I have an Asus Transformer TF101 and ever since KatKiss 4.3.1 and now with KatKiss-4.4.2_019.and all the latest gapps, etc. I have not been able to use my Western Digital 320Gb external (non powered except by the tablet) usb drive. I can use a 32gb usb stick and below by adding the Stickman app and have tried some other otg apps. Even tried Katkiss app. Nothing seems to either give the power to drive now or makes it available.. It does work with 4.2.1 and the stock one which if I remember right was 4.0.1.
Any ideas?
Thanks in advance
j22barb
New ROM 4.4.2 and usb external non power hard drive
ASUS TF 101 used to be able to power an external 320GB WD portable hard drive, non powered. Since the new rom 4.4.2 it does not.
Any ideas as to how to get it to work?
Forgot to mention, I can use the Asus external/attachable keyboard and connect the WD USB 320GB hard drive to the USB slot on the keyboard and it works fine.
Sent from my Transformer TF101 using xda app-developers app
Related
i just received my micro usb OTG cable. When I connects the USB thumb drive to my Xoom, i cannot see the content of the USB thumb from Astro or es file explorer.
Can anyone help? thanks.
are you doing anything to mount the drive?
i need to mount? I thought with 3.1, it will auto detects my usb thumb drive. Any idea how to do it? thanks.
yiyehhu said:
i need to mount? I thought with 3.1, it will auto detects my usb thumb drive. Any idea how to do it? thanks.
Click to expand...
Click to collapse
same for me , i can hot swap usb mouse / xbox360 controller many times , 1'st time I connect a usb flash drive I can see contents it in astro , disconnect & re-connect no contents untill I restart ???
does tiamat 1.4.2 support hotswapping of usb drives ??
Lots of these topics floating around. All looks the same after u connect a file/drive u have to reboot. Kinda sucks. Mice/controllers/keyboard not effected. I wish a dev would pop in and just say yes u have to reboot all the time or there can be a solution or something.
Sent from my Xoom using XDA App
Are you sure you got an host cable? Do any other devices work with it? Like a mouse or controller.
Sent from my HTC HD2
Drives over OTG are indeed hotswapable. I do it all the time.
bigrushdog said:
Drives over OTG are indeed hotswapable. I do it all the time.
Click to expand...
Click to collapse
first let me say thankyou brd , every mod I have done has come from your posts.
I am quite diligent and read everything I can before I flash or mod and even post in the forum , but , is there something I could have missed that causes me problems hotswapping usb drives , I am at a loss . .
thanks
Just an update on the need to reboot to access usbOTG. I got my official USB adapter today from Motorola. I have hot swapped 5 different drivers and sticks and it reads every time. Even my 250gb WD portable hard drive.
Sent from my Xoom using XDA App
hoola20055 said:
Just an update on the need to reboot to access usbOTG. I got my official USB adapter today from Motorola. I have hot swapped 5 different drivers and sticks and it reads every time. Even my 250gb WD portable hard drive.
Sent from my Xoom using XDA App
Click to expand...
Click to collapse
@ hoola
so did you have a grey otg cable and got the same results as others and I have got , and now you have the official host cable as is well ? am I correct ?
also exactly what are you running , and the route you took to get there , i.e. my route was
uk 3.01 , one click, tiamat as they came out untill 1.4.0 > BRD's cwm flashed 3.1 update > tiamat 1.6ghz with usbmass storage (thats not working too well for me)
thanks
I had a grey/clear generic cAble. I rooted using another method on another site then *redid* it using brd method . I just tried using the generic cAble and it does not read after first swap until reboot. With moto cable it sees all devices . I switched out like 20 times in a row with 5 or so devices (USB , external, USB card reader, few sticks) and it reads every time.
Sent from my Xoom using XDA App
hoola20055 said:
I had a grey/clear generic cAble. I rooted using another method on another site then *redid* it using brd method . I just tried using the generic cAble and it does not read after first swap until reboot. With moto cable it sees all devices . I switched out like 20 times in a row with 5 or so devices (USB , external, USB card reader, few sticks) and it reads every time.
