Ok, Ive unlocked my bootloader, installed CWM, rooted my device and checked that it worked, and when I go to the boot loader and select recovery it takes me to CWM. Ive made backups from it and and they restore fine. I even installed a custom kernel and it worked because noFrills let me OC/choose a different governor. Yet from the three ROMs Ive tried so far, they install fine, no errors from CWM, but when I boot up it just gets stuck booting forever. Ive tried wiping everything, Ive tried wiping some things, heck I even tried wiping nothing but I still get the same issue. Id really like to try a new ROM now that I went through the trouble of voiding my warranty, so please try to help me. Thanks in advance, alexbenh
Same here
Gonna try out this guy's method real quick except with CWM
http://forum.xda-developers.com/showpost.php?p=49668571&postcount=5
I know this seems obvious, but are the ROMs you are flashing specific for your device?
Sent from my ST18i using xda app-developers app
yes, I have the Moto G XT1034 and have flashed ROMs before on my old galaxy exhibit and never had any trouble with that
Join the club, same here, done everything right but no custom rom joy for me
Sent from my XT1032 using XDA Premium 4 mobile app
If you're flashing a kitkat ROM, make sure you're already running KitKat. If you're still on 4.3, then fastboot flash the stock 4.4.2 image first, then try custom roms
Sent from my XT1034 using Tapatalk
WOOOHOOO, I reinstalled the stock 4.4 firmware and everything, I couldnt root it with superboot so I just skipped the rooting step. Then I flashed CWM through the bootloader although I decided to take a risk and instead of "fastboot flash recovery recovery.img", I did "mfastboot flash recovery recovery.img" just to see if it would change anything. Not sure if thats why it works for me now, but its worth a try. Good luck to the rest of you who have this problem.
lowrider262 said:
If you're flashing a kitkat ROM, make sure you're already running KitKat. If you're still on 4.3, then fastboot flash the stock 4.4.2 image first, then try custom roms
Sent from my XT1034 using Tapatalk
Click to expand...
Click to collapse
Yes, I was already running the stock 4.4 ROM the only differences was that I had a custom kernel which could possibly be an issue, but I wouldnt think so
http://forum.xda-developers.com/showthread.php?t=2620060&page=2
BBOXPT said:
http://forum.xda-developers.com/showthread.php?t=2620060&page=2
Click to expand...
Click to collapse
huh, I had not tried using TWRP, but I thought CWM had a fix permissions command as well.
alexbenh said:
huh, I had not tried using TWRP, but I thought CWM had a fix permissions command as well.
Click to expand...
Click to collapse
My experience. I tried CWM then loaded a Rom, the first one I tried being CM11 = Bootloop, Then I tried several other Rom's and always the same result, spinning on Bootloop
I then put the phone back to stock firmware 4.4.2 and tried TWRP version TWRP2630, no joy even the bootloader wouldn't work right.
Finally put the phone back to stock AGAIN (now getting frustrated!) and tried installing TWRP2631 using fastboot. That did the trick, now all ROM's load and run fine. This version of TWRP appears to be working well. Backup/restore works, and no problems at all.
Other's report CWM works well, but not for me unfortunately.
Related
Hi guys,
3 days ago I had root but softbricked by installing hyperdrive when "I thought" I unlocked via ez-unlock but I guess that didn't take. Tried to restore back to stock but couldn't, I lost access to CWM and Odin nor Heimdall (Mac, Linux and Windows) didn't like my phone in 3 computers using 3 different cables.
But from continuous failed/incomplete/partial flashes, CWM is miraculously back! So that's like my only glimmer of hope right now. So my question is could I get back to stock or any rom from flashing something from CWM? Could I get ANY kind of ROM running again, could I root again, unlock bootloader and install new rom via CWM.. Basically can I fix my phone from CWM? Or is the only way back to any rom is via stock via Odin/Heimdall?
