Related
Hi all. Tried my first root + custom rom installation and i messed up the device..
i had the newest KIES firmware update (phone XXBMA5) and (XXBMA6) and i rooted the device with odin (3.07). That went OK.
Then i installed the CWM recovery with odin and that was OK too.
Then i downloaded the latest Omega Rom (i missread that it supports N8020) and followed the installation instructions to the point where it started installing Omega V2.0 from SDCARD and then it asked me to select device from a list that included only (N8000,N8010,N8013)..
So the situation now is that i have working odin, working CWM and backup of the EFS (img+tar) but no working recovery. i live in Finland and the device is Sonera locked i think, so the stock roms (international) do not work i guess.
KIES has a backup of my Note but i can't even get to a point where KIES discovers the device.
So basically i think i need a working ROM for my model (Note 10.1 4G N8020), or can i recover the original samsung software somehow ?
Any advices ?
Removed
Just a thought, but can't you reflash CWM or the stock recovery?
If you didn't install the rom why do you need to re-install anything. Just powering down and powering up should have left you as was....
Alajarvi84 said:
working CWM .......... but no working recovery.
Click to expand...
Click to collapse
Maybe i'm missing something but isn't CWM your custom recovery?
It doesn't sound like you've actually installed any rom yet.The Omega installer doesn't actually install anything until a few steps after the one you mentioned about the model type.
I'm with ultramag69 on this one. You should still be on a stock rom unless you already wiped your original rom.
Hi again. Problem solved, just had to do emergency thing from KIES. Like i said this was the first time trying root + custom ro install and to be honest it went to ****. Somehow i managed to delete the stock firmware so that is why the recovery gave me (no files). I did make some backup but when tried to restore it said MD5 mismatch or something. At first the KIES emergency recovery could not find the device, but after i switched from CWMcto stock recovery it worked.
So what did i learn from all this ? Nothing, because i am getting too old (tired+lazy ) to do proper investigation. So one could say my strategy is to bang my head to the wall as long as it takes to go trough. Even if i could just go around it
So basically i am now at the point where i started, with stock 4.1.2 rooted. Used the triangle away to wipe the (6) custom installs or something away, but it still says custom in the settings> information. Does this mean that OTA won't work ? Any way around it ? Because i would like to check now and then that is my version of android the newest one..
Could someone recommend a custom ROM for my Note 10.1 4G (LTE) N8020 4.1.2 because the only one i was able to find was the CyanogenMod (or something) and it basically makes the S-Pen (almost) useless. What i would like is the Omega ROM, but like stated before the installation only supported N8000, N8010 & N8013...
Added screenshot from info.
Thanks anyway
What is truly amazing is that i did not brick the device tough..
switch from cwm to stock
Alajarvi84 said:
Hi again. Problem solved, just had to do emergency thing from KIES. Like i said this was the first time trying root + custom ro install and to be honest it went to ****. Somehow i managed to delete the stock firmware so that is why the recovery gave me (no files). I did make some backup but when tried to restore it said MD5 mismatch or something. At first the KIES emergency recovery could not find the device, but after i switched from CWMcto stock recovery it worked.
So what did i learn from all this ? Nothing, because i am getting too old (tired+lazy ) to do proper investigation. So one could say my strategy is to bang my head to the wall as long as it takes to go trough. Even if i could just go around it
So basically i am now at the point where i started, with stock 4.1.2 rooted. Used the triangle away to wipe the (6) custom installs or something away, but it still says custom in the settings> information. Does this mean that OTA won't work ? Any way around it ? Because i would like to check now and then that is my version of android the newest one..
Could someone recommend a custom ROM for my Note 10.1 4G (LTE) N8020 4.1.2 because the only one i was able to find was the CyanogenMod (or something) and it basically makes the S-Pen (almost) useless. What i would like is the Omega ROM, but like stated before the installation only supported N8000, N8010 & N8013...
Added screenshot from info.
