Related
Welcome to Saiy... Install - Mod edit: Broken DL link removed.
For those of you visiting this thread as subscribers to utter! you'll know the history well. A promising release, active development and then silence..... Please accept my apologies - if you don't know that 'sometimes life gets in the way' then you are the envy of most.
A bit of history for you...
To cut a half-decade-long story short, the Fragmentation of Android ground this project to a halt. When I first demoed my creation to the world, I had visions of knocking it up on Android and then focusing on how it functioned in the background. I was about to drown myself in machine learning to bring my vision to life. Job done? Well no...
It turned out that developing an app that covered almost every function available on an Android device (I refuse to say 'phone' - it's not 1983!) , was a job for 1,000+ developers, not just a lonesome one such as I, on a 10 year old Dell laptop - and each time a new update to Android was released, I huddled in a corner and wept, as I waited for the crash reports and 1* ratings to roll in.
It turns out that bugs aren't only specific to Android versions. You multiply that by Manufacturers messing with builds - and devices running multiple versions and then even the Locale of the device causing crashes and you end up with 12,000+ supported devices exponentially multiplied by all other eventualities as your user base.
I drowned... And my (in hindsight) naive plans of master AI'ery, whilst users enjoyed playing with it on Android, dropped down to the bottom of my to-do list. Things had to change.
I decided to shut myself away in a dark room to completely rewrite the Android code, so that it was both readable and scalable; despite its complexity. Rumours flew that I had died - and in some ways, I did....
Not really ^ that just felt justifiably dramatic! :cyclops:
So, utter! is reborn as Saiy® and Open Sourced, so it may have a chance of competing with the big boys, before they run away with all of our private data and souls, in order to use their services...
Install Saiy from the Play Store - here
Note - a direct download link will appear here shortly!
You can get involved by checking out the Development Section in the app, or alternatively, if you're a curious Android Developer, check out the base code published on GitHub here
The code base is pretty large, so briefly, there are two major classes in the app, that direct and distribute work elsewhere:
SelfAware is the main Foreground Service, responsible for managing the application state and channelling voice recognition, text to speech and other API requests.
Quantum is the main processing class, where commands are locally resolved (if required), sensibility checked and actioned.
Understanding the above two classes is essential to following the flow of the full application logic.
MyLog is a global verbose logging toggle. When enabled, the output will flow class to class, as well as display durations for time sensitive functions.
The following remains for the sake of me needing some sleep and posterity
About this thread
Firstly, I’d like to thank everyone for the positive feedback and encouragement and the huge amount of messages I’ve received on YouTube, email, twitter, G+ and here on XDA volunteering to be involved in beta testing. It’s very much appreciated and I apologise that I cannot respond to them all. Please take this intro as a thank you.
This thread is for your open discussion about utter! and the features you'd like to see included, so please feel free to throw your ideas back and forth (be nice to each other) and I’ll do my best to keep up with them when I have time.
About utter!
Unlike other voice applications, utter! will be configurable to the user, enabling you to assign spoken keywords to use the functionality of your favourite applications or make system related changes to your device. There's no cumbersome overlay or launching of another application to use the features, utter! sits in the background ready to be activated, whenever you want, without interrupting whatever you are doing.
Which applications will initially be compatible?
The more interest I can demonstrate in utter! the more likely your favourite application developer will want to make their functionality available to use. The purpose of the YouTube video and this thread is to get their attention and create a more functional first beta release.
I’m a developer and I'd like features of my application to be utter! compatible.
Please contact me to discuss how our applications can work together.
FAQs
Q) Will an offline speech engine be built in?
A) I hope so. I'm waiting to see what features of Google Now are made available to developers
Q) What languages will it be available in?
A) At first, English only. Once I have the framework functioning correctly, I can turn my attention to translations (thank you for the messages I’ve received offering translation help).
Q) Will it use natural speech recognition?
A) Over time it will, but in the testing stages commands will be more structured. As my algorithms develop, so will the application's ability to recognise exactly what you want.
For the conversation mode I’m really up against it. I’m almost trying to reinvent the wheel knowing that Google are no doubt sitting on a very advanced algorithm purposely for this… They are more than welcome to allow me to use it…
Q) How much is utter! going to cost when it’s out of beta?
A) I don’t know as yet. Not more than a couple of dollars... I just need to make sure that whatever the price, it's more than worth it.