PLEASE HELP.
ojpd said:
Hi guys,
3 days ago I had root but softbricked by installing hyperdrive when "I thought" I unlocked via ez-unlock but I guess that didn't take. Tried to restore back to stock but couldn't, I lost access to CWM and Odin nor Heimdall (Mac, Linux and Windows) didn't like my phone in 3 computers using 3 different cables.
But from continuous failed/incomplete/partial flashes, CWM is miraculously back! So that's like my only glimmer of hope right now. So my question is could I get back to stock or any rom from flashing something from CWM? Could I get ANY kind of ROM running again, could I root again, unlock bootloader and install new rom via CWM.. Basically can I fix my phone from CWM? Or is the only way back to any rom is via stock via Odin/Heimdall?
PLEASE HELP.
Click to expand...
Click to collapse
So confusing....
Ok, so you're on a stock rom right now and you have cwm installed? You must have some type of root enabled, do you have supersu or superuser installed? If you don't you need to install one from the playstore.
If you have cwm, then all you need to do is use ez unlock to unlock your bootloader then you can flash away. Use version 1.2, you likely used 1.4 which doesn't always work.
Sent from my SCH-I535 using Tapatalk 2
BadUsername said:
So confusing....
Ok, so you're on a stock rom right now and you have cwm installed? You must have some type of root enabled, do you have supersu or superuser installed? If you don't you need to install one from the playstore.
If you have cwm, then all you need to do is use ez unlock to unlock your bootloader then you can flash away. Use version 1.2, you likely used 1.4 which doesn't always work.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
I'm really sorry about the confusion.
I came from a stock rooted, "unlocked" rom, it had CWM touch installed. Then I tried to install Hyperdrive.. Install went well via aroma.. But after reboot I got the verizon unauthorized error and I lost access to CWM Touch but I could go into download mode... Now here's where the confusion starts...
I tried to flash back to stock via Odin. Each and every single time it failed after a few files. Believe me I looked for a solution as in several solutions all of which failed until my last flash which also failed but installed a few more files before it failed and I dunno I got CWM Touch back.
Hence the reason why I'm asking if I could fix my phone via CWM because Odin is crazy and Heimdall is also picky.
ojpd said:
I'm really sorry about the confusion.
I came from a stock rooted, "unlocked" rom, it had CWM touch installed. Then I tried to install Hyperdrive.. Install went well via aroma.. But after reboot I got the verizon unauthorized error and I lost access to CWM Touch but I could go into download mode... Now here's where the confusion starts...
I tried to flash back to stock via Odin. Each and every single time it failed after a few files. Believe me I looked for a solution as in several solutions all of which failed until my last flash which also failed but installed a few more files before it failed and I dunno I got CWM Touch back.
Hence the reason why I'm asking if I could fix my phone via CWM because Odin is crazy and Heimdall is also picky.
Click to expand...
Click to collapse
So you can get into download mode just fine? You need to use a better USB cable and try a different port on your computer. It should be able to flash, but if you're using a lower quality cable than what came with the phone it might be your issue.
This guide should work if you can't get a normal flash back to stock work:
http://forum.xda-developers.com/showthread.php?t=1840030
Basically, the only other way I know of to go back to stock without a pc is to use mobile Odin, but that needs root access. There's no file you can flash in recovery to go completely back to stock as it will still leave you with a custom recovery installed.
Sent from my SCH-I535 using Tapatalk 2
I finally got into my rom, after flashing the first boot chain (vralec) Odin messed up again, couldn't flash the 2nd one nor root66 so I pulled my batt and I guess the first vralec gave me stock recovery n just let me boot into my rom, installed twrp and ez unlock 1.2 from there, rebooted into twrp and then installed TkROM.
Thanks for all the help.
Sent from my SCH-I535 using xda app-developers app
Glad it worked out, and nice rom choice.
