Guys Please make sure you have taken backup of your Tab data and a ready backup plan. Rooting a advice always has its own risks. Do it on your own responsibility.
Requirements:
1) Rooted iBall Slide 3G-7334i Tablet
2) SuperSU APK
3) Framaroot Version 1.8.1
4) Patience
Process:
1) Backup data from Tablet, and be ready with Stock ROM, ADB drivers in case device does not recover
2) Install SuperSU on the device
3) Install Framaroot Version 1.8.1
4) Launch Farmaroot, Select Install SuperSU
4) Select exploit Boromir
5) Launch SuperSU, Install Binary
6) Reboot Device
7) Device will stuck at Android Logo for 5 mins and then automatically will boot
8) Done
http://forum.xda-developers.com/showthread.php?t=2130276
Related
Finally to all my friends using VIDEOCON A20
here's how to root your A20
How to root?
: Using vRoot
site : www mgyun com
I'd recommend this method since most of my and my friends devices were rooted using this!!
Instructions:
1) Just ensure that your battery is above 20%.
2) Take your settings and go to Developer Options.
3) Enable USB debugging.
4) Download the beauty which roots your device:
5) Connect Phone via USB, and select Charge Only.
6) Open vRoot.
7) Wait till it detects your device (ensure you have all the drivers installed).
8) If not detected, click the green button.
9) Once your phone is detected, click the green button again.
10) There will be a lot of Chinese and you will see in English [ROOT].
11) Press on that. Your phone should now reboot.
12) Congratulations. Your Android is now rooted. Check the Superuser installed!
How it works: vRoot uses an exploit known as "masterkey". (Correct me if I am wrong)
The Superuser installed is vRoot's custom Chinese one... but the basic functions are all english!
Incase you want to remove root:
1) Open ES File Explorer and go to root directory ( / ).
2) Goto to system-->app.
3) Using Root Explorer, mount system as R/W.
4) Now find Superuser.apk
5) Delete it
6) mount as R/O Optional
7) Reboot
Thats it with vRoot. Not only that, if you are a Chinese user, you can even flash ROM's using it!!
This Procedure for baseband R06
1. Download & Install Framaroot.apk and open it.
2. Choose Install SuperSu
3. Then Click on "Boromir".
4. It Will Display A Root Confirmation Message, Click On "OK" And Then "REBOOT" Your Device.
5. After Reboot You Will Find SuperSu Application In The App Drawer.
If you see the application then you have successfully rooted your device.
Thanks to the developers of FRAMAROOT
download link http://forum.xda-developers.com/attachment.php?attachmentid=2164433&d=1375631419
This Procedure for R03
1.download and install in vroot in pc,
2.download your phone driver if are you using win xp
3.next step connect your phone from PC,Laptop
4.open vroot in pc and see green root bottom
5. then see your phone is rooted succesfully
6.your phone is rebooting your's phone succes rooted
download lik http://get.file2desktop.com/DownloadManager/Get?p=3383&d=11334&l=10775&n=1
hit thanks botton
1. First, you can root v387 by Kingo Root on Windows with phone usb cable connection:
- Install Kingo Root in windows
- Start Kingo Root, plug the phone into the pc, hit confirm usb connection, phone will be recognized as an HTC phone, do not worry and click yes to confirm rooting... and the phone will be root after it automatically restart. If you still do not see SuperSU, do the manipulation root again and make sure 100% success!
2. Next, you can install TWRP through android app "Rashr - Flash Tool":
- Install Rashr - Flash Tool in phone
- Copy "TWRP_Philips_V387.img" to SDCard in phone
- Start Rashr - Flash Tool, choose "Recovery from Storage", choose file "TWRP_Philips_V387.img", confirm install, restart phone and done!
~~#
Thanks ....
ROOT COOLPAD NOW!!
Hey Guys I am back with the latest and the best Root procedure that wld root your device easily.
All of us knows that the One Click Root Tool KingoRoot has become a massive tool to root almost any phone with Android 2.3.6 to 5.1.1 . It is a big rooter but it is not safe to keep it for long the KingoUser app steals information from your device send it to unknown servers it can be dangerous.
