Database Info

[Q] Samsung Galaxy note GT N7000 not booting

Hello every one on this forum, I need your help regarding my Samsung Galaxy note GT N7000, I woke up yesterday to find out that my phone need some update and i press ok and I went to the bathroom to get ready for work and by the time i came back my phone as stop working completely and I tried to reboot it but to no avail, I need your help pls.
Thanks

were you on gingerbread and what about root? any custom rom? can you still get into recovery? Or did you have clockwork mod? i wonder if it was upgrading to ICS and your phone died? Just some things that might help narrow down a bit.

Galaxy Note not booting after firmware update
Hi,
The same thing happened to me today. My phone indicated that an update was required. When I proceeded to install, the phone is stuck at the SAMSUNG logo.
My phone is not rooted. About a few weeks ago I had upgraded from GB to ICS.
Any help would be much appreciated. Thanks!

Facing the same problem
Hi all,
I am facing the same problem since this morning. I have not rooted my phone. Recently I upgraded my Galaxy Note from Gingerbread to ICS 4.0.3. This morning, I upgraded the firmware, as I had done this in the past as well, I didn't think it may lead to any problem. But since then, the phone starts and shows Samsung prompt. Is it because of any bug in the latest update? Does anyone know what to do in this situation?

I am facing the same problem, the Samsung logo keeps glowing off and on after the boot chime plays.
Does any one have any clue about this? I think its happening to India users who got this update.
Edit: I am unable to go into the recovery screen as well. The green droid shows, some loading happens(tries to?) in the bar below and the screen turns off and if I keep holding the buttons the same cycle repeats. Leaving them at any point leads to the Samsung glowing logo and no boot!

Another one bites the dust
Faced the same problem yesterday...running around to get my contactsrescued...even the authorized service centres are only assuring flashing it -0 as if it is a big obligation
Need someone to access dram... jtag to a usb mode...going to try at heera panna & manish market tomoro - both in Mumbai
Lts c
If anyone can help - kindly upload post

Found the solution!!!
Hi Guys, I've found the solution.
Edit: Since, I received queries from many people, I would like to know from the advanced/experienced members if the solution I am suggesting is absolutely right or not, and if it could lead to any problem. My phone is working fine, I haven't lost any data.
The solution:
1. Download the stable ICS version released in May.
2. Install it manually using the ODIN settings.
Guys, please help us out, let us know your opinion.

add me to list
using just the stock rom
this update flashed on the notification and after installation doesnt go beyond the
boot screen
Note , India

[Q] Help please!

With the release of Android 4.4 coming, I'm thinking of flashing the latest Cyanogen rom. But, this is my first time owning an Android phone, or any smart phone at all. So I was wondering:
Can I upgrade my Samsung Galaxy S2 SPH-D710BST to the latest version?
If so will I have to reinstall my apps and etc.?
If I use custom firmware can I still activate and use my phone to call? (This is all assuming I still haven't gotten around to activating my phone)
If so will i have to use Boost Mobile to activate my phone? (As indicated by the model number)
Thanks in advance for any advice!

ShikiSatsu said:
With the release of Android 4.4 coming, I'm thinking of flashing the latest Cyanogen rom. But, this is my first time owning an Android phone, or any smart phone at all. So I was wondering:
Can I upgrade my Samsung Galaxy S2 SPH-D710BST to the latest version?
If so will I have to reinstall my apps and etc.?
If I use custom firmware can I still activate and use my phone to call? (This is all assuming I still haven't gotten around to activating my phone)
If so will i have to use Boost Mobile to activate my phone? (As indicated by the model number)
Thanks in advance for any advice!
Click to expand...
Click to collapse
hey there, welcome to the world of android friend! so if you were to have cm 10.2 (android 4.3) on your device and decide when a stable version of 4.4 comes out you want to flash it, you will have to reinstall all your apps, if you were to come from android 4.1 to 4.2 you wouldnt have to reinstall them. android 4.1-4.3 dont have very much changes, just a little of ui change and hardware changes to use left memory. now to see if your galaxy s2 will get 4.4? nobody will know, i dont think anybody knows if cyangenmod will make more roms, they recently annouced something that sounded like they were making their own android handset. if you use custom firmware, yes you can still use it as your phone and activate it, im sure not allot of people would flash roms to not be able to use their phones . i looked up the model number and it looks like the carrier is boost mobile. hope you figure out what you want man, please if you have any questions i would love to answer them, i love to see the notification numbers go up xD

Thanks! I already knew my phone was from Boost, I was just asking if activating it with them was a MUST. Also my phone has that manufacturer's error with the dropping cell signal repeatedly activating the menu. I tried the fix where you clear the cache partition, but that was only a temporary fix.
So, to fix the phone I have to get it repaired at a Sprint?
If so, how much?
Or, alternatively, could re-imaging the phone with a new "OS" fix it? (Only asking since the cache wipe worked for a while.)

