[Q] Stock recovery- help - Samsung Galaxy S II Plus

Hi guys. I need some help with my samsung galaxy s2 plus i9105p.
I want to unroot it, so i Return to factory settings. but didn't work. i did a backup via clock work mod before the process of rooting. but i need to send my phone to warranty and i want to be clean. full clean
In download mode it appears current bin: custom and system status:custom. i want original..please help me
i think i need to delete clock work mode. the restore via clock work mode didn't work.
bandwidth: i9105PXXAMC1
version number: JZO54K.I910PXXAMC2
OS: 4.1.2, romanian;
gt-i9105p
please help me!

you can flash stock rom via odin followed by a factory reset in cwm .. this way you'll not face any fc's on your stock rom .. you can get the original firmware and the recovery only if you flash the stock via odin .. though you might increase the flash counter in your download mode ... download the compatible rom and odin for your device and flash it via odin .... correct me if i am wrong and please do ask if any problem occurs or if you did not understand something ... all the best and happy Flashing

Related

Rom Maneger bricket my phone ((??!!))

Hi guys
I've rooted a Ouku Horizon (P801W) and make a backup with Titaniun Backup Pro to my SDcard of all System and User apps and data.
I wanted to flash a new rom so I get Rom Manager and to backup my current rom (just in case) I installed the flash ClockWorkMod recovery ( I supose that was the first mistake, as I did not get from the list of phones my P801W I install another one)
Then I did "Backup Current Rom" and when the phone reboots it took forever freeze at booting in Ouku logo over black screen.
I soud backup the rom manualy but I didn't
Now I won a brick? or is recoverble?
hard reset (home buton + sound down + Power on) don't get me in to recover mode just no mather what I do it freeze at boot Orku logo.
Please help!!!!
can Odin software be a solution to flash the original or other rom again to the phone?
thanks guys
Yes odin should fix the problem just download original firmware and flash it with odin. Sorry usually i find the tut but now dont have much time.
thanks suki
I'll give it a try
does any one know how to put a Orku Horizon in download mode?
I tried all combinations of butons that I think of and no luck...
any insight?
I supose that Odin is a solution to my nerly bricket phone.
I should flash a recovery or a new compatible rom(?)
unfortunately from Ouku manufactory I can't get any kind of realy technical answer.
so I dont know how to proced with Odin...
my specs are:
Model number - P801W
Android 2.2.2
baseband version iris_p800 v1.20
Kernel 2.3.35.7perf.
[email protected]#3
Build nÂș FRG83G
software version Iris-p801W_v.21
Hardware version Iris_MP
any insight???????
pls
If you want an official rom just flash the rom using odin.
And for custom roms flash first CWM recovery, and then the rom you like.
I don't mind to put a custom rom in it, unfortunately I don't have any idea wich Rom to use.
If I put Cyanogenmod or Miui and if it is incompatible with Ouku Horizon android phone dont I brick it definitively?
does those custom roms support dual sim?
another thing is that I suppose I bricked my phone when I install a non specific CWM to Orku Horizon (P801W) through Rom Manager
because when it ask for the phone model mine wasn't listed so I chose a model that I tough was a generic...
(what a dumb ass!!!)
thanks a lot for your help Suky08
ROM for OUKU P801W
You can download the firmware for OUKU P801W on: Forum.China-iPhone.Ru
envenenador, have you tried the last tip?
how did it go?
and how did you manage to boot your phone. superclickone keeps on not working.
same with universal androot...

[Completed] [Q] samsung galaxy mega 6.3 i 9205

good day everyone!
would like to seek help about my phone..my phone is running a custom rom called megafire mj running in 4.2.2 jellybean when i decided to flash stock rom 4.4.2 kitkat using odin..i fallow the step in flashing and odin app says reset after flashing the stock rom 4.4.2 i downloaded from samsung update. my phone rebooted and i put my phone to recovery mode to reset to factory defaults and even clear cache, when the the phone booted up i am ask to choose the language but when i try to select the language i prefer touch screen is not responding..now i cannot use my phone...i bring it to the technician and they flashed another stock rom but still the touchscreen is not reponding. before the flashing of stock rom im not facing this king of issue on my phone, only happens when i flashed kitkat stock rom.. my question is would it be possible to flash back the custom rom megafiremj to my phone? or can i flash back 4.2.2 stock rom from 4.4.2 kitkat? pls help...
im within the metro here in manila,philippines, would be thankful if someone from the metro who can help me to make my phone usable again...
Hi,
I suggest you ask the experts who own your device in this dedicated help thread in your device section,
http://forum.xda-developers.com/showthread.php?t=2329215
Good luck!

