Related
Good Evening
I downloaded a PTT fix from http://www.howardforums.com/archive/topic/1054343-1.html & installed the .cab file. It created a button 5 option in my settings/buttons menu. However, when I set that option for camera instead of PTT...it still initializes the PTT vs the camera. I'm going to assume that the PTT is not button 5 on the fuze, hence why it won't work. Does anyone know which button that it might be, and how i could edit that file? or make my own work around?
Thanks
The PTT might be hard wired to the PTT hardware needed for ATT's push to talk, kinda silly really I don't see why they still push this I've yet to meet anyone on ATT who uses this feature, maybe one day ill run into a cunstruction worker who knows.
TazMan1688 said:
Good Evening
I downloaded a PTT fix from http://www.howardforums.com/archive/topic/1054343-1.html & installed the .cab file. It created a button 5 option in my settings/buttons menu. However, when I set that option for camera instead of PTT...it still initializes the PTT vs the camera. I'm going to assume that the PTT is not button 5 on the fuze, hence why it won't work. Does anyone know which button that it might be, and how i could edit that file? or make my own work around?
Thanks
Click to expand...
Click to collapse
I'd love to see a solution to this too. I tried the Tilt registry hacks that let you re-map the PTT button but all that did was disable the button completely. (Which is still an improvement because at least now I don't have the PTT message come up every time I accidentally hit that button...)
Black93300ZX said:
CONFIRMED, this is how to keep that annoying PTT message from coming up on American Touch Pro's (Fuze maybe? whatever).
Keep in mind, you can't individually map this button with this method, that may come later.
Step 1: Registry editor, remove HKLM/Services/PTT
Step 2: Create a key in HKLM/Software/Microsoft/Shell/Keys called "40C2"
Step 3: Create a string within that key, titled Name with the value being "Button 6" or whatever
Step 4: Soft reset.
From this point on you can remove 40C2, but your PTT button will simply perform with a press what your send button performs with a hold (which can be remapped easily... Settings/Buttons/Button1(Hold)).
Click to expand...
Click to collapse
10 chars..
I were to remove that string after i install the .cab, would that disable PTT,and the settings menu take over?
I realize I can do a registry hack, but I was looking for something that A) would be easy to install/uninstall B) would add an easily accessible option to the settings on the phone.
TazMan1688 said:
I were to remove that string after i install the .cab, would that disable PTT,and the settings menu take over?
I realize I can do a registry hack, but I was looking for something that A) would be easy to install/uninstall B) would add an easily accessible option to the settings on the phone.
Click to expand...
Click to collapse
Um that is the easiest way right now.
And it does as B). Just change what Button 1 (Hold) to whatever you want and that's what your PTT button will act as.
Alright, its Button 1...awesome. Now lets see if I can find that setting ;-)
In settings/personal/buttons
...there is only an option for button 5, and button 5(hold). 1-4 do not show up there. How would I go about editing button 1's action?
Thanks alot
I found a program called AE BUTTON PLUS, it allows you to map any hardware button on the device. The PTT button is not listed by default so you need to "add button" it will then ask you to press the hardware button you would like to map, after that it shows up on the list and you can map it... I have found that adjusting long press setting causes issues, but tap and double tap work fine. I have tap disabled since I always hit the key by accident, double tap is Torch. Working fine so far. I believe you can even map individual keys on the keyboard in the same way.
I tried to use AE Button Plus(registered it), and had no luck creating an action for the PTT button. So I followed the registry ediit intructions, again..with no avail.
My PTT is disabled, which as previously stated, is better than nothing.
I would like to clarify two things. Does 40C6, and 40C7 relate to PTT on all devices, or is this a phone by phone basis? 40C6 could be PTT on a tilt, but the touch may be 33D4. Noobish question, but I'm not sure how this stuff works.
Also you said its "Button 1". Again, does this refer to hardware button # 1. Or is this just a random name we give it so we know which one to edit in the buttons menu?
So if I use 40c6, and 40c7 for "Button 1", and "Button 1(hold)"...it should work?
...I also used Button 6 & Button 6 hold as in the Tilt instructions. Same function.
I appreciate the assistance gang!
any1 have any luck?
If you want to remap the PTT button using a cab file (instead of manually doing reg tweaks) just look here: http://www.fuzemobility.com/ptt-remapping-revisited-application/
pretty simple but read the 'update' at the end
Before I start, I apologise if this has already been answered elsewhere, as I've spent about five hours trawling through threads looking, in vain, for a solution.
I have bought a new Fuze but the PTT button causes a problem with the aluminium case I bought for it. The problem is that the case is for a Touch Pro and the latch is right where the PTT button is (meaning the button is permanently depressed when the case is closed). It cannot be remapped in Settings/Buttons.
