Q1000s , CWM Recovery Ported through MKDROID Tools (RUA1)
thanks for cwm
but 1 question out of this topic
do u know how can we add otg support to our device ???
sanjay.ghanchi said:
thanks for cwm
but 1 question out of this topic
do u know how can we add otg support to our device ???
Click to expand...
Click to collapse
unfortunately no
Actually I also looking for that
OTG CHECKER FROM PLAY STORE
Says your device Supports OTG
rbdudani said:
OTG CHECKER FROM PLAY STORE
Says your device Supports OTG
Click to expand...
Click to collapse
already checked it says that device supports otg but when I connect nothing happens even tried all apps that mounts USB otg but no luck I guess It requires kernel changes
sanjay.ghanchi said:
already checked it says that device supports otg but when I connect nothing happens even tried all apps that mounts USB otg but no luck I guess It requires kernel changes
Click to expand...
Click to collapse
Does Q1000s has front LED ? (I bought it second and not seeing any notification LED when Charging mobile)
rbdudani said:
Does Q1000s has front LED ? (I bought it second and not seeing any notification LED when Charging mobile)
Click to expand...
Click to collapse
no it doesn't had LED
sanjay.ghanchi said:
no it doesn't had LED
Click to expand...
Click to collapse
thanks man. I was worrying that LED is not working in my mobile
rbdudani said:
Q1000s , CWM Recovery Ported through MKDROID Tools (RUA1)
Click to expand...
Click to collapse
Hi "rb"...
I got MTKDROID v2.5.2, Can you please help letting me know how to use this on my XOLO Q1000s? A couple of pointers would do I guess.
I apologize for sounding stupid to you, but I am Novice kinds... Hoping a reply - probably a fast one - from you. Thanks a ton!
[email protected] said:
Hi "rb"...
I got MTKDROID v2.5.2, Can you please help letting me know how to use this on my XOLO Q1000s? A couple of pointers would do I guess.
I apologize for sounding stupid to you, but I am Novice kirecovery Hoping a reply - probably a fast one - from you. Thanks a ton!
Click to expand...
Click to collapse
As it is already ported you will not need mktdroid tools
If you want to install CWM on your q1000s then please follow below steps
1. Install framaroot
2. Root your mobile with framaroot
3. Install mobile uncle and install above recovery.img with the help of mobile uncle
Thanks for ur reply...I have rooted it already, so shall I proceed point 3 onwards!?!
All I hope is it helps on Q1000s, as many have created kind of ambiguity while ignoring 's' in model name
Sent from my Xolo Q800 on Slim ME! v2 (4.2.2) Vanilla
[email protected] said:
Thanks for ur reply...I have rooted it already, so shall I proceed point 3 onwards!?!
All I hope is it helps on Q1000s, as many have created kind of ambiguity while ignoring 's' in model name
Sent from my Xolo Q800 on Slim ME! v2 (4.2.2) Vanilla
Click to expand...
Click to collapse
Please go ahead with step 3
I myself using Q1000s with CWM
[email protected] said:
Thanks for ur reply...I have rooted it already, so shall I proceed point 3 onwards!?!
All I hope is it helps on Q1000s, as many have created kind of ambiguity while ignoring 's' in model name
Sent from my Xolo Q800 on Slim ME! v2 (4.2.2) Vanilla
Click to expand...
Click to collapse
Great.. Thanks.. I'll reach home, do it and share my inputs with you.
Thanks a lot..
Sent from my Xolo Q800 on Slim ME! v2 (4.2.2) Vanilla
---------- Post added at 06:04 PM ---------- Previous post was at 05:46 PM ----------
[email protected] said:
Thanks for ur reply...I have rooted it already, so shall I proceed point 3 onwards!?!
All I hope is it helps on Q1000s, as many have created kind of ambiguity while ignoring 's' in model name
Sent from my Xolo Q800 on Slim ME! v2 (4.2.2) Vanilla
Click to expand...
Click to collapse
Im sorry to trouble you but I installed 'Mobile uncle Tools'
From Play. None of the options is allowing to select a file
Got another Mobile uncle online and that is seeking recovery image on SDCard (?!?) ...
