Hello,
I'm a fan of CROMi-X but am frustrated that it is still on JB 4.2.1. When is 4.3 coming? I heard that 4.3 adds the TRIM feature, which specifically speeds up the TF700. I've been thinking of switching to PAC because of this but prefer CROMi. Let me know if 4.3 is in the works and if there is an ETA.
there will not be a cromi with 4.3 unless asus releaces a 4.3 for the tf700, or sbdags ports the tf701 rom over. Trim can be enabled via lagfix, you can download the lagfix premium apk online, and get scheduled trimming. TRIM in 4.3 and 4.4 in only for Nexus devices.
Sent from my ASUS Transformer Pad TF700T using XDA Premium HD app
kansasboy001 said:
there will not be a cromi with 4.3 unless asus releaces a 4.3 for the tf700, or sbdags ports the tf701 rom over. Trim can be enabled via lagfix, you can download the lagfix premium apk online, and get scheduled trimming. TRIM in 4.3 and 4.4 in only for Nexus devices.
Sent from my ASUS Transformer Pad TF700T using XDA Premium HD app
Click to expand...
Click to collapse
There has been some discussion over on the CROMi-X main thread about possible data corruption caused by lagfix. See post #3651 and thereabouts on the thread --
http://forum.xda-developers.com/showthread.php?t=2425383
Thanks for the replies. Do you all still recommend CROMi-X over PAC and CM11 for speed? CROMi-X still lags for me, though I'm going to try out 5.3 soon. I'm still on 4.7
sageleader said:
Thanks for the replies. Do you all still recommend CROMi-X over PAC and CM11 for speed? CROMi-X still lags for me, though I'm going to try out 5.3 soon. I'm still on 4.7
Click to expand...
Click to collapse
I can't speak for other ROMs as I haven't tried them but CROMi-X 5.3 works great for me.
sageleader said:
Thanks for the replies. Do you all still recommend CROMi-X over PAC and CM11 for speed? CROMi-X still lags for me, though I'm going to try out 5.3 soon. I'm still on 4.7
Click to expand...
Click to collapse
5.3 is much better optimised than 4.7. Try it, you might be pleasantly surprised
I confirm : 5.3 is far better optimized than 4.7 which was far better optimized than stock.
Sent from my ASUS Transformer Pad TF700T using xda app-developers app
sbdags said:
5.3 is much better optimised than 4.7. Try it, you might be pleasantly surprised
Click to expand...
Click to collapse
Did you ever reach any conclusions about lagfix?
sparksd said:
Did you ever reach any conclusions about lagfix?
Click to expand...
Click to collapse
You could try to use "discard" option to clean up your dirty blocks automaticly instead of running lagfix manually on Cromi X... With discard option, it prevents android slowing down over time. It is just my opinion...
sparksd said:
Did you ever reach any conclusions about lagfix?
Click to expand...
Click to collapse
Yes, while it works I haven't suffered any corruption since I stopped using it. It takes longer to run than it advertising which I suspect causes issues if you reboot when it is still trying to trim the file system.
---------- Post added at 11:33 PM ---------- Previous post was at 11:33 PM ----------
LetMeKnow said:
You could try to use "discard" option to clean up your dirty blocks automaticly instead of running lagfix manually on Cromi X... With discard option, it prevents android slowing down over time. It is just my opinion...
Click to expand...
Click to collapse
Remind me what the discard option is again?
sbdags said:
Remind me what the discard option is again?
Click to expand...
Click to collapse
Here you go master sbdags. Here is the cut and paste on the discard...
discard, nodiscard(*):
Controls whether ext4 should issue discard/TRIM
commands to the underlying block device when
blocks are freed. This is useful for SSD devices
and sparse/thinly-provisioned LUNs, but it is off
by default until sufficient testing has been done.
LetMeKnow said:
Here you go master sbdags. Here is the cut and paste on the discard...
Click to expand...
Click to collapse
And a bit of context: It's a mount option.
_that said:
And a bit of context: It's a mount option.
Click to expand...
Click to collapse
Yeah figured that out but intetwebs thing says it can slow things down as android forced to trim on delete?
sbdags said:
Yeah figured that out but intetwebs thing says it can slow things down as android forced to trim on delete?
