Kernel for KitKat Based Roms
Latest bryce_r8.zip
Link to old Kernel r7.zip
Check my posts or my [URL="https://github.com/bryce09/android_kernel_asus_tf700t/tree/testing" ]github[/URL] for changelog.
Credits:
- clemysn (It was your work. I have basically taken your changes and incorporated it into the cm 10.1 kernel)
- dasunrule
- Ezkeel
- _that
- blackmambazz
- franciscofranco
- hundsbuah!
- rtfpssessa
Thanks
Not sure why no one said it yet, but thanks. I reinstalled CM10.1 (latest nightly of course) and tried this out. Like you say, 1700 is the max (but I always used 1700 as the max anyway since 1800 just killed the battery). Good to have an o/c gfx. Are you intending to do any more with this? The ability to alter voltages was the main reason I used the clemsyn kernel on CROMI. Also, any chance of a future data2sd/fsync support?
Anyway, once again thanks for your work, and thanks for sharing it too. If you'd like a tester for anything else let me know. Going to try sticking with CM 10.1 for a bit, seems to be getting almost ready for daily use (barring some 2minor" bugs).
bryce09 said:
I have successfully compiled and booted the cyanogenmod 10.1 kernel with a couple of changes (thanks a lot to clemysn!):
Features:
- cpu overclock to 1,8GHz (I dont know where the error is, but i can not set overclock to 1,8GHz. It is not available as a frequency. Maybe someone can help out)
- gpu overclock to 650 MHz
Please report any issues.
Credits:
- clemysn (It was your work. I have basically taken your changes and incorporated it into the cm 10.1 kernel)
- dasunrule
Click to expand...
Click to collapse
Hi !
If you post kernel source code , I could take a look to see , why you can not able to OC up to 1.8GHz !
Yes, I am going to add features. I want to get fsync control running, add row scheduler and undervolting. And I will try to improve overclocking. As this is my first custom kernel for android, it will take some time to look into everything.
surdu_petru said:
Hi !
If you post kernel source code , I could take a look to see , why you can not able to OC up to 1.8GHz !
Click to expand...
Click to collapse
Thank you. I have been trying to upload the source code to git but I have been getting an error, I am gonna solve. Or would it help you if I uploaded the source code as zip file?
Gesendet von meinem ASUS Transformer Pad TF700T mit Tapatalk 2
bryce09 said:
Yes, I am going to add features. I want to get fsync control running, add row scheduler and undervolting. And I will try to improve overclocking. As this is my first custom kernel for android, it will take some time to look into everything.
Thank you. I have been trying to upload the source code to git but I have been getting an error, I am gonna solve. Or would it help you if I uploaded the source code as zip file?
Gesendet von meinem ASUS Transformer Pad TF700T mit Tapatalk 2
Click to expand...
Click to collapse
Code:
git init
git checkout -b <branch>
git add -u
git commit -e
git push <repo_url>
Make sure to have your pub/priv key setup.
Sent from my Galaxy Nexus using xda app-developers app
bryce09 said:
Yes, I am going to add features. I want to get fsync control running, add row scheduler and undervolting. And I will try to improve overclocking. As this is my first custom kernel for android, it will take some time to look into everything.
Thank you. I have been trying to upload the source code to git but I have been getting an error, I am gonna solve. Or would it help you if I uploaded the source code as zip file?
Gesendet von meinem ASUS Transformer Pad TF700T mit Tapatalk 2
Click to expand...
Click to collapse
Also, I would be cautious about using the fsync changes. Danger zone...
Sent from my Galaxy Nexus using xda app-developers app
Also, it may be just my tf700t, but if you switch from balanced to performance mode with this kernel, it slows down tremendously.
I tried this 3 times, rebooting after each attempt. Same result.
dasunsrule32 said:
Also, I would be cautious about using the fsync changes. Danger zone...
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
I like to live life on the edge... a real adrenaline junkie. I've never tried bungee jumping or any extreme sports, but disabling fsync, well that's about as exciting and dangerous as you can get. I love it! :silly:
gcrutchr said:
Also, it may be just my tf700t, but if you switch from balanced to performance mode with this kernel, it slows down tremendously.