Is it that I need to create an SDCard in it? But how.. :-/
I am missing some knowledge here...
Please Help!! or Any work around?
rbdudani said:
Please go ahead with step 3
I myself using Q1000s with CWM
Click to expand...
Click to collapse
Sent from my Xolo Q800 on Slim ME! v2 (4.2.2) Vanilla
rbdudani said:
Please go ahead with step 3
I myself using Q1000s with CWM
Click to expand...
Click to collapse
Im sorry to trouble you but I installed 'Mobile uncle Tools'
From Play. None of the options is allowing to select a file
Got another Mobile uncle online and that is seeking recovery image on SDCard (?!?) ...
Is it that I need to create an SDCard in it? But how.. :-/
I am missing some knowledge here...
Please Help!! or Any work around?
Sent from my Nexus 4 using Tapatalk
[email protected] said:
Im sorry to trouble you but I installed 'Mobile uncle Tools'
From Play. None of the options is allowing to select a file
Got another Mobile uncle online and that is seeking recovery image on SDCard (?!?) ...
Is it that I need to create an SDCard in it? But how.. :-/
I am missing some knowledge here...
Please Help!! or Any work around?
Sent from my Nexus 4 using Tapatalk
Click to expand...
Click to collapse
Please search xda for how to use mobile uncle
There are many post with step by step procedure
rbdudani said:
Please search xda for how to use mobile uncle
There are many post with step by step procedure
Click to expand...
Click to collapse
Thanks, did this and it seemed it worked too. It taken me too CWM recovery as well when I clicked the prompt of 'reboot in recovery?'
But it never took me again there (but stock recovery) with Up Arrow + Power button combination. If I select boot in recovery in the MU menu, it takes to stock recovery.
Do we need to use MU every time, push img and then choose prompt to goto CWM?
Please help.
Sent from my Nexus 4 using Tapatalk
[email protected] said:
Thanks, did this and it seemed it worked too. It taken me too CWM recovery as well when I clicked the prompt of 'reboot in recovery?'
But it never took me again there (but stock recovery) with Up Arrow + Power button combination. If I select boot in recovery in the MU menu, it takes to stock recovery.
Do we need to use MU every time, push img and then choose prompt to goto CWM?
Please help.
Sent from my Nexus 4 using Tapatalk
Click to expand...
Click to collapse
Thats inbuit Stock recovery restore script which is restoring Stock Recovery on reboot.
rename recovery-from-boot.p file to anyother name
Related
This is how to root your Samsung Galaxy R running on ICS version 4.0.4
Step 1
Go over to http://androidsu.com/superuser/ and scroll down to ARM devices (2.0 – 4.1). Then you will see 3.2-RC2 under it is a link to the download, click it to start the download.
Step 2
Ounce you have downloaded it you want to put it onto the root of your SD card. You can do this by putting it onto your external SD card and copying it over to the root of your phone.
Step 3
Boot into CWMR. You can do this by shutting your phone down completely and ounce its shut off you hold down power and the volume Up button.
Step 4
After you boot into CWMR you want to install zip from SD card so hit the volume keys to move up and down and click install zip from SD card. Then you scroll down to where the Superuser zip file is and flash it.
Step 5
Finally, once you have flashed it you want to reboot your phone by going back to main menu and clicking reboot. Now your done!! Just wait for your phone to boot up and you have successfully rooted your phone!
How this is different from root recovery v4 posted earlier. Any difference between these two rooting methods ,please mention.
I rooted my mobile using this method... May be same but different file....
Sent from my GT-I9103 using xda app-developers app
nvo2411 said:
How this is different from root recovery v4 posted earlier. Any difference between these two rooting methods ,please mention.
Click to expand...
Click to collapse
I don't know dude but it took only less time (5 mins max )to root my phone. I have also updated to latest superuser in playstore.
Sent from my GT-I9103
Thanks.. This is helpful.
Sent from my GT-I9103 using Tapatalk 2
hdn413 said:
Thanks.. This is helpful.
Click to expand...
Click to collapse
Happy to help you buddy .....