Q) Which speech engine does it use?
A) In the video I used IVONA beta (available on the Market here). This option is configurable so you can use a free or premium engine of your choice.
Q) Google’s Project Majel will no doubt surpass this application. Why are you bothering?
A) Perhaps.. It remains to be seen the direction Google take and whether their focus will be too much in the interest of nudging you towards Google services, rather than providing an open and configurable voice integrated assistant.
For example: If you assign ‘Save Battery’ to a command, on detection utter! could go ahead and minimise your brightness level and screen time-out, turn off (or restrict) all data connections, set your device to GSM only, turn off vibrate functions and screen animations, underclock and undervolt your CPU (requires root) etc etc.. Is that what you expect from Majel? Personally, I don’t… [Update - I think I was right about this!]
Q) How do I register to beta test!?
A) Hang around this thread – thank you.
Q) The icon you used in the video for utter! was lame!
A) Yes! I just borrowed the inbuilt icon for now. If you think you can design a better one, please feel free! Maximum respect (at the very least) from the first post is offered in return!
Q) Can you adapt Siri to do these things please?
A) I honestly have had these requests – I’m afraid that’s not going to be possible now… or in the near/far future /ever…
----
By genisis7
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
By goander
By joshaw
By usaff22
utter! release progress
FACEBOOK
TWITTER
CONTACTS
TASKER
BLUETOOTH
WIFI
MOBILE DATA
WORLD TIME
WORLD WEATHER
ROOT FUNCTIONS
Credits
pingpongboss - amazing StandOut library!
usaff22 - amazing icon and artists impression work
meadowsjared - Sharing his coding skills
nobnut - previously unknown generosity
waydownsouth - previously unknown patience and sharing of knowledge
fahadayaz - Bug solving GEEK
Permissions
Code:
All permissions are for device based command purposes. NONE of your personal data is uploaded or shared to any external server of any kind
Change Log
Code:
V2.2.5A RELEASED
Email
Text
Navigation
Facebook
Twitter
Directory Searches
Car Locator
Play Music
Visual Results
Wave-to-wake
+ many more features added! Please see the command list in the app for details.
Changed to foreground application with permanent notification to stop Android killing it!
V2.2.4A RELEASED
Skype fixed
FC's fixed on some commands
Speed increases
Added troubleshooting menu
Changed icon display
Enabled background test code (hidden).
V2.2.1A RELEASED
Code and UI revamp.
Converted to pre-beta background app
Usage details in the application.
V2.1.9.1A RELEASED
MASSIVE CHANGES!
Simply too many to list...
All details in the app
V2.1.0A RELEASED
Mobile data
Twitter
Facebook
Contacts (algorithm test)
Dropped 2.1 compatibility
Fahrenheit added to weather
Initialisation tweaked
Custom listener tweaked
Button labels and Loquendo sample now family friendly :eek:
HUGE code rebuild
V2.0.1A RELEASED
Tasker integration!
World Weather
Custom Listener test
Long-press-search integration
Loads of bug fixes and code improvements.
Fixed Weather and Time force closes on 2.1 & 2.2 devices
V1.9A RELEASED
Root-functions fixed
Tablet compatibility fixed
Errors when no recogniser fixed
Loads of bug fixes and code improvements.
V1.7A RELEASED
Root-functions included!
FIXED - Recogniser button errors
Loads and loads of bug fixes and code improvements.
V1.6A RELEASED
World-Time included
FIXED 'unknown' Bluetooth state message.
Loads and loads of bug fixes and code improvements.
V1.5A RELEASED
Bluetooth voice control test included
FIXED the V1.4A 4.0.3 ICS crash
FIXED FC on back button from config tab
FIXED FC when closing app
FIXED FC for Galaxy Nexus TTS settings
FIXED leaked Receiver
Loads and loads of bug fixes and code improvements.
V1.4A RELEASED
WiFi voice control test included
Loads of bug fixes and code improvements.
V1.3A - RELEASED
Fixed FC on Config Tab
V1.2A - RELEASED
Release version 'jumped' to match Play Store
Totally rewritten UI code
Totally rewritten engine logic
Prevented override of localised English voice
Added test contact loader
Intro changed to audio file
Option to record output to sdcard for translation help
So much else that I've forgotten...
V0.0.1A - RELEASED
Long presses for association are not functional yet
BUGS
Code:
IVONA registers itself in error, even if it may actually work. A full uninstall and reinstall of the IVONA files is required.
