Database Info

Rom Maneger bricket my phone ((??!!))

Hi guys
I've rooted a Ouku Horizon (P801W) and make a backup with Titaniun Backup Pro to my SDcard of all System and User apps and data.
I wanted to flash a new rom so I get Rom Manager and to backup my current rom (just in case) I installed the flash ClockWorkMod recovery ( I supose that was the first mistake, as I did not get from the list of phones my P801W I install another one)
Then I did "Backup Current Rom" and when the phone reboots it took forever freeze at booting in Ouku logo over black screen.
I soud backup the rom manualy but I didn't
Now I won a brick? or is recoverble?
hard reset (home buton + sound down + Power on) don't get me in to recover mode just no mather what I do it freeze at boot Orku logo.
Please help!!!!
can Odin software be a solution to flash the original or other rom again to the phone?
thanks guys

Yes odin should fix the problem just download original firmware and flash it with odin. Sorry usually i find the tut but now dont have much time.

thanks suki
I'll give it a try

does any one know how to put a Orku Horizon in download mode?
I tried all combinations of butons that I think of and no luck...
any insight?

I supose that Odin is a solution to my nerly bricket phone.
I should flash a recovery or a new compatible rom(?)
unfortunately from Ouku manufactory I can't get any kind of realy technical answer.
so I dont know how to proced with Odin...
my specs are:
Model number - P801W
Android 2.2.2
baseband version iris_p800 v1.20
Kernel 2.3.35.7perf.
[email protected]#3
Build nº FRG83G
software version Iris-p801W_v.21
Hardware version Iris_MP
any insight???????
pls

If you want an official rom just flash the rom using odin.
And for custom roms flash first CWM recovery, and then the rom you like.

I don't mind to put a custom rom in it, unfortunately I don't have any idea wich Rom to use.
If I put Cyanogenmod or Miui and if it is incompatible with Ouku Horizon android phone dont I brick it definitively?
does those custom roms support dual sim?
another thing is that I suppose I bricked my phone when I install a non specific CWM to Orku Horizon (P801W) through Rom Manager
because when it ask for the phone model mine wasn't listed so I chose a model that I tough was a generic...
(what a dumb ass!!!)
thanks a lot for your help Suky08

ROM for OUKU P801W
You can download the firmware for OUKU P801W on: Forum.China-iPhone.Ru

envenenador, have you tried the last tip?
how did it go?
and how did you manage to boot your phone. superclickone keeps on not working.
same with universal androot...

Help ! Please!

Hey guys , I am pretty much new to this stuff want some guidance on 'Rooting the device'
Here are the details of my phone
Model : GTI9003
firmware 2.3.6
Baseband I9003DDLE1
Build number Gingerbread DDLF2
Kernel version 2.6.35.7-CL1153545
[email protected]#1
I just need a small brief step by step description on how to root my device , and if the rooting is unsuccessful is it possible to revert the process?
Rahul

refer to this thread http://forum.xda-developers.com/showthread.php?t=1331253

pratik_s said:
refer to this thread http://forum.xda-developers.com/showthread.php?t=1331253
Click to expand...
Click to collapse
So now i have DDFL2 i should choose
"DDLF2_CFROOT-05-07-2012.tar (CWM 5.0.2.8)
DDLF2-CFROOT-30-06-2012.tar "
?
and how do we work with .tar files?

Use the latest one ... DDLF2_CFROOT-05-07-2012.tar
You need to flash it using odin.

laksy said:
So now i have DDFL2 i should choose
"DDLF2_CFROOT-05-07-2012.tar (CWM 5.0.2.8)
DDLF2-CFROOT-30-06-2012.tar "
?
and how do we work with .tar files?
Click to expand...
Click to collapse
.
use the latest, download the odin and on the PDA field click it and find the CF ROOT.tar that u downloaded..and flash it to ur phone.. make sure u're phone is in download mode simultaneosly press vol down+home button+power button..after flashing the tar file wait till it reboots..
hit the thanks button if i helpde u..:laugh:

Working!
I tested this rooting on my Galaxy SL I9003 with latest Indian update I9003DDLE1 and it works fine.
Download Odin from
http://dl.xda-developers.com/attach...1781bc67/5013aa18/5/8/1/9/1/3/Odin3-v1.85.zip
I ran into some errors with latest version of Odin. V1.85 worked just fine.