Thanks anyway
Click to expand...
Click to collapse
How did you switch from CWM to stock? I have having a problem syncing with kies also using omega rom on n8013.
jjndimp said:
How did you switch from CWM to stock? I have having a problem syncing with kies also using omega rom on n8013.
Click to expand...
Click to collapse
I was not easy, i just tried the download mode over and over again with KIES open in windows and somehow it finally did find my device and offered a emergency restore. That is it, and the device was restored to default "original state".
OMG.... one would think after nearly having bricked your device you would either A) stop messing around with it or, B) read and learn more about what you're wanting to achieve and THEN maybe trying something with the ABSOLUTE certainty that a backup to restore is available to you in case of any mishap!
Moral of story :
Don't do anything until you are absolutely sure you have read EVERYTHING about what you are going to do.
For others wanting to mess with their devices, take heed! You may not be as lucky as OP (or troller) whichever is applicable.
There comes a certain point, that when crossed one does not care what happens to the device at hand. After fighting with my n8020 for several days in a row i couldn't care less, and like said before i dont have the level of enhusiasm like i had when i was younger. Of course i know now what went wrong.. But seriously, these are just overpriced toys, so it's not a matter of life and death.
Sent from my GT-N8020 using XDA Premium HD app
Okay. So we all know the d2vzw isn't perfect.
Right?
Mine recently has slowed to a grinding halt. Really nothing worked, the battery lasted maybe 30 minutes of usage (and maybe 10 hours standby), and the boot time was unbearable. So, I decided to try flashing and installing CyanogenMod 12, mainly because I have read that it breathes new life into the phone. But, alas, I am not cut out for this sort of gig alone, as I have discovered.
I come to you all today to ask for some help, or links to help. My recovery mode has been completely messed up, and I don't know what to do.
My questions are: 1. Can I still install a fresh OS, be it CyanogenMod, AOKP, or anything else? 2. How or why?
For more information, here is a timeline of what exactly I did to the phone.
-Bought the GS3
-Owned for ~1.5 years
-Updated to 4.4 KitKat
-Noticed battery life started sucking, as did speed
-Decided to root/flash/install
-Rooted using Towelroot V3
-Tried flashing ClockWork Mod via Odin, but Odin couldn't connect or something. No yellow box.
-Tried flashing CWM via terminal and rebooted into recovery
-Got the message "System Software not authorized by Verizon Wireless has been found on your phone. Please turn off your phone and go to the nearest Verizon Wireless store for help." when entering recovery mode
-Managed to get around that by quickly pressing the volume-up button a few times while booting
-Installed BusyBox
-Got a new Splash Screen that says "Samsung" then at the bottom an unlocked lock that says "Custom"
-Tried using Flashify to flash CWM
-Same error message when booting into recovery
-Tried flashing CWM Touch with Flashify
-Same issue
-Tried using SafeStrap
-Says "Install Successful" but the state still says "Not Installed"
-Tried using EZ-Recovery from Google Play Store
-Didn't work
And that's it so far. The phone works, however recovery mode does not, and I still have all the slow and battery problems.
I have no idea where to go from here.
If you have any more questions, just ask! If you have any suggestions, please let me know!
Thanks!
lordkennedy99 said:
Okay. So we all know the d2vzw isn't perfect.
Right?
Mine recently has slowed to a grinding halt. Really nothing worked, the battery lasted maybe 30 minutes of usage (and maybe 10 hours standby), and the boot time was unbearable. So, I decided to try flashing and installing CyanogenMod 12, mainly because I have read that it breathes new life into the phone. But, alas, I am not cut out for this sort of gig alone, as I have discovered.
I come to you all today to ask for some help, or links to help. My recovery mode has been completely messed up, and I don't know what to do.
My questions are: 1. Can I still install a fresh OS, be it CyanogenMod, AOKP, or anything else? 2. How or why?
For more information, here is a timeline of what exactly I did to the phone.