Vikram Brother How to take the Screenshot now? Usual method doesn't work anymore on ICS
maheepmaurya said:
Vikram Brother How to take the Screenshot now? Usual method doesn't work anymore on ICS
Click to expand...
Click to collapse
Press power button and home button at a time....
Just now tested it and working fine...
mj.vikram said:
Happy to help you buddy .....
Click to expand...
Click to collapse
just saw now..its like miracle buddy..ICS on our device...yuppppppppppppppppppppppppppiiiiiiii..Hey MJ can you do one thing. In this thread, please add / collect the link of downloads ( means that thread inwhich ICS link is) / discussion & everything related to ICS. So, that newbie can easily gets what he/she whats. Also, please mention how to install using CWM or ODIN with precautions. So that new thread shouldn't be made due to lots of enthusiasm.:good:
mj.vikram said:
Press power button and home button at a time....
Just now tested it and working fine...
Click to expand...
Click to collapse
Nah. not Working for me. Anyway we'll see to it.
kataria.vikesh said:
just saw now..its like miracle buddy..ICS on our device...yuppppppppppppppppppppppppppiiiiiiii..Hey MJ can you do one thing. In this thread, please add / collect the link of downloads ( means that thread inwhich ICS link is) / discussion & everything related to ICS. So, that newbie can easily gets what he/she whats. Also, please mention how to install using CWM or ODIN with precautions. So that new thread shouldn't be made due to lots of enthusiasm.:good:
Click to expand...
Click to collapse
ok i will do it...
maheepmaurya said:
Nah. not Working for me. Anyway we'll see to it.
Click to expand...
Click to collapse
Hold both the buttons for at least couple of seconds. It works for me
Hi Vikram,
Thanks for your post..
Just a small correction in Step#4.
In order to go to CWMR, we need to press power.. and then press volume_Up and Home button simultaneously... and not Volume_Down..
I was following your instructions to the T.. and was not at all getting into CWMR mode.. as i thought for a second.. the hot keys combinations have changed..
chandanbs said:
Hi Vikram,
Thanks for your post..
Just a small correction in Step#4.
In order to go to CWMR, we need to press power.. and then press volume_Up and Home button simultaneously... and not Volume_Down..
I was following your instructions to the T.. and was not at all getting into CWMR mode.. as i thought for a second.. the hot keys combinations have changed..
Click to expand...
Click to collapse
Thank you buddy, corrected it.....
mj.vikram said:
Thank you buddy, corrected it.....
Click to expand...
Click to collapse
hey MJ do you have any other link for download for this ICS ROM..??
kataria.vikesh said:
hey MJ do you have any other link for download for this ICS ROM..??
Click to expand...
Click to collapse
No, i've downloaded form Galaxy R Box.....
If I want to root, do I need to backup first?
Sent from my GT-I9103 using xda app-developers app
AgoniAdemi said:
If I want to root, do I need to backup first?
Click to expand...
Click to collapse
Better to take backup, its not mandatory........
mj.vikram said:
Better to take backup, its not mandatory........
Click to expand...
Click to collapse
give me the link buddy, please:fingers-crossed:
kataria.vikesh said:
give me the link buddy, please:fingers-crossed:
Click to expand...
Click to collapse
Try from below at least one should work, i am in office so i am not able to open it....
1. http://www.filefactory.com/file/1u6pksi5e103/n/2012-08-16.20.07.20.rar
2. http://narod.ru/disk/59523749001.8e152b7603da92b268a2612a2e8f1a65/2012-08-16.20.07.20.rar.html
3. http://www.mirrorcreator.com/files/BCOKNCLK/2012-08-16.20.07.20.rar_links
pls anyone guide me how to root Samsung galaxy young s6312.i m new to this forum so pls forgive me if i have post this in wrong section
raj2k8 said:
pls anyone guide me how to root Samsung galaxy young s6312.i m new to this forum so pls forgive me if i have post this in wrong section
Click to expand...
Click to collapse
Please anyone.
ratanparai said:
Please anyone.
Click to expand...
Click to collapse
not yet buddy..we need to wait....
Downlaod this zip file from here
Now copy the zip file to the sd card.