I tried this 3 times, rebooting after each attempt. Same result.
Click to expand...
Click to collapse
No, you were right. The cpu clock was stuck at 475 MHz. I fixed it in the lattest build. Thank you for posting!
I uploaded the source code to github. Thank you for your advice dasunrule
bryce09 said:
No, you were right. The cpu clock was stuck at 475 MHz. I fixed it in the lattest build. Thank you for posting!
I uploaded the source code to github. Thank you for your advice dasunrule
Click to expand...
Click to collapse
Are you able to convert this for the tf300t? I know we can run 700 kernels on the 300, not sure if we have to do something in order for this to work...
Sent from my SCH-I605 using Tapatalk 2
Admiral2145 said:
Are you able to convert this for the tf300t? I know we can run 700 kernels on the 300, not sure if we have to do something in order for this to work...
Sent from my SCH-I605 using Tapatalk 2
Click to expand...
Click to collapse
Thats what I was about to ask . Cuz I had to switch back to cm10 version of pa from 4 2.1 cuz I need overclock
Sent from my SCH-I605 using xda app-developers app
Will this run on the tf300t?
Sent from my Galaxy S3
RobbieL811 said:
Will this run on the tf300t?
Sent from my Galaxy S3
Click to expand...
Click to collapse
You do see that i asked and the guy before me and neither of us have gotten a response.
Sent from my Transformer Pad TF300T using xda premium
diamantericos said:
You do see that i asked and the guy before me and neither of us have gotten a response.
Sent from my Transformer Pad TF300T using xda premium
Click to expand...
Click to collapse
Yeah. I know. I was hoping to pull an answer out.
Sent from my Galaxy S3
diamantericos said:
You do see that i asked and the guy before me and neither of us have gotten a response.
Sent from my Transformer Pad TF300T using xda premium
Click to expand...
Click to collapse
It doesn't work. I just tried it. It hangs up at the ASUS boot screen.
Sent from my Galaxy S3
RobbieL811 said:
It doesn't work. I just tried it. It hangs up at the ASUS boot screen.
Sent from my Galaxy S3
Click to expand...
Click to collapse
I could have told you that. Thats why we asked you cant just flash things have to be modified. But did you wipe both caches and fix permissions
Sent from my Transformer Pad TF300T using xda premium
diamantericos said:
I could have told you that. Thats why we asked you cant just flash things have to be modified. But did you wipe both caches and fix permissions
Sent from my Transformer Pad TF300T using xda premium
Click to expand...
Click to collapse
Yes. I wiped everything. I figured it wasn't gonna work. I just wanted to give it a shot. I wanna OC kernel for the 300 lol. Mine just seems real laggy w/ the stock CM10.1 kernel. I'm assuming that you are e,experiencing that also?
Sent from my Galaxy S3
RobbieL811 said:
Yes. I wiped everything. I figured it wasn't gonna work. I just wanted to give it a shot. I wanna OC kernel for the 300 lol. Mine just seems real laggy w/ the stock CM10.1 kernel. I'm assuming that you are e,experiencing that also?
Sent from my Galaxy S3
Click to expand...
Click to collapse
Well, I am sorry but I dont have the time right now to look into overclocking for tf300. I could help you setting everything up and getting it running tho.
bryce09 said:
Well, I am sorry but I dont have the time right now to look into overclocking for tf300. I could help you setting everything up and getting it running tho.
Click to expand...
Click to collapse
That would be cool too. As long as it's not tooo complicated. I have a good understanding of Android & how it works. Do you think it will be something that I will be able to do? What all will I be needing to do?
Sent from my Galaxy S3
bryce09 said:
No, you were right. The cpu clock was stuck at 475 MHz. I fixed it in the lattest build. Thank you for posting!
I uploaded the source code to github. Thank you for your advice dasunrule
Click to expand...
Click to collapse
Hi mate. For me the 1.2 still gets stuck, regardless of power mode on cm 10.1.