[Completed] Unbricking Galaxy S2

Hey XDA Devs,
I have an old S2 on which I was trying to downgrade Android from CM12.1 to CM11.
CM12.1 had somehow installed it's own recovery console; using which I couldn't have flashed CM11, so for installing CM11 I tried to flash "CWM-KitKatCompatible-i9100" using ODIN 1.85.
The flash completed successfully but then my phone died. It doesn't even get into download mode or recovery mode anymore.
Also, while installing CWM, I flashed the PIT file "omap4_all_20110627_emmc.pit" as it was instructed on http://forum.xda-developers.com/galaxy-s2/general/how-to-root-install-cwm-recovery-flash-t1814801.
Is there any way to revive my phone?
I've already tried jig, even that doesn't work.
I need to get some data from my phone. Even if that's possible somehow?
Thanks,
- V
Hello Dear ,
If ur device get to booted to downloading mode i suggest u to flash stock rom with factory fw through odin here is 2 link for that rom
4.0.3
http://www.mediafire.com/download/etttzxwacsv3dg8/Galaxy+S2+i9100+Full+Factory+Rom+4.0.3.docx
4.1.2
https://mega.nz/#!LEF1AYqB!lMr2S90aZY_MChswC2pLdX4Zva11K6WVG9_WA8yNdNg
For how to flash it here some screenshots ,
https://www.google.com/search?q=how...ved=0ahUKEwj1696-mb_JAhWENxQKHVkTAb0Q_AUICCgE
Last chance for u if this not working for u then only one way 100% it's should work its via box like z3x box on any service center near u ok ..
Hope this will help You,
Thank You ,

Sw rev check fail..pls pls pls help very urgent

I am getting sv res check failed while i was trying to flash stock rom through odin..i have tried all the processes...bt nothing is helping me out...pls help its very urgent...i request.
Rupayan said:
I am getting sv res check failed while i was trying to flash stock rom through odin..i have tried all the processes...bt nothing is helping me out...pls help its very urgent...i request.
Click to expand...
Click to collapse
Give some photo plz.. ? Are U click oky On usb dubbing and Oem Unlock? and properly Install driver on pc?
I think the bootloader is locked....actually this has happened during flashing the marshmallow russian rom...now my phone is not booting up.
Pls pls help.its very urgent.
Rupayan said:
Pls pls help.its very urgent.
Click to expand...
Click to collapse
marshmallow rom available for J700H not J700F
So what to do now?
If nothing passed during the flash you can try to flash the last official stock firmware you had on your phone as long as nothing has updated to the marshmallow version before you tried to update if you was on lollipop before this then try to reflash the last official stock firmware you had already installed. The bootloader isnt locked or it wouldnt of made your knox counter 1 from 0. If odin flashing stock doesnt work then you need to use smart switch to do a emergency recovery. Im use to kies recovery but it says smart switch on your screen shot.
That official stock rom is also not flashing after i flashed a5 rom...after installing the a5 rom all these problems are arising. I was not being able to come back to the stock rom after the installation of the a5 rom long back ago.
Pls anybody give any solution...
http://forum.xda-developers.com/tmo...p/flash-stock-firmware-using-samsung-t3079176
Use smart switch then. This is why you only flash stuff made for your phone.. flashing roms for other phones will brick you. Your lucky your even able to restore it should be hard bricked.
Hi
I faced the same problem recently , it happens coz u are trying to downgrade to a lower version of bootloader , if you have a backup restore it without checking (efs/modem) or make a flashable zip of ur original stock rom without sboot...cm...modem.bin files
The easy solution is to flash russian lp via odin

J500FN with Nougath

Hey developers!
Sorry, i am new here, sorry for any error, which i may do. So, about question i have Samsung Galaxy J500FN (j5nltexx) i want to get nougat update, i still wait and didnt get I have plan, how to install unofficial nougat on my phone. I already try it, but i "brick" my phone and i put it into repair center, and there they flash stock firmware (i havent access for original firmware directly from samsung sorted by imei and s/n, i can flash firmware). Then i have very big fear about my phone. I told myself "never do it again" XD. So i have newer plan how to install it. But dont know if will run it correctly.
1. Flash TWRP via Odin
2.I have android 7 for j5nltexx (J516 Serenity) from XDA
3. Wipe system.
4. Install J516Serenity.zip
5. After Instalation wait for system config
6. Flash Stock recovery back
When i do it for first, my phone turns on FRP and after restart i got screen "Custom Binary Blocked by FRP" Then i didnt know what do. I go to service center for original firmware. Now is on my phone stock firmware.
Now. I know that FRP doesnt support Custom Binary (TWRP). And this issue i want resolve by flash original recovery, but will phone run with unofficial android and stock recovery?? (I should to extract recovery.img from originalfirmware.tar). Please tell me for any better or safest step by you experience. I repeat again J516 Serenity has been already installed and worked excellently but FRP lock block restart phone with TWRP. And i dont know if i can flash stock recovery on unofficial system. Thank you soo much. :angel:

Categories

Resources