-Bought the GS3
-Owned for ~1.5 years
-Updated to 4.4 KitKat
-Noticed battery life started sucking, as did speed
-Decided to root/flash/install
-Rooted using Towelroot V3
-Tried flashing ClockWork Mod via Odin, but Odin couldn't connect or something. No yellow box.
-Tried flashing CWM via terminal and rebooted into recovery
-Got the message "System Software not authorized by Verizon Wireless has been found on your phone. Please turn off your phone and go to the nearest Verizon Wireless store for help." when entering recovery mode
-Managed to get around that by quickly pressing the volume-up button a few times while booting
-Installed BusyBox
-Got a new Splash Screen that says "Samsung" then at the bottom an unlocked lock that says "Custom"
-Tried using Flashify to flash CWM
-Same error message when booting into recovery
-Tried flashing CWM Touch with Flashify
-Same issue
-Tried using SafeStrap
-Says "Install Successful" but the state still says "Not Installed"
-Tried using EZ-Recovery from Google Play Store
-Didn't work
And that's it so far. The phone works, however recovery mode does not, and I still have all the slow and battery problems.
I have no idea where to go from here.
If you have any more questions, just ask! If you have any suggestions, please let me know!
Thanks!
Click to expand...
Click to collapse
Well I have bad news, your bootloader is locked if you took the OTA to Kitkat version 4.4.2 NE1. You can't flash custom roms or even a custom recovery (twrp, cwm, philz) your limited to safestrap as a recovery and approx 3 roms that are TW) touchwiz based)
Safestrap should work and your going to be on the lookout for roms in the development section that say BL(bootloader locked) if you have anymore questions feel free to post them
Sent from my Nexus 5
ShapesBlue said:
Well I have bad news, your bootloader is locked if you took the OTA to Kitkat version 4.4.2 NE1. You can't flash custom roms or even a custom recovery (twrp, cwm, philz) your limited to safestrap as a recovery and approx 3 roms that are TW) touchwiz based)
Safestrap should work and your going to be on the lookout for roms in the development section that say BL(bootloader locked) if you have anymore questions feel free to post them
Sent from my Nexus 5
Click to expand...
Click to collapse
That's what I feared. Thank you for letting me know! So, even though it's locked up, can I revert what I did? I still would like to send the phone into Verizon for some trade-in money when I upgrade.
Thanks again!
lordkennedy99 said:
That's what I feared. Thank you for letting me know! So, even though it's locked up, can I revert what I did? I still would like to send the phone into Verizon for some trade-in money when I upgrade.
Thanks again!
Click to expand...
Click to collapse
Yes you can. You can Odin back to that same version which should bring it back to stock kk with the 4.4.2 update
Sent from my Nexus 5
ShapesBlue said:
Yes you can. You can Odin back to that same version which should bring it back to stock kk with the 4.4.2 update
Sent from my Nexus 5
Click to expand...
Click to collapse
Okay, great! Do you know of a place to get the ROM and some instructions for flashing? Also, I couldn't get Odin to connect to my phone. Is there something I need to do before flashing to make it connect correctly?
Thanks!
lordkennedy99 said:
Okay, great! Do you know of a place to get the ROM and some instructions for flashing? Also, I couldn't get Odin to connect to my phone. Is there something I need to do before flashing to make it connect correctly?
Thanks!
Click to expand...
Click to collapse
I do but if it's not connecting to Odin that may be a problem. I've yet to see a device that won't connect to Odin
Sent from my Nexus 5
Hey, so basically I'm in a situation where I have no idea what to do.
I recently just got a new phone, and am going to give my Samsung Galaxy S3, SGH-T999V model - from Wind Mobile to my Dad. Basically, when I first got the phone - a couple months after, I decided to try Rooting it, and I did, successfully. Since I didn't really know what to do with my rooted phone, I decided to unroot it - then tried rooting it again some months later, but it didn't work successfully. Basically my phone wasn't rooted, but I had the "Team-Win" recovery on it.