Buttons don't reactivate occasionally after utterance - 'utterance' code depreciated.
Weather and Time API's are useless for USA State searches. Need to change provider.
utter! stable version is available from Google Play here.
Saiy stable version is available from Google Play here.
Latest test releases can be found in my more recent posts
Looks like a really promising app!! Subscribed..
Sent by accident from my Amaze using Tapatalk
Looks amazing
Cant wait to try this, am a lot on the road so can use this app.
Keep up the amazing work
subscribed! looking forward to this, it appears to be a much better solution than anything currently available. thanks for your hard work and determination.
Brandall - I congratulate you on what appears to be an amazing product. Would it be possible to navigate certain applications via voice? As an example, is something like this feasible: "Utter - scroll down 25%" to scroll down 25% of the way while viewing a web page in a browser, for instance?
Also, what about controlling a desktop computer via a Windows application/plug-in?
Brandall, this app looks amazing. In 4+ years of XDA'ing, I just hit subscribe for the first time. Can't wait to try it out. Do you have a twitter we can follow you at? Maybe @utter! or the likes.
Can't wait to try it out
Amazing looking app! Definently waiting to dl this asap
Sent Via My Shiny New Droid4!
Can't wait to try this app out have not been that impressed with the other similar apps.
This one looks slick.
Sent from my DROID BIONIC using Tapatalk
Looking forward to trying this out. Sounds like it will be better than what I have seen so far.
Awesome app, need someone to beta test, im ready, just shoot me a pm, subscribed for the first time btw
Looks amazing....
This looks absolutely incredible, I cannot wait to take it for a test drive.......Great work.
"Q) Google’s Project Majel will no doubt surpass this application. Why are you bothering?
A) Perhaps.. It remains to be seen the direction Google take and whether their focus will be too much in the interest of nudging you towards Google services, rather than providing an open and configurable voice integrated assistant."
One of my favorite aspects of Android over iOS is simply choices like this. Majel could very well have aspects that surpass this app and utter! will probably have aspects that surpass Majel - ultimately whichever works best for you personally is the one to go with.
Cant wait to try this when its ready
Sent from my NookColor using Tapatalk
utter!
This sounds utter!y amazing... I am staying tuned!
Subscribed
One of the most promising apps I've seen in awhile....can't wait to try it.
Roland Deschain said:
Brandall - I congratulate you on what appears to be an amazing product. Would it be possible to navigate certain applications via voice? As an example, is something like this feasible: "Utter - scroll down 25%" to scroll down 25% of the way while viewing a web page in a browser, for instance?
Also, what about controlling a desktop computer via a Windows application/plug-in?
Click to expand...
Click to collapse
Thank you. When offline recognition is available it opens the door to many more mundane speech controlled functions. As it stands at the moment, implementing such commands would be more of a gimmick and wouldn't be quicker or save time/effort..
jirafabo said:
Brandall, this app looks amazing. In 4+ years of XDA'ing, I just hit subscribe for the first time. Can't wait to try it out. Do you have a twitter we can follow you at? Maybe @utter! or the likes.
Click to expand...
Click to collapse
Good to know thank you twitter, g+ links in my signature below - I think they work!
Brandall:
I cannot tell you how impressed I am with your creativity, skills and vision in developing Utter! When I viewed the video last week I was in awe; brilliant, incredibly brilliant.
I would be thrilled to assist you in beta testing Utter!
I eagerly look forward to this app.
Sent from my SPH-D710 using Tapatalk
Can't wait to try it out
Hello everyone, after a long time testing I would like to introduce my SpyVisio app in the hope that you find it useful.
SpyVisio is a sort of swiss army knife of the remote surveillance and device safety. This lightweight and compact app encloses a set of functions that can transform your phone into a powerful instrument of control (webcam, ipcam, motion and sound detector, DVR, home alarm, video surveillance, anti-theft, GPS tracks locator, sms interceptor).
Here are some examples of SpyVisio applications:
Baby monitor
When the baby wakes up and begins to move or cry, SpyVisio can:
- Play a song, ring tone, a lullaby or any pre-recorded vocal message with your own voice
- Call another phone
- Send a text message
- Send an email
In addition, at any time you can call SpyVisio and listen to what is happening or access it through internet and see the images taken by its camera. All events are stored in the device memory and may be consulted at any time (even remotely).