Switch off the phone and reboot into recovery (By pressing power button + home button + volume up together).
Use volume button to scroll up and down through menus and home button to select.
Select apply update from sd card and select the copied zip file,
After the update is don reboot your device. Your device will be rooted and you will have super user app installed.
Hope this helped you.
update
i am trying something from its stock recovery ie version <3e>
* i put some zips on ext memory card & internal memory too.
*<3e> recovery doesn't detect it all i m getting an error E:unknown volume for path [/sdcard] so cant do anything with that.
* i m confused between sdcard, sdcard0 & extSdCard. recovery doesn't show up anything of these. is it a virtual memory card thingy & fake recovery?
anyone suggest?
---------- Post added at 04:52 PM ---------- Previous post was at 04:49 PM ----------
shashivydyula said:
Downlaod this zip file from here
Now copy the zip file to the sd card.
Switch off the phone and reboot into recovery (By pressing power button + home button + volume up together).
Use volume button to scroll up and down through menus and home button to select.
Select apply update from sd card and select the copied zip file,
After the update is don reboot your device. Your device will be rooted and you will have super user app installed.
Hope this helped you.
Click to expand...
Click to collapse
i appreciate ur help bro but i was doing the same & i m getting an error E:unknown volume for path [/sdcard] so cant apply update from sd card.
signature verification failed
tried installing with adb
raj2k8 said:
signature verification failed
tried installing with adb
Click to expand...
Click to collapse
memory card detecting in recovery?
how to push it via adb?
Try to install clockwork mod recovery and apply the update from sd card.
This may fix the problem.
no luck yet:crying:
devdx said:
no luck yet:crying:
Click to expand...
Click to collapse
Try with super one click. If this does not help you, then wait to hear from developers.
To use super one click you need your mobile USB drivers for PC. Download them and try rooting with super one click.
shashivydyula said:
Try with super one click. If this does not help you, then wait to hear from developers.
To use super one click you need your mobile USB drivers for PC. Download them and try rooting with super one click.
Click to expand...
Click to collapse
none of method is working... lets see wt happs...
pls anyone help...i hv tried.all methods but not working
any update on this??
devdx said:
any update on this??
Click to expand...
Click to collapse
search for "framaroot.apk" its working...i hv rooted mine
raj2k8 said:
search for "framaroot.apk" its working...i hv rooted mine
Click to expand...
Click to collapse
Bro u rooted new Galaxy young 6312? Which custom rom u using? does 2.3.5 or any rom lower than ICS available for this set?
Its not too fluent on jellybeans but running it so it will run GB without any issues.. As soon as GB ROM comes for this model i gona screem and buy it
Sent from my ST25i using Tapatalk 2
gt-6312 became root
Hi
Thank you
* My phone(GT-S6312) became rooted with easily Framaroot.apk v1.4
rang6300 said:
Bro u rooted new Galaxy young 6312? Which custom rom u using? does 2.3.5 or any rom lower than ICS available for this set?
Its not too fluent on jellybeans but running it so it will run GB without any issues.. As soon as GB ROM comes for this model i gona screem and buy it
Sent from my ST25i using Tapatalk 2
Click to expand...
Click to collapse
There are no custom roms available yet. It comes with 4.1.2 officially. GB/ics roms wont be come for this device officially.
We need a developer for this device for that..
Sent from my GT-S6312 using xda premium
devdx said:
There are no custom roms available yet. It comes with 4.1.2 officially. GB/ics roms wont be come for this device officially.
We need a developer for this device for that..
Sent from my GT-S6312 using xda premium
Click to expand...
Click to collapse
I know custom roms is the only way to get GB, but can u make thread for samsung young s6312 plz..?
Sent from my ST25i using Tapatalk 2
rang6300 said:
I know custom roms is the only way to get GB, but can u make thread for samsung young s6312 plz..?
Sent from my ST25i using Tapatalk 2
Click to expand...
Click to collapse
u mean a separate forum? I dont think that there will be separate forum cuz this device is not that popular at this stage. Lets see if any of the developer will show some interest in this device...
Also, we need to know about number of users for the device..