Related
PRIME 1.5 Version
http://www.multiupload.com/ZQCQ0YU3MM
MD5: cfba1e5ddf57428b6b50d60256933bf3
Older Version
PRIME 1.4 Version:
http://www.multiupload.com/8J3LYJS7GF
MD5: c507425e44fb9ee9eb5408e16dbf7cc6
Let me know if you have any issues
--jhanford
Perfect if only my TF was delivered today instead of on monday but will use this after trying custom kernels thanks!
When it gets here I'm thinking just to flash sc's repackaged 3.1 vs prime and pretty much run stock.. well maybe oc a little bit.
But it seems stock repackaged hc3.1 is providing the best user experience.
amerikian said:
Perfect if only my TF was delivered today instead of on monday but will use this after trying custom kernels thanks!
When it gets here I'm thinking just to flash sc's repackaged 3.1 vs prime and pretty much run stock.. well maybe oc a little bit.
But it seems stock repackaged hc3.1 is providing the best user experience.
Click to expand...
Click to collapse
Super's stock 3.1 repack is the best I you could say ROM. Stock with Superuser!!! But I dont see why you cant flash any of the other OC kernels on top of the Stock repack, its rooted same as any other rooted ROM. Actually before I read this I was thinking of flashing Blades on 3.1 repack]
EDIT: says file is unavailable
Awesome thanks man! Is there any way you can provide an MD5 for this as well? I grabbed it from MegaUpload, but want to make sure it's 100% valid.
Thx again!
Sent from my rewted Prime! Transformer TF101 with PCB Blue Theme using XDA Premium App
scar45 said:
Awesome thanks man! Is there any way you can provide an MD5 for this as well? I grabbed it from MegaUpload, but want to make sure it's 100% valid.
Thx again!
Sent from my rewted Prime! Transformer TF101 with PCB Blue Theme using XDA Premium App
Click to expand...
Click to collapse
Updated OP with MD5
Sent from my Transformer TF101 using XDA Premium App
I just tried to install via CWM and its a no go. It says installation aborted. [bad].
This came at the right time the other day and since I forgot to say "thanks", here it is, better late than never.
bighuta said:
I just tried to install via CWM and its a no go. It says installation aborted. [bad].
Click to expand...
Click to collapse
Did you check the MD5?
Sent from my Transformer TF101 using XDA Premium App
e-motion said:
This came at the right time the other day and since I forgot to say "thanks", here it is, better late than never.
Click to expand...
Click to collapse
You're welcome. T'was but a little thing
Sent from my Transformer TF101 using XDA Premium App
Thanks for this. Now I dont have any issues checking out the OC kernel.
This just saved my bacon, I flashed Netarchy via Kernel Manager and ended up in a boot loop.
Thanks so much for posting this
If u want to use Ps3 controller or any other gaming controller u need this stock Kernel, it wont work with overclock kernel
Anyway to get Primes! 1.5 kernel in a flashable too?
any chance you can host this elsewhere? I've been getting "This service is temporarily not available from your service area." with megaupload since forever D:
thanks
yellowchilli said:
any chance you can host this elsewhere? I've been getting "This service is temporarily not available from your service area." with megaupload since forever D:
thanks
Click to expand...
Click to collapse
Mirror:
http://www.4shared.com/file/frNaqOj6/ASUS_Transformer_31_Kernel_Onl.html
got it thank you
Uploaded PRIME 1.5 Kernel
Both downloads now on multiupload.com - should fix download issues
Hello guys and gals,
I am rooted and running sky ics.
I have downloaded setcpu and I notice my Max freq is only 1.5GHz
I changed min freq since I don't and never have liked any CPU down clocking.
But as far as overclocking, am I limited to 1500mhz? Or is there something I'm missing?
Thanks guys
Shawnj0
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
For overclock instal cymbaline/mohan_kr kernel.
Also next time please post in Q&A forums.
kishke said:
For overclock instal cymbaline/mohan_kr kernel.
Also next time please post in Q&A forums.
Click to expand...
Click to collapse
Thank you
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
kishke said:
For overclock instal cymbaline/mohan_kr kernel.
Also next time please post in Q&A forums.
Click to expand...
