4.3 flashing problems - HTC One S

Im on cm 10.2 and I can't make a backup from twrp 2.6.3.0. Also what is the selinux version and is needed on 4.3 and 4.4.2? I cant also flash dark jelly 4.3 latest version (cm 10.2 based) on twrp or on cwm. If someone knows... :good:
Hboot 2.15
Edit: I can flash dark jelly but after it boots and after doing the first settings I then reboot it and it ends up bootlooping for ever...

Please someone!

Related

Unable to flash recent roms

I'm not being able to flash recent roms. I keep getting error status 7. For JB 4.2 and later, I can't flash them. I can flash rom 4.1.2 and earlier.
I'm on 3.18 firmware (latest i think). unlocked and rooted. BUT I have S-ON, is that the problem? If I S-Off. will I be able to flash recent roms? I want kitkat on my phone Sorry im noob
What recovery version are you using?
Sent from my Evita
2.5.0.0 i think, ye. that's it. but I tried with both CWM and TWRP, non work. I suppose S-off is the problem right?
Your recovery is the problem. If you want to flash KitKat ROMs you need the modified TWRP 2.6.3.0 by jrior001, you'll find that in our Original Android Development section. Any other ROM you want the official TWRP 2.6 which you'll find here:
http://goo.im/devs/OpenRecovery/evita
Sent from my Evita

Unable to install Cyanogenmod 11

I am perplexed:
I had previously installed many custom roms after updating to stock kitkat, including CM 11. However, I am not able instally cyanogenmod, AT ALL. I have gone through all the steps and all the recoveries, CWM & TWRP all versions. After the installation, the phone hangs on the boot logo, always.
Any clue would be appreciated. Thank you.
U sure u flashed/fastbooted the recommended kernel correctly and did a full wipe before installing the Rom?
Sent from my MT25i
I highly doubt you installed CM11 with the KitKat kernel installed. It won't work. The only way it would work is to FXZ back to JB and then install the previous version of CWM or TWRP.
Currently, there are no ROMs working with the KitKat versions of CM11 or TWRP, although dhacker is working on a new CM11 using the latest KK kernel for the RAZR HD phones and the developer for the Nexesque ROM is also working on an updated version that uses the KitKat kernel as well.
iBolski said:
I highly doubt you installed CM11 with the KitKat kernel installed. It won't work. The only way it would work is to FXZ back to JB and then install the previous version of CWM or TWRP.
Currently, there are no ROMs working with the KitKat versions of CM11 or TWRP, although dhacker is working on a new CM11 using the latest KK kernel for the RAZR HD phones and the developer for the Nexesque ROM is also working on an updated version that uses the KitKat kernel as well.
Click to expand...
Click to collapse
It was very strange situation. I ended up getting CM to work by using CWM 6.0.4.4. FMI (for my information), I need to use CWM 6.0.4.4 will be needed to install custom roms.
Thanks for the advice..

Flashing EOS ROM, Stuck on boot!

UPDATE: I installed v6.0.3.1 of CWM, but that did not help. Then I installed version 4.1.1 of this ROM, and that worked. Only the OS is an older version than the stock that was on before. Can anyone tell me why v4.2.2 of EOS ROM is not compatible with my MZ604 Wingray Xoom, using v6.0.3.1 CWM recovery?
Try to install my first ROM on the Xoom (wifi model). Twice now I have tried to flash EOS (nightly build 20130705-205), both with and without the GAPPS package. It gets stuck on the logo screen. This is a 4.2.2 ROM and I have CWM v3.2.0.0. Could it be my CWM is not compatible with jb 4.2.2? I know plenty have used this ROM, so not sure why it's not working here.

[Q] Need help going from 4.1.1 to KatKiss

I currently am running CleanROM 3.0.3 Inheritance, android 4.1.1 bootloader 10.4.2.18-20121122 and twrp 2.3.1.0. I would like to be running KatKiss Lillipop.
As far as I can tell, if I can update my bootloader to the 4.2 version I should be able to flash the latest twrp and then KatKiss, but I need help to update my bootloader.
SpoonThief said:
I currently am running CleanROM 3.0.3 Inheritance, android 4.1.1 bootloader 10.4.2.18-20121122 and twrp 2.3.1.0. I would like to be running KatKiss Lillipop.
As far as I can tell, if I can update my bootloader to the 4.2 version I should be able to flash the latest twrp and then KatKiss, but I need help to update my bootloader.
Click to expand...
Click to collapse
Use fastboot to install the new Stock ROM by flashing the system blob. Then reboot and install the 2.8 TWRP, then the KatKiss ROM.
Solved
cmendonc2 said:
Use fastboot to install the new Stock ROM by flashing the system blob. Then reboot and install the 2.8 TWRP, then the KatKiss ROM.
Click to expand...
Click to collapse
Thanks! Worked out great. In case anyone else has a similar problem, I followed this guide by pjc21, flashed the 10.6.1.27 blob directly from 10.4.2.18, and then flashed the latest TWRP and then KatKiss. Worked out great!

Lollipop ROMs will not boot up

So i've been running stable slimkat 9.0 (4.4.4) on my galaxy s3 and it has been working great. I want to upgrade it to lollipop but I've had trouble flashing any lollipop rom. CM12, AICP, OctOS, PacROM all fail to boot after I flash in recovery. The boot animation starts, and I get the screen that android apps are initializing. After it runs through the apps, the screen blacks out and the phone resets and the cycle continues.
I've had no issues flashing roms beforehand. I can go back to 4.4. and 4.3 ROMs both AOSP and Touchwiz without any problems. I've flashed with both clockwork mod and TWRP and the results are the same. I do a clean factory reset and wipe prior to flashing the rom and 5.1 gapps.
I have no idea why it won't boot up for me. Would appreciate any help!
alphax_0 said:
So i've been running stable slimkat 9.0 (4.4.4) on my galaxy s3 and it has been working great. I want to upgrade it to lollipop but I've had trouble flashing any lollipop rom. CM12, AICP, OctOS, PacROM all fail to boot after I flash in recovery. The boot animation starts, and I get the screen that android apps are initializing. After it runs through the apps, the screen blacks out and the phone resets and the cycle continues.
I've had no issues flashing roms beforehand. I can go back to 4.4. and 4.3 ROMs both AOSP and Touchwiz without any problems. I've flashed with both clockwork mod and TWRP and the results are the same. I do a clean factory reset and wipe prior to flashing the rom and 5.1 gapps.
I have no idea why it won't boot up for me. Would appreciate any help!
Click to expand...
Click to collapse
same problem here bro
sgs3 i9300
i solved mine so if you are still experiencing that hmu i will show you what i did
alphax_0 said:
So i've been running stable slimkat 9.0 (4.4.4) on my galaxy s3 and it has been working great. I want to upgrade it to lollipop but I've had trouble flashing any lollipop rom. CM12, AICP, OctOS, PacROM all fail to boot after I flash in recovery. The boot animation starts, and I get the screen that android apps are initializing. After it runs through the apps, the screen blacks out and the phone resets and the cycle continues.
I've had no issues flashing roms beforehand. I can go back to 4.4. and 4.3 ROMs both AOSP and Touchwiz without any problems. I've flashed with both clockwork mod and TWRP and the results are the same. I do a clean factory reset and wipe prior to flashing the rom and 5.1 gapps.
I have no idea why it won't boot up for me. Would appreciate any help!
Click to expand...
Click to collapse
Are you on the correct firmware? MF1? There is a flashable zip in the CM12.1 thread for it.
Updating the firmware did the trick, thanks! Was running on ML1 up til now. Glad my s3 can still keep up with the times

Categories

Resources