Sent from my SCH-I535 using Tapatalk 2
Hi – I have a stubborn issue with my Blaze 4G not working on CM roms, I would appreciate any help you guys can provide. Below are the details:
I recently bought a T-Mobile Samsung Galaxy S Blaze 4G, and did the following:
- Rooted it using the following guide (it now has ICS)
- SIM Unlocked it using the following guide (now it works on other networks)
- Updated to CWM 6.0.3.8, since JB roms needs it
- Flashed the T769-UVLH5 modem, since CM support it
And now when I flash CM 10 stable or 10.2 nightly it gets stuck in booting and displaying the CM logo animation screen, after few minutes it reboots and does it all over again.
I remember when I upgraded to CM JB on my SGS3 I needed to flash a JB stock rom on it to get the new boot loaders for JB, but I saw no mention of this on this forum. What else am I missing?
Thanks.
TINGEA said:
Hi – I have a stubborn issue with my Blaze 4G not working on CM roms, I would appreciate any help you guys can provide. Below are the details:
I recently bought a T-Mobile Samsung Galaxy S Blaze 4G, and did the following:
-Rooted it using the following guide (it now has ICS)
-SIM Unlocked it using the following guide (now it works on other networks)
-Updated to CWM 6.0.3.8, since JB roms needs it
-Flashed the T769-UVLH5 modem, since CM support it
And now when I flash CM 10 stable or 10.2 nightly it gets stuck in booting and displaying the CM logo animation screen, after few minutes it reboots and does it all over again.
I remember when I upgraded to CM JB on my SGS3 I needed to flash a JB stock rom on it to get the new boot loaders for JB, but I saw no mention of this on this forum. What else am I missing?
Thanks.
Click to expand...
Click to collapse
You wiped data/cache/system? Reinstall it. Anyways use the new 6.0.4.4 recovery.
Sent from my SAMSUNG-SGH-T769 using Tapatalk
Somcom3X said:
You wiped data/cache/system? Reinstall it. Anyways use the new 6.0.4.4 recovery.
Sent from my SAMSUNG-SGH-T769 using Tapatalk
Click to expand...
Click to collapse
Thanks Somcom. I have to admit that I forgot to do the wipes. but even after doing the wipes (data/system/ factory rest/ cach/devalk) and reinstalling the CM nightly, I still have the same issue.
as for recovery, I updated to the latest version using the rom manager, and according to the official site clockworkmod[dot]com[slash]rommanager (can't post links) I have the latest version for Blaze. how do you get the 6.0.4.4 on blaze?
I still feel it's a ICS vs JB bootloaders issue, but not sure how to proceed next.
Thanks!
TINGEA said:
Thanks Somcom. I have to admit that I forgot to do the wipes. but even after doing the wipes (data/system/ factory rest/ cach/devalk) and reinstalling the CM nightly, I still have the same issue.
as for recovery, I updated to the latest version using the rom manager, and according to the official site clockworkmod[dot]com[slash]rommanager (can't post links) I have the latest version for Blaze. how do you get the 6.0.4.4 on blaze?
I still feel it's a ICS vs JB bootloaders issue, but not sure how to proceed next.
Thanks!
Click to expand...
Click to collapse
No boot loaders man. This is before Samsung's complications.
Recovery is here.
http://d-h.st/AFu
Sent from my SAMSUNG-SGH-T769 using Tapatalk
Thanks Somcom3X, but still didn't work. When installing the CM room in recovery 6.0.4.4 I get a bunch of getprop assert failures. This used to work on the previous version (6.0.3.8). Now the Rom won't install.
Also, I'm curious what did you mean by this is before Samsung's complications?
Thanks
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
TINGEA said:
Thanks Somcom3X, but still didn't work. When installing the CM room in recovery 6.0.4.4 I get a bunch of getprop assert failures. This used to work on the previous version (6.0.3.8). Now the Rom won't install.
Also, I'm curious what did you mean by this is before Samsung's complications?
Thanks
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
After 2011 samsung began installing software and counters to try and prevent people from rooting and installing custom firmwares.
knox is an example of this.
These devices don't have any of that complicated security.
You handy with odin? Your recovery is not right. Just to be clear, what is your model number?
If it is T 7 6 9, your good to go to odin. I'd recommend going back to stock, and then install a recovery and you should be good to go.