Click to collapse
And I'm guessing overclocking is the same as PC overclocking?
For example maybe for me I can only hit 1.7ghz and others might be fine at 1.9ghz?
Or am I pretty much going to be OK at 1.9ghz?
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Every device has different hardware someone can run 1.9 great and you'll get crushes, you can only know if you try. Technically 1.9 should be fine.
kishke said:
Every device has different hardware someone can run 1.9 great and you'll get crushes, you can only know if you try. Technically 1.9 should be fine.
Click to expand...
Click to collapse
Just as a test I'm running 1.7 and no problems thus far. Scared to try 1.9 lol.
EDIT I tried 1.83ghz and no go. Phone rebooted
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Check in the kernel thread there are script for setting OC and volts, the guy talked about certain voltage for 1.83 that worked great maybe you could try it.
kishke said:
Check in the kernel thread there are script for setting OC and volts, the guy talked about certain voltage for 1.83 that worked great maybe you could try it.
Click to expand...
Click to collapse
Thanks dude. I took a quick look but I'm still new to this forum and I seek to overlook everything. Any chance you could quote or link me to it?
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Seem*
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
First of all you can edit your posts so don't double post, second here's the link: http://forum.xda-developers.com/showpost.php?p=29456487&postcount=376
next time use the search function.
In his posts he links to his OC and other scripts original post.
so it looks like 1832MHz won't go, it almost did, but it probably needs MOAR volts.
1782 is running stability test right now and seems to be fine. I didn't need a stability test to tell me that, since I ran 1730 or something all day without a problem.
Just testing for the heck of it.
Oh yeah and I'm using the scripts. Thanks for the link man.
Shawnj0
Go here for info:
http://forum.xda-developers.com/showthread.php?t=1927729
I'll make a better post when I get home
it's amazing,never ever saw this!i'll try tomorrow to port 4g roms on gsm in my gnex!
sert00 said:
it's amazing,never ever saw this!i'll try tomorrow to port 4g roms on gsm in my gnex!
Click to expand...
Click to collapse
Just so you know, this only works between TFS and between gs3s
Otherwise u need some tweaking
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
I'm confused, I can now port TF101 ROMs to the TF101¿
st0nedpenguin said:
I'm confused, I can now port TF101 ROMs to the TF101¿
Click to expand...
Click to collapse
And the tf300t and tf prime
And u can port from the tf700t but u have to resize all the images
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
cpu999 said:
And the tf300t and tf prime
And u can port from the tf700t but u have to resize all the images
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
Oh well that seems a lot more useful, porting to same device sounded pretty weird.
Ok, on the OP for the SGS3 you state that the ARM rev needs to be the same, which for all 4 tabs, it is (ARMv7-A). Having said that, all the processors are different than that on the 101. Would this not cause issues?
At this point I am curious because I would certainly love to have a stock JB rom to my 101 (I simply cannot get used to the idea of AOSP on my devices.... plus most apps simply quit (not FC but actually quit) on most JB roms I've tried )
Also, I would love to write about this on the Portal, but I will need for you to make a bit of a more comprehensive OP (and some d/l links would be nice too )
egzthunder1 said:
Ok, on the OP for the SGS3 you state that the ARM rev needs to be the same, which for all 4 tabs, it is (ARMv7-A). Having said that, all the processors are different than that on the 101. Would this not cause issues?
At this point I am curious because I would certainly love to have a stock JB rom to my 101 (I simply cannot get used to the idea of AOSP on my devices.... plus most apps simply quit (not FC but actually quit) on most JB roms I've tried )
Also, I would love to write about this on the Portal, but I will need for you to make a bit of a more comprehensive OP (and some d/l links would be nice too )
Click to expand...
Click to collapse
By armv7 or armv6 I'd it boot loops just get a log cat and replace what's broken
And no need to put on portal, my sgs3 one was there once already
Sent from my EPAD using Tapatalk 2
Starting this thread for non kernel development related discussion. This is for the Cymbaline-3.0 Kernel. The development thread is:
Cymbaline-3.0 Kernel
What is sysfs?