Home security system
Place one or more SpyVisio devices in the environment being controlled. In case of suspicious noises or movements you will be notified on your control phone and you could take countermeasures. SpyVisio can also sound an alarm and operate as a DVR. The images taken by its camera can be viewed in real time remotely through a standard internet browser.
Car protection
Someone likes to scratch or harm your car? Just put SpyVisio suitably hidden in the passenger compartment and it will record all suspicious movements taking place around.
Phone theft
If someone steals your device, then you can use some special SpyVisio functions to track down the thief:
- In case of SIM replacement an SMS will be sent to your control phone with information about the new SIM card and the new phone number
- By issuing SMS commands to SpyVisio you can get information on demand about the ingoing/outgoing calls & messages or the GPS locations of the last 24 hours and try to get emails with pictures of those who are using the phone.
Anti-curious phone
With phone in Stealth mode, its screen turns off but all alarm functions are still active; if someone approaches your phone it can sound an alarm, take photographs of him and prevent access to other applications, ensuring maximum privacy. SpyVisio prevents anyone from using your phone without your knowledge and so you can leave it around without too many worries.
Secret investigator
Do you want to know where someone dear to you has spent the day? SpyVisio can store the tracks of the movements made in the last 24 hours and you can read them individually, or view the entire path with Google Maps or Google Earth. Every message sent or received from SpyVisio phone can also be repeated automatically to another phone (control phone). Do you want to know if in your absence something strange happens in your house? Just put SpyVisio in the room you want to check and it will record everything that is moving or making noise.
All feedback is welcome, so please let me know what you think of the app! Since the app is released for free on Play store you can, if you want, try it and post about it wherever you like!
Might want to put a link to the Play Store, just a recommendation.
Joshmccullough said:
Might want to put a link to the Play Store, just a recommendation.
Click to expand...
Click to collapse
Yes, that is a good recommendation.
Unfortunately xdadevelopers prevents those who have less than 10 posts on the forum to include links
However just search SpyVisio on Google, the download link will come out as the first result.
Paulpi2 said:
Yes, that is a good recommendation.
Unfortunately xdadevelopers prevents those who have less than 10 posts on the forum to include links
However just search SpyVisio on Google, the download link will come out as the first result.
Click to expand...
Click to collapse
Dur, didn't even think about the x<10 post limit, my bad Yeah, I found it through the Play Store, thanks for the tip!
With the new release SpyVisio 1.2 you can now generate a GPS NMEA-0183 log and import it in Google Earth. In practice you can do all the GPS Cookie (Kickstarter project) does but without having to buy the cookie
New release SpyVisio 1.3
Some minor bugs have been removed and a new data storage management provides compatibility with KitKat.
Paulpi2 said:
New release SpyVisio 1.3
Some minor bugs have been removed and a new data storage management provides compatibility with KitKat.
Click to expand...
Click to collapse
Link for the app - Click here
This sounds like a nice app. I wish I could use this with my tablet, but google play says only my phone can use it. It's a Dell Venue 8 with GPS, but wifi only model. Any chance you can make it available to tablets with gps? The baby monitoring sounds great. Thanks for the request!
Can this work on galaxy tab 3 7.0 running 4.1.2? Google play won't let me download.
Thanks,
Levi Woodard
Sent from the XDA premium app.
New release SpyVisio 2.1
SpyVisio is now compatible with most surveillance apps (IPcam Viewer, TinyCam Monitor, IP Cam Viewer) besides PC programs like VLC and Yawcam.
Here are the main characteristics of v.2.1:
- SMS interception
- Sounds/images player/recorder integrated on board
- Embedded Http server with DNS support for dynamic IP
- IP camera Server (supported protocols: server push MJPEG, snapshot JPEG, MO_O/MO_V)
- Management of remote commands via SMS
- Scheduler for programming weekly surveillance
- Log generated: events of the last 24 hours in CSV format, last 10 in/out calls, last week SMS, GPS position in KML and NMEA format
- Send SMS/email information in case of alarm or on request
- Send SMS automatically in the event of unauthorized SIM replacement
- Phone Call in the event of alarm
- Automatic answer of calls from the control phone
- Stealth mode
- Detection of movements and sounds
- Customizable protection zone
- Support of both cameras (front and rear)
- Voltage grid detection
- Circular memory recording
- Siren sound customizable
- Enable/disable alarm via Bluetooth
- Maximum privacy, the images are not uploaded on a remote server
- 3 configurable user profiles
- User manual included
- Free of ads
More details on: http://www.optivelox.com/spyvisio
New release SpyVisio 2.2
SpyVisio now supports geo-fencing alarms.