All I want to do is to be able to disable the button completely, or failing that make it an 'OK/Close' button. I have got rid of the PTT link but would greatly, greatly appreciate if someone could tell me what commands should be written in "short_PTT.lnk" and "long_PTT.lnk" to be able to do this. I've tried just leaving both blank but then the PTT button brings up an error message when pressed about not being able to find the shortcut.
Is there a way to achieve either of these solely using the registry, and without using third-party software?
Thanks for your time.
Here's full instructions on remapping your PTT button: http://www.fuzemobility.com/?p=598
To just disable it so it does nothing follow the steps at the beginning:
Using a registry editor delete HKLM\Services\PTT.
Next delete HKCU\Software\HTC\PTT.
Navigate back to the Windows directory and rename PTT to PTT2
Now create a new folder called PTT and set the properties as System and Read Only
If you follow all of those instructions and want to map it to close use this app and map it: http://www.fuzemobility.com/?p=1249
Problem fixed
You're a great person, bugsykoosh. I had done the first part you suggested, but the second link - and use of a tiny program called Zap It - fixed it perfectly.
Thank you heaps.
Okay so what is the joke why does this work for EVERYONE, except me. I mean seriously. I followed the steps but nothing. I press the button and I get nothing at all except the noise that indicates the keypress was succesfull WHAT GIVES.
bugsykoosh said:
To just disable it so it does nothing follow the steps at the beginning:
Using a registry editor delete HKLM\Services\PTT.
Next delete HKCU\Software\HTC\PTT.
Navigate back to the Windows directory and rename PTT to PTT2
Now create a new folder called PTT and set the properties as System and Read Only
Click to expand...
Click to collapse
This is overkill. You don't need to mess around with the PTT directory. If you just stop the PTT service from running, nothing will look in the PTT directory and its contents don't matter.
Just change HKLM\Services\PTT\Dll to an empty string and soft reset. The button will be completely inert. You can then remap it using AEBP or the short_PTT/long_PTT shortcuts, if you choose, or just leave it inactive.
Today
WMM,
If you change as you suggested, it looks like the long and short still work. I've remapped and did all the steps, but it looks like yours may be a little easier/cleaner. I'm curious, and I've looked extensively to no answer, but if I want the short press to just send my Fuze back to "Today" (in TF3D), is there a way to do that? If I press Start the first option is Today and this does exactly what I want. There's no shortcut that I can locate anywhere (and I'm sure it's my ignorance/technical inability) and the next step is to make a copy of that shortcut and name it short_PTT which I can handle. Any suggestions?
So, it isn't possible to map the PTT button from the Settings - Buttons screen? Looks like the method linked to above, with the short_PTT and long_PTT shortcuts, won't allow me to map the PTT buttons to work as the left and right softkeys.
As far as I know (which isn't very far, sometimes), the only way to get the PTT button to execute "Home" or the left/right soft keys is to use AE Button Plus. There may be applications that do those things that you can download (I know there are for things like toggling wifi and bluetooth, killing the current application, etc.) -- these are really tiny utility applications that are specifically intended for mapping to a button -- but I don't know of ones that do those particular things. (AEBP is able to do all those things, as well as giving you four mappable events -- single, double, triple, and long press).
okay seriously here do the links need to have special settings or anything. I mean what attributes should they have. Nothing works!
For the life of me, I can't remap my PTT button.
On a short press, it activates the voice command system.
On a long press, it activates the camera.
This seems to be from flashing NATF's ROM.
Following instructions above, I have no HKLM\Services\PTT or HKCU\Software\HTC\PTT in my registry editor.
I did the short and long_PTT/link and PTT folder in Windows. The links work there, but doesn't change what happens when the button is pushed.
I have AEButton Plus, but can't get it to add the PTT as a button.
Any suggestions where I can find in the registry what is making my PTT button act as it is? I'd rather have it do nothing than what it is doing now.
Thanks,
Chris
txemsdoc said:
On a short press, it activates the voice command system.
On a long press, it activates the camera.
This seems to be from flashing NATF's ROM.
Following instructions above, I have no HKLM\Services\PTT or HKCU\Software\HTC\PTT in my registry editor.
I did the short and long_PTT/link and PTT folder in Windows.
Click to expand...
Click to collapse
Yes, I believe NATF did not add the PTT stuff from AT&T into his ROM; the instructions above are for the stock AT&T ROM. You'll have to ask NATF how to remap the PTT button using his ROM.
jro2020 said:
okay seriously here do the links need to have special settings or anything. I mean what attributes should they have. Nothing works!
Click to expand...