I wanted to bring my phone back to it's original state - and have the stock recovery on it. After some Googling, my solution seemed to be to flash the stock rom for the SGH-T999V model onto my phone using Odin. And I did that - and it worked successfully. But I still couldn't check for OTA updates or anything, it said my phone had still been modified in an unauthorized way.
Now that I need to give the phone to my Dad, I have to format the device and erase everything. This is where my problem starts. When I try to format it (using the Stock recovery), I see a bunch of error messages, with the Android logo falling down in a kind of dead way. I reboot my device, and nothing changes.
It still has all my data, and everything on it.
Sorry if this is the wrong area to post this (I'm relatively new to the forum), and if my problem doesn't make much sense - I've tried being as detailed as possible. Could anyone help?
Hi, thank you for using XDA Assist. Flashing the stock firmware should show you to get ota's. This should have everything you need,http://forum.xda-developers.com/galaxy-s3/general/samsung-galaxy-s3-sticky-roll-thread-t2344125. Also, you can ask further questions here,http://forum.xda-developers.com/galaxy-s3/help/help-thread-galaxy-s3-question-t2690307
Thread closed
Here's a basic rundown of what happened. I completely rooted my Galaxy S III i535 on 4.4.2, and i installed SafeStrap (A Version of TWRP) since the Verizon S3 has a locked bootloader.
So here's what I tried to do. Using SafeStrap, I backed up my stock rom. And i selected another ROM slot. Using this, i tried experimenting by installing a ROM for another Carrier (They say not to do this, but i have in the past with success, so i thought it mightve worked)
(KEEP IN MIND, THE STOCK OS WAS STILL INSTALLED AND I EVEN HAD A BACKUP)
So, it didnt work and stopped halfway. I rebooted the phone, and Hard bricked.
Doesnt boot up, does not turn on, will not boot recovery or download, or any sign of some boot at all.
And, i get the qhsusb_dload sign on my pc.
Can anyone point me in the right direction, or at least tell me the cause of this problem? Thanks.
CrimsonKatsuro said:
Here's a basic rundown of what happened. I completely rooted my Galaxy S III i535 on 4.4.2, and i installed SafeStrap (A Version of TWRP) since the Verizon S3 has a locked bootloader.
So here's what I tried to do. Using SafeStrap, I backed up my stock rom. And i selected another ROM slot. Using this, i tried experimenting by installing a ROM for another Carrier (They say not to do this, but i have in the past with success, so i thought it mightve worked)
(KEEP IN MIND, THE STOCK OS WAS STILL INSTALLED AND I EVEN HAD A BACKUP)
So, it didnt work and stopped halfway. I rebooted the phone, and Hard bricked.
Doesnt boot up, does not turn on, will not boot recovery or download, or any sign of some boot at all.
And, i get the qhsusb_dload sign on my pc.
Can anyone point me in the right direction, or at least tell me the cause of this problem? Thanks.
Click to expand...
Click to collapse
The solution may be a debrick image. They are designed to boot the phone from an external sdcard and from there reinstall the stock rom/firmware. I haven't searched yet, but check the general and development threads, possibly the stickied summary thread.
Check this thread
Hi folks,
just posting this writeup thinking maybe it might be of help to some people.
Started with a clean S6 Edge straight from Samsung repair for broken screen. Factory wipe, KNOX reset. It had the PD2 update. Tried using Skipsoft's Toolkit and ponied up a donation to get the Pro version with the S6 Edge 6.0.1 update, but it didn't work: it got stuck at the "SEANDROID NOT ENFORCING" screen after flashing TWRP 3.0.2. I know there are issues with 3.0.2, but it's what's optioned in Toolkit now.
Flashing TWRP 2.8.7.0 results in normal boot, but I could not enter recovery mode for some reason. 3.0.0-0 didn't work, either.