Click to expand...
Click to collapse
I've read that too, so I never tried it.
Sent from my ASUS Transformer Pad TF700T using Tapatalk 4
sbdags said:
Yeah figured that out but intetwebs thing says it can slow things down as android forced to trim on delete?
Click to expand...
Click to collapse
Yes, it slows down things a little but you only notice it by bench test... Did you know your tf701 is using it?
---------- Post added at 02:46 AM ---------- Previous post was at 02:44 AM ----------
_that said:
And a bit of context: It's a mount option.
Click to expand...
Click to collapse
Yes, it is... We discussed about it in the Cromi thread a while back....
---------- Post added at 02:47 AM ---------- Previous post was at 02:46 AM ----------
_that said:
And a bit of context: It's a mount option.
Click to expand...
Click to collapse
_that said:
I've read that too, so I never tried it.
Sent from my ASUS Transformer Pad TF700T using Tapatalk 4
Click to expand...
Click to collapse
I am using it on the ET for a while.. I don't see any issue so far...
Related
Kernel for KitKat Based Roms
Latest bryce_r8.zip
Link to old Kernel r7.zip
Check my posts or my [URL="https://github.com/bryce09/android_kernel_asus_tf700t/tree/testing" ]github[/URL] for changelog.
Credits:
- clemysn (It was your work. I have basically taken your changes and incorporated it into the cm 10.1 kernel)
- dasunrule
- Ezkeel
- _that
- blackmambazz
- franciscofranco
- hundsbuah!
- rtfpssessa
Thanks
Not sure why no one said it yet, but thanks. I reinstalled CM10.1 (latest nightly of course) and tried this out. Like you say, 1700 is the max (but I always used 1700 as the max anyway since 1800 just killed the battery). Good to have an o/c gfx. Are you intending to do any more with this? The ability to alter voltages was the main reason I used the clemsyn kernel on CROMI. Also, any chance of a future data2sd/fsync support?
Anyway, once again thanks for your work, and thanks for sharing it too. If you'd like a tester for anything else let me know. Going to try sticking with CM 10.1 for a bit, seems to be getting almost ready for daily use (barring some 2minor" bugs).
bryce09 said:
I have successfully compiled and booted the cyanogenmod 10.1 kernel with a couple of changes (thanks a lot to clemysn!):
Features:
- cpu overclock to 1,8GHz (I dont know where the error is, but i can not set overclock to 1,8GHz. It is not available as a frequency. Maybe someone can help out)
- gpu overclock to 650 MHz
Please report any issues.
Credits:
- clemysn (It was your work. I have basically taken your changes and incorporated it into the cm 10.1 kernel)
- dasunrule
Click to expand...
Click to collapse
Hi !
If you post kernel source code , I could take a look to see , why you can not able to OC up to 1.8GHz !
Yes, I am going to add features. I want to get fsync control running, add row scheduler and undervolting. And I will try to improve overclocking. As this is my first custom kernel for android, it will take some time to look into everything.
surdu_petru said:
Hi !
If you post kernel source code , I could take a look to see , why you can not able to OC up to 1.8GHz !
Click to expand...
Click to collapse
Thank you. I have been trying to upload the source code to git but I have been getting an error, I am gonna solve. Or would it help you if I uploaded the source code as zip file?
Gesendet von meinem ASUS Transformer Pad TF700T mit Tapatalk 2
bryce09 said:
Yes, I am going to add features. I want to get fsync control running, add row scheduler and undervolting. And I will try to improve overclocking. As this is my first custom kernel for android, it will take some time to look into everything.
Thank you. I have been trying to upload the source code to git but I have been getting an error, I am gonna solve. Or would it help you if I uploaded the source code as zip file?
Gesendet von meinem ASUS Transformer Pad TF700T mit Tapatalk 2
Click to expand...
Click to collapse
Code:
git init
git checkout -b <branch>
git add -u
git commit -e
git push <repo_url>
Make sure to have your pub/priv key setup.