Click to collapse
I'm not sure what you're talking about here. As I mentioned in my last posting just above this one, this probably only works in a ROM that supports PTT, like the stock AT&T ROM; if you're running something that doesn't support PTT, it would be a real surprise if "short_PTT" and "long_PTT" meant anything special, no? Assuming you are running the stock AT&T ROM, here's a step-by-step procedure for creating the short_PTT link to point to the Camera application using the built-in File Explorer.
1) Open File Explorer. If the drop-down box at the upper left says anything other than "My Device," tap the small down-arrow next to the label and then tap on "My Device."
2) Tap on "Windows" and wait a few seconds for the folder contents to appear.
3) Scroll down until you see "Camera" (the one that's 794K). Tap and hold that until the pop-up menu appears and then tap on "Copy".
4) Tap on "Menu" in the lower right, then "Edit", then "Paste Shortcut".
5) Scroll to the very bottom of the folder contents and you'll see "Shortcut to Camera" that was created. (The name may be truncated, depending on the size of the font and the screen orientation. Mine says, "Shortcut to Ca..." in portrait orientation. In any event, it will be the last thing in the folder contents.) Tap and hold on that until the pop-up menu appears and then tap "Rename". Then just type "short_PTT" to overwrite the existing name and hit return.
That's all you need to do. (If the application you want to run with the PTT button is in a different folder from \Windows, navigate there, tap-hold on the application executable, and select "Copy". Then navigate to \Windows and do steps 4 and 5 exactly as above.) This works exactly the same for the "long_PTT" shortcut.
If you do exactly that, does it not work? What happens if you tap the "short_PTT" shortcut in File Explorer? Does it start the camera?
Here is a link to a cab that will allow you to remap the PTT button: http://www.fuzemobility.com/ptt-remapping-revisited-application/
Remap PTT to launch phone Speed Dial?
I have disabled PTT so that I can use the button to launch programs - I just dont know how to launch phone speed dial - Does anyone know if there is a file that will launch speed dial that I can use to link to the PTT button?
Thanks!
pdafish said:
I have disabled PTT so that I can use the button to launch programs - I just dont know how to launch phone speed dial - Does anyone know if there is a file that will launch speed dial that I can use to link to the PTT button?
Thanks!
Click to expand...
Click to collapse
if your goal is to map your PTT button to call a single person check this posting: http://www.mobilitydigest.com/forums/showthread.php?p=3635
Here is another source that gives you step by step instructions.
http://htcblogger.com/2009/06/07/ho...utton-on-your-att-fuze-htc-diamond-touch-pro/
Note that if you're using the stock Fuze ROMs, the updated ROM from HTC adds the ability to remap the PTT button without any registry hacks.
PerfAlbion said:
Note that if you're using the stock Fuze ROMs, the updated ROM from HTC adds the ability to remap the PTT button without any registry hacks.
Click to expand...
Click to collapse
Can you post instructions as to how? I tried it already and the pulldown that shows you the available apps you can pick only shows PTT.
Best regards,
JD
So I followed the registry edit method, and created a file (not a folder) called PTT and things work great .... except ... when its on Airplane mode (Phone, Bluetooth and Data set to off) and I press the button (short or long) the PTT function kick off.
Is anyone else experiencing this?
Anyway to change this behaviour?
jdomi99 said:
Can you post instructions as to how? I tried it already and the pulldown that shows you the available apps you can pick only shows PTT.
Click to expand...
Click to collapse
Something's odd with your phone, then. Mine shows the full list of apps and options. I remapped PTT to VC without an issue.
Is it possible that you've got an application that's taking over the Buttons Control Panel? On mine, I had to remember to shut off SPB Pocket Plus's control over the buttons since it doesn't work with the Touch Pro line. When I first fired up the control panel, it listed no apps until I remembered that I had Pocket Plus running and turned of that feature.
Sorry if this has been asked but i can't see anything on it anywhere so here goes!
Is there any way that can be disabled? Personally, if i want to have the handset locked so the touchscreen can't be activated in any way, i just hit the power button!
Thanks in advance if you can help, TSS
Disable lockscreen:
Start menu: Open File explorer, then navigate to Device\windows\Startup\
and move or delete "autokeylock". Soft reset.
(It's for UK rom, so it's different with other language).
LeTo08 said:
Disable lockscreen:
Start menu: Open File explorer, then navigate to Device\windows\Startup\
and move or delete "autokeylock". Soft reset.
(It's for UK rom, so it's different with other language).
Click to expand...