1. Download Odin v1.8.3 or grater (it is a single .exe file) and CFRoot for DDLF
2. run it with Administrative Privelages (win 8/7/Vista)
3. restart your phone in Download Mode by pressing [Vol Down + Home + Power button for > 3 sec] a yellow Exclamation Mark will come on your mobile's Screen.
4. connect your phone(Wait for drivers to get installed) and now in Odin you can see a yellow small block with Com : **
5. click the Bootloader tab and cselect the downloaded file (*.tar)
6. Click Start and it will auromatically flash and reboot your phone , and That's It !!
You are Now Rooted !!
NOTE :: Do not tangle with any settings other than what is there in the screen shorts ..
!! DO IT ON YOUR OWM RISK !!
Click Thanks if you like it )
laksy said:
Hey guys , I am pretty much new to this stuff want some guidance on 'Rooting the device'
Here are the details of my phone
Model : GTI9003
firmware 2.3.6
Baseband I9003DDLE1
Build number Gingerbread DDLF2
Kernel version 2.6.35.7-CL1153545
[email protected]#1
I just need a small brief step by step description on how to root my device , and if the rooting is unsuccessful is it possible to revert the process?
Rahul
Click to expand...
Click to collapse

[Q] getting old stock rom?

I recently flashed a custom rom(Jana Rom) on my samsung G-fit. But i'm facing some lagging problem in this rom. now i want to switch back to my
stock rom.
How can i get the old stock rom of samsung g-fit and how to flash that rom on my device.
Do i need to do it woth the odin or just copy the zip file and do recovery mode technique ?
and where will i get the zip of the old stock rom.
I recently upgraded my G-fit from foryo to GB and i have that 'GT-S5670_INU_S5670DDKT1_S5670ODDKT1_S5670DDKT1' do i need to do the odin procedure with this file or what?
Thanks.

vikrantnegi007 said:
I recently flashed a custom rom(Jana Rom) on my samsung G-fit. But i'm facing some lagging problem in this rom. now i want to switch back to my
stock rom.
How can i get the old stock rom of samsung g-fit and how to flash that rom on my device.
Do i need to do it woth the odin or just copy the zip file and do recovery mode technique ?
and where will i get the zip of the old stock rom.
I recently upgraded my G-fit from foryo to GB and i have that 'GT-S5670_INU_S5670DDKT1_S5670ODDKT1_S5670DDKT1' do i need to do the odin procedure with this file or what?
Thanks.
Click to expand...
Click to collapse
Depends.
If you want to completely revert to factory settings (that means removing CWM recovery too) then use ODIN method.
If you wish to flash other roms in future then I suggest you to flash pure stock roms by Raj Joshi from android developement section.
Simply flash those like normal roms through recovery.
Tip: Flash CM7,miniCm7 and their derivatives for better performance. Stock roms are always laggy. (atleast for me)