Sent from my Galaxy Nexus using xda app-developers app
bryce09 said:
Yes, I am going to add features. I want to get fsync control running, add row scheduler and undervolting. And I will try to improve overclocking. As this is my first custom kernel for android, it will take some time to look into everything.
Thank you. I have been trying to upload the source code to git but I have been getting an error, I am gonna solve. Or would it help you if I uploaded the source code as zip file?
Gesendet von meinem ASUS Transformer Pad TF700T mit Tapatalk 2
Click to expand...
Click to collapse
Also, I would be cautious about using the fsync changes. Danger zone...
Sent from my Galaxy Nexus using xda app-developers app
Also, it may be just my tf700t, but if you switch from balanced to performance mode with this kernel, it slows down tremendously.
I tried this 3 times, rebooting after each attempt. Same result.
dasunsrule32 said:
Also, I would be cautious about using the fsync changes. Danger zone...
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
I like to live life on the edge... a real adrenaline junkie. I've never tried bungee jumping or any extreme sports, but disabling fsync, well that's about as exciting and dangerous as you can get. I love it! :silly:
gcrutchr said:
Also, it may be just my tf700t, but if you switch from balanced to performance mode with this kernel, it slows down tremendously.
I tried this 3 times, rebooting after each attempt. Same result.
Click to expand...
Click to collapse
No, you were right. The cpu clock was stuck at 475 MHz. I fixed it in the lattest build. Thank you for posting!
I uploaded the source code to github. Thank you for your advice dasunrule
bryce09 said:
No, you were right. The cpu clock was stuck at 475 MHz. I fixed it in the lattest build. Thank you for posting!
I uploaded the source code to github. Thank you for your advice dasunrule
Click to expand...
Click to collapse
Are you able to convert this for the tf300t? I know we can run 700 kernels on the 300, not sure if we have to do something in order for this to work...
Sent from my SCH-I605 using Tapatalk 2
Admiral2145 said:
Are you able to convert this for the tf300t? I know we can run 700 kernels on the 300, not sure if we have to do something in order for this to work...
Sent from my SCH-I605 using Tapatalk 2
Click to expand...
Click to collapse
Thats what I was about to ask . Cuz I had to switch back to cm10 version of pa from 4 2.1 cuz I need overclock
Sent from my SCH-I605 using xda app-developers app
Will this run on the tf300t?
Sent from my Galaxy S3
RobbieL811 said:
Will this run on the tf300t?
Sent from my Galaxy S3
Click to expand...
Click to collapse
You do see that i asked and the guy before me and neither of us have gotten a response.
Sent from my Transformer Pad TF300T using xda premium
diamantericos said:
You do see that i asked and the guy before me and neither of us have gotten a response.
Sent from my Transformer Pad TF300T using xda premium
Click to expand...
Click to collapse
Yeah. I know. I was hoping to pull an answer out.
Sent from my Galaxy S3
diamantericos said:
You do see that i asked and the guy before me and neither of us have gotten a response.
Sent from my Transformer Pad TF300T using xda premium
Click to expand...
Click to collapse
It doesn't work. I just tried it. It hangs up at the ASUS boot screen.
Sent from my Galaxy S3
RobbieL811 said:
It doesn't work. I just tried it. It hangs up at the ASUS boot screen.
Sent from my Galaxy S3
Click to expand...
Click to collapse
I could have told you that. Thats why we asked you cant just flash things have to be modified. But did you wipe both caches and fix permissions
Sent from my Transformer Pad TF300T using xda premium
diamantericos said:
I could have told you that. Thats why we asked you cant just flash things have to be modified. But did you wipe both caches and fix permissions
Sent from my Transformer Pad TF300T using xda premium
Click to expand...
Click to collapse
Yes. I wiped everything. I figured it wasn't gonna work. I just wanted to give it a shot. I wanna OC kernel for the 300 lol. Mine just seems real laggy w/ the stock CM10.1 kernel. I'm assuming that you are e,experiencing that also?
Sent from my Galaxy S3
RobbieL811 said:
Yes. I wiped everything. I figured it wasn't gonna work. I just wanted to give it a shot. I wanna OC kernel for the 300 lol. Mine just seems real laggy w/ the stock CM10.1 kernel. I'm assuming that you are e,experiencing that also?