Click to collapse
Thanks ever so much... that works a treat. Now all i have to do is work out what this stupid error message that it keeps showing is all about. Anyone else had it? Asks you to send or not send? If i get the thing show again, i'll post the part it refers to
Hi everyone
Is there a way to create a shortcut to DEVICE LOCK? I'd like to put a shortcut as a quick launch but I've searched the whole device and don't seem to see an actual executable to launch the lock screen. Is this possible at all somehow?
Thanks very much in advance for the advice!
I know this may not be what you are after,
however, if i put my device into standby (short press hang up key) it locks the device
also im not sure if it is ROM specific but on Miri 15.1 if you enter the start menu there is a lock icon on the bottom left...
Sorry if i couldnt help
VeEuzUKY said:
Hi everyone
Is there a way to create a shortcut to DEVICE LOCK? I'd like to put a shortcut as a quick launch but I've searched the whole device and don't seem to see an actual executable to launch the lock screen. Is this possible at all somehow?
Thanks very much in advance for the advice!
Click to expand...
Click to collapse
I've got the Left SoftKey on the Homescreen set as "Lock" which simply links to a lockscreen.exe program. So from the home screen I just press Lock, instead of using the "Start Menu/Lock" option.
If you want to configure something like this drop the Lockscreen.exe into the Windows folder and then configure the Left SoftKey to point to it.
Alternatively, you could add it as a QuickLaunch link if you prefer that for some reason.
madstyle69 said:
I've got the Left SoftKey on the Homescreen set as "Lock" which simply links to a lockscreen.exe program. So from the home screen I just press Lock, instead of using the "Start Menu/Lock" option.
If you want to configure something like this drop the Lockscreen.exe into the Windows folder and then configure the Left SoftKey to point to it.
Alternatively, you could add it as a QuickLaunch link if you prefer that for some reason.
Click to expand...
Click to collapse
Ahhhhh, thanks a million, I think it will do the trick since its an executable I can create a shortcut to. This is great, thanks agin, will try it right now
You may also want to look at this app from the forum... it also includes data on/off, power off, etc...
http://forum.xda-developers.com/showthread.php?t=601203&highlight=hd2+connections
madstyle69 said:
and then configure the Left SoftKey to point to it.
Click to expand...
Click to collapse
Ok, and exactly HOW do you do that?
madstyle69 said:
I've got the Left SoftKey on the Homescreen set as "Lock" which simply links to a lockscreen.exe program. So from the home screen I just press Lock, instead of using the "Start Menu/Lock" option.
If you want to configure something like this drop the Lockscreen.exe into the Windows folder and then configure the Left SoftKey to point to it.
Alternatively, you could add it as a QuickLaunch link if you prefer that for some reason.
Click to expand...
Click to collapse
I am using S2U2, http://forum.xda-developers.com/showthread.php?t=668415 as my choice of lockscreen. It has settings that allow one to lock the screen when it goes blank/black.
So when I press the End/Power On button i.e. the extreme right button, it blanks the screen and S2U2 will kick in in the background.
For the left hand button, I have assigned it for rotating the screen to landscape.
Halle said:
Ok, and exactly HOW do you do that?
Click to expand...
Click to collapse
To set the Lock (or any Link) as the Left Soft-Key on the Homescreen, change the following key in the Registry:
HKCU\Software\Microsoft\Today\Keys\112
Default: Lock
Open: \Windows\Start Menu\Programs\Tools\LockScreen.lnk
(or wherever you have the Link)
You could also use the Cookie home tab app. Besides the many other options it provides, you can add a lock screen button on the main screen and even modify your actual lockscreen.
rexboy said:
You could also use the Cookie home tab app. Besides the many other options it provides, you can add a lock screen button on the main screen and even modify your actual lockscreen.
Click to expand...
Click to collapse
I know this and have used it a lot. Not anymore though, since I don't really need it.
mad_style said:
To set the Lock (or any Link) as the Left Soft-Key on the Homescreen, change the following key in the Registry:
HKCU\Software\Microsoft\Today\Keys\112
Default: Lock
Open: \Windows\Start Menu\Programs\Tools\LockScreen.lnk
(or wherever you have the Link)
Click to expand...
Click to collapse
Nice, but I have no "\Keys\112" in there. I looked with Resco Registry. Thanks anyway!
+1 for S2U2
In the button options, you can select what each hardware button actually does. I'd like to set google now (the thing where cards appear with info on things that might interest you, not the launcher) to start when I double tap the home button, but I can't seem to find it anywhere. Does anyone know how I could achieve this?
Hopefully I missed a setting somewhere and will feel really silly a few posts in, but thanks in advance!
Go to Settings -> Buttons -> Hardware button
Check Enable custom actions and then set double tap for menu as the Google app
Ah, there we go, thank you! I don't understand why they didn't call it google now or something though.
Ps. I was right and feel totally silly now.