken were blurry. Has any one experienced a similar issue or can you suggest any solution???
Thanks a lot
Any help ??????????????
Have you changed the funtions of the volume buttons in the camera settings?
I changed mine to change focus, have you done the same?
nikgare said:
Have you changed the funtions of the volume buttons in the camera settings?
I changed mine to change focus, have you done the same?
Click to expand...
Click to collapse
No I haven't
any thoughts ????????
net_pharoh said:
any thoughts ????????
Click to expand...
Click to collapse
up
Reset to default and try again.
If symptoms persist warranty / rma.
Good luck.
Thanks a lot for your answer, but the problem is that now I am outside my country and of course the warranty is not valid there , I just want to know if any body has encountered such a problem before?? It is really bugging me
net_pharoh said:
Hello all,
I have been using Ascend Mate 7 for 7 months now and it has been working fine till a couple of days ago when I noticed all of a sudden that the rear camera focus is not working and all the photos taken were blurry. Has any one experienced a similar issue or can you suggest any solution???
Thanks a lot
Click to expand...
Click to collapse
I have same problem but with front camera not focusing..
XDADEVX said:
I have same problem but with front camera not focusing..
Click to expand...
Click to collapse
Have you tried anything to fix it ?
net_pharoh said:
Have you tried anything to fix it ?
Click to expand...
Click to collapse
maybe front camera never focused at all
i just reflashed phone clean 3 button way .. and there is no auto focus on front camera .. but rear is fine.. all works..
XDADEVX said:
maybe front camera never focused at all
i just reflashed phone clean 3 button way .. and there is no auto focus on front camera .. but rear is fine.. all works..
Click to expand...
Click to collapse
Good luck solving that problem, I haven't tried resetting my phone yet as I am afraid from losing data. I was waiting for the lollipop update hoping that it could solve the problem but apparently it is gonna take a long time till it arrives
net_pharoh said:
Good luck solving that problem, I haven't tried resetting my phone yet as I am afraid from losing data. I was waiting for the lollipop update hoping that it could solve the problem but apparently it is gonna take a long time till it arrives
Click to expand...
Click to collapse
just backup data on sd card u won't loose them..
XDADEVX said:
just backup data on sd card u won't loose them..
Click to expand...
Click to collapse
will try to do it, thanks
I have done the factory reset and the problem still persists, any idea ?
net_pharoh said:
I have done the factory reset and the problem still persists, any idea ?
Click to expand...
Click to collapse
warranty
Apparently I have no other option, thank you
net_pharoh said:
Apparently I have no other option, thank you
Click to expand...
Click to collapse
I purchased faulty P8 thinking I will fix softeare but no imei and recovery and boot rom was damaged so I sent P8 to huawei and they replaced motherboard all works now ..
Note 5 v3 for xolo q3000.......
Update link today......
iammrugesh said:
Note 5 v3 for xolo q3000.......
Update link today......
Click to expand...
Click to collapse
Screenshots?
iammrugesh said:
Note 5 v3 for xolo q3000.......
Update link today......
Click to expand...
Click to collapse
Rom:https://drive.google.com/file/d/0B1VlhmzBW9opZ0V0MUhxQ2RrMXc/view?usp=docslist_api
Update fix: https://drive.google.com/file/d/0B1VlhmzBW9opVFcyZzFVUnI2Yms/view?usp=docslist_api
Camera patch: https://drive.google.com/file/d/0B1VlhmzBW9opRW5lS0x5amJFb3M/view?usp=docslist_api
Sujay95 said:
Screenshots?
Click to expand...
Click to collapse
When I am flash this ROM when I am ss click and post.
Screenshot: https://drive.google.com/folderview?id=0B1VlhmzBW9opSFhmOERDYTRWV1U
Samsung N5
Download and installed but there is error flashes "Samsung IME not working"
manishdhlk18m said:
Download and installed but there is error flashes "Samsung IME not working"
Click to expand...
Click to collapse
Use other keyboard....
Does Muliwindow works??
Camera exist is kk camera or samsung camera?
Air gestures working?
[email protected] said:
Does Muliwindow works??
Camera exist is kk camera or samsung camera?
Air gestures working?
Click to expand...
Click to collapse
I am not know about this ...I am only port it...not use it....so you are try and watch
Are all features really part of this ROM?
Any one flashed this rom? Does all functions work as Power Saving, Multi window, Air gesture? @manishdhlk18m Can you please confirm as it seems that you had/have this Rom installed on your Q3000.
Thanks!
Ya i install it and its working best, good ROM.
DOes power saving Mode, with monochrome display works?
Sent from my Q3000 using XDA Free mobile app
indigo110 said:
Any one flashed this rom? Does all functions work as Power Saving, Multi window, Air gesture? @manishdhlk18m Can you please confirm as it seems that you had/have this Rom installed on your Q3000.
Thanks!
Click to expand...
Click to collapse
Hi indigo,
I had flashed this ROM and used it for 2 days.
Dialer shows weird half screen only.
Not all gesture works, few of them worked pretty good.
Multi window doesn't work.
Power saving is not that much great. Restarting device drops around 13% battery. :cyclops:
Camera is 1.2 MP even after flashing patch it turns to be 5.4 MP. :crying:
And most important, the person who ported this ROM doesn't even care.
Copying from turkdevs and porting for device without giving credit.
Great going.
Hi Vipul
Thanks for the feedback, I really appreciate your response, now I am confused which Rom to try next..
Sent from my Q3000 using XDA Free mobile app
vipulkarkar said:
Hi indigo,
I had flashed this ROM and used it for 2 days.
Dialer shows weird half screen only.
Not all gesture works, few of them worked pretty good.
Multi window doesn't work.
Power saving is not that much great. Restarting device drops around 13% battery. :cyclops:
Camera is 1.2 MP even after flashing patch it turns to be 5.4 MP. :crying:
And most important, the person who ported this ROM doesn't even care.
Copying from turkdevs and porting for device without giving credit.
Great going.
Click to expand...
Click to collapse
Camera is 13 MP
iammrugesh said:
Camera is 13 MP
Click to expand...
Click to collapse
Ok, I will try this ROM on coming long weekend! @iammrugesh if you want help in optimizing the rom let us know on the forum, we will help you out with feedback's!!
iammrugesh said:
Camera is 13 MP
Click to expand...
Click to collapse
Porting any new roms?
The best according to me so far is the mere rom. Bugless, good performance and battery backup
Sujay95 said:
Porting any new roms?
The best according to me so far is the mere rom. Bugless, good performance and battery backup
Click to expand...
Click to collapse
@Sujay95 On screenshots of Mere rom it shows RAM as 1 GB, is this error or actually screenshot of different device?
How much battery backup you get on average in mere rom with screen on time? I am on legend v13 and i get around 27-28 hours with wifi always on and smart radio on (3G when screen on, 2g when screen off) for around 8 hrs. I get SOT of 4-5 Hrs. I use Greenify.
Thanks!
indigo110 said:
@Sujay95 On screenshots of Mere rom it shows RAM as 1 GB, is this error or actually screenshot of different device?
How much battery backup you get on average in mere rom with screen on time? I am on legend v13 and i get around 27-28 hours with wifi always on and smart radio on (3G when screen on, 2g when screen off) for around 8 hrs. I get SOT of 4-5 Hrs. I use Greenify.
Thanks!
Click to expand...
Click to collapse
Sot is around 6-7 hrs