Sent from my Galaxy S3
Click to expand...
Click to collapse
Well, I am sorry but I dont have the time right now to look into overclocking for tf300. I could help you setting everything up and getting it running tho.
bryce09 said:
Well, I am sorry but I dont have the time right now to look into overclocking for tf300. I could help you setting everything up and getting it running tho.
Click to expand...
Click to collapse
That would be cool too. As long as it's not tooo complicated. I have a good understanding of Android & how it works. Do you think it will be something that I will be able to do? What all will I be needing to do?
Sent from my Galaxy S3
bryce09 said:
No, you were right. The cpu clock was stuck at 475 MHz. I fixed it in the lattest build. Thank you for posting!
I uploaded the source code to github. Thank you for your advice dasunrule
Click to expand...
Click to collapse
Hi mate. For me the 1.2 still gets stuck, regardless of power mode on cm 10.1.
I don't have the dock so it's impossible for me to tell is the mod is working or not. Thanks guys!
Sent from my ASUS Transformer Pad TF300T using Tapatalk 2
elesbb said:
I don't have the dock so it's impossible for me to tell is the mod is working or not. Thanks guys!
Sent from my ASUS Transformer Pad TF300T using Tapatalk 2
Click to expand...
Click to collapse
What can I do to help?
tobdaryl said:
What can I do to help?
Click to expand...
Click to collapse
Flash zips in recovery once I create them. Take a backup first as I am not responsible for any bricked tablets or loss of data. However that shouldn't be an issue.
Sent from my ASUS Transformer Pad TF300T using Tapatalk 2
elesbb said:
Flash zips in recovery once I create them. Take a backup first as I am not responsible for any bricked tablets or loss of data. However that shouldn't be an issue.
Sent from my ASUS Transformer Pad TF300T using Tapatalk 2
Click to expand...
Click to collapse
Understood. Let me know when you are ready and any detail you wish for me to have.
tobdaryl said:
Understood. Let me know when you are ready and any detail you wish for me to have.
Click to expand...
Click to collapse
Thanks man. Should have a zip by the end of the day! At school right now
Sent from my ASUS Transformer Pad TF300T using Tapatalk 2
Send it over mate and I'll test it on the TF700 as well.
AW: Need tester for "no docking notification mod"
I hope you considered that the dock notifiation also indicates the amount of battery left in the dock. If we remove that notification there could be a problem with the battery indication of it. But lets see the tests first
ColdKiller93 said:
I hope you considered that the dock notifiation also indicates the amount of battery left in the dock. If we remove that notification there could be a problem with the battery indication of it. But lets see the tests first
Click to expand...
Click to collapse
This is a good point...
but hey its been asked for lol.
And here is the FIRST beta. Any force closes or any issues take a logcat
ADB method (Easiest)
Type:
adb logcat -d -v time > %USERPROFILE%\Documents\NoDockNotifCrash.txt
The log will be in your my documents directory.
Android Terminal Method:
logcat -d -v time > /sdcard/NoDockNotifCrash.txt
The log will be in your ROOT directory of the sdcard.
Then post them AS ATTACHMENT to not copy and paste -.- lol
Let me know how it turned out!
Thanks guys! Maybe someone can donate me a dock? hehe just kidding im not gonna be greedy
Let me know how it turned out!
Thanks guys! Maybe someone can donate me a dock? hehe just kidding im not gonna be greedy [/QUOTE]
No change. Question, one file Transformer.apk in odex system. Is this correct or should it include odex file or should I delete the odex?
tobdaryl said:
Let me know how it turned out!
Thanks guys! Maybe someone can donate me a dock? hehe just kidding im not gonna be greedy
No change. Question, one file Transformer.apk in odex system. Is this correct or should it include odex file or should I delete the odex?
Click to expand...
Click to collapse
only for deodexed right now. once iget it completely figured out then it will become odexed (most likely by the amazing sbdags )
Sent from my ASUS Transformer Pad TF300T using Tapatalk 2
elesbb said:
only for deodexed right now. once iget it completely figured out then it will become odexed (most likely by the amazing sbdags )
Sent from my ASUS Transformer Pad TF300T using Tapatalk 2
Click to expand...