Procedure and Happy Flashing
vikrantnegi007 said:
I recently flashed a custom rom(Jana Rom) on my samsung G-fit. But i'm facing some lagging problem in this rom. now i want to switch back to my
stock rom.
How can i get the old stock rom of samsung g-fit and how to flash that rom on my device.
Do i need to do it woth the odin or just copy the zip file and do recovery mode technique ?
and where will i get the zip of the old stock rom.
I recently upgraded my G-fit from foryo to GB and i have that 'GT-S5670_INU_S5670DDKT1_S5670ODDKT1_S5670DDKT1' do i need to do the odin procedure with this file or what?
Thanks.
Click to expand...
Click to collapse
Hi @vikrantnegi007,
You can find the required ODIN Firmware Package as you wish for the ODIN tool
http://www.sammobile.com/firmwares/ and put in the Device Model Number and download it
or complete Firmware Package of Gingerbread 2.3.6 DDKT3 you can find the link below
http://hotfile.com/dl/146050815/b3b9278/S5670DDKT3_S5670ODDKT2_INU.zip.html in case this link doesn't work please download the Packages from above link as I can't check it from my office so dntmnd
For ODIN Flashing Tool:
http://www.downloads.techdiscussion.in/software/download-odin-rooting-software/
and Procedure to Flash is:
- Shutdown Galaxy Fit and restart it in Recovery Mode. For that hold the volume down key + Home key and power key. Hold it for some seconds and leave it. The device will boot in recovery mode. When the yellow triangle, connect cell phone and a computer with a USB cable.
- Launch ODIN on your system. In that look under ID:COM section. The section will turn to yellow once the device is connected and detected.
- Now click on OPS. It will ask you to browse the downloaded firmware package. Browse to GIO_1.0.ops. Once it is selected click on One Package and choose S5670DDKT3_S5670ODDKT2_S5670DDKT2_HOME.tar.md5.
- Now click on Start. The update process has started and it will take few minutes to complete.
- Once it is done, the device will reboot itself. Later on you can go in Settings and checkout the firmware version.

[Q] Stock recovery- help

Hi guys. I need some help with my samsung galaxy s2 plus i9105p.
I want to unroot it, so i Return to factory settings. but didn't work. i did a backup via clock work mod before the process of rooting. but i need to send my phone to warranty and i want to be clean. full clean
In download mode it appears current bin: custom and system status:custom. i want original..please help me
i think i need to delete clock work mode. the restore via clock work mode didn't work.
bandwidth: i9105PXXAMC1
version number: JZO54K.I910PXXAMC2
OS: 4.1.2, romanian;
gt-i9105p
please help me!

you can flash stock rom via odin followed by a factory reset in cwm .. this way you'll not face any fc's on your stock rom .. you can get the original firmware and the recovery only if you flash the stock via odin .. though you might increase the flash counter in your download mode ... download the compatible rom and odin for your device and flash it via odin .... correct me if i am wrong and please do ask if any problem occurs or if you did not understand something ... all the best and happy Flashing

[Completed] Unbricking Galaxy S2

Hey XDA Devs,
I have an old S2 on which I was trying to downgrade Android from CM12.1 to CM11.
CM12.1 had somehow installed it's own recovery console; using which I couldn't have flashed CM11, so for installing CM11 I tried to flash "CWM-KitKatCompatible-i9100" using ODIN 1.85.
The flash completed successfully but then my phone died. It doesn't even get into download mode or recovery mode anymore.
Also, while installing CWM, I flashed the PIT file "omap4_all_20110627_emmc.pit" as it was instructed on http://forum.xda-developers.com/galaxy-s2/general/how-to-root-install-cwm-recovery-flash-t1814801.
Is there any way to revive my phone?
I've already tried jig, even that doesn't work.
I need to get some data from my phone. Even if that's possible somehow?
Thanks,
- V

Hello Dear ,
If ur device get to booted to downloading mode i suggest u to flash stock rom with factory fw through odin here is 2 link for that rom
4.0.3
http://www.mediafire.com/download/etttzxwacsv3dg8/Galaxy+S2+i9100+Full+Factory+Rom+4.0.3.docx
4.1.2
https://mega.nz/#!LEF1AYqB!lMr2S90aZY_MChswC2pLdX4Zva11K6WVG9_WA8yNdNg
For how to flash it here some screenshots ,
https://www.google.com/search?q=how...ved=0ahUKEwj1696-mb_JAhWENxQKHVkTAb0Q_AUICCgE
Last chance for u if this not working for u then only one way 100% it's should work its via box like z3x box on any service center near u ok ..
Hope this will help You,
Thank You ,