Sent from my GT-S6312 using xda premium
Framaroot
Hi Framaroot v1.4.1 worked for my GT-S6312 with Android v4.1.2 as well.
I picked the option 'Gandalf' during install and it rooted the device after a reboot. The only thing I had to do was change the language from German to English (Phone was shipped from Germany). The device is now rooted and I still have all my apps and data. Easiest root I've used so far.
hi fnds i've flashed Ultimate Galaxy V2 custom rom in my mmx a110. but the problem is it is showing one sim & when i make or receive calls it is ringing for 4-5 seconds & simply stopping & coming to normal position. & for the other sim it is showing like invalid imei, :crying::crying::crying:
so friends pls help for this problem.
thanks a lot in advance
Howz about this solution posted by addasjii?
addasjii said:
U can get ur imei no. Back...even I have faced the same Problem..just go into the engineering mode then in the connectivity column goto cds information and then to radio information and then phone 1--- type AT+EGMR=1,7,"" within the inverted comma put ur first imei no..and hit (send at command). And similarly in phone 2 type at+egmr=1,10"" and put your second imei no.and hit send at command ...then just reboot...it works...
U can find your imei no a the back where u put ur battery. With bar code the first is for phone 1 and below that for phone 2
Sent from my Micromax A110 (Canvas 2) using xda app-developers app
Click to expand...
Click to collapse
Sent from my A110 using xda premium
[email protected] said:
Howz about this solution posted by addasjii?
Sent from my A110 using xda premium
Click to expand...
Click to collapse
s u r correct bro. but the problem is as i'm in s4+note3 ui i'm not able to get into engineering mode by *#*#3646633#*#*.:crying::crying: so what can i do right now.
pls help me.
thank u in advance
Use gravity box to launch it
chaitu.swaroop said:
s u r correct bro. but the problem is as i'm in s4+note3 ui i'm not able to get into engineering mode by *#*#3646633#*#*.:crying::crying: so what can i do right now.
pls help me.
thank u in advance
Click to expand...
Click to collapse
I will make a patch tomorrow. Try launching engineering mod app after flashing that patch.
vish97 said:
Use gravity box to launch it
Click to expand...
Click to collapse
If the engineering mod does not appear after dialing the number,than you won't be able to launch it via gravity box either.
[email protected] said:
I will make a patch tomorrow. Try launching engineering mod app after flashing that patch.
If the engineering mod does not appear after dialing the number,than you won't be able to launch it via gravity box either.
Click to expand...
Click to collapse
Hi bro thanks a lot for taking this much care about my posts. I got my imei no back. I got the engineering node from mtk mobile uncle tools. Some bro like u had given this idea in some previous threads. He even told like use mtk tools or gravity box & i followed mtk tools.
Thanks a lot really for ur replies.
If i need more help in future surely i will ask u brother.
vish97 said:
Use gravity box to launch it
Click to expand...
Click to collapse
Hi bro thanks a lot for or reply.
I got my imei back. I have einntered into engineering mode by using mtk mobile uncle tools. Someone like u has given this idea in some previous threads.
:good::good:
vish97 said:
Use gravity box to launch it
Click to expand...
Click to collapse
Hi bro I don't know about gravity box.i don't know how to use it.I read something about it in net but I didn't get clearly & I don't know about how to use it.
[email protected] said:
I will make a patch tomorrow. Try launching engineering mod app after flashing that patch.
If the engineering mod does not appear after dialing the number,than you won't be able to launch it via gravity box either.
Click to expand...
Click to collapse
Plz try urself actually just the engineer code has been changed in JB custom roms .U cant launch the engineer mod in any custom roms with the number.it doesnt mean that u cant lauch it via 3rd party softwares
---------- Post added at 10:57 AM ---------- Previous post was at 10:54 AM ----------
chaitu.swaroop said:
Hi bro I don't know about gravity box.i don't know how to use it.I read something about it in net but I didn't get clearly & I don't know about how to use it.
Click to expand...
Click to collapse
Gravity Box is a module for Xposed framework wich allows u to customize ur fone"s UI ,CRT effect ,notification bar ,status bar ,hardware keys etc...