Note:
SpyVisio has been recently suspended and removed from Google Store as it could carry out spying or surreptitious tracking of others !?
The app can be downloaded for free at: http://www.optivelox.com/spyvisio
Hello, I am an independent developer and I have made an application called "Here I Am". I claim that this app is better than most location reporting apps in the market and I am requesting you to kindly try this application out and tell me what you think.
Be it your mom, dad or your significant other, there is always someone who cares about you when you leave home. They want to know again and again where you are but you cannot stop your car and type texts like that. Here I Am serves you by periodically sending information of your current location in the form of SMS to that person.
But here's what makes it UNIQUE:
This app sends the texts in human readable language. The receiver will not be staring at the screen trying to figure out what do those coordinates mean. Because there will be no coordinates, nor will there be a link forcing them to open a web browser every time. The app will simply send texts in the following format:
"I'm at STREET NAME near LANDMARK", or
"I'm at STREET NAME, AREA NAME, heading towards LANDMARK. Just crossed A LANDMARK BEHIND ME".
FEATURES:
- Easy to use (provide a contact and forget everything).
- Detailed and advanced settings for users who want full control.
- The receiver only needs to read the sms, without the struggle to interpret it.
- This is a truly BEAUTIFULLY designed application.
- Look ma! No hands: You activate the app and forget it. The app will do all the work at the appropriate times.
TLDR;
This app can periodically send texts to your selected contact about details of your current location. This usually includes the street name and if you are moving towards or away from some place, it can include that place's name as well.
The application uses it's handcrafted algorithms to detect if it needs to tell about your movements or not.
Play Store Link:
https://play.google.com/store/apps/details?id=com.appsbyusman.hereiam.premium
Donate Version is available at:
https://play.google.com/store/apps/details?id=com.appsbyusman.hereiam.pro
NSA and Law Enforcement just said Thank you very much
NINexus-5-nineinchlollipop-r8
LOL the possibilities are countless
I have updated this app. A better version is now available as a separate installation which has improved visuals and better precision and it should continue to receive updates. You can download this updated app from the play store using this link:
https://play.google.com/store/apps/details?id=com.appsbyusman.hereiam.premium
Hello, everyone!
I would like to share the news about the new app called Pace Control. It is written for runners to help them improve their training and race times. I am quite active amateur runner (I regularly run 4-5 days a week) and I found it difficult to find the app meeting my expectations, I decided to write the app myself. I have run with it for almost a year (of course not the same version) and I believe it's time to share the app with other runners.
---
KNOW AND CONTROL YOUR PACE.
Would you like to improve the quality of your training and run exactly as fast as you should?
During a race do you think you run quite slow while in fact you start too fast and you are too tired later to finish in planned time?
Would you like to run with negative split strategy, but you find it too difficult to calculate and check split times?
If you answered "yes" to any of these questions, you will probably be a happy Pace Control app user!
MAIN FEATURES:
Reliable pace information - pace calculation algorithm optimized to handle gps signal in a way which results in stable and reliable readings.
Finish time prediction - calculation of estimated finish time based on distance already achieved and current pace.
Shadow runner - tracking race progress vs a virtual runner running a race in a predefined time and with predefined strategy.
Negative split - improve your results by running with negative split strategy (start slower and gradually speed up).
Voice feedback - no need to look at your phone to get information, you will hear the messages read to you in your headphones.
Map - you can see the track you run on the map.
Save to GPX - tracks you run with the app can be saved to a gpx file, so they can be imported to external tools or sites for analysis.
APP HOMEPAGE: http://pacecontrol.pbksoft.com
USER MANUAL: http://pacecontrol.pbksoft.com/manual.html
GOOGLE PLAY: http://play.google.com/store/apps/details?id=com.pbksoft.pacecontrol
FACEBOOK: https://www.facebook.com/pacecontrolapp
TWITTER: https://twitter.com/pacecontrolapp
Support for miles added!
Version 1.3 with map is available. Try it!
There is a version 1.4 available. Why don't you download it?
Pace Control app has just achieved 1000 downloads!
Version 1.5 is out!