What I ended up doing is forcing phone into download mode (Power+Volume Down+Home), ODINing TWRP 3.0.2-1. This resulted in a bootloop (somewhat expected). But I could get into recovery easily. From recovery, I flashed Renegade's PD2-Aroma V3.0 Full ROM via ADB sideload. After a very long first boot, everything works 100%! Root, SuperSU, etc., all taken care of. Hotspot works.
Notes and tips:
- While I didn't use Skipsoft's Toolkit in the end, it's still worth supporting. Might work smoothly using 3.0.2-1 instead of 3.0.2.0, but I'm comfortable with adb/fastboot/etc. so just ended up using that. If you don't already have Android SDK and tools/platform-tools, Skipsoft conveniently includes those commands in its directory under C:\Unified_Android_Toolkit (they're named adb-toolkit and fastboot-toolkit. You can copy and rename them as "adb" and "fastboot" for convenience).
- Make sure you get the right TWRP 3.0.2-1 device version. You want to use twrp-3.0.2-1-zeroltespr.tar.md5 for Sprint S6 Edge. Remove the .md5 part and set it to use the .tar extension (stupid Windows asks you to confirm file extension type change).
- In TWRP you can either push your custom ROM or sideload it. To push a file, move the custom ROM into the same directory you've got adb/fastboot for convenience. Open a terminal window in that directory, and either "adb push customromfilenamehere.zip /sdcard/" or in TWRP, click Advanced/ADB Sideload, and enter "adb sideload customromfilenamehere.zip".
- If you're sideloading it, it's gonna take a while, and will start flashing even while the transfer percentage is creeping up. Example: at around 9%, it started AROMA, around 14%, it went through some of the installation options. It was done flashing everything and ready for reboot even though the terminal window said only 76% was transferred. That's ok. Click "finish" in AROMA on phone, reboot. Unplug phone. Wait a long time for first boot (this took around 20 minutes for me). ENJOY.
Remember: all is not lost as long as you can get into download mode! Power-Volume Down-Home until you get to screen prompting to get to download mode. Volume up to select that mode. You can ODIN from here.
Additionally: if you find yourself for whatever reason stuck at the initial S6 Edge boot screen with "SEANDROID NOT ENFORCING," you might be in some kinda of boot limbo. I was able to issue some adb commands here, even with recovery was borked and the phone didn't boot all the way. Doing an "adb reboot-bootloader" would let me do a complete boot to ROM while I was trying to get the different TWRP versions working (until 3.0.2-1).
Hope this helps someone.
tl;dr: For PD2/6.0.1 Sprint S6 Edge, manual flash TWRP 3.0.2-1. Push custom ROM through Recovery. Reboot, wait a long time. Success!
Just to Clarify (and mostly for myself), I think this is the simplest and most foolproof way to get yourself fully update and on a custom rom with root.
1. ODIN Stock PD2 Image. Reboot, make sure dev options + USB debugging is enabled.
2. ODIN latest TWRP 3.0.2.1 - HERE.
3. Obtain root by going into TWRP immediately after you install it and flashing the root kernel Ram did for this device - HERE
4. Then after wiping cache, dalvik and data in TWRP, flash Renegade ROM 3.0 PD2.
Using CFauto root method is known to cause issues. This is the type of approach I took and it was flawless. The initial boot of the Renegade ROM can seriously take like 20min though, I thought I was looping for a second.
If anyone disagrees with this method or sees where it can be done better, please advise. This seems to prevent the instance of any loops or issues. The Renegade ROM has a rooted kernel so flashing the root kernel is likely a redundant step. You could omit Step 3 if you are flashing a custom ROM, probably, but it seems to prevent any hangups. But if you plan to stay stock, you still have to flash a rooted kernel after TWRP.
Alpine- said:
Just to Clarify (and mostly for myself), I think this is the simplest and most foolproof way to get yourself fully update and on a custom rom with root.