Somcom3X said:
After 2011 samsung began installing software and counters to try and prevent people from rooting and installing custom firmwares.
knox is an example of this.
These devices don't have any of that complicated security.
You handy with odin? Your recovery is not right. Just to be clear, what is your model number?
If it is T 7 6 9, your good to go to odin. I'd recommend going back to stock, and then install a recovery and you should be good to go.
Click to expand...
Click to collapse
Thanks again, I use the guide here to convert the image into a tar.md5 to flash using odin, but after flashing successfully I still have the same issue when installing the CM zip file in recovery, and yes it is the T-mobile Samsung Galaxy S Blaze 4G T769.
any other possible causes?
BTW - when I was flashing via Odin my upload phone screen was showing that I have a custom rom and the counter was 1.... do I need to fix that?
TINGEA said:
Thanks again, I use the guide here to convert the image into a tar.md5 to flash using odin, but after flashing successfully I still have the same issue when installing the CM zip file in recovery, and yes it is the T-mobile Samsung Galaxy S Blaze 4G T769.
any other possible causes?
Click to expand...
Click to collapse
SOLUTION:
The reason your stock recovery system keeps getting overwritten at Android startup is because of a script that is being run.* All you need to do is either rename this script or simply delete it.
Please keep in mind that if you restore your stock ROM, this script will be restored with it so you will have to rename or delete it again.* Do the following:*
1.
Make sure your device is powered on and running normally,
2.
Make sure you have rooted your device and that you have all of the necessary permissions in order to manipulate system files.*
3.
In the root file system go to \system\etc
4.
Find the file named install-recovery.sh and either rename it or, as I did, delete it.*
That’s all there is to it.*
Please keep in mind that you will need to flash your custom system recovery one more time after modifying the script file.* After that, reboot away and you will always be able to get back into your new system recovery.
Good Luck and Happy Tweaking.
Click to expand...
Click to collapse
Try that.
Found it here http://mark.candleshoreblog.com/201...-factory-stock-roms-at-android-system-reboot/
Sent from my SAMSUNG-SGH-T769 using Tapatalk
Somcom3X said:
Try that.
Found it here http://mark.candleshoreblog.com/201...-factory-stock-roms-at-android-system-reboot/
Sent from my SAMSUNG-SGH-T769 using Tapatalk
Click to expand...
Click to collapse
Thanks Somcom3X - but I'm not sure this is needed for my case. I read the original blog post and my recovery does not get overwritten. I actually rebooted multiple times into CWM recovery and each time it is the same 6.0.4.4.
I also went into the /system/etc folder and there is no install_recovery.sh file.
to clarify, here is where I'm stuck now:
- when I use CWM 6.0.3.8 CM install completes successfully, but then CM will not boot, and will keep on cycling on the boot logo screen.
- when I use CWM 6.0.4.4 I can't start to install CM as it complained that my phone is not t769.
in all cases I'm using CM 10.2 nightly for T769.
Thanks for the help.
You should delete assert lines at the top of the zip's updater-script and it will let you flash it.
Sent from my SAMSUNG-SGH-T769 using Tapatalk
I removed the assert lines from the updater script, and it was able to complete the install process afterwards, however when I booted the new CM 10.0 system it got stuck on the cyanogenmod boot logo. I made sure I do a system/data rest, cleared cash, and cleared devalk.
I do not think it's an issue with my recovery as I'm getting the same result as I did with the official 6.0.3.8.
Something else is going on.
Any ideas?
Thanks.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
TINGEA said:
I removed the assert lines from the updater script, and it was able to complete the install process afterwards, however when I booted the new CM 10.0 system it got stuck on the cyanogenmod boot logo. I made sure I do a system/data rest, cleared cash, and cleared devalk.
I do not think it's an issue with my recovery as I'm getting the same result as I did with the official 6.0.3.8.
Something else is going on.
Any ideas?