Change list:
• improvements of voice feedback
- you can decide whether to hear standard messages or more informal but shorter ones.
- when some other app is playing music when a voice feedback message is to be played, Pace Control can ask the app to either lower volume or pause the playback completely.
- possibility to decide whether to hear extended message after each kilometer/mile.
- support for Australian English voice.
• some minor changes
Version 1.6 is already available. You can now export your workouts to external running services (Endomondo is the first one supported). The app also has a German translation.
Can you make the app ding with two separate notes for fast pace/slow pace with a user setting for how far off pace the dings happen?
E.g. App Settings:
Above Pace Ding
woahh.mp3 (user selectable)
Above Pace Cutoff
5 seconds (user selectable)
Below Pace Ding:
fireundermyass.mp3 (user selectable)
Below Pace Cutoff:
10 seconds (user selectable)
jojosalami said:
Can you make the app ding with two separate notes for fast pace/slow pace with a user setting for how far off pace the dings happen?
E.g. App Settings:
Above Pace Ding
woahh.mp3 (user selectable)
Above Pace Cutoff
5 seconds (user selectable)
Below Pace Ding:
fireundermyass.mp3 (user selectable)
Below Pace Cutoff:
10 seconds (user selectable)
Click to expand...
Click to collapse
Thanks for your suggestion. It took a while to respond, but I was working very hard on adding the workout history and now (should be releasing in the nearest days) history export/import.
Could you, please, help me understand better how you want to use the feature you proposed? I always run with voice feedback turned on, so I usually don't have problems with correcting my pace, because I receive messages every 200 meters (or 1/8 mile). The feature would bring benefit in case you are off the desired pace very much - in this case you would probably receive a "ding" sooner. Do I understand correctly?
Hello, runners!
Pace Control is still alive. Version 1.8 with remote race functionality is ready for beta testing. Remote race lets you run a race against another runner who can be far far away from you. You run at the same time and you both have real-time feedback, so you know how fast the opponent runs. Learn more about remote race at http://pacecontrol.pbksoft.com/remote-race.html.
To become a beta tester, please, register at https://play.google.com/apps/testing/com.pbksoft.pacecontrol. Send all your bug reports, requests, feedback etc. to [email protected].
Notes:
1. Beta version may contain bugs (this is why we test it, to find these bugs right?). We advise not to start experimenting with beta version right before you plan to use the app during some important running event.
2. But don't be afraid too much! We believe that you will find the remote race so enjoyable that it is worth to take a risk and try that beta!
3. Remote race requires sending information about the progress of your run to the server so that your opponent can access this information. Your location is not sent to the server, only the information about how fast you run is stored there (as well as some basic information about the race). App's privacy policy available on our web page will be updated accordingly to reflect this when beta test is finished.
good
try it and good!
Remote race is considered stable and is available in regular version of Pace Control to be downloaded from Google Play. Try it, it's worth it.
You can read more at: http://pacecontrol.pbksoft.com/remote-race.html
Version 1.9.0 which presents more detailed stats about workouts is available. Anyone interested in trying this version and sharing thoughts?
You can try 1.9.2. Even more stats and an option to prevent accidental clicks during workout are available.
In the meantime I released 1.9.3 with GDPR compliance (affects users from European Economic Area) and I started working on adding charts to workout summary screen. I hope you will enjoy these changes.
Merry Xmas to all users!
In the meantime I just want to let you know that Pace Control 1.9.4 has very nice graphs. Why don't you try it?
And, of course, I strongly recommend to try remote race functionality which gives you a lot of fun and I have not found anything similar in any other app. To learn more, please, read: https://pacecontrol.pbksoft.com/remote-race.html
Anyone from Greece here? Greek translation added!
Looks well, new version is good
Thanks.
The new Trycorder 5.2.3 is in the download section on top of this page
Now with Trycorder5, The Trycorder is connecting with a central server who receive every orders from planetary trycorders. Those orders are logged, and executed on the server. (Some Text-To-Voice system here translate your action into an audible message on the bridge (the development computer area))
The Main Intelligence of the central server can respond to you.
Download : http://forum.xda-developers.com/devdb/project/?id=15530#downloads
Screenshots : http://forum.xda-developers.com/devdb/project/?id=15530#screenshots
Manual : https://forum.xda-developers.com/devdb/project/dl/?id=22505
For the non-trekkies, a Trycorder is a portable measuring tool, communication tool, and remote-control tool for your Starship.