Sent from my SAMSUNG-SGH-I727 using xda premium
ian1 said:
What is sysfs?
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
Think of it as the "settings" app for the kernel. It allows you to configure or change the values (e.g. cpu/voltage..etc) at runtime. Unless you build an app, you can use std. shell scripts to change the value and run the script at boot time so it says persistent during reboots..
mohan_kr said:
Think of it as the "settings" app for the kernel. It allows you to configure or change the values (e.g. cpu/voltage..etc) at runtime. Unless you build an app, you can use std. shell scripts to change the value and run the script at boot time so it says persistent during reboots..
Click to expand...
Click to collapse
Sorry been away for awhile where can I find it?
Sent from my SAMSUNG-SGH-I727 using xda premium
ian1 said:
Sorry been away for awhile where can I find it?
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
Here is the link from the dev thread from Mohan.
http://forum.xda-developers.com/showthread.php?t=2183157
UV
Skyrocket2 said:
Here is the link from the dev thread from Mohan.
http://forum.xda-developers.com/showthread.php?t=2183157
Click to expand...
Click to collapse
Anyone done any undervolting yet on this new kernel? Just curious about your results.
26.2man said:
Anyone done any undervolting yet on this new kernel? Just curious about your results.
Click to expand...
Click to collapse
Undervolted - 50 across the board, smartassv2, noop. Probably could have got another hour of on screen time, easy. Plus no Wifi.
Hey Mohan was just wondering if you'd be willing to add the patches to incorporate faux sound control in your next build perhaps? If not no worries...
https://play.google.com/store/apps/...xsound&feature=nav_result#?t=W251bGwsMSwyLDNd
Putting in a request for BLN.
also what is every one else using for an alternative if any?
I tried noLED but didn't really like it.
Thanks.
Qawnman said:
Putting in a request for BLN.
also what is every one else using for an alternative if any?
I tried noLED but didn't really like it.
Thanks.
Click to expand...
Click to collapse
Not sure if serious
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Mohans signature says Cymbaline 3.4, but I dont see a download link in the main thread?
skyrockets said:
Mohans signature says Cymbaline 3.4, but I dont see a download link in the main thread?
Click to expand...
Click to collapse
test driving it..will release over the weekend..
I usually undervolt everything 25-50, underclock to the min on both cpus and overclock them to about 1.7 ghz, always leave sammy governors, and usb fast charge is the ****. Idk how much it really affects my battery life as I haven't had the time to do real comparisons, but I'll get 30 hours with about 4.5 hours of screen time.
I'm running a frankenbuilt, rwc stockbased rom over top of 3.5 and am getting killer sleep stats as well as smoother/faster ui performance, which is exceptional given the dirty config my test rom has atm. Props, bud.
Sent from my SGH-I727R using Tapatalk 2
@mohan_kr
The
* [12-APR-2013] CYMBALINE-JB-RD04-3.5.zip (md5sum: a6996bec2a22a17148e3e2263d0d2b32)
Link is Dead Please Does anyone Have the File
Also I noticed that the T989 CymbaLine Got to version RD04 3.8
Can I use it on The AT&T?
...
.
Phatboyj420 said:
@mohan_kr
The
* [12-APR-2013] CYMBALINE-JB-RD04-3.5.zip (md5sum: a6996bec2a22a17148e3e2263d0d2b32)
Link is Dead Please Does anyone Have the File
Also I noticed that the T989 CymbaLine Got to version RD04 3.8
Can I use it on The AT&T?
...
.
Click to expand...
Click to collapse
If no one else links for u...I'll check after I get back home.
Edit....all credit to OP
https://www.dropbox.com/s/s0ru25nmuk3gnmp/CYMBALINE-JB-RD04-3.5.zip?dl=0
https://www.dropbox.com/s/8uw54iivuut0200/CYMBALINE-JB-RD03-3.1.zip?dl=0
Qawnman said:
If no one else links for u...I'll check after I get back home.
Click to expand...
Click to collapse
:good:
Much appreciated
I have nothing to do with development of this Rom. For some reason it's not posted here.