Thanks.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Tar back to stock GB. Upgrade to ICS. Then root and install cwm. Flash away
Sent from my SAMSUNG-SGH-T769 using Tapatalk
Somcom3X said:
You should delete assert lines at the top of the zip's updater-script and it will let you flash it.
Sent from my SAMSUNG-SGH-T769 using Tapatalk
Click to expand...
Click to collapse
Thanks Somcom3X - but this is more trouble than what I wanted to put in - I'll stick with the rooted stock ROM I have. I was hoping the process was a little more straight forward, similar to my SGS3.
thanks for all your help thus far!
Somcom3X said:
Tar back to stock GB. Upgrade to ICS. Then root and install cwm. Flash away
Sent from my SAMSUNG-SGH-T769 using Tapatalk
Click to expand...
Click to collapse
Ok, my rooted ICS stock is acting up (random shutdowns and such), so I need to give this another try and get this phone to CM.
I tared back to stock GB, skipped the upgrade to ICS (was not able to upgrade via the ROM software update option), flashed CWMR (5.0.4.x) via Odin, upgraded to CWMR 6.0.4.5, installed CM 11 nightly, and then wiped data/factory rest and Dalvik .... and ....
it is still stuck on the boot screen....
I seriously would appreciate a silver bullet right now!
TINGEA said:
Ok, my rooted ICS stock is acting up (random shutdowns and such), so I need to give this another try and get this phone to CM.
I tared back to stock GB, skipped the upgrade to ICS (was not able to upgrade via the ROM software update option), flashed CWMR (5.0.4.x) via Odin, upgraded to CWMR 6.0.4.5, installed CM 11 nightly, and then wiped data/factory rest and Dalvik .... and ....
it is still stuck on the boot screen....
I seriously would appreciate a silver bullet right now!
Click to expand...
Click to collapse
Hmm. Go back to stock ics, flash a 10.2 recovery, then flash whatever you desire.
Sent from my SAMSUNG-SGH-T769 using Tapatalk
What is a10.2 recovery? Is it a certain version of CWMR? And do I need to flash it via Odin? Thanks
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
TINGEA said:
What is a10.2 recovery? Is it a certain version of CWMR? And do I need to flash it via Odin? Thanks
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
It would be cwm 6.0.2.7
You can flash the img through a zip or by terminal on the phone.
Odin needs a tar'd recovery img
Sorry been very busy.
Have you tried this?
http://forum.xda-developers.com/showthread.php?t=2577265
Sent from my SAMSUNG-SGH-T769 using Tapatalk
Thanks Somcom3X - I looked all over this forum and the internet, and could not find a link for a 6.0.2.7 CWM for Blaze - I found it for other phones but not Blaze. can you please point me to a link if you happen to know of one. the official site does not have an archived list of previous versions.
as for the provided link, I did follow it through, and downloaded the recovery Tar (it was CWM 5.5.04) but that yielded the same results after installing CM 10 and 10.2 - stuck at boot screen logo. I'm reasonably confident now that it is not a recovery issue, as I flashed half a dozen different versions and none worked with CM 10, 10.2, or 11.... it has to be something else!
Thanks.
TINGEA said:
Thanks Somcom3X - I looked all over this forum and the internet, and could not find a link for a 6.0.2.7 CWM for Blaze - I found it for other phones but not Blaze. can you please point me to a link if you happen to know of one. the official site does not have an archived list of previous versions.
as for the provided link, I did follow it through, and downloaded the recovery Tar (it was CWM 5.5.04) but that yielded the same results after installing CM 10 and 10.2 - stuck at boot screen logo. I'm reasonably confident now that it is not a recovery issue, as I flashed half a dozen different versions and none worked with CM 10, 10.2, or 11.... it has to be something else!
Thanks.
Click to expand...
Click to collapse
I'm very sorry for the delay. Been very very busy.
https://www.dropbox.com/s/awp1zy4u3x34a2v/CWM-cm-10.2-Recovery-t769.zip
That is my personal 10.2 recovery. Works fine for me.
The author is me, but I was too lazy to change the lines.