Click to collapse
Thanks I'll load another rom and give it another try.
Let me flash the deodexed version of CROMI (I'm on odexed currently). BRB!
EDIT/UPDATE: I've flashed the current deoxed CROMI (v3.2.2) and the dock notification is gone. Since it is a clean flash no other apps are interfering, and so it seems to work pretty well! Thanks for the possibility to test-drive this. It's a lot more pleasurable when there are no issues to track down -- it seems you've gotten the hang of it? This means I now have a new problem: deciding whether to stay on DEODEXED for now since all those pesky notifications have been eradicated, or return to ODEXED for the (supposed) smoothness... Don't you just looooooove first world problems?
MartyHulskemper said:
Let me flash the deodexed version of CROMI (I'm on odexed currently). BRB!
EDIT/UPDATE: I've flashed the current deoxed CROMI (v3.2.2) and the dock notification is gone. Since it is a clean flash no other apps are interfering, and so it seems to work pretty well! Thanks for the possibility to test-drive this. It's a lot more pleasurable when there are no issues to track down -- it seems you've gotten the hang of it? This means I now have a new problem: deciding whether to stay on DEODEXED for now since all those pesky notifications have been eradicated, or return to ODEXED for the (supposed) smoothness... Don't you just looooooove first world problems?
Click to expand...
Click to collapse
So my first release is working!? On the first try!? Woah sweetness!
Now I have a question. Someone stated the notification holds the battery percentage for the dock. Now say the battery for the dock gets to 14 percent. Do Anton know if there is a window stating the percentage is low? Or any notification?
If not I could possibly make one to notify if the battery gets low.
Sent from my SGH-T999
"So I put my phone into airplane mode and threw it... worst transformer ever. -.-" -My friend
Works properly, no issues.
Thanks. Good Work!
Sweet guys thanks for testing! I will move to development section but keep this thread open for discussion about the dock battery levels.
Sent from my ASUS Transformer Pad TF300T using Tapatalk 2
Me personally to install kernels and such. As I like touchwiz. What about you?
This is meant to hold us at bay while we patiently wait for it.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
I personally like running custom roms, even though this by far the best stock rom I've ever used. Hopefully get a little better battery life with a tweaked stocked rom
Sent from my SAMSUNG-SGH-I337 using xda premium
jetlitheone said:
Me personally to install kernels and such. As I like touchwiz. What about you?
This is meant to hold us at bay while we patiently wait for it.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
Click to expand...
Click to collapse
2 words:
Kernel
Nandroid
That is all lol.
qbanlinxx said:
I personally like running custom roms, even though this by far the best stock rom I've ever used. Hopefully get a little better battery life with a tweaked stocked rom
Sent from my SAMSUNG-SGH-I337 using xda premium
Click to expand...
Click to collapse
I'd like it for custom ROMs, and primarily unlocking stupid AT&T restrictions like blocking hangout video chats!
I like being able to run custom roms. I haven't delved much into kernels yet.
Mainly just want a stock based rom with tweaks and stability as a DD.
Also want to try out cm10.1 and all the other goodies that will be available.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
Here's a random question:
The unlocked S4 that google is launching in June could techncally run a touchwiz ROM, correct?
jbbosu said:
Here's a random question:
The unlocked S4 that google is launching in June could techncally run a touchwiz ROM, correct?
Click to expand...
Click to collapse
I don't think so.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
jbbosu said:
I'd like it for custom ROMs, and primarily unlocking stupid AT&T restrictions like blocking hangout video chats!
Click to expand...
Click to collapse
You can get hangout video over mobile easy. Mod is in dev section I believe. Takes about 3-5 minutes to do.
jbbosu said:
Here's a random question:
The unlocked S4 that google is launching in June could techncally run a touchwiz ROM, correct?
Click to expand...
Click to collapse
It could, it just won't by default.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
So I can actually use the phone as it currently lags like molases in july.
So I can run pure stock stuttery bliss.
Unlocked bootloader + stock rom= Awesomesauce.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
AOSP FTW!!...But really I'd love to run PA especially with what they are doing with halo and all
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
Because I love task650 and ktoonsez.