Sent from my Xoom using XDA App
Click to expand...
Click to collapse
Thank's hoola , have spent hours reading this and another forum just to get that info ,looks like i have found my problem , i need a "proper" otg cable (-:
I can't seem to anyone else who has this problem. My TF700 is working great. However, today I decided to bite the bullet and install CleanRom. After unlocking, I realized that my computer can no longer see the tablet via USB. It is not an unrecognized device, just nothing happens when I plug it in.
I have tried two different cables on 3 computers, so I believe the problem is with the tablet itself. It charges just fine and when I plug the cable into the computer or unplug, the screen comes on (just like when you plug in the charger), so something is getting recognized.
I don't see any physical damage to the port, it looks fine.
Anyone else ever seen this?
Thanks,
Chris
So it was working previously?
Thats OK said:
So it was working previously?
Click to expand...
Click to collapse
It was, not sure how long ago though. I know it was when I first got it. I'm guessing it is a hardware problem, but not sure what to do about it. I honesly don't care all that much about it, but I would love to get TWRP on it so I can flash roms. I haven't seen a way to get TWRP on it without the USB or GooManager, but I can't run GooManager because I don't have root yet.
Still trying to search to see if there is a way to get root without USB, but I haven't found anything....
-Chris
Chris,
See if downloading and installing PC Suite from Asus helps.
That might get the drivers working again.
Are your PCs win7?
Just a thought. I am not running clean rom but when u connect to ur pc try going to settings, storage, and and hit the 3 little dots on the top right. It should show some usb connection tab.
Sent from my ASUS Transformer Pad TF700T using XDA Premium App
rail205 said:
Just a thought. I am not running clean rom but when u connect to ur pc try going to settings, storage, and and hit the 3 little dots on the top right. It should show some usb connection tab.
Sent from my ASUS Transformer Pad TF700T using XDA Premium App
Click to expand...
Click to collapse
Thanks, I'll try the software install, but since the computer doesn't even tell me I have an urecognized device (nothing in device manager), I'm not sure that it is. I also already rolled back to stock ICS and also tried the storage settings to no avail.
I unfortunately think I have a hardware problem. I guess I'm stuck at trying to get it repaired, or just live without the USB connection....which I guess ultimately means no customizations. I can still flash back to the stock Jelly Bean using the factory bootloader and rom from the Asus site, so I may have to live with that.
Could be the cable. Sadly, replacing it is ridiculously hard.
ShadowLea said:
Could be the cable. Sadly, replacing it is ridiculously hard.
Click to expand...
Click to collapse
I wish it were. I have a second charger/cable and already tried both cables on different PCs. Uggh.
Connect the tablet to a PC running Linux and run lsusb to see if the tablet is recognized (the vendor ID is 0B05) - just to sidestep any possible Windows driver issues.
i have two questions:
i saw this thread in the tf300t section with this mod:
http://forum.xda-developers.com/showthread.php?t=2209924
and i was wondering if it will work for our device and if not, someone could make it work for our device
my second issue is that my laptop just broke down, so i wanted to use my tablet+dock to transfer files to my phone. but when i plugged my phone in my dock with the usb-cable, nothing big happend. my phone began charging and asked is i wanted to mount usb-storage. i pressed yes but still i couldnt transfer files to my phone. is this even possible?
Sent from my ASUS Transformer Pad TF700T using xda app-developers app
rickvrolings said:
i have two questions:
i saw this thread in the tf300t section with this mod:
http://forum.xda-developers.com/showthread.php?t=2209924
and i was wondering if it will work for our device and if not, someone could make it work for our device
my second issue is that my laptop just broke down, so i wanted to use my tablet+dock to transfer files to my phone. but when i plugged my phone in my dock with the usb-cable, nothing big happend. my phone began charging and asked is i wanted to mount usb-storage. i pressed yes but still i couldnt transfer files to my phone. is this even possible?
Sent from my ASUS Transformer Pad TF700T using xda app-developers app
Click to expand...