1. ODIN Stock PD2 Image. Reboot, make sure dev options + USB debugging is enabled.
2. ODIN Ram's TWRP 3.0.2 - HERE I'm assuming the other guy's 3.0.2 works fine too, I am not sure why you hung and had to revert to a 2.x TWRP build.
3. Obtain root by going into TWRP immediately after you install it and flashing the root kernel Ram did for this device - HERE
4. Then after wiping cache, dalvik and data in TWRP, flash Renegade ROM 3.0 PD2.
Using CFauto root method is known to cause issues. This is the type of approach I took and it was flawless. The initial boot of the Renegade ROM can seriously take like 20min though, I thought I was looping for a second.
If anyone disagrees with this method or sees where it can be done better, please advise. This seems to prevent the instance of any loops or issues. The Renegade ROM has a rooted kernel so flashing the root kernel is likely a redundant step. You could omit Step 3 if you are flashing a custom ROM, probably, but it seems to prevent any hangups. But if you plan to stay stock, you still have to flash a rooted kernel after TWRP.
Click to expand...
Click to collapse
I noticed chainfire now has a CF-autoroot for the 925P 6.01 and people were having success using the one for the 925F. Any verification on this? Haven't seen anyone on this forum say anything about it. I just bought a new S6 edge for sprint. I always am about year behind on phones because of the high cost of the latest and greatest. I picked the edge because my wife has had one a year and it gets a lot better reception than my N5. But, I gots to have root and don't wanna screw up a new phone. I know the first thing I need to do is check which software it's running. Should I do this before I activate it or can i stop any system upgrades before they install?
baknblack said:
I noticed chainfire now has a CF-autoroot for the 925P 6.01 and people were having success using the one for the 925F. Any verification on this? Haven't seen anyone on this forum say anything about it. I just bought a new S6 edge for sprint. I always am about year behind on phones because of the high cost of the latest and greatest. I picked the edge because my wife has had one a year and it gets a lot better reception than my N5. But, I gots to have root and don't wanna screw up a new phone. I know the first thing I need to do is check which software it's running. Should I do this before I activate it or can i stop any system upgrades before they install?
Click to expand...
Click to collapse
I have not attempted to use CF-autoroot just because of reported issues and the general recommendation being to use the standard method. It may work fine now that its been updated, but I have not personally tested it.
Alpine- said:
I have not attempted to use CF-autoroot just because of reported issues and the general recommendation being to use the standard method. It may work fine now that its been updated, but I have not personally tested it.
Click to expand...
Click to collapse
I just bought my phone new off ebay it updated to PF4 just as soon as I activated it. I couldn't stop it. Anyway I used the CF autoroot on it and it worked perfectly. I tried to do it manually a couple times first and never could get TWRP to flash. It would say it was successful but, stock recovery stayed. Anyways, I got er done and running Renegade wich btw is an awesome ROM. This is my first samsung device and had I done a bit more research I'd of known the majority of development is on the regular S6. I just picked the edge because my wife has one and it worked so much better in the boonies than my N5 did.
baknblack said:
I just bought my phone new off ebay it updated to PF4 just as soon as I activated it. I couldn't stop it. Anyway I used the CF autoroot on it and it worked perfectly. I tried to do it manually a couple times first and never could get TWRP to flash. It would say it was successful but, stock recovery stayed. Anyways, I got er done and running Renegade wich btw is an awesome ROM. This is my first samsung device and had I done a bit more research I'd of known the majority of development is on the regular S6. I just picked the edge because my wife has one and it worked so much better in the boonies than my N5 did.
Click to expand...
Click to collapse
Edge is better imo, certainly looks better. All you need is Renegade rom anyway. May be a few more roms in active dev for s6 but nothing better per se. Renegade rom dev is alive and well.
Would these root methods trip knox?
chen69chuck said:
Would these root methods trip knox?
Click to expand...
Click to collapse
Yes
Thanks.
Working for g920v 6.0.1?
freaking thank you been struggling with twrp on and off for two days trying to bring this phone back from the dead! YOU the man