Sent from my SAMSUNG-SGH-I337 using xda premium
i want it because i like to brick my phone. :fingers-crossed:
seriously...because i want me some aosp and to eliminate this lag.
---------- Post added at 08:15 PM ---------- Previous post was at 08:09 PM ----------
sabre31 said:
So I can actually use the phone as it currently lags like molases in july.
Click to expand...
Click to collapse
^THIS! :good:
Yeah Paranoid Android is amazing, Halo seems sweet, too bad I haven't used it yet
sabre31 said:
So I can actually use the phone as it currently lags like molases in july.
Click to expand...
Click to collapse
At least its not molases in January lol.
_Dennis_ said:
2 words:
Kernel
Nandroid
That is all lol.
Click to expand...
Click to collapse
Exactly, this phone will scream when we get these kernels installed, and I love me some NANDROID!!!!!!!!!!!!!!!!!!!! I miss it DAMN!
---------- Post added at 07:33 PM ---------- Previous post was at 07:32 PM ----------
fix-this! said:
i want it because i like to brick my phone. :fingers-crossed:
seriously...because i want me some aosp and to eliminate this lag.
---------- Post added at 08:15 PM ---------- Previous post was at 08:09 PM ----------
^THIS! :good:
Click to expand...
Click to collapse
Soon as some roms hit, lag will be a thing of the past, although, I haven't seen any lag yet.
It's all about putting a custom recovery on the phone (CWM / TWRP). From there, you can install ROMs, make nandroids, etc...
jbbosu said:
Here's a random question:
The unlocked S4 that google is launching in June could techncally run a touchwiz ROM, correct?
Click to expand...
Click to collapse
Of course it can. As long as you pair it with a TW-based kernel. Just like our stock TW phones can run AOSP with an AOSP-based kernel. Just remember, it's the exact same phone.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
Welcome to the Official CM10.2 discussion thread for Skyrocket, Hercules and Exhilarate devices as supported by Team Chopsticks.
Please search the thread before posting, there are numerous work arounds and fixes for some sporadic issues (such as gallery crashing) that are already documented somewhere in this mess.
Please read our blog for known issues and installation instructions - make sure you have properly followed directions before posting about an issue.
Status - August 30th, 2013:
Official nighlies have begun, please be mindful that you are using a 4.3 compatible recovery when flashing. If in doubt, please ask the developer of the recovery you are using for clarification.
Skyrocket Official:
http://forum.xda-developers.com/showthread.php?t=2412651
Hercules Official:
http://forum.xda-developers.com/showthread.php?t=2412652
Known issues:
http://www.teamchopsticks.org/p/cm102-release-notes.html
car vs driver said:
The leading issue holding us back from releasing an official build (and nightlies) is the known /data & /cache corruption bug. This has been discussed heavily in may threads at this point so I'll be brief ... it appears to be recovery related, in that the filesystem is not being setup properly with recoveries build for CM10.1. At this point, we have engaged several folks from the CM team and have been hard at work to come up with a valid, complete solution. Progress is being made daily.
Click to expand...
Click to collapse
I've heard there is a TWRP 2.6.0.2 floating around somewhere. I haven't been able to find it though. I'm wondering if there might be anything in there to possibly address it?
dotnetguyaz said:
I've heard there is a TWRP 2.6.0.2 floating around somewhere. I haven't been able to find it though. I'm wondering if there might be anything in there to possibly address it?
Click to expand...
Click to collapse
Mikeyman and I are looking through their code now to see if we can build a version to solve the problem. Funny, because I was just talking to someone in IRC about us only supporting CWMR ... :angel: :silly:
Back to cwm, oh hell no. Lol
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
mtdew said:
Dave you know good and well I won't go back to cwm lol.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
Oh quit yer whining... (But I'm with ya. I ABHOR CWM)
---------- Post added at 01:06 PM ---------- Previous post was at 01:00 PM ----------
car vs driver said:
Mikeyman and I are looking through their code now to see if we can build a version to solve the problem. Funny, because I was just talking to someone in IRC about us only supporting CWMR ... :angel: :silly:
Click to expand...