This is an itch I had to scratch for a long time.
I wanted a full fledged trycorder without announcements, free as a beer, and free public code.
I did'nt found what i was searching for, so I made one.
The wish to have a full trycorder was so strong, I had to Learn Java, Learn Android-Studio, Learn Android Programming, starting with a classic "Hello World!" program, Learn Activities, Fragments, Permissions, and the rest, and all of this Before I started a single line of my project.
After 3 long and painful months, I finally started the project, and drived it to a version 1.0, where I decided to share my fun with others.
With this Trycorder, You can do the following:
- Look, feel, and sound like the federation trycorder.
- Fits in your pocket, so you can beam out on demand.
- Scan your environment, temperature, pressure, light, magnetic, gravity, orientation,...
- Control the device by voice-command. (Press top left, and say "computer fire" or "computer beam me up" for example)
- Take pictures and recordings from your findings on new planets.
- Remote control your own starship, fire, communications, shields, transporter, viewer, ...
(You have to provide the starship, and make sure it is on the wifi router that you use).
- Consult logs of operations. View the pictures and recordings you got back from your away mission.
- View Magnetic, Orientation, Gravity, Temperature sensors values drawn in the sensor area.
- View Phaser, Torpedo, Transporter operation in your sensor screen.
- View Shields, Communication Waveform, Tractor Beam sensor animation on your sensor screen.
- The application is usable in space, provided your phone is space-proof, and you wear a space-suit.
- The application can be adapted easily for different starships remote protocols.
- For captains only: Crew Information and Evaluation module. (to be found under logs/crew) (Contacts access)
- The communication module is real and functionnal between all trycorders on the planet and in orbit as long you are connected to the public internet.
- And many more to come ...
Here it is.
Download the APK, and install from here in the Downloads section (on top of this page).
or Download the sources on github and have fun with android studio (Download link below).
Dont forget to come back here and give me your advice, comments, appreciations or depreciations as well.
And if you have some ideas to propose, or code to submit, i would be glad to add it to the main trycorder application.
Tested on:
Samsung Galaxy Nexus (GT-I9250): CyanogenMod 6.0.1, CyanogenMod 5.1.1
Motorola Moto-G (XT-1032): CyanogenMod 6.0.1, CyanogenMod 4.4.4
Samsung Ace-II (GT-S7560M): CyanogenMod 4.4.4
LG P705g: Stock 4.0.3 (unrooted plain stock)
Tablet Datawind 7Ci, Android-4.1
Please tell me of your success so i can add to the list of tested phones.
Remember: Every button has a function, and every surface is used and clickable. some functions may not be obvious, like speech recognition that you activate by clicking in the top left corner in the curve. (just try "fire" , "beam me up", "and others you think of..." , or read the source code for a complete list of words who trigger actions.)
The trycorder contains more than 40 operating buttons, 9 animations, dozens of sounds, around 8 sensors, speech recognition and voice interaction, and a new captains-only crew evaluation and information module, now, at version 1.9.1
Have FUN !!!
For those who have a Force-Close on first opening, make sure your android device is setup this way.
Have Google Text-to-Speech installed and running in default us-english (and more if you need)
Have Google voice recognition active for us-english (and more if you need)
Have Google map installed (optionnal but nice to locate yourself on the current planet)
Have Location service Enabled (GPS)
Have Wifi operationnal (for info about your internet connection in the info panel, and location service)
Allow all five permissions that the application ask for.
For those who write android code too, this trycorder is made of hundreds of differents examples
in the differents forums i follow. This is a good example of over-populated buttons groups, with a lot of
examples applications all mixed together, trying to look like to a useful tool.
This fantastic tool, helped me learn everything (hum! almost) in android where I had an itch for.
Now people on XDA have a fantastic toy, to play with, learn in, and impress friends.
XDA:DevDB Information
Trycorder, App for all devices (see above for details)
Contributors
mlsoftlaberge
Source Code: https://github.com/mlsoft/Trycorder5
Version Information
Status: Stable
Current Stable Version: 5.2.3
Stable Release Date: 2018-02-14
Created 2016-06-02
Last Updated 2018-02-14
Trycorder functions
Here is what this Trycorder can do.
---------------------------------------------------------------
Look, feel and sound like a real one.
Use your phone sensors to scan your environment.