Click to collapse
First question is no, not that I know of. No one has investigated if it works or not on this device. But I would think it would. They can use the same identical keyboard.
Second question is yes you can, but you will have to use USB debugging (ADB) to do it. Then you can push files from your device to your phone. They can't just connect together like one was a computer and the other was a media device or attached storage.
If your phone can accept a micro flash card, you could transfer it that way too.
Hello, I had a tab2 7" more than a year ago. I remember using mouse and other usb otg devices on it.
Then I sold it. I can't remember what rom was on it.
I remember usb otg notifications worked, telling something like "mouse is connected" etc
Now I got another one, it has custom rom installed but usb otg isn't working and was trying to figure out the new ROMs.
I tried lots of latest roms with no luck.
Kitkat ones are great, run smooth, but when I try to connect a mouse it doesn't work.
Then I read that on CM based roms native usb otg isn't working. One can browse usb pens with apps, but no luck with other devices.
I don't care about storage, I need mouse/keyb and other input devices working.
Do someone use USB mouse or keyboard? What rom/kernel?
I'm starting to think it could be ICS since it was soo much time ago?
Thanks,
Robert
rc87 said:
Hello, I had a tab2 7" more than a year ago. I remember using mouse and other usb otg devices on it.
Then I sold it. I can't remember what rom was on it.
I remember usb otg notifications worked, telling something like "mouse is connected" etc
Now I got another one, it has custom rom installed but usb otg isn't working and was trying to figure out the new ROMs.
I tried lots of latest roms with no luck.
Kitkat ones are great, run smooth, but when I try to connect a mouse it doesn't work.
Then I read that on CM based roms native usb otg isn't working. One can browse usb pens with apps, but no luck with other devices.
I don't care about storage, I need mouse/keyb and other input devices working.
Do someone use USB mouse or keyboard? What rom/kernel?
I'm starting to think it could be ICS since it was soo much time ago?
Thanks,
Robert
Click to expand...
Click to collapse
Mine is working perfectly smooth with Sungsonic ROM and Next Kernel.:good::good:
bbugger said:
Mine is working perfectly smooth with Sungsonic ROM and Next Kernel.:good::good:
Click to expand...
Click to collapse
WIRED ONES?
I know bluetooth ones work. I need to know about wired.
thx
bbugger said:
Mine is working perfectly smooth with Sungsonic ROM and Next Kernel.:good::good:
Click to expand...
Click to collapse
Thank you. With that combo I was able to diagnose a fault in the otg cable.
Repaired it and it works, now I'll try the other roms.
Both usb wired mouse and storage works perfectly with Sungsonic ROM v7 and Next Kernel 2.1.6
:good:
everything works fine on 4.4.x too. The fault was the damn usb otg cable.
hi to all, I have a Nexus 5 with the CM11 installed. I have an otg adapter, it works with normal pen drives but I have problems with those two things:
1)a memory card reader, when I connect it to the phone I see "preparing usb storage" for a couple of seconds and Ican even see the card contens, but after hat I get "usb drive removed unexpectly" and I can't see anything anymore. the reader works perfectly on pc, tvs and any other device I tried.
2)a gopro hero2 camera, I sherched on the internet and found out that it should work. I turn it on and than connect it to the phone, the camera display shows "usb mode" for less than a second and then it turns off
what can I do? It's an OTG, phone or devices problem?
thanks in advance
Have you tried it on stock with stick mount? Might be a rom issue
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
Have you tried it on stock with stick mount? Might be a rom issue
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
nope, I flashed CM after two days of stock android, I don't even have the OTG a that time....in a couple of days I should be able to try another OTG at least I can be sure that the problem isn't there
I tried with my Galaxy Tab II (stock rom). the GoPro works but the card reader doesn't (maybe 'cause it's very cheap). I think my Nexus do not provide enough power through the usb port. I think I'll ask on the official CM11 forum if this is a known bug or somenthing else.
PS I've another small question: my phone notified me about a new CM release, Will the OTA updater wipe my phone?