For more info"s go here http://forum.xda-developers.com/showthread.php?t=2316070
patch
here its is.......engineer mode patch.
download from here,go to clockwork recovery and chose install zip from sd card. locate and flash
Then try to go into engineer mode.
[email protected] said:
here its is.......engineer mode patch.
download from here,go to clockwork recovery and chose install zip from sd card. locate and flash
Then try to go into engineer mode.
Click to expand...
Click to collapse
Try http://4pda.ru/forum/index.php?showtopic=488896&view=findpost&p=27870806
igorbullz said:
Try http://4pda.ru/forum/index.php?showtopic=488896&view=findpost&p=27870806
Click to expand...
Click to collapse
Didn't my patch worked?
can I use http://androtab.info/clockworkmod/rockchip/rk3066/ (generic cwm) recovery with lava etab xtron plus, I have successfully rooted the phone now it is the turn of recovey, and does the nandroid online backup require custom recovery? I was thinking about making a backup before installing recovery, also if it fails is there a chance of bricking?
HTC.EXPLORER said:
can I use http://androtab.info/clockworkmod/rockchip/rk3066/ (generic cwm) recovery with lava etab xtron plus, I have successfully rooted the phone now it is the turn of recovey, and does the nandroid online backup require custom recovery? I was thinking about making a backup before installing recovery, also if it fails is there a chance of bricking?
Click to expand...
Click to collapse
Why are you choosing online backup . Install CWM and create a nandroid backup
Click thanks if I helped
Sent from my GT-S7562 using XDA Premium 4 mobile app
Please answer my question
AlfasPeralassery said:
Why are you choosing online backup . Install CWM and create a nandroid backup
Click thanks if I helped
Sent from my GT-S7562 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
hey, man, I'm not stupid even though I am relatively novice but I'm very much familiar with what does what and to what extent...I know that nandroid be cwm does a complete backup and is morereliable but the problem is I can't find the recovery image of my tab and I don't have the ba*ls to flash a generic rk3066 recovey, for now, I'm not doing a backup and not at all fiding with system files not even unnstalling bloatware just freezing them...:good:
HTC.EXPLORER said:
hey, man, I'm not stupid even though I am relatively novice but I'm very much familiar with what does what and to what extent...I know that nandroid be cwm does a complete backup and is morereliable but the problem is I can't find the recovery image of my tab and I don't have the ba*ls to flash a generic rk3066 recovey, for now, I'm not doing a backup and not at all fiding with system files not even unnstalling bloatware just freezing them...:good:
Click to expand...
Click to collapse
I am very happy to know you are very femilar with android . Please forgive me for my abovd post .
Thank you
cwm
is here any cwm for lava xtron plus tab
ukstillalive said:
is here any cwm for lava xtron plus tab
Click to expand...
Click to collapse
see my signature man!!.. you must thank me in that post also if it helps you
cwm
bro i m a newbie thats why i dont know much , i tried this genric cwm with rkflashtool but i got my tab bricked and went 2 service centre
ukstillalive said:
bro i m a newbie thats why i dont know much , i tried this genric cwm with rkflashtool but i got my tab bricked and went 2 service centre
Click to expand...
Click to collapse
So, you didn't follow my guide, win drivers are not really working here...you should've followed my guide
Thanx bro , going to install the cwm .
looking good ,
I have rooted before my tablet and installed the ROM which u r giving here but its simmiler to the stock ROM .
I want to request u that plz make supported cyanogenmod for lava xtron plus tab
Hey its working without any problem , cwm is installed now ,
Now I want to know that there is avlble of multiuser .
Is this working or not for lava xtron plus tab ,,, becoz its not downloading
Sent from my GT-I9300 using Tapatalk
ukstillalive said:
Hey its working without any problem , cwm is installed now ,
Now I want to know that there is avlble of multiuser .