Click to collapse
Meh. If you can't get TWRP working then I guess if we *have* to use CWM. But, like mtdew, we WON'T be happy about it! LOL
dotnetguyaz said:
Oh quit yer whining... (But I'm with ya. I ABHOR CWM)
---------- Post added at 01:06 PM ---------- Previous post was at 01:00 PM ----------
Meh. If you can't get TWRP working then I guess if we *have* to use CWM. But, like mtdew, we WON'T be happy about it! LOL
Click to expand...
Click to collapse
+1
You guys realize we could just pm dees-troy and let him in on the situation I'm sure he'd be happy to help.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
mtdew said:
You guys realize we could just pm dees-troy and let him in on the situation I'm sure he'd be happy to help.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
We been in touch with him on IRC today.
Sent from my SAMSUNG-SGH-I727 using XDA Premium 4 mobile app
So, i'll ask again. Which recoveries got problem with FS corruption? just TWRP?
I've tested 10.2 only with CWM but it was working...
Found bug. Lockscreen shortcuts don't save .. they are still default.
Snoop05 said:
So, i'll ask again. Which recoveries got problem with FS corruption? just TWRP?
I've tested 10.2 only with CWM but it was working...
Found bug. Lockscreen shortcuts don't save .. they are still default.
Click to expand...
Click to collapse
ALL OF THEM your taking a risk it may not have happened yet but if it does nobody wants to hear it because you were warned earlier.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Guys I'm all for wanting 4.3 and being excited, I've been compiling pa. When our device maintainers say something though I listen. I have limited knowledge in how these guys do what they do but if they say don't flash with our current recoveries then don't do it they are running this by the proper channels I'm confident it will be resolved in due time. Talk to devs like @gs2usr and see if he can at least include the recovery.IMG built with the compiles and put a quick tut on his op.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
I'm just gonna hop in here and say thank you to the devs
whosgotlag said:
I'm just gonna hop in here and say thank you to the devs
Click to expand...
Click to collapse
Agreed!
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
can you describe me that FS corruption problem? .... ROM will stuck on boot .... blah blah
FS corruption ---- so reformat partition with corrupted FS
or will it do more? break partition table?
what i need to do after that?
reflash with odin? or got a brick in pocket?
Snoop05 said:
can you describe me that FS corruption problem? .... ROM will stuck on boot .... blah blah
FS corruption ---- so reformat partition with corrupted FS
or will it do more? break partition table?
what i need to do after that?
reflash with odin? or got a brick in pocket?
Click to expand...
Click to collapse
When it hit me I did a factory wipe and full reset/wipe of all partitions and then reflashed and restored /data from a Nandroid backup.
Sent from my Nexus 7 using Tapatalk 4
rpr69 said:
When it hit me I did a factory wipe and full reset/wipe of all partitions and then reflashed and restored /data from a Nandroid backup.
Sent from my Nexus 7 using Tapatalk 4
Click to expand...
Click to collapse
I did this too (except internal sd) and got blank screen after the nandroid. Waited ten minutes, hard rebooted, waited another five or so and it finally sorted itself out. That was a scary fifteen minutes!
so reflash complete FW with Odin is best way? -- to hardly re-flash all partitions
right now i compiled new one, with more cherrypicking, lets try it out
Sorry, when I said wipe all partitions I meant system, data and cache/dalvik-cache, not *every* partition, I guess I should have been more clear.
Would it be safe to manually flash the latest recovery from Koushik and then use that to flash the ROM?
Sent from my Nexus 7 using Tapatalk 4
rpr69 said:
Sorry, when I said wipe all partitions I meant system, data and cache/dalvik-cache, not *every* partition, I guess I should have been more clear.
Would it be safe to manually flash the latest recovery from Koushik and then use that to flash the ROM?
Sent from my Nexus 7 using Tapatalk 4
Click to expand...
Click to collapse
What latest recovery?
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Starymari said:
What latest recovery?
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
Excellent question. I've been trying to find one for 2 hours with no luck...
edit: of course...it's built during the ROM build, not CWM of course, but I should be able to use it to flash CM, no?
I have nothing to do with development of this Rom. For some reason it's not posted here.