Use your camera to detect alien lifeforms.
Respond to voice commands.
Control almost fully every operations of your orbiting starship, by remote control.
You can beam up to your ship autonomously, (you have to provide the starship).
And a lot of other scientific functions.
In fact, you can fly around the galaxy with it, and use it on every planet you wish,
provided that this planet is part of the federation, and have a GPS satellite system.
If your phone is Space-Proof(tm) , you can even use it in space outside the starship
(use of a Space-Suit is recommended for use in space)
Where is the download link?
Sent from my HTC One M9 using XDA-Developers mobile app
B. East said:
Where is the download link?
Sent from my HTC One M9 using XDA-Developers mobile app
Click to expand...
Click to collapse
the download link is on top of the page in the section download, just after the section discussion where we are now.
Yeah, no download link for me either.
Sent from my LG-H830 using XDA-Developers mobile app
Switch to the XDA 2013 theme and it should be there.
DimidiusDeus said:
Yeah, no download link for me either.
Sent from my LG-H830 using XDA-Developers mobile app
Click to expand...
Click to collapse
I added a link to the APK in my google drive. maybe easier for the people to download.
mlsoftlaberge said:
I added a link to the APK in my google drive. maybe easier for the people to download.
Click to expand...
Click to collapse
Thank you for that. Just an FYI... When using the XDA mobile app, the download section doesn't show up. At least for me anyway. Now that I am on a PC, I see the download section and the link. Downloading now
For those who liked this trycorder, I uploaded a version 1.1 today.
-----------------------------------------------------------
Sent from my slow development computer.
Since i cant stop adding features, here is the version 1.2 (Download links in announcement)
Changelog:
Added a sound wave visualizer.
prepared the code for many other enhancements.
A brand new 1.4 version just hit the download section today.
Added a tractor-beam controller, and refined some animations.
Have Fun
Was really interested.
Installed it from Drive, and it FC'ed on my MM 6.0.1.
Too bad.
agovinoveritas said:
Was really interested.
Installed it from Drive, and it FC'ed on my MM 6.0.1.
Too bad.
Click to expand...
Click to collapse
this application need a lot of permissions, on MM you have to set the permissions yourself
go to:
Settings -> Apps -> Trycorder -> Permissions
and then give all permission requested
I wish i could find a way to set it automatically,
with KitKat and Lolipop the problem do not happen
agovinoveritas said:
Was really interested.
Installed it from Drive, and it FC'ed on my MM 6.0.1.
Too bad.
Click to expand...
Click to collapse
Good News.
This morning I uploaded version 1.5, who manage permissions automatically.
Please try again with this version, the FC should be solved.
I tried version 1.5 and it just force closes when you start the app, I'm using HTC M9 marshmallows all stock.
Sent from my HTC One M9 using XDA-Developers mobile app
The version 1.7 is out.
Its supposed to solve all Force-Close. (mainly due to speech recognition)
Let me know of your success or bugs.
Wow! the 1.8 version is out. I will take a pause before the version 1.9.0.
mainly this version contains no specific changes from 1.7, and is declared stable enough for mass production.
I am working now on a brand new extension to the trycorder, (for captains only), and will keep it a secret for now.
Remember: Every button has a function, and every surface is used and clickable. some functions may not be obvious, like speech recognition that you activate by clicking in the top left corner in the curve. (just try "fire" , "beam me up", "and others you think of..." , or read the source code for a complete list of words who trigger actions.)
The trycorder contains more than 40 operating buttons, 9 animations, dozens of sounds, around 8 sensors, speech recognition and voice interaction now, at version 1.8
Have FUN !!!
The version 1.9.0 just hit the Download area. (for captains only)
It introduce the Crew Information and Evaluation Module. (Contacts)
Its found in the Logs/Crew button.
Have fun!
Oufffff. The version 1.9.1 is out.
Full integration of Crew Evaluation and Information module in the trycorder. (Contacts)
Lets take a break.... few hours, maybe days.
I will be back with starship inventory module. (hopefully)
If some of you have success running the application, please report to me ,
so i can know what you like or not.
Oufffff. The version 1.9.1 is out.
Full integration of Crew Evaluation and Information module in the trycorder. (Contacts)
Lets take a break.... few hours, maybe days.
I will be back with starship inventory module. (hopefully)
If some of you have success running the application, please report to me ,
so i can know what you like or not.