I used it with my TF300T. I just got my TF700T, and there is a CyanFox build specific version for our tablet.
Here is the link to the Download page (Just scroll down to TF700T for our buid, and _gapps for the CyanFox related gapps install file):
http://cyanfox-rom.com/downloads/
Here's the homepage (obviously)
http://cyanfox-rom.com/
Just thought I'd share, it's a pretty sweet Rom and deserves to be passed along.
Hopefully it's appreciated.
Take it easy all.
unh1nged said:
I have nothing to do with development of this Rom. For some reason it's not posted here.
I used it with my TF300T. I just got my TF700T, and there is a CyanFox build specific version for our tablet.
Here is the link to the Download page (Just scroll down to TF700T for our buid, and _gapps for the CyanFox related gapps install file):
http://cyanfox-rom.com/downloads/
Here's the homepage (obviously)
http://cyanfox-rom.com/
Just thought I'd share, it's a pretty sweet Rom and deserves to be passed along.
Hopefully it's appreciated.
Take it easy all.
Click to expand...
Click to collapse
how does this compare to cm11
Is it open source?
If not: Why?
berndblb said:
Is it open source?
If not: Why?
Click to expand...
Click to collapse
It is.
How's it run?
kansasboy001 said:
how does this compare to cm11
Click to expand...
Click to collapse
Better in my opinion bro.
mikew29 said:
How's it run?
Click to expand...
Click to collapse
Pretty alright man. It's what I ran as my main Rom on my tf300t.
I did a little research cyan fox is based on cynogen mod, but has some performance tweaks, as well as paranoid android holo notifications and a few other features from pa.
Sent from my ASUS Transformer Pad TF700T using XDA Premium HD app
Hi Guys,
I am using Cromi's 4.2, but I am having issues when using multiple user profiles.
Has anyone had any issues with this ROM?
Many Thanks in advance
IndieAce said:
Hi Guys,
I am using Cromi's 4.2, but I am having issues when using multiple user profiles.
Has anyone had any issues with this ROM?
Many Thanks in advance
Click to expand...
Click to collapse
None yet for me.
What works what does not?
Sent from my SPH-L710 using xda app-developers app
What are the requirements to install?
would love a walk through on how to install
what do i need to do to install?
bud760 said:
What are the requirements to install?
Click to expand...
Click to collapse
unh1nged said:
None yet for me.
Click to expand...
Click to collapse
Is it compatible with rom2sd?
require mets should be the same as for cm11, cyan fox is just a derivative of cm, like cmb.
Sent from my ASUS Transformer Pad TF700T using XDA Premium HD app
---------- Post added at 07:57 AM ---------- Previous post was at 07:47 AM ----------
which are you running, the nightlies, the stable, or the experimental?
Sent from my ASUS Transformer Pad TF700T using XDA Premium HD app
By the way anyone who is interested this is a great rom.
IndieAce said:
Is it compatible with rom2sd?
Click to expand...
Click to collapse
I have not gotten it to work with ROM2SD. Has anyone else even tried this ? It definitely does not work with CROMI-X and ROM2SD, but I use TWRP and I think KitKit has issues with TWRP ??
*shrug*
Thibor69 said:
I have not gotten it to work with ROM2SD. Has anyone else even tried this ? It definitely does not work with CROMI-X and ROM2SD, but I use TWRP and I think KitKit has issues with TWRP ??
*shrug*
Click to expand...
Click to collapse
I believe it does. Don't know for since I no longer have a computer to prepare microsd partitions.
dracinn said:
I believe it does. Don't know for since I no longer have a computer to prepare microsd partitions.
Click to expand...
Click to collapse
The new twrp on sdbags threads works with kitkat. I think both ROMs need kernels that support rom2sd.
mikew29 said:
The new twrp on sdbags threads works with kitkat. I think both ROMs need kernels that support rom2sd.
Click to expand...
Click to collapse
That is correct about kernels. By the way if interested there's Philz CWM available for our tablet http://forum.xda-developers.com/showthread.php?t=2597862
I flashed the latest and it boots but setup wizard closes repeatedly. Are Gapps necessary? I usually test then flash Gapps