Is this working or not for lava xtron plus tab ,,, becoz its not downloading
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
That is the software crappiness I was ta link about in my review, lava engineers used mobile based is not tablet based that is why cell radio drivers are included...multiuser does not work here, I haven't tried it but I read about it in a review which was absolutely bang on Bout everything else from cell radio benchmarks
Press thanks if I helped
Multiuser is working bro , I have tried it bro
Sent from my GT-I9300 using Tapatalk
help
bro any other rom devlopment is possible or not ?
ukstillalive said:
Multiuser is working bro , I have tried it bro
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
Alrighty but I don't really care for multi user...
ukstillalive said:
bro any other rom devlopment is possible or not ?
Click to expand...
Click to collapse
It is possible, I won't do it cause I am studying for IIT JEE right now :fingers-crossed:...Only ROM that I was able to find is in my guide..I will not really recommend to flash cygenmod or anything else as it can permanently brick!
How to uninstall multiuser now .... i m unable to
Sent from JB 7+ using tapatalk
ukstillalive said:
How to uninstall multiuser now .... i m unable to
Sent from JB 7+ using tapatalk
Click to expand...
Click to collapse
I don't know...do you have titanium backup, if you do then you can click on the app then select actions pane then uninstall...or link2 sd can also uninstall
from where did you install it.?? is it an app or somethin else..I am ot really familiar with the concept..
EDIT: Well, acc to this it can be enabled on a 4.2 device but we dont't really have that option in settings..it appears that I was right..http://thedroidlawyer.com/2013/12/how-to-enable-multiple-user-accounts-on-android-4-2-and-above/
from arctool application
Sent from JB 7+ using tapatalk
---------- Post added at 09:23 PM ---------- Previous post was at 08:39 PM ----------
HTC.EXPLORER said:
I don't know...do you have titanium backup, if you do then you can click on the app then select actions pane then uninstall...or link2 sd can also uninstall
from where did you install it.?? is it an app or somethin else..I am ot really familiar with the concept..
EDIT: Well, acc to this it can be enabled on a 4.2 device but we dont't really have that option in settings..it appears that I was right..http://thedroidlawyer.com/2013/12/how-to-enable-multiple-user-accounts-on-android-4-2-and-above/
Click to expand...
Click to collapse
ya i have titanium backup but i have installed multiuser through arctool application jisase cwm recovery install hota hai
ukstillalive said:
from arctool application
Sent from JB 7+ using tapatalk
---------- Post added at 09:23 PM ---------- Previous post was at 08:39 PM ----------
ya i have titanium backup but i have installed multiuser through arctool application jisase cwm recovery install hota hai
Click to expand...
Click to collapse
http://www.arctablet.com/blog/forum...ith-arctools-android-4-2-x-or-newer-required/
Here in the forum you can see that they have not given method to reverse it, if you had a wonderful backup the flash it or if you have got it working then you can simply delete other accounts... Best of get it working correctly you night have to delete provision. apk using root Explorer
Hi guys
im asking you why is this happening ?
the buttons are greyed out i created backup but when try to "prepare blocks for flashtool it says
--- Preparation of files for FlashTool is impossible, file isn't found : C:\Documents and Settings\Administrator\Desktop\MtkDroidTools v2.5.3\backups\i6_140930_backup_141030-115103\MT65??_Android_scatter*.txt
and the buttons are greyed out check that
and mtk droid tools not detecting full hardware
only MTK
i.imgur.com/9wJvslY.jpg
imgur.com/fx3knpA
i.imgur.com/GGQOD57.png
i.imgur.com/mItiGlq.png
i.imgur.com/AFtPO5l.png
i.imgur.com/nb744U3.png
as xda doesnt allow me to post picture you can go tho these links and see images
thanks
Gr4nDT3R0R said:
Hi guys
im asking you why is this happening ?
the buttons are greyed out i created backup but when try to "prepare blocks for flashtool it says
--- Preparation of files for FlashTool is impossible, file isn't found : C:\Documents and Settings\Administrator\Desktop\MtkDroidTools v2.5.3\backups\i6_140930_backup_141030-115103\MT65??_Android_scatter*.txt
and the buttons are greyed out check that
and mtk droid tools not detecting full hardware
only MTK
i.imgur.com/9wJvslY.jpg
imgur.com/fx3knpA
i.imgur.com/GGQOD57.png
i.imgur.com/mItiGlq.png
i.imgur.com/AFtPO5l.png
i.imgur.com/nb744U3.png
as xda doesnt allow me to post picture you can go tho these links and see images
thanks
Click to expand...