Sent from my SAMSUNG-SGH-T769 using Tapatalk
Hi guys. I have a Verizon S3 that is out of warranty that I've decided to mess around with since I've already upgraded to a G2. I tried to flash ClockworkMod Recovery using heimdall, but couldn't get it to work. Since I couldn't get heimdall to work, I rooted and installed ROM Manager, then installed ClockworkMod Recovery from there. When I rebooted to get into recovery it says "Verizon has encountered unauthorized software" and wouldn't let me in. I booted normally, then tried to go into recovery from ROM Manager. I get the same message, but now I'm stuck in a recovery loop. I've tried flashing back through heimdall and Odin, but neither one is working for me.
I can get into download just fine, but everything I try to flash with Odin gets me a big FAIL message. Any suggestions? The phone was upgraded to 4.3 before I got a hold of it, which is probably my main issue.
Try flashing ORIGINAL STOCK. You have a locked bootloader and will not be able to install a custom recovery or any custom rom. But, once you're up and running you can root it.
Sent from my SM-T210 using Tapatalk
Chris Kurisu said:
Try flashing ORIGINAL STOCK. You have a locked bootloader and will not be able to install a custom recovery or any custom rom. But, once you're up and running you can root it.
Sent from my SM-T210 using Tapatalk
Click to expand...
Click to collapse
Do you have a link to the original stock files for 4.3? I've looked, but can't find any.
Try this. It worked for me.
http://forum.xda-developers.com/showthread.php?t=2601544
Sent from my SM-T210 using Tapatalk
Worked like a charm. Thanks!
The only thing I can seem to successfully flash is faux123's kernel; not a single ROM has worked. I've tried flashing and wiping cache/data in every imaginable order, reinstalling stock 4.4.2 + stock kernel and flashing from there, installing from CWM 6.0.4.6 and TWRP (haven't tried 6.0.4.7 because I know it won't work), everything. All I ever get are boot logos.
What the hell am I doing wrong?
Sent from my XT1034 using XDA Premium 4 mobile app
Try going back to jelly bean, install CWM for 4.3 bootloader and install CM11 on it without going to kk.
Sent from my XT1032 using Tapatalk
Not sure this is your issue
I've seen a section in here for a corrupted boot loader here maybe that will help.
http://forum.xda-developers.com/showthread.php?t=2623587
I ran the causal root applet on a new SG3 on 4.1.2. Ran root, the unlock script and installed TWRP. Booted into recovery and I got the error for a locked bootloader. I used download mode to get back to the stock rom and then used E-Z unlock to unlock the bootloader. Was able to boot into recovery this time but TWRP read internal and external memory as 0mb, unable to make a backup, and gave a no OS error when went to reboot. I updated TWRP with TWRP manager but the problems are still persistent. Phone boots fine and reboots fine at the moment.
I'm not sure what to do now though. I'm at the point were I don't care if I get stuck with the OTA update but I'm afraid that will brick the phone. I'm not sure what went wrong with TWRP, since this is the second S3 I've rooted.
Any sugestions? I'm afraid to use odin or try anything else since the phone currently works fine. But I'd prefer to not have to sleep in fear it might force the OTA update while I'm asleep and wake up to a bricked phone.
I tried searching, the best I could find is that newer versions of TWRP can't read the memory on a 4.1.2 rom, but the problems were there when I originally started with the recommended version.
Thanks for any help anyone can give.
Try to use cwm or philz and see if you have the same issue.
Sent from my SCH-I535 using Tapatalk 2
Xx
BadUsername said:
Try to use cwm or philz and see if you have the same issue.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
Can you install a different custom recovery over one using the causal applet? I was planning on trying to reinstall TWRP but I wasn't sure if I had to do it a certain way like through odin or Using the unified tool kit?
Thanks for the help so far!
Smogon said:
Can you install a different custom recovery over one using the causal applet? I was planning on trying to reinstall TWRP but I wasn't sure if I had to do it a certain way like through odin or Using the unified tool kit?
Thanks for the help so far!
Click to expand...