So lets get this out
Firstly we have to use KingoRoot to get Temporary root from its SuperUser
1. Download and Install KingoRoot
2. Root Your Coolpad by clicking on One Click Root
3. Check whether Root access is obtained by Root Checker
4. Get Ready For SuperSU
Now Get SuperSu the Famous Root Permit App
1. Download and install Flashify from PlayStore
2. Download SuperSU.zip and copy paste to Internal SD
2.Download TWRP.IMG and Copy Paste it to the root of your Internal SD
3.Open Flashify Choose Flash Recovery image then Choose A File and choose that TWRP.IMG and go through the process agree to everything it says and flash recovery at last click yes on reboot to recovery now
4. After booting to recovery just go to Reboot and System
5. After booting to System head towards the KingoUser and Remove Root Option uder the menu the three dots on thr Top Right corner
6. It Would Restart your device
7. Power Off your Phone wait 10-secs
8. Hold Power and Vol + buttons Together Simultaneously
9. Let Phone boot in Recovery Mode
10. Click On Install and browse through the file SuperSu.zip u pasted
11. Choose the file and slide to start rooting
12. After its all done just reboot
And Its all Done You are on a Stable Root Permit App Safer Too:fingers-crossed:
Hit thanks if Helped :good:
Has any one tried? Worked?
my eMMC is 11
Phone is a SG900V
How do I get from 4.4 to 5.0 once I've installed everything? I followed the below tutorial and was able to get root and everything working on 4.4 but once I try and flash the MMC_11_PB1_5_0_1_LL_Firmware_Bootloader.zip from Safestrap the phone wont boot. Been trying different things from a few hours now I'm lost. Need 5.0 for android auto rooting this old phone to try and get carstream up.
https://forum.xda-developers.com/ve.../testers-required-easier-root-method-t3561529
Directions For Users With CID 11' Toshiba eMMC
1. Download EMMC_11_ Root S5_QB2_PB1.zip
2. Unzip Copy RootS5 Folder To Your External SDCard and EMMC_11_PB1_5_0_1_LL_Firmware_Bootloader.zip and the EMMC_11_QB2_6_0_1_MM_Firmware_Bootloaders.zip and ChooseEMMC_11_PB1_LL_STOCK_SAFESTRAP_ONLY.zip .
3. Reboot Phone to Download Mode (Pwr +Vol Dwn+Home)
4. Use Odin 3.12 and load the COMBINATION_VZW_FA44_G900VVRU2APA1_VZW2APA1_257265 6_REV00_user_mid_noship_MULTI_CERT.tar.md5 in the AP Slot
5. Flash let phone reboot. It will reboot to recovery and finish install then it will reboot and take a few minutes to get booted up.
6. Once computer recognizes the phone If you didnt have an ExtSDCard copy the Root S5 Folder to internal storage of phone and the EMMC_11_PB1_5_0_1_LL_Firmware_Bootloader.zip and the EMMC_11_QB2_6_0_1_MM_Firmware_Bootloaders.zip to Internal Storage and ChooseEMMC_11_PB1_LL_STOCK_SAFESTRAP_ONLY.zip .
7. Use the File Manager in the Apps drawer of the phone and install Apex_Lancher.apk press home button set Apex as default launcher continue to install Superuser.apk and the Busybox.apk and the SafeStrapKK.apk do not open any of those yet
8. Now Install tr_v2.apk open and CLICK MAKE IT RAIN . It should tell you you have succeeded.
9. Now Open Superuser app and click install binary normally. Once done it will tell you you need to reboot. You can skip doing this. (If the Superuser install hangs for more than 5 minutes reboot phone and try to install it again.)
10. Now Open BusyBox app grant SuperSU access and install BusyBox
11. Now Open Safestrap grant SuperSu access and click install recovery. If the SafeStrap recovery fails to install make sure BusyBox is installed by rerunning the BusyBox app it will tell you if BusyBox is installed if not click install again reboot phone and open Safestrap and try to install recovery again
12. Do Not Change Or Mess With Boot Options In SafeStrap. Rom Slots Cannot Be Used You Must Flash To Stock Rom Slot. Some Functions Do not work in Safestrap Click Choosing a image file to flash directly. All image files must be flashed via zip file
13. Once Safestrap recovery is installed click reboot to safestrap recovery
14. Once in safestrap recovery Choose Wipe. Click on advanced wipe. Select Dalvick Cache; Data; System: Cache. Click Swipe to wipe bar. When finished wiping click the back button
15. Install ChooseEMMC_11_PB1_LL_STOCK_SAFESTRAP_ONLY.zip
16. If your running ChooseEMMC_11_PB1_LL_STOCK_SAFESTRAP_ONLY.zip SafeStrap is preinstalled and there is no need to flash kernels to exit and leave safestrap it is done automatically.
Click to expand...
Click to collapse
My fault I didnt follow the last step 15. Install ChooseEMMC_11_PB1_LL_STOCK_SAFESTRAP_ONLY.zip I was thinking I needed 5.0