Click to collapse
I have the same phone JY-G5S+, have you root it first ?
otherwise you can not backup it with MtkDroiTool.
If you want to root it, try the last version of VROOT (0.7.9 I think, google for it)
I have flash it with a wrong rom and I can not boot it now, if you can provide me please your original ROM it can help me a lot
dreambo said:
I have the same phone JY-G5S+, have you root it first ?
otherwise you can not backup it with MtkDroiTool.
If you want to root it, try the last version of VROOT (0.7.9 I think, google for it)
I have flash it with a wrong rom and I can not boot it now, if you can provide me please your original ROM it can help me a lot
Click to expand...
Click to collapse
man dont use vroot its backdoored -_-
i have slow net this month i will try to upload it
but i dont know if my imei works for you
its not 2 gb its 1 gb ram its not 2ghz its 1.3 ghz its not its 13 megapixel
Gr4nDT3R0R said:
man dont use vroot its backdoored -_-
i have slow net this month i will try to upload it
but i dont know if my imei works for you
its not 2 gb its 1 gb ram its not 2ghz its 1.3 ghz its not its 13 megapixel
Click to expand...
Click to collapse
Thank you, no warry for IMEI, I can change it with mine.
You can please upload only this files : preloader.bin, lk.bin, logo.bin, secro.img, recovery.img and boot.im (total, less than 45 MB).
If I can access with this the recovery, it must be OK.
thank you very match for you help.
dreambo said:
Thank you, no warry for IMEI, I can change it with mine.
You can please upload only this files : preloader.bin, lk.bin, logo.bin, secro.img, recovery.img and boot.im (total, less than 45 MB).
If I can access with this the recovery, it must be OK.
thank you very match for you help.
Click to expand...
Click to collapse
hi my friend yes i have uploaded the files you said
i compressed it its 7mb
and if we help each other we can make custom rom or port cm or miui
https://mega.co.nz/#!O0BTXQhR!BzFIJtuzGhXIslSNuc9SMZUiBLKEr0oQPAsulRXFecY
thx
Many thanks dear friend, I will test this at home this night, and I tell you.
Sent from my ZOPO ZP990+ using XDA Free mobile app
dreambo said:
Many thanks dear friend, I will test this at home this night, and I tell you.
Sent from my ZOPO ZP990+ using XDA Free mobile app
Click to expand...
Click to collapse
youre welcome if no luck you can reply i will upload the backup rom
Gr4nDT3R0R said:
youre welcome if no luck you can reply i will upload the backup rom
Click to expand...
Click to collapse
You are my saver, thank you very macth Gr4nDT3R0R, I see something on the screen for the first time after a week of break
I can go to the recovery Now
But I need now please the all files, because I can not go after the recovery, it freeze at the JIAYU logo
Note : I have use the scatter file I find in your post at a deutch forum
Many many thanks my friend.
dreambo said:
You are my saver, thank you very macth Gr4nDT3R0R, I see something on the screen for the first time after a week of break
I can go to the recovery Now
But I need now please the all files, because I can not go after the recovery, it freeze at the JIAYU logo
Note : I have use the scatter file I find in your post at a deutch forum
Many many thanks my friend.
Click to expand...
Click to collapse
Did you find any ROM that we can use for that phone?
Not yet, I am waiting for our friend Gr4nDT3R0R.
You can already use the files he upload to revive your phone (you will get a good bootloader and a good recovery) and wait with me our saver
Sent from my ZOPO ZP990+ using XDA Free mobile app
dreambo said:
Not yet, I am waiting for our friend Gr4nDT3R0R.
You can already use the files he upload to revive your phone (you will get a good bootloader and a good recovery) and wait with me our saver
Sent from my ZOPO ZP990+ using XDA Free mobile app
Click to expand...
Click to collapse
i uploaded the rom in this thread go http://forum.xda-developers.com/android/help/jiayu-g5s-elephone-p6i-guide-t2931900