Click to collapse
No.
Download latest philz touch recovery d2lte zip, then flash it in recovery, then reboot recovery.
Then check and see if you're getting a similar error message.
Sent from my SCH-I535 using Tapatalk 2
BadUsername said:
No.
Download latest philz touch recovery d2lte zip, then flash it in recovery, then reboot recovery.
Click to expand...
Click to collapse
I can't, recovery doesn't detect my internal or external memory. That's my main issue.
Smogon said:
I can't, recovery doesn't detect my internal or external memory. That's my main issue.
Click to expand...
Click to collapse
OK.
Then download the Odin version and flash through that. Then boot the phone into recovery.
Or download ez recovery, and the latest cwm image file, and flash through that from your rom.
Sent from my SCH-I535 using Tapatalk 2
BadUsername said:
OK.
Then download the Odin version and flash through that. Then boot the phone into recovery.
Or download ez recovery, and the latest cwm image file, and flash through that from your rom.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
I'll try the second option, Thanks!
BadUsername said:
OK.
Or download ez recovery, and the latest cwm image file, and flash through that from your rom.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
I tried CWM and the stock recovery through EZ, both gave the same error as TWRP, unable to mount /
I'm really confused as to whats wrong. At this point I don't care if I get stuck with the OTA 4.3, but I don't want to try to update it with the recovery still not reading either my SD cards.
Any Ideas?
Are you sure of your phone model? I believe it puts it on the screen in download mode and also on a sticker under the battery. I'm mostly curious because you mention that this is a new phone with 4.1.2. Are you trying older versions of cwm as well?
Sent from my SCH-I535 using XDA Premium 4 mobile app
Smogon said:
I ran the causal root applet on a new SG3 on 4.1.2. Ran root, the unlock script and installed TWRP. Booted into recovery and I got the error for a locked bootloader. I used download mode to get back to the stock rom and then used E-Z unlock to unlock the bootloader. Was able to boot into recovery this time but TWRP read internal and external memory as 0mb, unable to make a backup, and gave a no OS error when went to reboot. I updated TWRP with TWRP manager but the problems are still persistent. Phone boots fine and reboots fine at the moment.
I'm not sure what to do now though. I'm at the point were I don't care if I get stuck with the OTA update but I'm afraid that will brick the phone. I'm not sure what went wrong with TWRP, since this is the second S3 I've rooted.
Any sugestions? I'm afraid to use odin or try anything else since the phone currently works fine. But I'd prefer to not have to sleep in fear it might force the OTA update while I'm asleep and wake up to a bricked phone.
I tried searching, the best I could find is that newer versions of TWRP can't read the memory on a 4.1.2 rom, but the problems were there when I originally started with the recommended version.
Thanks for any help anyone can give.
Click to expand...
Click to collapse
by any chance did u try to setup dualboot? I have a similar issue where nothing gets mounted and o mb for storage, .only receovery i get to work is cwm. im pretty sure its a partition issue but idk. i tried flashing pit files for my phone but so far the issue remains.
xevildoerxx said:
by any chance did u try to setup dualboot? I have a similar issue where nothing gets mounted and o mb for storage, .only receovery i get to work is cwm. im pretty sure its a partition issue but idk. i tried flashing pit files for my phone but so far the issue remains.
Click to expand...
Click to collapse
No I just used the causal tool.
dpeeps74 said:
Are you sure of your phone model? I believe it puts it on the screen in download mode and also on a sticker under the battery. I'm mostly curious because you mention that this is a new phone with 4.1.2. Are you trying older versions of cwm as well?
Sent from my SCH-I535 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I'm pretty sure, has all the verizon bloat and logos, also I'm pretty sure the causal applet bricks the international ones. I don't remember the version of twrp that the causal script flashed, but I tried that one, the most recent one, and 2.5 i think from EZ recovery. The stock recovery from EZ has the same issue now though which is what really confuses me. at the moment I have root dissabled and the bootloader is locked and its back with the stock recovery, it still says custom when i reboot the phone though.