[Completed] Galaxy Note 2 Sprint SPH L900 Issues

Hello All,
Today I tried to update to the most recent snapshot for cm11 and now my phone is totally pooping bricks lol. I tried almost everything i could in my book. I re flashed Recovered Re partitioned factory reset re downloaded then re flashed and still nothing i just keep getting errors. I was wondering if anyone knows any way to Go back to complete factory stock so i can return it and get a Galaxy note 3 or maybe an s5 I'm not sure yet but for the next couple weeks i really need a working phone so any help would be appreciated.
Thanks,
Tom

tclementi1 said:
Hello All,
Today I tried to update to the most recent snapshot for cm11 and now my phone is totally pooping bricks lol. I tried almost everything i could in my book. I re flashed Recovered Re partitioned factory reset re downloaded then re flashed and still nothing i just keep getting errors. I was wondering if anyone knows any way to Go back to complete factory stock so i can return it and get a Galaxy note 3 or maybe an s5 I'm not sure yet but for the next couple weeks i really need a working phone so any help would be appreciated.
Thanks,
Tom
Click to expand...
Click to collapse
Have a look here > [ROM][ODIN]SPH-L900 MK4 (MK4 Modem/Kernel/Bootloader/ROM - Full Restore - Unrooted).
If you have any further questions or still need help, please ask in Sprint Galaxy Note II Q&A, Help & Troubleshooting.
There you should get quickest and best help.

Ive broken my Note 2 (ROM upgrade gone wrong).

Hi Everyone,
I come to you for a bit of help. I have spent a long time trying to fix this and come for help from you guys.
So I got a little bored with standard Samsung Android on my Note 2 (GT-N7100). Having used Cyanogen before, I decided to try it on the note.
I rooted the device and installed CWM on it no problems. I then loaded CM from a micro usb.
On reboot it just gets what i'd call the "Spinning blue screen of death" where it just has the big blue circle going round until it runs out of battery. After some research I used CWM to clean out the caches etc but it still didn't appear to work. This was using the stable version for my Note 2. I then went on to try other versions and got the same issues. Alas, trying to do a restore didn't work either, as it didn't seem to have all the files.
At this point I am happy to go back to stock Android or indeed CM. I'd just like a phone that works!
My device details:
Model GT-N7100
SSN: -N7100GSMH
Network Provider Virgin UK
Any help appreciated.

Samsung Galaxy Tab 2 7.0 P3113

As in the title states I have the galaxy tab 2 7.0 and recently I installed CWM and a ROM and everything looked like it went right however after I reloaded my tablet nothing seems different it jus seems to return to stock setting and now I cant do the OTA software update which means now certain apps and games I can no longer uses as it says my device isnt compatible. My goal was to simple update from Jellybean to at Least Kitkat.
Can someone help me. where did I go wrong?

Fleacore210 said:
As in the title states I have the galaxy tab 2 7.0 and recently I installed CWM and a ROM and everything looked like it went right however after I reloaded my tablet nothing seems different it jus seems to return to stock setting and now I cant do the OTA software update which means now certain apps and games I can no longer uses as it says my device isnt compatible. My goal was to simple update from Jellybean to at Least Kitkat.
Can someone help me. where did I go wrong?
Click to expand...
Click to collapse
Go to sammobile and flash the latest stock firmware for your device .

Newyork! said:
Go to sammobile and flash the latest stock firmware for your device .
Click to expand...
Click to collapse
Well after a short research I found a ROM called Resurrection Remix, loaded with 5.0.2 (or Lollipop) however now everything is force closing and I barely got my laptop to see it as MTP again after installing a new Binary (glad that did that trick for that) but I cant get it to boot into CWM Recovery bc I cant access the app the only thing it will let me do right now is change the Binary.
How can I fix this issue?
Edit: Okay so I got that solved with doing a factory reset twice, booted in CWM, loaded up the GApps. Now just wondering if there is away to make it not seen with phone options like the dialer or msgs as its jus a plan old tablet, doesnt take a sim card and has no carrier. I do have the source code but I am not tweaking that til I get a better understanding of it.

After a lot of research and tries (amazingly without bricking) I am now running an even newer version of a CM 13 Marshmellow