I used it with my TF300T. I just got my TF700T, and there is a CyanFox build specific version for our tablet.
Here is the link to the Download page (Just scroll down to TF700T for our buid, and _gapps for the CyanFox related gapps install file):
http://cyanfox-rom.com/downloads/
Here's the homepage (obviously)
http://cyanfox-rom.com/
Just thought I'd share, it's a pretty sweet Rom and deserves to be passed along.
Hopefully it's appreciated.
Take it easy all.
unh1nged said:
I have nothing to do with development of this Rom. For some reason it's not posted here.
I used it with my TF300T. I just got my TF700T, and there is a CyanFox build specific version for our tablet.
Here is the link to the Download page (Just scroll down to TF700T for our buid, and _gapps for the CyanFox related gapps install file):
http://cyanfox-rom.com/downloads/
Here's the homepage (obviously)
http://cyanfox-rom.com/
Just thought I'd share, it's a pretty sweet Rom and deserves to be passed along.
Hopefully it's appreciated.
Take it easy all.
Click to expand...
Click to collapse
how does this compare to cm11
Is it open source?
If not: Why?
berndblb said:
Is it open source?
If not: Why?
Click to expand...
Click to collapse
It is.
How's it run?
kansasboy001 said:
how does this compare to cm11
Click to expand...
Click to collapse
Better in my opinion bro.
mikew29 said:
How's it run?
Click to expand...
Click to collapse
Pretty alright man. It's what I ran as my main Rom on my tf300t.
I did a little research cyan fox is based on cynogen mod, but has some performance tweaks, as well as paranoid android holo notifications and a few other features from pa.
Sent from my ASUS Transformer Pad TF700T using XDA Premium HD app
Hi Guys,
I am using Cromi's 4.2, but I am having issues when using multiple user profiles.
Has anyone had any issues with this ROM?
Many Thanks in advance
IndieAce said:
Hi Guys,
I am using Cromi's 4.2, but I am having issues when using multiple user profiles.
Has anyone had any issues with this ROM?
Many Thanks in advance
Click to expand...
Click to collapse
None yet for me.
What works what does not?
Sent from my SPH-L710 using xda app-developers app
What are the requirements to install?
would love a walk through on how to install
what do i need to do to install?
bud760 said:
What are the requirements to install?
Click to expand...
Click to collapse
unh1nged said:
None yet for me.
Click to expand...
Click to collapse
Is it compatible with rom2sd?
require mets should be the same as for cm11, cyan fox is just a derivative of cm, like cmb.
Sent from my ASUS Transformer Pad TF700T using XDA Premium HD app
---------- Post added at 07:57 AM ---------- Previous post was at 07:47 AM ----------
which are you running, the nightlies, the stable, or the experimental?
Sent from my ASUS Transformer Pad TF700T using XDA Premium HD app
By the way anyone who is interested this is a great rom.
IndieAce said:
Is it compatible with rom2sd?
Click to expand...
Click to collapse
I have not gotten it to work with ROM2SD. Has anyone else even tried this ? It definitely does not work with CROMI-X and ROM2SD, but I use TWRP and I think KitKit has issues with TWRP ??
*shrug*
Thibor69 said:
I have not gotten it to work with ROM2SD. Has anyone else even tried this ? It definitely does not work with CROMI-X and ROM2SD, but I use TWRP and I think KitKit has issues with TWRP ??
*shrug*
Click to expand...
Click to collapse
I believe it does. Don't know for since I no longer have a computer to prepare microsd partitions.
dracinn said:
I believe it does. Don't know for since I no longer have a computer to prepare microsd partitions.
Click to expand...
Click to collapse
The new twrp on sdbags threads works with kitkat. I think both ROMs need kernels that support rom2sd.
mikew29 said:
The new twrp on sdbags threads works with kitkat. I think both ROMs need kernels that support rom2sd.
Click to expand...
Click to collapse
That is correct about kernels. By the way if interested there's Philz CWM available for our tablet http://forum.xda-developers.com/showthread.php?t=2597862
I flashed the latest and it boots but setup wizard closes repeatedly. Are Gapps necessary? I usually test then flash Gapps