What is the benfit to turning on the "set on boot" setting for CPU clocking. As far as I can tell, the CPU settings i have selected (governor and speed) automatically go into effect once the tablet is up and running.
ChiefIlliniwek5 said:
What is the benfit to turning on the "set on boot" setting for CPU clocking. As far as I can tell, the CPU settings i have selected (governor and speed) automatically go into effect once the tablet is up and running.
Click to expand...
Click to collapse
I thought that the settings that you set go into effect a few minutes after boot up, so that if they crash the device, you have time to switch them back to a stable settings. Set on boot must then put then into effect immediately. Either that or the feature is broken lol.
Related
so i noticed that when i reboot my tab, setcpu is not recognizing (with auto detect). i always have to launch the app and press menu to auto detect it. anyone know how to fix this? my phone would get stuck and reboot if i don't do this after reboot when i put the device on sleep mode (tap power button).
SetCPU seems to have major problems with the tab (it does with mine at least), it's not very beneficial and probably detrimental as the device stands at the moment.
The one time i used it with 'start on boot' after the reboot, the min and max cpu resetted at 19 with a max of 500 :| need to wait for modded kernels.
Sent from my GT-P1000
glad i'm not the only one with this problem. i'll disable it for now until we get some kernels. thx.
I rarely use SetCPU. The default "conservative" mode (100MHz --> 1GHz) is adequate. Of course the current kernels do not allow overclocking, so SetCPU is limited to underclocking (i.e. save battery) or to using the "performance" mode, on-demand (i.e. no need for "run at boot"). As it stands, I need neither, I am very impressed by the "conservative" algorithm.
anybody got any tutorials on getting set cpu to work on the sensation? what do i select at the first boot of set cpu where i have many phone models to choose from as i cant see the sensation
I too would love some ideas on settings
When I used it on the HTC HD2 the recommended settings was to have the scaling set to "On Demand" and the box checked for Set on Boot. max 1000, min 216. The second item you want to do is click on the profiles tab and add Screen Off and set the min and max to 216 each and set scaling to "On Demand". make sure you check the box "Enable". Also make sure you grant permission in SuperUser. These setting work great on the Sensation from what I have seen.
it seems that there is a new OC Deamon on its way:
http://forum.xda-developers.com/showpost.php?p=14638641&postcount=34279
should be default OC-D in AR soon!
Whenever I enter the app, it looks like all my settings have been reset, and it shows me running at 1000mhz (despite me setting the max to 800).
Here's how I'm using it, I change all the settings, click apply, then save profile, then save boot settings. Then I reboot my phone.
Additionally, all the menu items under I/O Scheduler and CPU Governor are tripled. What's going on?
I have problems with the boot settings...from what I understand you have to just reconfigure it every time your phone boots. Kinda sucks.
Also, you don't have to reboot to apply settings: it does it as soon as you hit save.
Ive seen an undervolting option in systemtunerpro and ive seen people talking about undervolting.
what will it do to my phone?
if so what should I under volt it to?
the app has 2 buttons that add or subtract 12.5(I think I can't check right now) to all the values at one time. how many times should I press it?
I've searched but cant find nothing
rom is Prime 5 with bricked kernel 1.0 badass gov
Sent from my Primed Sensation 4G with Beats Audio
If you do it right your battery lasts longer and your cpu will be cooler.
It means that the cpu needs less power than normal. But every cpu is different, so you can probably not undervolt that much like someone other.
If you want to do it right, try this:
Search the App "Stability Test".
Then go into System Tuner and look, which Cpu-Freq. are needed most. These are the ones on which you should focus on to undervolt.
First you can set all freq. -25mv, then run the "scaling stability test" in the stability test app. If your phone doesn't freeze in the next 15 min, you can set -25mv again. Do this until your phone reboots or abort the test itself. Then set it 2 steps above the values which didn't work to prevent reboots.
Now you should change only the freq which were used most. But only one after one. If your phone uses (for example) 192 mhz, 1,08ghz and 1,5 ghz most, first undervolt the 192mhz (again till your phone reboots or you can't set it lower).
Then the same with 1,08 Ghz and then 1,5Ghz. If your phone reboots, set it 2 steps above the value which didn't work, so you can be sure that your phone doesn't reboot again.
If you found out which values your phone can handle, go into "System Tuner", CPU, Voltage, Boot settings, then "Re-apply CPU Settings". For the first time you should set it to "On boot completed", if you didn't notice any problem you can set it to "init.d script".
If this doesn't work for you, go back to "voltages", then hold "reset all/clear" till it changes to "save defaults". Press it once, so your values are set as defaults. If you rebooted your phone you have only to go into "System Tuner" and press "Reset all/clear" once, then it will set your values again.
I hope my englisch is good enough to understand it
Sorry for my English
I am using CM10.1 ROM
I use the No-frills CPU Control to overclock CPU to 1.2GHz(performance cpu governor). However, when I locked the screen and woke it up, my phone would automatically restore the default CPU setting(1.0GHz). I had to go to the app and apply the setting everytime. How could I prevent the system change CPU frequency?
Make sure that the option called "set on boot" is checked. It will automatically apply the settings (overlclock to 1.2) on boot.
Hope this helped
Dbstudioz said:
Make sure that the option called "set on boot" is checked. It will automatically apply the settings (overlclock to 1.2) on boot.
Hope this helped
Click to expand...
Click to collapse
I have already made a tick. I also found that when I locked the screen for a few minutes, there is nothing changed. And if my phone idle for an hour or even longer, then the system would automatically restore the default CPU setting.
Does the system have battery saving mode? How can I turn off it? I haven't downloaded any battery saving apps
Try.. Trickster mod.. U can lock frequency with it..
hafizkris90 said:
Try.. Trickster mod.. U can lock frequency with it..
Click to expand...
Click to collapse
Wow, it works. I can lock the frequency. Thank you very much for your help:laugh:
No prob.. glad i can help..
Sent from my MB865 using Tapatalk 4 Beta